1 JUN to 31 DECBetween hours 1:00 to 24:00Current document units is in MetersConversion to Meters will be applied = 1.000[1 of 7] Writing simulation parameters...Ground temperature data contains monthly average temperatures at 3 different depths .5 meters (1st)2 meters (2nd)4meters (3rd)respectively[2 of 6] No context surfaces...[3 of 6] Writing geometry...[4 of 6] Writing materials and constructions...[5 of 7] Writing schedules...[6 of 7] Writing loads and ideal air system...[7 of 7] Writing outputs......... idf file is successfully written to : c:\ladybug\unnamed\EnergyPlus\unnamed.idf
Analysis is running!...c:\ladybug\unnamed\EnergyPlus\eplusout.csv......
Done! Read below for errors and warnings:
Program Version,EnergyPlus, Version 8.3.0-6d97d074ea, YMD=2015.05.24 11:32,IDD_Version 8.3.0
** Warning ** IP: Note -- Some missing fields have been filled with defaults. See the audit output file for details.
** Warning ** Version: in IDF="'8.1.0'" not the same as expected="8.3"
************* Beginning Zone Sizing Calculations
** Severe ** GetSurfaceData: Some Outward Facing angles of subsurfaces differ significantly from base surface.
** ~~~ ** ...use Output:Diagnostics,DisplayExtraWarnings; to show more details on individual surfaces.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 1 of back surface=AW0 is in front of receiving surface=EW0
** ~~~ ** (Dot Product indicator=17.0963)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 2 of back surface=AW0 is in front of receiving surface=EW0
** ~~~ ** (Dot Product indicator=17.0963)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 3 of back surface=AW0 is in front of receiving surface=EW0
** ~~~ ** (Dot Product indicator=17.1101)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 4 of back surface=AW0 is in front of receiving surface=EW0
** ~~~ ** (Dot Product indicator=17.1101)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 1 of back surface=AW1 is in front of receiving surface=EW0
** ~~~ ** (Dot Product indicator=17.1101)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 2 of back surface=AW1 is in front of receiving surface=EW0
** ~~~ ** (Dot Product indicator=30.0900)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 3 of back surface=AW1 is in front of receiving surface=EW0
** ~~~ ** (Dot Product indicator=30.0900)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 4 of back surface=AW1 is in front of receiving surface=EW0
** ~~~ ** (Dot Product indicator=17.1101)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 1 of back surface=AW2 is in front of receiving surface=EW0
** ~~~ ** (Dot Product indicator=30.0900)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 2 of back surface=AW2 is in front of receiving surface=EW0
** ~~~ ** (Dot Product indicator=30.0900)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 3 of back surface=AW2 is in front of receiving surface=EW0
** ~~~ ** (Dot Product indicator=30.0900)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 4 of back surface=AW2 is in front of receiving surface=EW0
** ~~~ ** (Dot Product indicator=30.0900)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 1 of back surface=AW3 is in front of receiving surface=EW0
** ~~~ ** (Dot Product indicator=30.0900)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 2 of back surface=AW3 is in front of receiving surface=EW0
** ~~~ ** (Dot Product indicator=30.0900)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 3 of back surface=EW1 is in front of receiving surface=EW0
** ~~~ ** (Dot Product indicator=17.0963)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 4 of back surface=EW1 is in front of receiving surface=EW0
** ~~~ ** (Dot Product indicator=17.0963)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 1 of back surface=GLZ_0_EW1_1F6383543B434F648813 is in front of receiving surface=EW0
** ~~~ ** (Dot Product indicator=0.9038)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 2 of back surface=GLZ_0_EW1_1F6383543B434F648813 is in front of receiving surface=EW0
** ~~~ ** (Dot Product indicator=0.9038)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 3 of back surface=GLZ_0_EW1_1F6383543B434F648813 is in front of receiving surface=EW0
** ~~~ ** (Dot Product indicator=16.0967)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 4 of back surface=GLZ_0_EW1_1F6383543B434F648813 is in front of receiving surface=EW0
** ~~~ ** (Dot Product indicator=16.0967)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 6 of back surface=FLOOR is in front of receiving surface=EW0
** ~~~ ** (Dot Product indicator=30.0900)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 7 of back surface=FLOOR is in front of receiving surface=EW0
** ~~~ ** (Dot