be done easier, but later on the geometry will change and therefore this seems the better option. But coming back to the problem
First, there were some problems concerning the zone, although it seems solved still the “runenergysimulation” gives the following warning:
1. The simulation has not run correctly because of this severe error:
** Severe ** UpdateZoneSizing: Cooling supply air temperature (calculated) within 2C of zone temperature
Do one of you know what went wrong? It probably will solve most of it.
Second, “set Zone Thresholds” gives the following warning:
1. Solution exception:global name 'maxHumidity_' is not defined
However, the component is missing the max humidity input on the list, has this to do something with the error?
All the components are up to date.
I hope it will be an easy fix.
Gr Lars
“set Zone Thresholds” runtime error
{0;0;0}0. Runtime error (UnboundNameException): global name 'maxHumidity_' is not defined1. Traceback: line 80, in checkTheInputs, "<string>" line 282, in script
"runenergysimulation” report
{0;0}0. Current document units is in Meters1. Conversion to Meters will be applied = 1.0002. TypeError('Waarde kan niet null zijn.\r\nParameternaam: source',)3. Failed to copy the object. Returning the original objects...This can cause strange behaviour!4. [1 of 8] Writing simulation parameters...5. [2 of 8] No context surfaces...6. [3 of 8] Writing geometry...7. [4 of 8] Writing Electric Load Center - Generator specifications ...8. [5 of 8] Writing materials and constructions...9. [6 of 8] Writing schedules...10. [7 of 8] Writing loads and ideal air system...11. [8 of 8] Writing outputs...12. ...... idf file is successfully written to : c:\ladybug\unnamed\EnergyPlus\unnamed.idf13. 14. Analysis is running!...15. c:\ladybug\unnamed\EnergyPlus\eplusout.csv16. ......
Done! Read below for errors and warnings:
17. 18. Program Version,EnergyPlus, Version 8.3.0-6d97d074ea, YMD=2016.03.02 20:55,IDD_Version 8.3.019. 20. ** Warning ** IP: Note -- Some missing fields have been filled with defaults. See the audit output file for details.21. 22. ************* Beginning Zone Sizing Calculations23. 24. ** Warning ** GetInternalHeatGains: People="CLASSROOMOFFICEPEOPLE", Activity Level Schedule Name values25. 26. ** ~~~ ** fall outside typical range [70,1000] W/person for Thermal Comfort Reporting.27. 28. ** ~~~ ** Odd comfort values may result; Schedule="SCHOCCUPANCYSCHEDULE".29. 30. ** ~~~ ** Entered min/max range=[0.0,1.0] W/person.31. 32. ** Warning ** Calculated design heating load for zone=CLASSROOM is zero.33. 34. ** ~~~ ** Check Sizing:Zone and ZoneControl:Thermostat inputs.35. 36. ** Severe ** UpdateZoneSizing: Cooling supply air temperature (calculated) within 2C of zone temperature37. 38. ** ~~~ ** ...check zone thermostat set point and design supply air temperatures39. 40. ** ~~~ ** ...zone name = CLASSROOM41. 42. ** ~~~ ** ...design sensible cooling load = 25499.10 W43. 44. ** ~~~ ** ...thermostat set point temp = 0.000 C45. 46. ** ~~~ ** ...zone temperature = 15.334 C47. 48. ** ~~~ ** ...supply air temperature = 15.000 C49. 50. ** ~~~ ** ...temperature difference = -0.33433 C51. 52. ** ~~~ ** ...calculated volume flow rate = 197273.21341 m3/s53. 54. ** ~~~ ** ...calculated mass flow rate = 237634.19357 kg/s55. 56. ** Warning ** ManageSizing: For a plant sizing run, there must be at least 1 Sizing:Plant object input. SimulationControl Plant Sizing option ignored.57. 58. ************* Testing Individual Branch Integrity59. 60. ************* All Branches passed integrity testing61. 62. ************* Testing Individual Supply Air Path Integrity63. 64. ************* All Supply Air Paths passed integrity testing65. 66. ************* Testing Individual Return Air Path Integrity67. 68. ************* All Return Air Paths passed integrity testing69. 70. ************* No node connection errors were found.71. 72. ************* Beginning Simulation73. 74. ************* Simulation Error Summary *************75. 76. ** Warning ** The following Report Variables were requested but not generated77. 78. ** ~~~ ** because IDF did not contain these elements or misspelled variable name -- check .rdd file79. 80. ************* Key=*, VarName=ZONE PACKAGED TERMINAL HEAT PUMP TOTAL COOLING ENERGY, Frequency=Hourly81. 82. ************* Key=*, VarName=ZONE PACKAGED TERMINAL HEAT PUMP TOTAL HEATING ENERGY, Frequency=Hourly83. 