ow the steps of the successful run when step 1.2 is bypassed (note that the and OpenFOAM session is open in the background while running the Butterfly demo file):
1. create wind tunnel, and use different parameters of (4,4) for _globalRefLevel_ as suggested by Theodoro in this post
2. run blockMesh:
3. run snappyHexMesh:
4. run checkMesh:
5. connect the case from checkMesh to simpleFOAM and run the simulation:
6. the simulation converged at 1865 iteration, but the results visualization part has some problem:
7. so I revised this part according to suggestions from Hagit:
8. and the results can be visualized for P and U values:
The GH file used for the successful run shown above is attached here.
Now, the following is the error I got when the case from the update fvScheme component is used for simpleFOAM simulation:
the warning message on the simpleFOAM component is:
1. Solution exception: --> OpenFOAM command Failed!#0 Foam::error::printStack(Foam::Ostream&) in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/lib/libOpenFOAM.so" #1 Foam::sigFpe::sigHandler(int) in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/lib/libOpenFOAM.so" #2 ? in "/lib64/libc.so.6" #3 double Foam::sumProd<double>(Foam::UList<double> const&, Foam::UList<double> const&) in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/lib/libOpenFOAM.so" #4 Foam::PCG::solve(Foam::Field<double>&, Foam::Field<double> const&, unsigned char) const in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/lib/libOpenFOAM.so" #5 Foam::GAMGSolver::solveCoarsestLevel(Foam::Field<double>&, Foam::Field<double> const&) const in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/lib/libOpenFOAM.so" #6 Foam::GAMGSolver::Vcycle(Foam::PtrList<Foam::lduMatrix::smoother> const&, Foam::Field<double>&, Foam::Field<double> const&, Foam::Field<double>&, Foam::Field<double>&, Foam::Field<double>&, Foam::Field<double>&, Foam::Field<double>&, Foam::PtrList<Foam::Field<double> >&, Foam::PtrList<Foam::Field<double> >&, unsigned char) const in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/lib/libOpenFOAM.so" #7 Foam::GAMGSolver::solve(Foam::Field<double>&, Foam::Field<double> const&, unsigned char) const in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/lib/libOpenFOAM.so" #8 Foam::fvMatrix<double>::solveSegregated(Foam::dictionary const&) in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/lib/libfiniteVolume.so" #9 Foam::fvMatrix<double>::solve(Foam::dictionary const&) in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/bin/simpleFoam" #10 Foam::fvMatrix<double>::solve() in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/bin/simpleFoam" #11 ? in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/bin/simpleFoam" #12 __libc_start_main in "/lib64/libc.so.6" #13 ? in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/bin/simpleFoam"
The error message from the readMe! output node is attached below as a text file.
Hope you can kindly advise what the important steps or parameters I might have missed here. I assume it might be related to OpenFOAM rather than with the Butterfly workflow...
Thank you very much!
- Ji
…
ly 26-27-28-29 (digital fabrication)
The third edition of digitalMed Workshop is structured as a design laboratory. Participants will learn the challenging process of producing ideas, projects and research analysis that are to be developed through specific software and concepts that emerge through the use of mapping, parametric design and digital fabrication.
The workshop will take place in the city of Salerno (Italy) and it will last 11 days structured into 3 intensive weekends: July 13-14-15 (mapping); July 19-20-21-22 (parametric design); July 26-27-28-29 (digital fabrication).
Goals and Objectives:
We aim to make clear the theoretical and technical knowledge in the approach to parametric and generative design and digital fabrication. (From collection and data management, to the manner in which these inform the geometries, to the fabrication of prototypes.)
Participants will also have the opportunity to practice the new knowledge gained in the design laboratory through project work.
Project Theme:
"Urban Field" Identify, study and analyze the system of public spaces in the urban area of the city of Salerno.
Connection, mutation, generation and evolution are the themes to be followed in project work.
Brief Description of Topics:
- Mapping. Our reality, in all its forms, has studied through concepts of the theory of Complex Systems. The techniques that will be used to study events and places of reality, will work for the management, manipulation and visualization of data and information. These will form the basis for project management and driven geometry, conducted during the second phase of the workshop.
- Parametric Design. Introduction to Rhino* and Grasshopper. Specifically, we will explain the concepts with which to work with the software of parametric design and how they function. Through these tools, we will arrive at the definition of systems of mathematical and / or geometrical relationships that are able to generate and govern patterns, shapes and objects that will inform the final design.
- Digital Fabrication. In this phase, participants of the workshop are organized into working groups. Participants have access to materials and conceptual apparatus that will take them directly to the fabrication of the geometries of the project, with the use of software CAD / CAM interface and the use of machines for the digital fabrication.
The DigitalMed workshop is organized by Nomad AREA (Academy of Research & Training in topics of Contemporary Architecture), in collaboration with the City of Salerno, the Order of Architects Province of Salerno and the National Institute of Architecture In / Arch - Campania.
Interested parties may download the Notice of Competition at the address www.digitalmedworkshop.com and fill the pre-registration no later than July 10th 2012.
PRESS OFFICE
Dr. Francesca Luciano
328 61 20 830
fra_luciano@libero.it
For information or subscriptions:
e-mail: info@digitalmedworkshop.com - tel: 089 463126 - 3391542980 …
of the new challenges presented to the society and architecture in Portugal. With technological developments, tools once limited to not creative areas begin to be part of the everyday life of students in University Architecture Laboratories and change its design processes. The architecture design methods are changing rapidly with the introduction of CAD-CAM software’s. In recent years, new software’s have been available for 3D representation and digital fabrication, which have allowed creating new ways of interacting with the computer and architecture. Contemporary architecture in its various scales, seeks greater flexibility, adaptability and interactivity taking into account both the means and goals of kinetic systems. Thus, it is essential to the creative industry players to acquire new knowledge about the latest technological innovations and how they can solve some of the problems and challenges of today’s society.
The workshop will explore the use of Grasshopper, Firefly and Arduino as creative and technical tools in all the design process, to simulation and prototype 3D interactive architecture solutions.
The theoretical and practical workshop (64 hours) taught in English and Portuguese, will be composed of two modules: (1) LS_01: Firefly +Grasshopper + Arduino and Scale Model Fabrication; (2) LS_02: Design Studio – Discursive Wall.
This workshop is intended for students and professionals from different areas of knowledge, (architecture, design, fine arts, engineering, music and programming) who are interested in the process of design: from ideation to prototyping. The participants will generate scale models.
Registration is limited to 20 participants with or without software knowledge. Participants will work individually and in group. Participants must take their own laptops to the workshop. Registrants should complete the form by 28 February 2012. Once registered, you will receive an email confirming your acceptance.
Questions or doubts contact us:
alivingsystem@gmail.com
…
Added by Brimet Silva at 7:07pm on January 16, 2012
r the course is conditional on being committed to change : ) We are looking for people who want personal challenges, not massive videos. We believe on individual training to give learning experience to our students that are based on their choices, interest, passions and ambitions, giving them more voice into the learning process.
As first step we create your course with your input and we start with your weekly challenges. Be part of the new wave of online courses : )
info@pazacademy.xyz
…
cs/numpy-for-iron-python-wit... ) also fails to allow numpy import:
Numpy and Scipy are in directories here:
C:\Program Files (x86)\IronPython 2.7\Lib\site-packages\
This is all a sad joke, taking a full day so far. Rhino just sort of sucks for serious work. There's no way I can offer any Numpy/Scipy scripts to clients this way, just impossible. Rhino/Grasshopper Python should come with this stuff, dear developers, or have a simple installer that just works. It comes with math already doesn't it? So why not Numpy and Scipy for serious users?
Upon restarting Rhino, it totally changes behavior and spits out a crazy error upon importing Numpy:
Message: The type initializer for 'NumpyDotNet.NpyCoreApi' threw an exception.Traceback: line 11, in <module>, "C:\Program Files (x86)\IronPython 2.7\Lib\site-packages\numpy\core\multiarray.py" line 6, in <module>, "C:\Program Files (x86)\IronPython 2.7\Lib\site-packages\numpy\core\__init__.py" line 155, in <module>, "C:\Program Files (x86)\IronPython 2.7\Lib\site-packages\numpy\__init__.py" line 1, in <module>, "C:\Users\Nik\AppData\Local\Temp\TempScript.py"
The Grasshopper Python node editor gives the same error. Perhaps I can only import parts of Numpy using "from Numpy import XXXX"?…
Added by Nik Willmore at 3:32pm on October 11, 2015
and visualizing data for ENVI-Met 4 software. ENVI-met is a cutting edge software used to analyse microclimate interactions in urban environment. Tens of different analysis types can be performed on the chosen building context. From Mean radiant temperature and local Wind speed to CO2 concentration and Pollutant dispersion in the air. To generate the building context for Ladybug ENVI-met components, Antonello used Gismo:
An example similar to results in upper screenshots has been been attached below. To run it, Gismo, Ladybug and Human plugins need to be installed. To perform the ENVI-met analysis, download ENVI-met 4 Basic for free, and install it. Steps in the .gh example file have been labelled from 1 to 11. They mostly consist of just setting a boolean toggle to True. An exception to this are steps 6 (set the folder path of your ENVI-met application install folder), and 8 (running the ENVI-met simulation). Step 8 has been explained in detail in the photo attached below (step8.jpg). Special thanks to Antonello for developing and guidance on ENVI-met application and components! Post questions below if you have any issues!…
Added by djordje to Gismo at 11:30am on March 25, 2017
tic systems and iterated function systems.
https://www.food4rhino.com/app/chimpanzee
https://matousstieber.wordpress.com/
#chimpanzee3d
I would appreciate any feedback, suggestions or reports of bugs. Please email me at matous.stieber@outlook.com.
