he Cordyceps. Maybe some of you find this helpful/useful.
So basically, the Cordyceps is a physical module with 4 knobs and 1 slider. The knobs give an output between 1 and 1000, while the physical slider outputs 0-359. And of course, for this physical module I wrote a plugin to communicate with it. The knobs are intended to be the variables that modifies the design, while the physical slider is intended to be connected to the camera component.
Here I will put up "the recipe" for all to make their own module. You will be able to download the plugin as well.
Please send me a message if you want the 3D-files for the knobs, the box and slider knob. They've been made to directly 3D-print.
Plugin:
https://github.com/zakadjeb/Cordyceps/blob/master/Cordyceps/Cordyce...
Code for Arduino IDE:
https://github.com/zakadjeb/Cordyceps/blob/master/Arduino/_Arduino_...
What you need:
1x - Arduino (Leonardo, UNO or whatever)
4x - Potentiometers
1x - Sliding potentiometer
1x - Breadboard
Bundle of jump wires.
1. So, a potentiometer is a variable resistor, which is basically a component that changes the resistance between the voltage and the ground.
If A is supplied with 5V then B must be connected to Ground. The W will give "read" the resistance, and thus should be placed in Analog input (A0-A5) on the Arduino. The slider potentiometer works the same way.
2. Now connect the 4 pots to each their Analog input. The slider is supposed to be in A4. So to make sure:
A0: Knob1
A1: Knob2
A2: Knob3
A3: Knob4
A4: Slider
3. Now it's time to connect the voltage! Using the breadboard, the voltage can be sent through 1 line, the Ground as well. It should be quite easy to connect them.
4. Now, download the Arduino IDE and copy-paste the code I supplied above. In the IDE, you need to let it know which Arduino you're working with, and which port is should send the script.
5. Almost there. Download the plugin. Open the port you're using through the plugin. Set Start to True and the Cordyceps should be within you.
This recipe will be updated!
Let me know if there are any issues.
// Zakaria Djebbara…
he Cordyceps. Maybe some of you find this helpful/useful.
So basically, the Cordyceps is a physical module with 4 knobs and 1 slider. The knobs give an output between 1 and 1000, while the physical slider outputs 0-359. And of course, for this physical module I wrote a plugin to communicate with it. The knobs are intended to be the variables that modifies the design, while the physical slider is intended to be connected to the camera component.
Here I will put up "the recipe" for all to make their own module. You will be able to download the plugin as well.
Please send me a message if you want the 3D-files for the knobs, the box and slider knob. They've been made to directly 3D-print.
Plugin:
https://github.com/zakadjeb/Cordyceps/blob/master/Cordyceps/Cordyce...
Code for Arduino IDE:
https://github.com/zakadjeb/Cordyceps/blob/master/Arduino/_Arduino_...
What you need:
1x - Arduino (Leonardo, UNO or whatever)
4x - Potentiometers
1x - Sliding potentiometer
1x - Breadboard
Bundle of jump wires.
1. So, a potentiometer is a variable resistor, which is basically a component that changes the resistance between the voltage and the ground.
If A is supplied with 5V then B must be connected to Ground. The W will give "read" the resistance, and thus should be placed in Analog input (A0-A5) on the Arduino. The slider potentiometer works the same way.
2. Now connect the 4 pots to each their Analog input. The slider is supposed to be in A4. So to make sure:
A0: Knob1
A1: Knob2
A2: Knob3
A3: Knob4
A4: Slider
3. Now it's time to connect the voltage! Using the breadboard, the voltage can be sent through 1 line, the Ground as well. It should be quite easy to connect them.
4. Now, download the Arduino IDE and copy-paste the code I supplied above. In the IDE, you need to let it know which Arduino you're working with, and which port is should send the script.
5. Almost there. Download the plugin. Open the port you're using through the plugin. Set Start to True and the Cordyceps should be within you.
This recipe will be updated!
Let me know if there are any issues.
