he Summer in the City program, part of the Portland School of Architecture and Allied Arts (an extension to University of Oregon).
Using both Grasshopper and the Firefly plug-in, this workshop will focus on the design of innovative facade prototypes that are configurable, sensate, and active. Students will become familiar with the terminology used in interactive facade design including an overview of hardware (ie.sensors, actuators, and programmable microcontrollers) as well as software interfaces terminology. We'll learn new prototyping techniques and develop digital and physical models which can respond to a plurality of environmental and user driven forces. This workshop will take a hands-on approach, and you will walk away with the ability to build your own custom electronic circuits (using the Arduino), as well as create interactive simulations and models.
This course will primarily focus on physical computing techniques. Unfortunately, given the time constraints of the workshop, I will not be able to provide an extensive overview of the Grasshopper interface (it is suggested that participants have some familiarity with the Rhino/Grasshopper environment). There are many great online resources to get you up to speed relatively quickly if you are new to this software. This is a good place to start.
The course will be held at the School of Architecture and Allied Arts in Portland, OR. The date/times of the workshop are as follows:
Friday July 19, 5:00-7:50 P.M.
Saturday July 20, 9:00 A.M.-3:50 P.M.
Sunday July 21, 1:00-3:50 P.M.
If you are a designer, architect, or anyone who is interested in learning about the digital tools and technology trends that are revolutionizing design today, this workshop is for you. Make sure to click here to find out more about registration and enrollment in this exciting new workshop.…
ing ways to leverage simulation results from ladybug and inform design of building envelops with benefits that can be modeled. Given 20 percent of the cost of a project typically goes to the facades, and maybe a half of that goes to the openings, there is a good enough reason to question how to materialize that 10 percent, which can result in 10-30 percent difference in total energy comsumption.
I think ideally radiation analysis, natural ventilation and daylight analysis on floors should all inform opening sizes and placements, as well as the building sections at large. However natural ventilation seems to be the most complicated one because it couples airflow and thermo dynamics. I have a definition setup so that I can batch simulations for radiation analysis and daylight analysis, but natural ventilation is the missing link. So for what I am doing now I will select a handful of design that seem to work the best based on the two available analysis and convert all the geometry into CAD files so that I can run them in an evaluation copy of autodesk simulation CFD. So for now I can do this in 2 stages.
But for the future, given the possibility of actually have that as a part of grasshopper feature, which would be lovely, I want to understand the science behind it and share some links.
(http://www.wbdg.org/resources/naturalventilation.php) In this link the author outlines quite a few general principles and variables to consider for natural ventilated buildings.
For example, how stack effect works.
Qstack = Cd*A*[2gh(Ti-To)/Ti]^1/2, where
Qstack = volume of ventilation rate (m³/s)Cd = 0.65, a discharge coefficient.A = free area of inlet opening (m²), which equals area of outlet opening.g =9.8 (m/s²). the acceleration due to gravityh = vertical distance between inlet and outlet midpoints (m)Ti = average temperature of indoor air (K), note that 27°C = 300 K.To = average temperature of outdoor air (K)
The thing about natural ventilation is that not only the sizes and positioning of openings of the facade facing predominant wind matter, but also the openings on the other side matter. The vertical distance between the inlets and outlets also need to be taken into account. The author suggests that naturally ventilated buildings should be no wider than 45 feet.
and in this pdf presentation it discusses CFD for natural ventilation and illustrates why it is not easy
http://isites.harvard.edu/fs/docs/icb.topic882838.files/L17.6205Airflow-Modeling_Ibarra.pdf
and in this pdf briefly outlines the approach taken by designbuilder
http://isites.harvard.edu/fs/docs/icb.topic472869.files/DesignBuilder%20Simulation%20Training_HSD.pdf
Lastly a wide spectrum of environmental analysis works by e3lab
http://www.e3lab.org/research
http://www.e3lab.org/green-buildings
If I make progress on a way to tie the three analysis together (radiation, daylight and natural ventilation), I wont forget to post it on this thread.
Thanks.…
mers considering extreme sports reject mainstream retailers and like to check out small stores rather of at chains plus malls. Several smaller retailers discuss trends in sports shoe sales. http://skateszone.com/
Though athletic shoes and sports stores and from doorways retailers have reported somewhat uptick in footwear sales due to the increase in extreme sports, the particular beneficiaries inside the trend are independent surf and skate niche stores.
Some West Coast surf and skate shops stated teenagers and even more youthful Generation Xers are not only rejecting traditional sports, but they're also shunning mainstream retailers and malls meant for smaller niche shops transporting hard-to-come-by brands.