Product indicator=30.0900)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 8 of back surface=FLOOR is in front of receiving surface=EW0
** ~~~ ** (Dot Product indicator=17.1101)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 9 of back surface=FLOOR is in front of receiving surface=EW0
** ~~~ ** (Dot Product indicator=17.0963)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 5 of back surface=CIELING is in front of receiving surface=EW0
** ~~~ ** (Dot Product indicator=17.0963)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 6 of back surface=CIELING is in front of receiving surface=EW0
** ~~~ ** (Dot Product indicator=17.1101)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 7 of back surface=CIELING is in front of receiving surface=EW0
** ~~~ ** (Dot Product indicator=30.0900)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 8 of back surface=CIELING is in front of receiving surface=EW0
** ~~~ ** (Dot Product indicator=30.0900)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 3 of back surface=AW6 is in front of receiving surface=EW1
** ~~~ ** (Dot Product indicator=17.0963)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 4 of back surface=AW6 is in front of receiving surface=EW1
** ~~~ ** (Dot Product indicator=17.0963)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 1 of back surface=WALLW1 is in front of receiving surface=EW1
** ~~~ ** (Dot Product indicator=17.0963)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 2 of back surface=WALLW1 is in front of receiving surface=EW1
** ~~~ ** (Dot Product indicator=17.0963)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 3 of back surface=WALLW1 is in front of receiving surface=EW1
** ~~~ ** (Dot Product indicator=17.0963)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 4 of back surface=WALLW1 is in front of receiving surface=EW1
** ~~~ ** (Dot Product indicator=17.0963)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 1 of back surface=GLZ_0_WALLW1_103854D39BEF453D8A4E is in front of receiving surface=EW1
** ~~~ ** (Dot Product indicator=17.0963)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 2 of back surface=GLZ_0_WALLW1_103854D39BEF453D8A4E is in front of receiving surface=EW1
** ~~~ ** (Dot Product indicator=17.0963)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 3 of back surface=GLZ_0_WALLW1_103854D39BEF453D8A4E is in front of receiving surface=EW1
** ~~~ ** (Dot Product indicator=17.0963)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 4 of back surface=GLZ_0_WALLW1_103854D39BEF453D8A4E is in front of receiving surface=EW1
** ~~~ ** (Dot Product indicator=17.0963)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 1 of back surface=EW0 is in front of receiving surface=EW1
** ~~~ ** (Dot Product indicator=17.0963)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 4 of back surface=EW0 is in front of receiving surface=EW1
** ~~~ ** (Dot Product indicator=17.0963)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 1 of back surface=GLZ_0_EW0_6AEDE94222384E5B8950 is in front of receiving surface=EW1
** ~~~ ** (Dot Product indicator=1.4709)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 2 of back surface=GLZ_0_EW0_6AEDE94222384E5B8950 is in front of receiving surface=EW1
** ~~~ ** (Dot Product indicator=1.4709)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 3 of back surface=GLZ_0_EW0_6AEDE94222384E5B8950 is in front of receiving surface=EW1
** ~~~ ** (Dot Product indicator=15.6696)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 4 of back surface=GLZ_0_EW0_6AEDE94222384E5B8950 is in front of receiving surface=EW1
** ~~~ ** (Dot Product indicator=15.6696)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 1 of back surface=FLOOR is in front of receiving surface=EW1
** ~~~ ** (Dot Product indicator=17.0963)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 2 of back surface=FLOOR is in front of receiving surface=EW1
** ~~~ ** (Dot Product indicator=17.0963)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 2 of back surface=CIELING is in front of receiving surface=EW1
** ~~~ ** (Dot Product indicator=17.0963)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Severe ** Problem in interior solar distribution calculation (CHKBKS)
** ~~~ ** Solar Distribution = FullInteriorExterior will not work in Zone="APRATMENT1"
** ~~~ ** because vertex 3 of back surface=CIELING is in front of receiving surface=EW1
** ~~~ ** (Dot Product indicator=17.0963)
** ~~~ ** Check surface geometry; if OK, use Solar Distribution = FullExterior instead.
** Warning ** ManageSizing: For a plant sizing run, there must be at least 1 Sizing:Plant object input. SimulationControl Plant Sizing option ignored.