To install:
Delete any previous versions of Chimpanzee you have installed
In Grasshopper, choose File > Special Folders > Components folder > Unblocked the files
Restart Rhino and Grasshopper
Chimpanzee changelog
Aug 31, 2019 - Chimpanzee 0.2.
Update to add 38 new components including hyperchaotic systems, maps and strange attractors. Additional features and options added including exponent input to Mandelbrot Set and Burning Ship.
Nov 11, 2018 - Chimpanzee 0.1
initial release
Further development may include Mandelbulb, Quaternion Julia Set, etc.
…
r [String Split] in version 0.9.0014)
The [Timer] prompts a component to up date at the set interval. in this case every 1 seconds.
The [Time] param is a placeholder for a time in the same way that a [Number] param can hold real numbers.
By using "Now" as the input to the [Time] param you will get the current time when the param updates. therefore every second it resets to the current time.
The [Text Split] is there to separate the output of [Time] in a string format at every colon ":"
Therefore "Monday, 13-MAY-2013 (11:23:30)" would become:
0 Monday, 13-MAY-2013 (1
1 23
2 30)
The next two components use this to convert it into the current seconds. Because we are after the last item "30)" we can use [List Item] on a reversed list to get the last item.
Now we have to remove the ")" with [Replace String] but we are replacing it with nothing so it disappears.
The Arrow is part of the Sketch Tool Functionality of the canvas.
Lastly the 3 different inputs should go into the three different Inputs of the [Stream Filter]
…
rested in specializing in the field of Computational design.
The workshop will help understand how Grasshopper facilitates during the design process allowing one to Generate, Automate and Manipulate data.
To Register:
http://goo.gl/forms/gvUTyZihVK
Workshop Structure:
Day 01: 16 August 2018
Introduction to Computational Processes in Architecture
Understanding Grasshopper and its relation to Rhino3D
Working with fields and Grids (Supplementary readings for Architectural theory)
Spatial Concepts using Data
Day 02: 17 August 2018
Understanding Data in Grasshopper - LISTS
Managing Data in Grasshopper (Supplementary reading)
Experimentation on Massing and Architectural Forms
Day 03: 18 August 2018
Understanding Data in Grasshopper – Trees
Surface Logics (Supplementary reading)
Design Exercise and Prototyping
Day 04: 20 August 2018
Architectural Skins
Day 05: 21 August 2018
MasterClass Project
Introduction to various types of Digital Fabrications
Prototyping of works during the Workshops
Basic knowledge of Rhino 5 is required to be able to take this training.
CERTIFICATION: All participants will receive a Workshop certificate from Authorized Rhino Trainer.
3D Printing: Prototyping of works during the Workshops
Workshop Tutor:
Kavitha M, an Architect and Computational Designer, 3D Printing Specialist is also the co-founder of INTO Design Research, will head the Computational Process in Architecture using Grasshopper workshop. Graduated from Stadelschule Architecture class with Masters in Advanced Architecture Design, has been researching on teaching methodologies on digital tools and their influence on Design thinking.…
dellatore nurbs, Rhinoceros. Attraverso una serie di esercizi che si svolgeranno durante il corso, si spiegheranno i temi fondamentali che stanno alla base della modellazione generativa e del design parametrico.
Il corso è rivolto a chi ha già una familiarità minima con la modellazione attraverso Rhinoceros e vuole ampliare le proprie competenze verso il campo della modellazione parametrica e generativa, e si terrà da martedì 22.10.2016 a giovedì 24.10.2016 – dalle 10:00 alle 17:00.
Potete scaricare qui il PROGRAMMA DEL CORSO.
Il calendario dei corsi è consultabile qui.
VEGA Parco Scientifico TecnologicoVia della Libertà 12 – VeneziaEdificio Porta dell’Innovazione – Piano Terra
Per iscriversi al corso è necessario essere registrati al sito.Per tesserarvi al Fablab Venezia, diventare maker, usufruire dei vantaggi, clicca qui.
Le iscrizioni chiuderanno giovedì 17.11.2016.
Il corso ha un costo di 270,00 euro + iva (329.40) per i tesserati e convenzionati,per i non tesserati il costo sarà di 330,00 + iva (402.60) euro.
Vuoi risparmiare? Iscriviti entro tre settimane dalla data di inizio corso, usufruirai automaticamente dell’offerta “early bird” ovvero uno sconto del 20% sul costo a te dedicato.
Per iscriversi:
http://www.fablabvenezia.org/parametric-design-with-grasshopper/…