Eddie Miyoshi, district manager at Atomic Garage, a 3-store chain situated in Gardena, Calif., stated the soaring recognition of skateboard footwear has boosted the retailer's total footwear business 20-thirty percent this year, rather of '95.
Skate footwear presently represent 80-90 % of Atomic Garage's shoe sales, while couple of years back, Dr. Martens and Timberland drove the retailer's footwear business.
Like many retailers, Miyoshi pointed to Airwalk since the trend's catalyst.
However, if Airwalk broadened its distribution to larger chains, which are frequently located in malls, only a few skate shoe customers adopted. Rather, many youthful males have switched for your skate shops for additional elusive brands like Etnies, Duffs, and Electricity Footwear by Circus. By refusing to market bigger retailers or sports stores, these brands are increasing their cachet among youthful consumers.
"Kids don't want stuff which have been within the shops,In . Miyoshi added.
Searching ahead, Miyoshi forecasted skate shoe sales will remain strong through spring '97 provided "the [hot] vendors don't auction other [non-particularly shop] retailers."
"Skaters and non-skaters are rebelling against mainstream retailers so on to surf and skate shops for many looks," echoed Mark Richards, co-online sources Val Surf, a 3-store chain situated in North Hollywood, Calif. Soaring sales of skate footwear have driven total footwear receipts up 25 percent this year rather of '95.
"The quantity of that increase might be connected while using exposure of maximum games? I am unsure. [Skate footwear] may also be actually the think about the moment,In . Richards acknowledged. And in relation to getting this right look, youthful customers can be very picky.
"Skateboard footwear is a huge category for people, but we're not able to own the brands, Etnies, Duffs, Electricity and Nice, simply because they won't sell us," stated Mark Anderson, buyer at Chick's Sports, a six-store chain in Covina, Calif. "We have people coming every single day requesting them." Consequently, skate footwear have consistently ongoing to obtain about 5 % of Chick's overall footwear business. http://skateszone.com/the-top-8-best-skateboards-for-beginners-reviews-2017/
Nonetheless, some outdoors, niche sports and sports retailers are noting the growing recognition and coverage of maximum sports will receive a modest impact on footwear sales. Trailrunning footwear and approach/outdoors crosstrainers will be the two groups benefiting the very best inside the recognition. Like the skate shoe business, some retailers realize that styling instead of function frequently drives sales of individuals footwear.
"At this time the merchandise is a lot more visual than function," stated Chet James, gm of Super Jock 'N Jill, Dallas, speaking about trailrunning footwear. Still, James noted the current hype over adventure sports helps draw more customer traffic. "The marketing campaigns and media help bring growing figures of people in, nonetheless they frequently occasions day an issue that increases results on their own account,Inch he conceded.
John Wilkinson, executive vp inside the 85-store chain Track 'N Trail, Eldorado Hillsides, Calif., stated the shop has "seen some activity in approach footwear," but he requested the amount of consumers depend in it commercially sport. And, instead of accelerating total footwear business, Wilkinson speculated elevated sales of approach footwear and trailrunners are gnawing away at traditional hiking shoe and boot volume.
But Dan Bazinet, president of Overland Exchanging, a 34-store chain situated in Westford, Mass., believes the company-new looks have breathed existence for the wilting hiking boot category. "[Approach-type footwear] don't represent the lion's participate the hiking market, nonetheless they have elevated the hiking business and provided us extra sales," Bazinet stated.
He designated Timberland's Treeline Series and Rockport's Leadville line as strong performers. Unsurprisingly, he noted the company-new looks are attractive to youthful consumer base than traditional hikers.
For that month of June, sales of men's hikers were up 49 percent at Overland, rather of June '95, while sales of women's hikers were up 17 % for that month. Bazinet also attributed elevated sales that shops walked inside the hiking business, departing that business for that specialists.
Some retailers draw a good example concerning the hiking boom of two yrs ago combined with the current extreme sport phenomenon. "Plenty of bigger chains will get a specific percent in the industry while [extreme] sports remain a fad because they are selling cost-point type gear," described Steven Carre, assistant hard goods buyer at Adventure 16, a six-store chain situated in Hillcrest.
"However individuals [true enthusiasts] will say `we need real gear' and may shown up at us. That will help us after a while. What Size Skateboard good for an 3 4 5 6 7 8 9 10 11 12 13 14 year old
…
ur setup. Can you say what sensor you are using? Are you using an Arduino to write this ascii information to the serial port? If so, there may be some formatting code for the string that you'll need to do to get the Read component to function properly. I see that you were able to open the port and Start reading... so my first thought is that the data is formatted correctly....