// Zakaria Djebbara…
de geometries, which can easily be adapted to changing design intentions and requirements. The core concept of the software is that the brick unit is the basis for every action performed. Basically, a design is generated through drawing, placing and manipulating individual bricks. BrickDesignoffers different methods to manipulate the individual bricks in order to map patterns on a façade. These methods can be extended ad libitum through an open script interface, which gives access to a number of brick parameters.…
Added by Ayuka Oomura at 3:40am on November 4, 2013
atch Online HD 21st Dec 2017. Yeh Hai Mohabbatein 21st December 2017 Watch Online HD 21st Dec 2017. Yeh Hai Mohabbatein 21st December 2017 - Batameezdil Full EpisodeYeh Hai Mohabbatein 21st December 2017 Watch Online, Today Replay Yeh Hai Mohabbatein 21st December 2017 On Star Plus. Indian Drama Series Yeh Hai Mohabbatein 21 Dec 2017 In Hd Quality Full Part. Yeh Hai Mohabbatein 21st December 2017 Today Replay Recap Youtube Video. Yeh Hai Mohabbatein 21st ...Yeh Hai Mohabbatein 21st December 2017 Full Episode 1355 - VideoVideo watch online Yeh Hai Mohabbatein 21st December 2017 full Episode 1355 of Star Plus drama serial Yeh Hai Mohabbatein complete show episodes.Yeh Hai Mohabbatein 21st December 2017 DEC 21 2017 LIVE WATCH NOW ...- Yeh Hai Mohabbatein 21st December 2017 Full Episode Watch Online Dec 21 …Yeh Hai Mohabbatein 21st December 2017 Full Episode Colors Tv HD. Hotstar Yeh Hai Mohabbatein Episode full by Colors Tv.Watch Yeh Hai Mohabbatein 21st December 2017 Video Online.Yeh Hai Mohabbatein 21st ...Watch Ye Hai Mohabbatein Full Episodes Online, Streaming ... - HotstarWatch Ye Hai Mohabbatein latest & full episodes online on hotstar. Upgrade to premium membership to enjoy all the latest award winning Undefined TV shows instantly & ad-free in HD on hotstar!…
work with color to fit it into this logic (porous structure)?the range of colors: from white to yellow, orange, red. to blackis not so nice, saying, does not match to the design of the house.So there for it should only show the material what carries this pattern.So my question in yours case:i think that the picture of you must be thought as invert, so that it's become functional as well. if you thought this as invert,than you musst icrease the surface division,so that the rays of the sun can be disturbed to penetrate the house.that is a good the example:http://www.detail.de/inspiration/fuenf-hoefe-in-muenchen-100701.htmlin your case, the function of the patterns would get parametric significance. where more sunlight, consequently a denser pattern, and of course vice versa.therefore, the attractor should be the solar/sun system.http://digitalsubstance.wordpress.com/2011/12/07/facade-porosity-ad...What do you mean, i still see a version of you?http://www.youtube.com/watch?v=JoqDYcCDOTgThanks…
roduced the same error.
I tried to run them again with the file already open and I got this (I imagine predictable) error:
Sorry! But the number of available CPUs on your machine is 4.
Honeybee set the number of CPUs to 4.
Grid-based Radiance simulation
The component is checking ad, as, ar and aa values. This is just to make sure that the results are accurate enough.
Good to go!
Current working directory is set to: C:\ladybug\Parametric_Shading_Wall\psw_z0.25_t.025_y.2_r90_m3_lux\gridBasedSimulation\
Failed to remove the old directory.
WindowsError(32, 'The process cannot access the file because it is being used by another process')
Failed to read the results!
rtrace: fatal - (psw_z0.25_t.025_y.2_r90_m3_lux_RAD.oct): truncated octree
rtrace: fatal - (psw_z0.25_t.025_y.2_r90_m3_lux_RAD.oct): truncated octree
rtrace: fatal - (psw_z0.25_t.025_y.2_r90_m3_lux_RAD.oct): truncated octree
rtrace: fatal - (psw_z0.25_t.025_y.2_r90_m3_lux_RAD.oct): truncated octree
Runtime error (PythonException): Failed to read the results!
rtrace: fatal - (psw_z0.25_t.025_y.2_r90_m3_lux_RAD.oct): truncated octree
rtrace: fatal - (psw_z0.25_t.025_y.2_r90_m3_lux_RAD.oct): truncated octree
rtrace: fatal - (psw_z0.25_t.025_y.2_r90_m3_lux_RAD.oct): truncated octree
rtrace: fatal - (psw_z0.25_t.025_y.2_r90_m3_lux_RAD.oct): truncated octree
Traceback:
line 336, in script
@Mostapha, if it is indeed a different issue, what do you think it could be?