************* Testing Individual Branch Integrity
************* All Branches passed integrity testing
************* Testing Individual Supply Air Path Integrity
************* All Supply Air Paths passed integrity testing
************* Testing Individual Return Air Path Integrity
************* All Return Air Paths passed integrity testing
************* No node connection errors were found.
************* Beginning Simulation
************* Simulation Error Summary *************
** Warning ** The following Report Variables were requested but not generated
** ~~~ ** because IDF did not contain these elements or misspelled variable name -- check .rdd file
************* Key=*, VarName=ZONE PACKAGED TERMINAL HEAT PUMP TOTAL COOLING ENERGY, Frequency=Hourly
************* Key=*, VarName=ZONE PACKAGED TERMINAL HEAT PUMP TOTAL HEATING ENERGY, Frequency=Hourly
************* Key=*, VarName=CHILLER ELECTRIC ENERGY, Frequency=Hourly
************* Key=*, VarName=BOILER HEATING ENERGY, Frequency=Hourly
************* Key=*, VarName=FAN ELECTRIC ENERGY, Frequency=Hourly
************* Key=*, VarName=ZONE VENTILATION FAN ELECTRIC ENERGY, Frequency=Hourly
************* Key=*, VarName=ZONE VENTILATION TOTAL HEAT LOSS ENERGY, Frequency=Hourly
************* Key=*, VarName=ZONE VENTILATION TOTAL HEAT GAIN ENERGY, Frequency=Hourly
************* There are 1 unused schedules in input.
************* There are 1 unused week schedules in input.
************* There are 3 unused day schedules in input.
************* Use Output:Diagnostics,DisplayUnusedSchedules; to see them.
************* EnergyPlus Warmup Error Summary. During Warmup: 0 Warning; 0 Severe Errors.
************* EnergyPlus Sizing Error Summary. During Sizing: 1 Warning; 49 Severe Errors.
************* EnergyPlus Completed Successfully-- 4 Warning; 49 Severe Errors; Elapsed Time=00hr 00min 4.59sec
Thanks Abraham.I really appreciate it.
Another thing ' I posted a discussion few days ago and got no replies.And this forum is the only 'Hope' for me..Can you quickly check it?thanks.
N
http://www.grasshopper3d.com/group/ladybug/forum/topics/free-form-external-wall-with-glazing-workflow?xg_source=activity
…
8.3.0 ************* IDF Context for following error/warning message: ************* Note -- lines truncated at 300 characters, if necessary... ************* 829 Construction, ************* indicated Name=PELLE001 ************* Only last 10 lines before error line shown.....
************* 832 AIR WALL2, !- - Layer 2 ************* 833 X-LAM, !- - Layer 3 ************* 834 POLYSTYRENE2, !- - Layer 4 ************* 835 PANNELLO VIP, !- - Layer 5 ************* 836 POLYSTYRENE2, !- - Layer 6 ************* 837 X-LAM, !- - Layer 7 ************* 838 LANA DI ROCCIAS, !- - Layer 8 ************* 839 VANO IMPIANTI, !- - Layer 9 ************* 840 LANA DI ROCCIAS, !- - Layer 10 ************* 841 LASTRA IN GESSOFIBRA, !- - Layer 11 ** Severe ** IP: IDF line~841 Error detected for Object=CONSTRUCTION ** ~~~ ** Maximum arguments reached for this object, trying to process ->LASTRA IN GESSOFIBRA<- ************* IDF Context for following error/warning message: ************* Note -- lines truncated at 300 characters, if necessary... ************* 985 Construction, ************* indicated Name=ROOF001 ************* Only last 10 lines before error line shown..... ************* 988 TRAVETTI, !- - Layer 2 ************* 989 TAVOLATO, !- - Layer 3 ************* 990 POLYSTYRENE2, !- - Layer 4 ************* 991 PANNELLO VIP, !- - Layer 5 ************* 992 POLYSTYRENE2, !- - Layer 6 ************* 993 X-LAM, !- - Layer 7 ************* 994 LANA DI ROCCIAS, !- - Layer 8 ************* 995 VANO IMPIANTI, !- - Layer 9 ************* 996 LANA DI ROCCIAS, !- - Layer 10 ************* 997 LASTRA IN GESSOFIBRA, !