All of the read components look for a specific character (in this case two characters) to indicate when it has reached the end of the line being read and should spit out the data. In this case, Firefly uses the Carriage Return (\r) and Line Feed (\n) to know when it has reached the end of the line. In arduino, these are automatically added to any line if you use the Serial.println("blah, blah, blah"); command. Notice, this is different from the Serial.print("nothing to see here"); command. This doesn't mean that you can't still use the regular print command... it's just you need to use the println command to indicate when you've reached the end of the line. Let's take a look at a simple example.
void setup() { Serial.begin(9600);}void loop() { int sensorValue = analogRead(A0); Serial.print("The value of the sensor is: "); Serial.println(sensorValue);
delay(20); // important to wait some small time so you aren't sending just a ton of info over to GH which will cause it to crash :(
}
The first print statement prints a string to the serial port... and the next one adds the current sensor value... and THEN adds the carriage return and line feed to start a new line. The nice thing about using these together is that you can concatenate any type of data you want. If you were to upload this sketch, you should see a sentence being printed to the serial port that says "The value of the sensor is: 512". I made up the number, but you get the idea. Notice, I also had to include a delay function. You don't always need this (there are other ways to go about this) but the important thing to note is that the loop cycle on the Arduino can run really fast. I mean... really fast. So, you wont want to send so much data over to GH, because this could flood the string buffer in the Read component and cause it to crash (eventually). It's a good idea to add some small time interval just to slow it down a bit. I should say that I've optimized the refresh rate in the next release so it's significantly faster... so hopefully this wont be as big of a problem... but hopefully that helps some.
Now... Why are you writing data to a sensor? Sensors by default are considered inputs... so I'm quite confused as to why you would want to send data back (if you are... then you need some way to handle the string data being sent from GH... this is the whole reason we built the Firefly firmata... it sets up the two-way protocol so you don't have to deal with all of that mess... If you're going to read and write, you're better off just uploading the firmata and using the Uno Read and Write components). Also, I'm not very familiar with the Hyperterm or Advanced Serial Port Terminal... but I will say that could get COM conflicts if you're trying to open the port with different tools. Anyway, I hope some of this helps you get up and running.
Cheers,
Andy
…
d the workshop PDF from this link: http://goo.gl/bcvRNH Download event poster from this link: http://goo.gl/Q0KWCM Brief: Cairo is filled with barriers controlling people movements, suppressing them as well as detaining green and public spaces to the extent that most people have been taking these spaces for granted. Public spaces have been for a while the periphery of our daily life. We will explore in this workshop how we can manipulate and alter people’s perception and direct their attention to how these spaces are integral for city life. This exploration will be backed up by intensive technical tutorials introducing computational design and fabrication techniques and tools mainly Rhino, Grasshopper, Geco and Ecotect. Not only will this be the typical technical workshop, but rather you will also have the chance to be guided step by step on how these tools are used through out different design stages in a real world scenario. Design prototypes will be produced through 3D printing, the main workshop output will be a fabricated one to one functional model for one of the designs using our new in-house CNC machine. Tutors (check the PDF for bio): Olga Kovrikova, MArch DIA Alexandr Kalachev, MArch DIA Karim Soliman, MArch DIA Islam Ibrahim, MArch DIA Sherif Tarabishy, B.Sc. AAST Application: Application deadline 1 September 2013 ** For students (undergrad / Master), teachers and PhD proof of status is required (university ID with a date or a certificate of enrollment) to apply for the students package. Packages (choose one of the following in the application form): 1. Standard registration Course fee is 4250 EGP For Students 3500 EGP 2. Early bird registration discounted fee For Professionals 3750 EGP For Students 3000 EGP ** Early bird offer ends on 14 August 2013 3. Group registrations discounted fee (5 or more) For Students 20% off - You will have to fill out an application form here: http://goo.gl/0QxAga - You will need to submit your CV and Short Portfolio (max. 10 MB) to info@morph-d.com, email subject: “Morphing Norms Application” (we will decide if you are eligible for an early bird discount or not based on the date of your email submission) - We will confirm receiving emails from all applicants. Successful applicants will be contacted 5 days after each deadline (early bird/final) and will have to confirm participation within 3 days, if they fail to do so, places will be given to others on the waiting list. - A maximum of 30 applicants will be selected.