84. ************* Key=*, VarName=CHILLER ELECTRIC ENERGY, Frequency=Hourly85. 86. ************* Key=*, VarName=BOILER HEATING ENERGY, Frequency=Hourly87. 88. ************* Key=*, VarName=FAN ELECTRIC ENERGY, Frequency=Hourly89. 90. ************* Key=*, VarName=ZONE VENTILATION FAN ELECTRIC ENERGY, Frequency=Hourly91. 92. ************* Key=*, VarName=EARTH TUBE FAN ELECTRIC ENERGY, Frequency=Hourly93. 94. ************* Key=*, VarName=PUMP ELECTRIC ENERGY, Frequency=Hourly95. 96. ************* Key=*, VarName=ZONE VENTILATION TOTAL HEAT LOSS ENERGY, Frequency=Hourly97. 98. ************* Key=*, VarName=ZONE VENTILATION TOTAL HEAT GAIN ENERGY, Frequency=Hourly99. 100. ************* Key=*, VarName=EARTH TUBE ZONE SENSIBLE COOLING ENERGY, Frequency=Hourly101. 102. ************* Key=*, VarName=EARTH TUBE ZONE SENSIBLE HEATING ENERGY, Frequency=Hourly103. 104. ************* EnergyPlus Warmup Error Summary. During Warmup: 0 Warning; 0 Severe Errors.105. 106. ************* EnergyPlus Sizing Error Summary. During Sizing: 3 Warning; 1 Severe Errors.107. 108. ************* EnergyPlus Completed Successfully-- 5 Warning; 1 Severe Errors; Elapsed Time=00hr 00min 4.65sec109.…
imilar topic with a Windows 10 user, which successfully fixed this issue.If you are tiny little patient, I think we can try the same steps in your Windows 7 case.For start, try these three steps:1) Close Rhino. Restart your PC. 2) Once the PC boots up, double click on the "regMapWinGIS.cmd" file in "MapWinGIS" installation folder.3) When it closes the Command Prompt window it opened, try running Rhino, Grasshopper and drop the "Gismo Gismo" component on the canvas (Grasshopper working area).If this does not help (you get the same COM class factory CLSID error message coming out from the "Gismo Gismo" component), then try the following steps, one by one:
1) Close Grasshopper and Rhino2) Run the Revo Uninstaller Pro and uninstall your MapWinGIS application along with removing all the leftovers from the registry. You can download 30 days trial version of it from here. Here is a youtube example of a bit older Revo Uninstaller. But the important part is that is shows how registry leftovers are removed.3) Restart your PC, and once it boots again, make sure that you are logged in as an Adminstrator!4) In your Start menu's search box type: "UAC", which will find your User Account Control Settings. Click on it, and a new window will open. Set the bar on the left to "Never notify".5) Turn off your Antivirus, which ever it is.6) Download the 64 bit version of v4.9.4.2 MapWinGIS.7) Right click on downloaded MapWinGIS-only-v4.9.4.2-x64.exe file, and choose "Properties". If there is "Unblock" button click on it, and then click on "OK". If there is no "Unblock" button, just click on "OK".8) Left double click on MapWinGIS-only-v4.9.4.2-x64.exe file and install it to "C:\dev\MapWinGIS" folder. Choose "Full installation" during installation process!9) In your Start menu's search box type: "CMD". Once the "Command prompt" appears do not left click on it! Instead right click on it, and choose "Run as Administrator".10) A command prompt window will open. Type the following command:
"your_regsvr32_folder_path\regsvr32.exe" /u /s c:\dev\mapwingis\mapwingis.ocx
If command does not result in an error message, then type this one afterwards:
"your_regsvr32_folder_path\regsvr32.exe" /s c:\dev\mapwingis\mapwingis.ocx
11) If no error appeared again, then open your Rhino and Grasshopper and check what "Gismo Gismo" component prints from its "readMe!" output.If errors appeared, please post their screenshots. Thank you in advance.
Please accept my apologies for the large number of steps. Some of them are quite simple actually (click on this, download that...).…
Added by djordje to Gismo at 12:58pm on November 28, 2017
p to 32, not 30. I didn't see anything about the pattern that inspired me to generate the sequence parameterically, so I moved on to dividing the curve.
I entered the sequence of numbers in a 'Panel', parsed them using 'Text Split (Split on comma)', divided the length of the curve by their sum (32 from 'Mass Addition').
Multiply each number in the list by that result. This gives the length of each sub-curve/segment.
'Remap Numbers (ReMap)' lengths from '0 to curve length' to '0..1'.