Thanks again,
-Nicholas…
perienced with grasshopper, but so far I've managed to combine the following:
Giulio Piacentino's "Catenary arch from height" script
Pirouz Nourian's "Mobius" script (Obtained from a friend)
End Result:
Here's where I'm stuck: I want the mobius twist to revolve around the midpoint of the arch, but the script uses the input values to determine the endpoints, resulting in a weird sinuous shape when viewed from above. Also, the secondary end points (generated by the mobius script, determining the width of the surface) are generated by default along the z axis, resulting in an arch that only touches the "ground" at two points. I attempted to work around this issue by trying to force the zHeight parameter to correspond with the y axis (thus rotating the arch 90 degrees so it would lay "flat"), but the script interprets the third point as a value and not as an actual point to bisect. I thought this might be an issue with the C# component that I obtained from Giulio Piacentino's script, so I attempted to tinker around with the source code. Unfortunately, I'm not fluent in C# so I only managed to mess everything up (I've since recovered the code from the cache). Anybody got some ideas? -BC …
you working on a PV system which will power a domestic hot water boiler?
To answer your questions:1) Each grasshopper component (ghpython being one of those too) is using grasshopper's data matching algorithm. This algorithm takes care of complex issues which may arise from combining lists with single items, data trees with different number of items per branch and so on.I think there is a way of introducing a call to other processor's threads per each inputted surface, but this will be a very difficult job, as it will require writing a custom data matching algorithm. I do not think I am up to that task.Instead I tried to introduce the multithread only to the final part of the PVsurface component and one of its time consuming parts: calculation of sun angles, solar radiation and ac/dc power output.I attached the test file below, but sadly it didn't go well: the multithreaded version mostly runs at the same time as the regular version.I do not think I am qualified enough to answer why is that so, but I think that it may have something to do with the type of the function that the multithreading is applied to: the code is suppose to run few separate functions a couple of thousand times, and work with a couple of lists. From my experience, the multithreading works the best when a single list or two are supplied to a single function. I may be wrong on this.I am very sorry to say that I can not implement this feature.2) I am not familiar if open source PV modules database has been released.But one can always download the data for specific modules from producers websites. It can then easily be transferred to a .csv file or other text file.Ladybug Photovoltaics are based on NREL's PVWatts model.In comparison with other commercial software applications, PVWatts offers a more generalized system model, with some of the values and characteristics being assumed or embedded.The Fuentes empirical thermal model we are currently using follows the same logic: it generalizes the Module characteristics. The following characteristics are only editable: module efficiency, temperature coefficient and module mount type.It may be possible to replace Fuentes with some other, less generalized 5 parameter thermal model. But as an architect, I would definitively need help on this.
Sorry if my reply did not fulfill your expectations, and thank you for the kind words!…
:
______________________________________________________________________
As most of you know by now, Grasshopper will be included in Rhino 6 for Windows. We are almost finished with the Grasshopper in Rhino 6 development and you are invited to try it.
There are many enhancements, including:
High DPI displays are now supported.
Compatible with existing Grasshopper plug-ins.
New components including Make2D, Bend, Flow, Maelstrom, Splop, Splorph, Stretch, Taper, and Twist...
GhPython is now included. It features its own GHA compiler and a major node-in-code speed up.
Stable development target: Your plug-ins continue to work each minor Grasshopper upgrade.
RhinoCommon enhanced: More Rhino core functionality is accessible from within Grasshopper.
Developer documentation is online with guides and API references.
Now:
Download the current Rhino WIP for Windows
Try all your existing Grasshopper definitions
Report any problems you find here...
We want to make sure this new Grasshopper works for you. If you have any issues, David needs to hear from you very soon.
Thank you,
- Bob
Visit Grasshopper at: http://www.grasshopper3d.com/?xg_source=msg_mes_network
______________________________________________________________________
So...
Any news about OS X version? Many of us won't use Parallels or whatever win emulator or have a win machine nearby.
Hope you are working at it.
Cheers
gbrl
…
Added by Gabriel Netto at 3:44pm on October 29, 2016