…
ipe Pecegueiro Type of participants Students, graduate students, researchers, professionals Duration 2 days, Sat – Sun Prerequisites 1 / participants skills Experience in Rhino and Grasshopper; programming experience with Processing or Arduino IDE is recommended but not necessary Prerequisites 2 / hardware Participants should bring their own computer with Windows XP or 7 64 bit OS Prerequisites 3 / software Rhinoceros Version 4 sr9, Grasshopper 0.8.0050, Arduino IDE, Processing, Google Earth* *Software versions should be the most updated versions at the time of the workshop. Rhino 5 is also acceptable. Description An associative model is only as relevant as the information it seeks to manage. This workshop will engage the associative model by feeding it with real time and real world data captured through prefabricated sensor nodes known as the Ambient Sensor Kit (ASKit). The ASKit is an Open Hardware platform for personal data collection and sharing. The ASKit project is based on the premise that a personal understanding of the information around us is key to a sustainable and informed habitation of our environment. http://uask.it. Workshop participants will be working with Grasshopper, a generative,logic based design environment where participants will be able associate real world data to their models. Several other tools will be employed including Processing, Pachube, Google Earth, and gHowl (a set of custom components which extend the functionality of Grasshopper). This two day workshop will focus on a specific area in Berlin to understand, through data, the differences between the physical barriers and invisible forces which define certain urban functions. The participants will engage in: - environmental data collection - site surveying with open hardware/DIY electronics - data visualization and analysis - associative modeling with collected data Day 1: Demonstration of ASKit hardware platform for data collection and associative modeling. Data capture session in specific zones in Berlin. Data visualization and associative modeling in Grasshopper. Day 2: Focused Data Capture Session Directed projects applying associative modeling with collected data.…
Added by Luis Fraguada at 11:34am on August 23, 2011
tura digital en corte Láser, corte CNC, impresión 3d, y modelado paramétrico.
Este tercer taller enseña los fundamentos del modelado paramétrico y algunas bases de manufactura digital.
PERFIL DEL ALUMNO QUE INGRESA:
Diseñador, Arquitecto, Artista con conocimientos de Rhinoceros interesados en comenza a modelar paramétrico con Grasshopper para fabricación digital básica.
PERFIL DEL ALUMNO QUE EGRESA:
El alumno terminará con los conocimientos y criterios para el desarrollo de piezas o proyectos utilizando fabricación digital, mejorando y agilizando los flujos de trabajo, así como los criterios fundamentales del Modelado Paramétrico -Generativo.
Taller de modelado paramétrico con Grasshopper
Interfase
Manejo de Datos
Data Volátil
Data Persistente
Rangos y dominios
Atractores
Listas y Cull
Modelado por Layer Object
Análisis Básicos
Conexión de Curvas
Superficies
Análisis de Superficies
Panelización Básica
Relaciones con Excel
Modelado generativo
Fechas: del 8 de Febrero al 1º de Marzo
Días: Sábado
Horarios: de 10 am a 3 pm
Sesiones: 4 de 5hrs
Duración: 20 horas
Precio: $3,000.00…
er" logic but it miss when comes the copy or offset.
Here is my following logic
Take the square of 25 m x 12 m ; make it a surface
I divide it in "blades" of 20 cm
I take the edges of the "blades",
I divide this edges in 40 points (or equivalent) (A)
I identify my curves (curves) which are on the floors, which are curves (B)
First i do this "test" :
for each crossroad between A and B, i make a circle of X cm (slider) of diameter and the rule is the following :
* In this circle, the future movement of my A curve must be at Z = 0
Second step :
for each next point, i have to : leave a copy on Z = 0 and rise the second one for a heigh of Y cm (slider) from the ground.
the next (W = slider to chose every each number of point, i decide to do the following point) point, which is a little bit farer from the previous point, must duplicate the same height of Y ; and also be copied to Y + Y cm.
There is a Z number (slider) which is the max height possible for these points, which mean that the next point must be at this very same level except ... The third step scenario.
The purpose is to be able to have flat area, like step in a stairway.
Third step :
The grasshopper must test if the A points are between two or more "area at Z = 0". Why ?
The goal is to obtain something like screen "side view" if there are two starting points at Z = 0.
Which also mean that if there is an odd number of points, the remaining odd number must be at the top of the "stairs"
At this point of the grasshopper, we might be able to obtain, thanks to the sliders the "staircase form" regarding :
- The size of the test circle between A and B curves
- The "footstep" of each points (height)
- The number of points before a "copy of the point + the next footstep rise"
- The max heigh possible for all the point off B curves
And at this moment i have a new problem in my logic. You will get my idea, but it might be wrong as well...
Therefore, and after that, we should be able to link every point by a straight line.
To fillet with P (angle) a line with the following one
To join all the line of a same B curve
To cut it at the center of each circle at Z = 0 (the crossroad of A and B)
To offset it with Q (distance)
To rise a line from the center of each circle at Z = 0
To cut the extra part of each Offset"ed" curve to get an offset curve "aligned in Z" with the original one.
To create loft the original and offset"ed" one
To extrude the surface to a distance of R
And grasshopper "should be done" because, i will duplicate it for the ceiling, reverse the form with a -Z vector to the Y value and modifie my Z in Z' to modify my max height
Could you help me ?
…