humacher (Zaha Hadid) and in fact most issues of AD (Architecture Design)
The Politics of Parametricism: Digital Technologies in Architecture by Matthew Poole, which is kind of a follow up
In my opinion learning Grasshopper will be enough and there is no need to learn Python to use it successfully. Best to have a deep understanding of Grasshopper and what it can do then to try and learn too many things at once. It will help you in applying the principles to other code and not the other way round (ie. learning the concepts first and then going into grasshopper). The best way to learn the concepts is by applying and trying them in a tool like Grasshopper.
I absolutely recommend that you visit a Grasshopper workshop, as that will teach you a lot more than Youtube videos. If you cant visit a workshop, then I recommend the rese.arch video series on Grasshopper. They're really indepth and go from simple introduction to very advanced. You should ideally buy and complete all of them.
Also there is of course Dynamo and its integration with Revit and BIM, which is something to look at, although Grasshopper covers all of that as well, at least with the integration with ArchiCad. Autodesk products are more common around the world though.
Be aware that a lot of the power of Grasshopper is also in the plugins you can get for it, like Kangaroo (physics simulation), Ladybug&Honeybee (environmental analysis), Karamba (finite element analysis), Hoopsnake or Anemone (looping) and many, many more. You can find them at food4rhino.com.
Good luck!…
unity in Ukraine, which is orientated to contemporary architecture.
The results of CANactions will be published in ACC magazine (link), on the web-sites of “Architectural club” (link), AB "ZOTOV&CO" (www.zotov.com.ua),
Theme
Theme of CANactions 2009 is emergent design techniques.
This theme could include following architectural branches as Digital design, sustainable architecture and other sectors, which by the participants’ opinions, could be EMERGENT.???
Any architectural projects made earlier of specially for the CANactions’09 are allowed for submission.
Presentation
All the projects will be submitted in two phases:
Phase 1 – selection of 10-15 participants of CANactions.
Project has to be sent by e-mail to: (__) in PDF (not less then 300 dpi, not more then 10 Mb).
Phase 2 –the CANactions participants prepare 15-20 min presentation of their projects (screen projector, microphone) and materials for the exhibition in House of Architect, Kyiv. The project has to be presented by author. -> exhibition is the first architecture biennale
Presentation requirements: file should be composed in PDF format on A0 sheets, placed horizontal (not more then 1 sheets). This file should contain sufficient amount of the presentation graphic material, including text explanation up to 300 words.
The raster images should have printing definition not less then 300 dpi. It’s recommended to avoid solid black fillings, because the projects will be printed on ink-jet printer.
The presentation requirements could be changed after phase 1 results.
The presentation materials should be made in Ukrainian (or Russian) and English. Verbal part can be presented in any language.
Tarek Naga, Naga Studio, Los Angeles / USA (I can contact him - he will do it for free)
Awards
DIA (Dessau Institute of Architecture), Germany gives a prize: certificate for the education for 1 (2) semesters of Master-program in DIA for students and young architects (up to 30 years) from Ukraine. The decision about the prize winners will be made by selection board.
Guests presentations
- Daniel da Rocha DIA /Germany/ (flights, accommodation?). Theme: (scripting???)
- Aleksandr Kalachev DIA /Riussian Federation/, Tudor Cosmatu DIA /Romania/, Irina Bogdan DIA /Romania/ - "Parametrically Defined Urban Patterns".
- Grygorii Zotov DIA /Ukraine/ - “The Multicultural Columbarium”.
- Armen Menendian /USA/ - "Blending Parametric Methods With Traditional Design:
"The Danish Pavilion at Shanghai EXPO 2010".
Exhibitions
1. Projects of 10 (15) CANactions participants
2. other projects: Zotov+Co
Bollinger+Grohmann - structural eng.
the very many
C-Space Pavillon / alvin huang
ala _ amanda levete studio
anOtherArchitect
student work, Charles Walker, AA Unit Pavillon
Event schedule
Phase 1: 01.07.2009 – start of the CANactions 2009 and beginning of projects submission.
16.08.2009 - dead-line of the project submission of phase 1.
Phase 2: 17.08.2009 – announcement of the CANactions 2009 participants.
30.08.2009 – dead-line of submission of the CANactions 2009 exhibition materials.
14-26.09.2009 – exhibition of the CANactions 2009 projects in House of Architect, Kyiv.
25-26.09.2009 – CANactions 2009.
26.09.2009 - finnissage / announcement of competition winners for DIA study
Contacts: canactions2009@gmail.com…
Added by Grisha Zotov at 6:32am on August 10, 2009
y case. Here's the thing. There is this subject at my university where we are assigned a famous building and we need to recreate it in Rhino. We're given bonus points if we manage to code some interesting part of it in Grasshopper. So far so good, I'm doing pretty well with Rhino and by far I am happy with the results I've achieved with modelling the given building. Harbin Opera House by MAD is the building I'm trying to model. There is one particular surface:I've built this surface in Rhino and now I'm trying to map pyramids on it. Not only have the pyramids to be different in height, but their height has to be dependent on the curvature of the surface. I'm getting some results but it seems to be exactly the opposite of what I need. I want to have higher/spikier pyramids where my curvature analysis shows red/blue and lower/slopier pyramids where the analysis shows green colour.At the moment I'm not really sure how the code I have works, but it seems that the height of the pyramids is dependent on a distance from a point in space to the projection of the cap-point of a pyramid.Here're my Rhino and Grasshopper files:surface1.3dm
surface1.ghI'd be grateful if someone of you guys could handle my problem. I've got one more issue with this surface, but once I get a solution to the first 1 will let know what the second one is.Thanks in advance and keep well!…
lts.
In the visualization, points is an interesting option. It's a matter of aesthetics I guess, I go with surfaces :) Also what you can try is selecting Filters -> Slice (you can also find it in the icons above the pipeline viewer), in the Slice options below the pipeline press Z normal and on the Z coordinate press some height relevant to the buildings (e.g. 1.75m a typical human scale). That would show you the flow around the buildings on that height. Experiment with selecting other normals and values. Keep playing with the filters there's some cool things in there. Also you can check out the mailing list and extensive paraview documentation.
Concerning the errors I apologize because I just downloaded your case.
It appears that the decomposeParDict is not included in the system folder. I am not sure if this is due to BF not going through the whole workflow yet or an ommission on our side. Please feel free to add it in Github. I will also note it down and pass it to Mostaph to check. In the meantime please find attached a VERY detailed decomposeParDict file. I took the liberty to set it at 4 processors (the numberOfSubDomains value) and also selected (that is uncommented) the scotch decomposition method. It's the easiest method to use since it is automatic and doesn't require any more inputs on how the domain is decomposed on the x,y,z directions (which would require you to change values in the attached file).
Now, the different folders created are simply snapshots of the current solution at the specific timestep. To control how often the solver is saving change the writeInterval number in the controlDict file. You can also change almost all these values on the fly, while OF is running.
Finally, concerning the other errors of parafoam it seems somehow parafoam is reading the intial condition names instead of actual results from the solution files and it doesn't like it.
Does this happen only when you open the case (i.e. at 0 time) or does it also happen when you move to an other timestep?
Also, are you using paraFoam, paraview or the paraFoam -builtin method?
The extension of the paraFoam file seems to be .foam which means you are probably using the built in viewer. That might be the issue but I'm not sure.
Can you try running paraview, navigate to your case folder, open the .foam file and see if there is still an error?
Also, if it isn't much trouble can you zip one of the time folders and attach it here? I'd like to take a look at what's inside to check against what the error report says.
Once again thanks for testing!
Kind regards,
Theodore.…
mmon.sdk ,but i herad its used in rhino5.
or example: the book grasshopper primer second edition ,page 98
i dont know what is the "doc.absolutetolerance" and where i can find about it....i dont kow it should be a class or a fuction,i tried to search the rhino4. net sdk,i cant find it ....maybe its my searching problem.
but according to the grasshopper primer, i indeed know many kind of Variables,many functions,basic structure, loops, and conditions,and what is onutil.xxxx and rhutil.xxxx.but i found all this imformation is not helpful enough to me when reading the examples downloaded from many disscussions.when i found a new variable or new funcion,i dont know where i can find the introduction about them,such as the upper coding:"doc.absolutetolerance".i tried to use the auto complete such as
dim xxxx as oncurve
xxxx. to find the class oncurve's funtions and variables ,but its too uneffcient.
-----------------------------------------------
And,i dont know the difference between the components vb script and dotnet vb script....
because i found when i type onutil. the auto complete has noting appear...and the variables declaring is not the same. in vb script dim xxxx as curve but in dotnet vb script its dim xxxx as oncurve,which is the same as the grasshopper primer teached me...but i guess.... the vb script component is just like the rhinoscript(not the same),and the dotnet vb script is more powerful than it. am i right?
------------------------------------------------
at last i dont know these.
Imports System Imports System.IO Imports System.Xml Imports System.Data Imports System.Drawing Imports System.Reflection Imports System.Collections Imports System.Windows.Forms Imports Microsoft.VisualBasic Imports System.Collections.Generic Imports System.Runtime.InteropServices
when i search google about them,the introduction about them is too professinal for me to understand......i just want to know what i can do by using them ...