- - Layer 11 ** Severe ** IP: IDF line~997 Error detected for Object=CONSTRUCTION ** ~~~ ** Maximum arguments reached for this object, trying to process ->LASTRA IN GESSOFIBRA<- ** Warning ** IP: Note -- Some missing fields have been filled with defaults. See the audit output file for details. ** Severe ** IP: Possible incorrect IDD File ** ~~~ ** IDD Version:"IDD_Version 8.3.0" ** ~~~ ** Version in IDF="8.3" not the same as expected="8.3" ** ~~~ ** Possible Invalid Numerics or other problems ** Fatal ** IP: Errors occurred on processing IDF file. Preceding condition(s) cause termination. ...Summary of Errors that led to program termination: ..... Reference severe error count=3 ..... Last severe error=IP: Possible incorrect IDD File ************* Warning: Node connection errors not checked - most system input has not been read (see previous warning). ************* Fatal error -- final processing. Program exited before simulations began. See previous error messages. ************* EnergyPlus Warmup Error Summary. During Warmup: 0 Warning; 0 Severe Errors. ************* EnergyPlus Sizing Error Summary. During Sizing: 0 Warning; 0 Severe Errors. ************* EnergyPlus Terminated--Fatal Error Detected. 1 Warning; 3 Severe Errors; Elapsed Time=00hr 00min 0.34sec
My question is how i can fix it ??? and why it tell me that:
** Severe ** IP: Possible incorrect IDD File** ~~~ ** IDD Version:"IDD_Version 8.3.0"** ~~~ ** Version in IDF="8.3" not the same as expected="8.3"** ~~~ ** Possible Invalid Numerics or other problems** Fatal ** IP: Errors occurred on processing IDF file. Preceding condition(s) cause termination....Summary of Errors that led to program termination:
Help me pleaseeeeeeee
Happy new year!!!!!…
8.3.0************* IDF Context for following error/warning message:************* Note -- lines truncated at 300 characters, if necessary...************* 829 Construction,************* indicated Name=PELLE001************* Only last 10 lines before error line shown.....
************* 832 AIR WALL2, !- - Layer 2************* 833 X-LAM, !- - Layer 3************* 834 POLYSTYRENE2, !- - Layer 4************* 835 PANNELLO VIP, !- - Layer 5************* 836 POLYSTYRENE2, !- - Layer 6************* 837 X-LAM, !- - Layer 7************* 838 LANA DI ROCCIAS, !- - Layer 8************* 839 VANO IMPIANTI, !- - Layer 9************* 840 LANA DI ROCCIAS, !- - Layer 10************* 841 LASTRA IN GESSOFIBRA, !- - Layer 11** Severe ** IP: IDF line~841 Error detected for Object=CONSTRUCTION** ~~~ ** Maximum arguments reached for this object, trying to process ->LASTRA IN GESSOFIBRA<-************* IDF Context for following error/warning message:************* Note -- lines truncated at 300 characters, if necessary...************* 985 Construction,************* indicated Name=ROOF001************* Only last 10 lines before error line shown.....************* 988 TRAVETTI, !- - Layer 2************* 989 TAVOLATO, !- - Layer 3************* 990 POLYSTYRENE2, !- - Layer 4************* 991 PANNELLO VIP, !- - Layer 5************* 992 POLYSTYRENE2, !- - Layer 6************* 993 X-LAM, !- - Layer 7************* 994 LANA DI ROCCIAS, !- - Layer 8************* 995 VANO IMPIANTI, !- - Layer 9************* 996 LANA DI ROCCIAS, !- - Layer 10************* 997 LASTRA IN GESSOFIBRA, !- - Layer 11** Severe ** IP: IDF line~997 Error detected for Object=CONSTRUCTION** ~~~ ** Maximum arguments reached for this object, trying to process ->LASTRA IN GESSOFIBRA<-** Warning ** IP: Note -- Some missing fields have been filled with defaults. See the audit output file for details.** Severe ** IP: Possible incorrect IDD File** ~~~ ** IDD Version:"IDD_Version 8.3.0"** ~~~ ** Version in IDF="8.3" not the same as expected="8.3"** ~~~ ** Possible Invalid Numerics or other problems** Fatal ** IP: Errors occurred on processing IDF file. Preceding condition(s) cause termination....Summary of Errors that led to program termination:..... Reference severe error count=3..... Last severe error=IP: Possible incorrect IDD File************* Warning: Node connection errors not checked - most system input has not been read (see previous warning).************* Fatal error -- final processing. Program exited before simulations began. See previous error messages.************* EnergyPlus Warmup Error Summary. During Warmup: 0 Warning; 0 Severe Errors.************* EnergyPlus Sizing Error Summary. During Sizing: 0 Warning; 0 Severe Errors.************* EnergyPlus Terminated--Fatal Error Detected. 1 Warning; 3 Severe Errors; Elapsed Time=00hr 00min 0.34sec
My question is how i can fix it ??? and why it tell me that:
** Severe ** IP: Possible incorrect IDD File** ~~~ ** IDD Version:"IDD_Version 8.3.0"** ~~~ ** Version in IDF="8.3" not the same as expected="8.3"** ~~~ ** Possible Invalid Numerics or other problems** Fatal ** IP: Errors occurred on processing IDF file. Preceding condition(s) cause termination....Summary of Errors that led to program termination:
Help me pleaseeeeeeee
Thanks and Happy new year!!!!!…
R Light Studio - Georg Sochurek Schnelle Beleuchtungsoptimierung mit HDR Light Studio: HDRI-Environment-Maps in Echtzeit ganz einfach erstellen und bearbeiten 10:45 - 11:45: C4D und Adobe Photoshop - Christoph Schindelar Prototyping für einen Wintersportartikel-Hersteller mit Cinema 4D 12:00 - 13:00: Autodesk 3ds max - Daniel Daghofer Software für 3D-Modellierung und Animation 13:30 - 13:30 Pause 13:30 - 14:30: MODO - Mathias Zellerhof Produktdesign leicht gemacht - mit modo 701 von TheFoundry 14:45 - 15:45: Rhino 5 - Dipl. Ing. Fabio Palvelli Advanced NURBS-Modelling mit Rhino 5 für Designer und Architekten 16:00 - 17:00: Autodesk Maya - David Wuchte Umfassende 3D-Animationssoftware 17:15 - 18:15: 3D Coat - Christoph Schindelar Feinmodellierung (Sculpting) & Design von Handy-Designelementen mit 3D Coat Zusätzlich haben Sie die Möglichkeit in den Pausen / im Anschluß div. Hardware zu testen / anzusehen: Monitore: CG Serie von EIZO (inkl. Swing Sensor/Colorimeter) EIZO Foris mit EIZO Spyder EIZO Touchscreen NEC Spectraview Reference inkl. X-Rite Colorimeter Stiftdisplays: WACOM Cintiqs 3D Mäuse: SpaceMouse Pro SpacePilot Pro…
Ruby, [9] R, [10] PHP ,[11] MATLAB [12]
Maybe it can find it's way into GH somehow..
when using the default GH random number generator i mostly use much higher seed values.…
Added by Robert Vier at 10:08am on December 27, 2012
ace Syntax." eCAADe 2013 18 (2013): 357.
http://www.sss9.or.kr/paperpdf/mmd/sss9_2013_ref048_p.pdf
The measure Entropy is newer. I hereby explain it (from my PhD dissertation):
Entropy values, as described in (Hillier & Hanson, The Social Logic of Space, 1984) and specified in (Turner A. , “Depthmap: A Program to Perform Visibility Graph Analysis, 2007), intuitively describe the difficulty of getting to other spaces from a certain space. In other words, the higher the entropy value, the more difficult it is to reach other spaces from that space and vice-versa. We compute the spatial entropy of the node as using the point depth set:
(11)
“The term is the maximum depth from vertex and is the frequency of point depth *d* from the vertex” (ibid). Technically, we compute it using the function below, which itself uses some outputs and by-products from previous calculations:
Algorithm 4: Entropy Computation
Given the graph (adjacency lists), Depths as List of List of integer, DepthMap as Dictionary of integer
Initialize Entropies as List(double)
For node as integer in range [0, |V|)
integer How_Many_of_D=0
double S_node=0
For depth as integer in range [1, Depths[node].Max()]
How_Many_of_D=DepthMap.Branch[(node,depth)].Count
double frequency= How_Many_of_D/|V|
S_node = S_node - frequency * Math.Log(frequency, 2)
Next
Entropies [node] = S_node
Next
…
ated in all editions of Architektura Parametryczna Workshops!Architektura Parametryczna Workshops Optimization Warsaw 2016 FAQWHEN?21-22nd May 2016 (Saturday-Sunday)HOW LONG DO THE WORKHSOPS LAST?The workshops last in total 16 hours.Saturday 10AM -7PM (with lunch break), Sunday 10AM -7PM (with lunch break)WHAT WILL I LEARN?On Saturday the optimization processes with solar, views and structural analysis will be explored. We will be discovering optimal solutions with the help of plug-ins such as Galapagos, Silvereye, Octopus, Karamba and Ladybug. In the Sunday morning we will learn how to present the results of the optimization: creating catalogues of solutions and printing the optimization graphs. In the afternoon participants will have time for the development of the personal project. HOW MUCH DOES IT COST?The workshops cost 600 PLN (or 160€) for Early Bird payments and 700 PLN (or 190€) for the regular payments. The 3-person group - 1500 PLN (or 440€ )EARLY BIRD?For those who are certain that they will attend the workshops, we have a special Early Bird offer till 30th of April 2016.HOW CAN I SIGN UP?Send an email to info@architekturaparametryczna.pl with the title: “OPTI WAW 16”.HOW MANY PLACES ARE AVAILABLE?We have only 11 places!WORKSHOPS: Level: intermediate – advancePerquisites: the basic knowledge of Rhino and Grasshopper3D. Plug-ins: Silvereye, Octopus, Ladybug, Karamba. Weaverbird. Python GHThe main aim of the 16-hour workshops is to give the participants the understanding of how the optimization process can be used in practice and how it can help in solving everyday design problems. The practical exercise will be supported with the short lectures explaining the theoretical background of the optimization algorithms. The general program of the Optimization Warsaw 2016 Workshops*:1. Optimization of the facade geometry with solar analysis.2. Optimization of the roof structures with Karamba.3. Finding the optimal configuration of the space frame structures with Karamba.4. Discovering the best location or/and geometry of the building in accordance to the best views from the plot.5. Presentation of the discovered solutions. *Some of the exercises might be changed.…
by joining 2 Breps, each of which is a Loft surface made from 11 plane curves rotated by different amounts. The first BRep looks like this
and the second one is the same geometry, but with the curve rotations reversed (x * (-1)):
Apparently performing the curve rotation using reversed values causes the resulting surface normals to be reversed also. I've tried numerous methods (including mesh operations) to reverse them back, but nothing seems to actually do that. So I am hoping that someone here can point me in the direction of how to do this successfully.
My overall objective is to print parts that look like the old fashioned faceted cut glass bowls and trays.
…
Added by Birk Binnard at 1:46pm on September 12, 2016
al read” component in grasshopper.
But somehow it seems that the command line “TempSensor.requestTemperatures();” makes the firefly firmata somehow unstable. I have also connected 5 servo motor which move strangely irregular/wrong when the command line above is in the program. So, when I for example only control the "Digital Pin 12" in grasshopper it mainly moves the servo on Pin 11 (!) but also a bit time delayed the servo on Pin 12.
Do you have any ideas? It has to be something inside the “#include <DallasTemperature.h>” (Libary for the temperature sensor) which doesnt go together with the firefly firmata und gets something wrong in the "void WriteToPin" firmata command
Or do you may have any working codes for implementing a temperature sensor? Its doenst have to be the one i have, I could get another one.
here you can see the code: http://txt.do/drqao (a simplified version of the latest firmata including my TempSensor lines marked with "//...//TEST")
Thanks! Julian…
bro su Grasshopper "Architettura Parametrica", co-director della AA Rome Visiting School per la Architectural Association di Londra (http://www.arturotedeschi.com/).
Il corso introdurrà il software Grasshopper, plug-in per la modellazione parametrica in Rhino. I partecipanti saranno guidati attraverso gli aspetti più importanti del programma e le principali tecniche per la programmazione visuale all’interno di Rhinoceros. Il corso è rivolto a studenti con esperienza minima nella modellazione 3D e si articolerà in lezioni teoriche ed esercitazioni. Sarà rilasciato un attestato di partecipazione.
principali argomenti: - Introduzione alla progettazione parametrica: teoria, esempi, casi studio - Grasshopper: concetti base, logica algoritmica, interfaccia grafica - Nozioni fondamentali: componenti, connessioni, data flow - Funzioni matematiche e logiche, serie, gestione dei dati - Analisi e definizione di curve e superfici - Definizione di griglie e pattern complessi - Trasformazioni geometriche - Data tree: gestione di dati complessi - Meshes e Subdivision Surfaces (Weaverbird)
GENOVA 11 > 14 APRILE 2013 programma completo ed iscrizioni…