Use 'Series' and 'Sub List (SubSet)' to sum up ('MA') the segment lengths preceding each curve point (0..0, 0..1, 0..2, 0..3, etc.). These are the 't' values needed for 'Shatter'.
'Flip' the output of 'MA' before passing the list of 't' values to 'Shatter'. "Flatten' would work here too but experience shows that 'Flip' works better if you want to handle multiple curves.
This works with any sequence of numbers as inputs - integers or floating points.
…
raboloids rotated 45° one from another).
1 - I have the dimensions (hight at the centre:5,9m ; at the vertex of the overhhang: 10 m ect)
2- my idea is to model one hypar and copy it after.
3- STEP 1modelling the parabola on the ZY plane knowing one point (x: 6,2; y: 0) and vertex (0 ; 11,5)
4 - rotate the parabola 30° (the structure has a overhang)
5 - model the second parabola known the first parabola vertex and the hight at the center
6 - create a loft surface (?)
7- copy and rotate 4 times
8- trim the extra off
My work so far is a real mess..can someone help me rationalized it in grasshopper instructions? Molte grazie…
frequency in Hz, however I am a bit confused on some of these other inputs and outputs, such as "NModes" for example.
Essentially, what we are trying to do is take a floor slab and:
1) Assign zones, such as corridors to the slab (presumably subdivided meshes)
2) Give that slab/zones a walking criteria (footfall in steps/minute) - corridors have a greater walking criteria for instance
3) Output the Mips (micro-inches per second) value for particular affected areas/zones on the slab - can be represented in some color range for the respective values accross the mesh.
4) Assign slab thickness based on optimized zones of vibration
So, to summarize - based on an input slab, we would like to calculate the mips produced on a floor-slab based on pedestrian footfall in steps/minute, then use this data to determine specific slab thicknesses. I am not sure if this can be achieved using the natural vibrations component or not, or if there are other tools that can achieve this calculation in Karamba.
Unfortunately I don't think I can provide an image at this moment, but it is basically a simple 30'x30' column grid in a 6x6 matrix, and more speculative at this point.
Either way, amazing tool! Cheers!…
ntainers and a list of items to be packed. Only rectangular items are recognized, so if the input consists of arbitrarily shaped BReps, their bounding boxes will be considered. It outputs a GH_Structure of items per container, and a supplementary list of items that did not fit in any container.
There is an option to choose whether sorting of elements and containers should be performed before packing. While sorting usually yields better results, disabling allows the user to perform their own sorting before inputing the elements to PackRat. There is an input for obstacles within the volume, as well as an option to select whether the objects to be packed may be rotated or not.
PackRat comes in two flavors: - A limited Evaluation version, available at non cost. - A full-functioning commercial version.
In addition to those two, version 0.4 of Packrat will remain available for free (non-commercial) use.
The evaluation version has the following limitations: Maximum number of elements to be packed cannot exceed 30. Maximum number of containers cannot exceed 3. The component will notify if any of the two limitations is in effect.
…
instead of ballooning outwards, just puffing upwards.
THIS WILL WORK! Creating the mesh springs is only three seconds for 200X200 and the Unary Force is still milliseconds. Only Kangaroo takes an initiation time then cycles rapidly (0.5 seconds each) and it only takes a few cycles, maybe a dozen or two.
There is considerable 3D aliasing from the 2D mesh crudeness.
Now, to best Laurent's scheme, let's double down to 400X400. First I disable Kangaroo, and the timer. The preparation takes...FOREVER....and...ever...4.6 minutes to cull the points is all, a trivial step there is likely a better strategy for than finding the ones on the inside then using those to cull duplicates from the whole collection. The springs only took 12 seconds and the forces again milliseconds.
Kangaroo, to initialize takes...after hitting the reset button to start it...over 15 minutes and counting...well 400X400 is 160K vertices and Rhino tends to bog down at 30K points...but it was done in 30 minutes. Then I enable the timer and each cycle takes...uh...it's not in any error mode but nothing is happening past a very faint first automatic cycle that shows in the mesh...yet no CPU power is being used by Rhino...well...it's simply not running...ah, well, there's just a dummy delay of another 5 minutes and then the cycles take 2.7 seconds...what a stupid delay that was not using CPU power.
Now that it's cycling, can I change the stiffness in real time, usually I can...well, no, I seem to be back in the 5 minute delay, but not the 30 minutes interface-locking one...still waiting. Here is a 1/4 scale height model of the above output:
Time's up, life goes on. The aliasing and slow speed make it unworkable except for little logos or something. Some math and parallel processing are needed?
…
Added by Nik Willmore at 5:51pm on February 21, 2016
onstrates the following:
1. The definition's functionality employing HumanUI for the custom user interface.
2. Color based segmentation in manual and auto modes.
3. The evaluation of the definition's ability to handle different point cloud data sets.
This definition performs color based segmentation in two modes.
