Radial waffle system

Hi guys i need a serious help, anyone please help.

I want to do a radial waffle system

please find attach my files

thanks in advance

Attachments:

radial waffle system.3dm, 139 KB
radial waffle system.gh, 7 KB

Replies to This Discussion

Permalink Reply by MarcGrasshopper on March 25, 2017 at 6:44am

Can you provide a little bit more, I opened the file but there is no point referenced.

Please make a small sketch on how you want the waffle.

Permalink Reply by Andreas Shelis on March 25, 2017 at 7:00am

thanks for your help

Permalink Reply by Hyungsoo Kim on March 25, 2017 at 9:39am

Hi.

Have a look at the attached. Best.

Attachments:

radialwafflesystem_re.gh, 49 KB

Permalink Reply by Andreas Shelis on March 25, 2017 at 9:50am

this is missing, what plug-in is this?

Permalink Reply by Hyungsoo Kim on March 25, 2017 at 9:52am

It's not a plugin. Its one of native GH(Sets-->Tree-->Clean Tree)

Permalink Reply by Andreas Shelis on March 25, 2017 at 10:00am

Thank you so much Kim you helped me one more time, thanks a lot, now about the nesting and fabrication for laser cut ?

Permalink Reply by Hyungsoo Kim on March 25, 2017 at 5:28pm

I'd like to leave that to your part. Best.

Permalink Reply by Andreas Shelis on March 25, 2017 at 5:49pm

yes i will, thanks a lot Kim for your help

Permalink Reply by Andreas Shelis on March 26, 2017 at 2:10pm

Hi Kim,

Am apologize for bothering you once more, please find attach the definition and the .rh file for my attempt. I f you can help me to sort this out i will be more than thankful

Attachments:

radial waffle system repaired.3dm, 442 KB
radialwafflesystem_reparaired.gh, 35 KB

Permalink Reply by Hyungsoo Kim on March 26, 2017 at 2:50pm

So, what are you supposed to do?

Permalink Reply by Andreas Shelis on March 26, 2017 at 2:52pm

At this stage to boolean the intersection in order to put them together (fabrication) after the laser cut, i figured out how to nest them on the page but i cant boolean them in between them for the fabrication model

Permalink Reply by Hyungsoo Kim on March 26, 2017 at 4:19pm

Now you have your rib profiles and planes.

Next step(unroll & labeling+laser cutting)is up to you. Best.

Attachments: