ake a network of lines (i.e. a graph) and make a Plankton Mesh, from which you can use Cytoskeleton to make a solid mesh (and then smooth it with Weaverbird).
Works with ngons (polygons with 3 or more sides). Other examples I found only worked with tris and quads.
Works on open or closed surfaces
While these examples start with a surface, you could start with a network of lines and make a patch surface
This is meant for 2D networks/surfaces. I haven't attempted filling a 3D volume. My guess is this wouldn't work as it would require a non-manifold mesh that Plankton wouldn't handle.
Note similar results could be achieved with the following:
TSplines
MeshDual (dual of a tri mesh, not as much freedom/control)
Working backwards, here is the GhPython script from Will Pearson that builds a Plankton Mesh from vertices and faces. The vertices are a list of 3D coordinates, the faces are a tree a lists, with each list containing the indices of vertices that form a closed loop. From Will, "Plankton only handles manifold meshes, i.e. meshes which have a front and a back. This orientation is determined by the "right-hand rule" i.e. if the vertices of a face are ordered counter-clockwise then the face normal will be out of the page/screen."
# V: list of Point3d # F: tree of int
import Grasshopper appdata = Grasshopper.Folders.DefaultAssemblyFolder
import clr clr.AddReferenceToFileAndPath(appdata + "Plankton.dll")
import Plankton
pmesh = Plankton.PlanktonMesh()
for pt in V: pmesh.Vertices.Add(pt.X, pt.Y, pt.Z)
for face in F.Branches: face = list(face)[:-1] pmesh.Faces.AddFace(face)
These vertices and faces are precisely the output from Starling. Starling takes in a list of Polylines which form the (properly oriented) face loops.
The polyline face loops can be generated...
Directly from Panels on a surface using LunchBox
Using any network of lines/curves on a surface (curves will need to be converted to polylines before Starling)
The latter was achieved using the Surface Split command, then converting the face edges (converted to curves) into polyline loops to represent faces.
…
). It deals with the potential possibility to port GH into AEC fields (real-life AEC fields, nothing to do with academic thinking). The bad news are that the smart AEC sector is occupied solely by Bentley/GenComp – expect soon Revit/Dynamo as well (not to mention CATIA). The good news are that there’s millions of designers/engineers/industrial designers out there who could be interested for a 3rd alternative.
Intro: Well, in the old days (when men had mustache and muttonchops) AEC design performed in a nice top-to-bottom sequence (kinda like a vector) : the Big Man (aka The Brain) did some sketches (with crayons) and the rest (known as the “others”) struggled to make The Idea a reality. Today things are different, mind. Or they should be different. Or may be different. Or whatever. The big easy:For a zillion o reasons (AEC matures, PLM, cost, outsourcing, sustainable engineering…add several more) this vector like process of the past is like a Brown motion these days: Right down the moment that you (or your team) “sketch” The Big Idea … another team design simultaneously (i.e. in parallel) the components (parts) that compose the whole. This is the so called bottom-to-top design mentality. So the whole and the parts meet in some "middle point" instead the later being dictated by the former. In quite a few occasions parts dictate the whole (cost, cost and cost being the main reasons). The more a design is contemporary the more this bottom-to-top thing plays a critical role. Ignore it and have a very big time (sooner or later).The bad news:If you accept the above…well GH – at present phase - is not ready for contemporary AEC work. At.All.3 Main reasons for that:1.You can’t use parametric parts (i.e. nested blocks to speak Rhino language) into a given definition (in this case attached : truss nodes, connection flanges, mount plates, cable tensioners, planar glazing components, roof skin components…etc etc). This is obviously a Rhino domain.2.You can’t bake a given solution in such a way that the Rhino file is structured (i.e. assemblies of nested blocks). Or you can do it theoretically writing some VB/C code – but the core of the matter is that corresponding components are MIA. That means that you can’t export anything useful actually into established AEC oriented apps and/or established MCAD apps (for doing/calculating the parts for real-life production).3.The GH process can’t being interrupted. Imagine defining, say, a building “envelope” in GH and then …er…use Evolute tools in order to optimize things (say quad planarization and the likes). Then …continue in GH for more detailed work. Then design the parts as in 1 above. Then back to Evolute. Then back to GH.So…if anyone is interested I would be glad to start the mother of all debates and/or some kind of crusade (GH for President, that is).PS: This definition is a WIP thing – more refined stuff to follow (in particular a complex canopy tubes pre-stress system).
PS: Tree8 components are used sporadically.
PS: Use Saved Views
May the Dark Force be with us.Best, Peter …
. From the Thermal Comfort Indices component, Comfort Index 11 (TCI-11):MRT = f(Ta, Tground, Rprim, e)
with:- Ta = DryBulbTemperature coming from ImportEPW component- Tground = f(Ta, N) where N comes from totalSkyCover input. Tground influences the long-wave radiation emitted by the ground in the MRT calculation.- Rprim defined as solar radiation absorbed by nude man = f(Kglob, hS1, ac)- ac is the clothingAlbedo in % (bodyCharacteristics input)- I can't find any definition in the code of Kglob and hS1. Could you tell me please what are those values referencered to? --> probably the globalHorizontalRadiation but how?- e = vapour pressure calculated from Ta and Relative Humidity input
Do you agree that in this case the MRT does not depend on these inputs: location, meanRadiantTemperature, dewPointTemperature and wind speed?It does not depend neither on the other bodyCharacteristics like bodyPosture, age, sex, met, activityDuration...?
MRT calculated by the TCI-11 method is the mean radiant temperature of a vector pointing vertically with a sky view factor of 100%?For ParisOrly epw,
2. From the SolarAdjustedTemperature component (that seems to be more used for the UTCI calculation examples on Hydra compared to TCI-11).
In contrast to the TCI-11, this component distinguishes diffuse and direct radiation and contextualizes the calculation thanks to _ContextShading input, right? It can also be applied to a mannequin thanks to the CumSkyMatrix and thus evaluate the dishomogeneity of radiation exposure.This component seems not to consider the influence of vapour pressure on the result --> is it then more precise to put the MRT output (from the TCI) as an input of meanRadTemperature for SolarAdjustedTemperature?The default groundReflectivity is set to 0.25 --> is GroundReflectivity taken into account in the Tground or MRT calculation in the TCI component? If yes, what is the hypothesised groundReflectivity?The default clothing albedo of 37% (TCI-11 bodyCharacteristics) corresponds to Clothing Absorptivity of 63%?
If the CumSkyMatrix input is not supplied, I get 9 results for the mannequin --> where are those points/results coming from?
If the CumSkyMatrix input is supplied,I suppose the calculation of the 482 results correspond to a calculation method similar to the radiation analysis component that is averaged over the analysis period. Right?But I don't understand why the mannequin is composed of 481 faces and meshFaceResult gives 482 results.
Finally, what is the link between the MESH results, the solarAdjustedMRT and the Effective Radiant field ? Is there a paper to have a detailed explanation of the method?
3. Here are some results for the ParisOrly energyplus weather data. You can find here attached the grasshopper definition.There is no shading in this simulation and the result coming from the ThermalComfort indices for MRT is very different compared to the solar adjusted MRT.Why such a big difference and which of the result should be plugged into the UTCI calculation component?
Results for ParisOrly.epwM,D,H:1,1,12
Ta : 6.5°Crh: 100%globalHorizontalRadiation: 54 Wh/m2totalSkyCover: 10MRT (TCI-11): 1.2°C
_CumSkyMtxOrDirNormRad = directNormalRadiation : 0 Wh/m2diffuseHorizontalRad: 54 Wh/m2_meanRadTemp = TasolarAdjustedMRT: 10.64°CMRTDelta: 4.14°C
_CumSkyMtxOrDirNormRad = CumulativeSkyMtxdiffuseHorizontalRad: 54 Wh/m2_meanRadTemp = TasolarAdjustedMRT: 10.47°CMRTDelta: 3.97°C
_CumSkyMtxOrDirNormRad = CumulativeSkyMtxdiffuseHorizontalRad: 54 Wh/m2_meanRadTemp = MRT (TCI-11)solarAdjustedMRT: 5.17°CMRTDelta: 3.97°C
Thanks a lot for your helpRegards,
Aymeric
…
n be obtained for curved NURBS surfaces as well as unconventional window configurations".
And I also noticed the following information form the optional input in the runEnergySimulation component.
"meshSettings_: Optional mesh settings for your geometry from any one of the native Grasshopper mesh setting components. These will be used to change the meshing of curved surfaces before they are run through EnergyPlus (note that meshing of curved surfaces is done since Energyplus is not able to calculate heat flow through non-planar surfaces). Default Grasshopper meshing is used if nothing is input here but you may want to decrease your calculation time by changing it to Coarse or increase your curvature definition (and calculation time) by making it finer".
1) My case is an one-story, rectangular-plan large hall (40m*70m*25m) with a curved roof. The roof surface is a part of a standard sphere and the walls and floor are all planar (the each wall has one curved edge as showed in the image).
For testing, I threw the original curved roof surface into daylight and energy simulations without making customized meshings, because I assumed that it might be automatically converted to meshs by Honeybee - Am I right? As showed in the image, how can I reduce the number of meshs in a proper way? Must two connected surfaces (i.e. wall and roof) be STRICTLY/SEAMLESSLY connected or not (considering different divisions of meshs in the respective surface)? - Is a connection tolerance allowed?