A manual mode, that implements the Delta-E CIE 2000 color difference formula, for targeted feature detection. An auto mode, that employs a simple RGB Color Range algorithm for quicker preliminary results.
RGB to XYZ to CIELab conversion and Delta-E scripts were based on Colormine's project code from github. Results have been compared and verified with the results of http://colormine.org/color-converter and http://colormine.org/delta-e-calculator/Cie2000.
Each stored class is charted and can be accessed through the UI, as shown at 2:30, where Delta-E CIE 2000, in CieLab color space, output results were found to be in perceptive conformity with human eyes, far superior to the preliminary RGB implementation.
Initial definition versions could process highly subsampled clouds in acceptable timings. Further research showed that employing the multithread processing of Volvox components, bundling the Delta E formula with the RGB to CIE lab color conversion script, per color segmentation calculations for a one million points point cloud would go down from 23 (c# script component) and 8 (vb script component) seconds to approx. 1 second (volvox script cloud component), thus allowing the segmentation of less subsampled point clouds.
I would like to thank Heumann A. and Zwierzycki M. who provided direct support with HumanUI and Volvox. Also Grasshopper3d forum users Maher S. and Segeren P., who contributed with Rhino viewport manipulation scripts.
More on Volvox:
http://papers.cumincad.org/cgi-bin/works/Show?_id=ecaade2016_171&sort=DEFAULT&search=ecaade%20volvox&hits=2629
http://www.food4rhino.com/app/volvox
http://duraark.eu/
HumanUI:
http://www.food4rhino.com/app/human-ui?page=1&ufh=&etx=
ColorMine:
https://github.com/THEjoezack/ColorMine…
nteraction in the design of an enclosed volume.
Revolutions have occurred through architectural history and vary widely in terms of design methods and fabrication techniques. Focusing on inspiring natural form‐finding techniques, AA Athens VS works towards producing a large‐scale interactive prototype that alters in real‐time the perception of interior space.
Technology and architecture are coupled for the third year in Athens with a novel agenda of transforming an enclosed area and creating internal contrasting city‐life characteristics that transcend the local conditions. In collaboration with the National Technical University of Athens, Cipher City: Revolutions explores participatory design and active engagement modeling and continues building novel prototypes upon horizontal planes.
The toolset includes mainly ‐among others‐ Rhino Grasshopper, Processing and Arduino platforms. With the completion of the Programme participants receive the AA Visiting School Certificate. In 2013, the design agenda of AA Athens will connect with the agenda of AA Greece VS in the city of Patras. Participation in both Programmes will allow for a more extensive learning experience through additional tools like Autodesk Maya, Autodesk 3D Studio Max and more.
Discounts
The AA offers several discount options for participants wishing to apply as a group or participants wishing to apply for both AA Athens and AA Greece Visiting Schools:
1. Standard application
The AA Visiting School requires a fee of £600 per participant, which includes a £60 Visiting Membership. If you are already a member, the total fee will be reduced automatically by £60 by the online payment system. Fees are non-refundable.
2. Group registration
For group applications, there will be a range of discounts depending on the number of people in the group. The discounted fee will be applied to each individual in the group.
1. 3-6 people group: £60 (AA Membership fee) + 540*0.75 = £465 (25 %)
2. 6-15 people group: £60 + 540*0.70 = £438 (30%)
3. more than 15 people group: £60 + 540*0.65 = £411 (35%)
3. Participants attending AA Greece VS and AA Athens VS | 40% discount
For people wishing to attend both AA Greece VS and AA Athens VS, a discount of 40% will be made for each participant. (The participant will pay the £60 membership fee only once.)
£60 (AA Membership fee) + (540*0.60)*2 = £708
Eligibility The workshop is open to architecture and design students and professionals worldwide.
Applications
The deadline for applications is 24 March 2014. A portfolio or CV is not required, only the online application form and payment. The online application can be reached from:
http://www.aaschool.ac.uk/STUDY/VISITING/athens
Contact:
Alexandros.Kallegias@aaschool.ac.uk…
: Castellano
Horarios
Básico - miércoles
18.30 - 21.30 h
Avanzado - miércoles
15.00 - 18.00 h
Una vez finalizado el curso, el alumno podrá solicitar un diploma acreditativo del mismo.
Normativa: http://daetsam.aq.upm.es/servicios/cursos/informacion
Información cursos: http://daetsam.aq.upm.es/servicios/cursos/primavera2014
Métodos de pago: http://daetsam.aq.upm.es/noticias/2014/02/16/cursos-primavera-2014-aplicaciones-informaticas-e-idiomas
…