-------------------------
sorry for disturbing you so much!!!
best regards!
yours truly
YUAN.T
…
sinergetici associati alla compresenza simultanea di differenti strumenti di analisi e digital design all'interno di un processo di progettazione in svolgimento. I partecipanti utilizzeranno Grasshopper (modellatore parametrico per Rhino): l'uso di questo editor grafico di algoritmi si integra alla perfezione con gli strumenti di modellazione di Rhinoceros 3D espandendo le possibilità di corstruire modelli parametrici altamente complessi. Per generare una complessità simile saranno utilizzati collegamenti live ai diversi programmi elencati di seguito: . Autodesk Ecotect Analysis via GECO . FEA software GSA via SSI Durante questi intensi 3 giorni, i partecipanti impareranno il workflow dei plug-ins con l'aiuto di esempi esplorando una panoramica dei differenti software, le possibilità di testare le performances di un progetto o l'uso di strumenti addizionali non legati ad un singolo sistema (es. accentuazione, formazione, reazione parametrica) [english text] The focus of the workshop is to integrate and correlate the synergistic effect associated with simultaneous presence of different digital design- and analysis tools in an ongoing design process. The main attention is set on easy to handle interface , which should be used at a early stage of conceptual design to respond to external and internal influences in a intelligent and sustainable way. Participants will use the software Grasshopper as a parametric modeling plug-in for Rhino. The usage of this graphical algorithm editor tightly integrated with Rhino's 3-D modeling tools open up the possibility to construct highly parametrical complex models. To generate this complexity we will use live linkages to several programs listed below: . Autodesk Ecotect Analysis via GECO . FEA software GSA via SSI In this 3 intense days, the participants should learn the workflow of the plug-ins with the help of examples and get an overview of the different software's, there possibilities for evaluating the performance of a design or the usage of additional tools to be not chained to a single system . (e.g. parametrical accentuation, parametrical formation, parametrical reaction) [.] Dettagli : Istruttori: Thomas Grabner & Ursula Frick from [uto]. lingua del corso: inglese (saranno disponibili tutor di supporto ma è richiesta una conoscenza di base della lingua unglese).
Quote d'iscrizione (min 12 max 20 posti): educational* : € 280.00 + iva professional: € 450.00 + iva * studenti, docenti, ricercatori, dottorandi e laureati fino a un anno dalla data di laurea OFFERTA EARLY BIRD SPECIAL: le prime 5 domande di iscrizione pervenute entro il 31 Dicembre 2011 avranno diritto ad una quota di iscrizione scontata del 20% Quote d'iscrizione E.B. SPECIAL: E.B. SPECIAL educational* : € 224.00+ iva E.B. SPECIAL professional: € 360.00+ iva. ulteriori info, dettagli e iscrizioni: http://www.co-de-it.com/wordpress/nexus-advanced-grasshopper-workshop-with-uto.html…
radiance parameters to get rid of blotching. To add another level of complexity to my problem, I am running simulations with a translucent material with the following properties: void trans testTrans
0
0
7 0.478 0.478 0.478 0.000 0.010 0.178 0.635
I have had no issues with the renderings when I use clear glazing, as seen on this image:
However the blotching-issue becomes very noticeable when I introduce translucent glazing into the scene:
For the two above cases I used the following parameters:
_av_ is set to 0
xScale is set to 2
_ab_ is set to 6
_dc_ is set to 0.5
_aa_ is set to 0.2
_ad_ is set to 2048
_st_ is set to 0.5
yScale is set to 2
_ps_ is set to 4
_ar_ is set to 64
_as_ is set to 2048
_ds_ is set to 0.25
_pt_ is set to 0.1
_dr_ is set to 1
_pj_ is set to 0.9
_dp_ is set to 256
_dt_ is set to 0.25
_lr_ is set to 6
_dj_ is set to 0.5
_lw_ is set to 0.01
I ran another test with increased Radiance parameters and got the following output:
with the following parameters:
_av_ is set to 0
xScale is set to 6
_ab_ is set to 6
_dc_ is set to 0.75
_aa_ is set to 0.1
_ad_ is set to 4096
_st_ is set to 0.15
yScale is set to 6
_ps_ is set to 2
_ar_ is set to 128
_as_ is set to 4096
_ds_ is set to 0.05
_pt_ is set to 0.05
_dr_ is set to 3
_pj_ is set to 0.9
_dp_ is set to 512
_dt_ is set to 0.15
_lr_ is set to 8
_dj_ is set to 0.7
_lw_ is set to 0.005
Although the second blotching case is much better than the first, it is still very bad for hours when the sun is lower in the sky. The above images are rendered for a clear sky at 18:00 in Germany in a West-facing room.
Sorry for the long post! Can someone help? Kind regards, Örn
…