2) But, when I run the annual daylight simulation for this case, it gave me a lot of warnings "oconv: warning - zero area for polygon".- is that normal? and how to avoid this? Does the daylight simulation allow "curved NURBS surfaces"?
3) Moreover, when I run an energy simulation for this case, it costed extremely long time. It was just so long that I did not even have results out of one simulation. - I guessed it might be the problem caused by the curved roof surface (or automatic meshing?), but I don't have experience of converting a curved NURBS/spheral surface into correct meshs that can be recognized by Honeybee simulations (Daylight and Energy) in a proper way.
4) The large window on the wall was generated by the "_glzRatio". But the automatically generated wall meshs around this window are just too "fine", which might largely increase simulation time. Is there a proper way to get rid of it? (Considering that the size, shape and position of the window will have large influence on the daylight distribution in the building, it is worthy to keep the size, shape and position of the window as it should be in reality).
In sum, considering all above, could your please provide me some suggestions/tutorials/links that might be helpful for dealing with "curved NURBS surfaces" in Honeybee simulations.
Thank you all in advance!
Best,
Ding
…
Karamba.
I am using your plug-in for normal forces evaluation in the transvere wires and spreaders of a sailboat. Mast is solved in another way, so I am not taking forces from Karamba in that case.
Basing on the forces value an adequate wire size (diameter) is choosen. Then masses of wires are being calculated. Loads (forces) on longitudinal wires are calculated without Karamba. The problem is when choosing transverse wires’ mass minimization as a criteria, the Octopus doesn’t get any results - is changing the sliders (genes) too fast for Karamba to calculate the forces (so Octopus gets only nulls):
When minimization of a e.g. longitudinal wires’ mass (calculated without Karamba) is taken as a criteria Octopus works fine.
Which suggests that the problem is in interaction of two plug-ins.
Any ideas how to avoid that problem?
Thanks,
M.
Below some screenshots of definition part with Karamba:
1675×807 200 K
image.png1680×789 398 KB
Despite the ‘orange warning’ the values are correct (double checked with other software).However I don't know why does it say that there is a part that can move freely without deformation,as the model looks like this:
image.png1239×343 55.5 KB
…
ne – power of the many è un corso advanced level che studia la produzione di effetti complessi a partire dalla modellazione di comportamenti semplici su un insieme strutturato con un numero alto di elementi. Attraverso un approccio generico e scaleless sarà possibile affrontare la tematica generale su più fronti e in una molteplicità di declinazioni possibili. Il corso è rivolto a chi,indipendentemente dal proprio background (urbanistica, architettura, ingegneria, design, arte o altro) già possiede una esperienza di base con Rhinoceros e Grasshopper, e desidera sviluppare aspetti di gestione avanzata del flusso di articolato di informazioni attraverso una strategia guidata basata su esempi pratici e sull’implementazione di un progetto personale sul tema generale del “field behaviour”. Sarà trattato anche l’utilizzo di alcuni plug-ins quali gHowl e WeaverBird. Il numero dei partecipanti è fissato a un massimo di 20 per offrire un tutoraggio proficuo ed una effettiva esperienza di learning ad ogni iscritto.
[.] Temi:
teoria
. complessità, emergence, effetti di campo (field behaviour), sensibilità, efficienza multiperformance
tecnica
. dati:gestione e manipolazione avanzata del data tree, streaming e visualizzazione; transizione, blending e modulazione delle geometrie; generazione e controllo multiperformance di popolazioni di componenti; attrattori, drivers e tecniche di modulazione avanzate; uso delle mesh con WeaverBird; ottimizzazione con Galapagos
[.] Dettagli :
Tutors: Alessio Erioli + Andrea Graziano – Co-de-iT
Si richiede esperienza di base nella modellazione in Rhino (equivalente a Rhino training Level 1, il Level 2 è gradito – la documentazione per il training è disponibile gratuitamente all’indirizzo: http://download.rhino3d.com/download.asp?id=Rhino4Training&language=it) e nell’uso di Grasshopper (la suddivisione di una superficie NURBS in componenti tramite isotrim è data come base assodata)
. luogo:
IreCoop – via Vasco De Gama 27 _ Firenze
. durata:
25-27 febbraio 2010 – 3 giornate consecutive _ orario 9:00 – 18:00
. costo:
professionisti – 450.00 € studenti – 280.00 €
. note:
scadenza iscrizioni: 20 febbraio 2010 il corso sarà attivato con un numero minimo di 15 iscritti al termine sarà rilasciato un attestato di frequenza gli iscritti dovrano venire muniti dei propri laptop con software installato. una versione free per 30 giorni è disponibile sul sito www.rhino3d.com
. contatti:
iscrizioni + info alloggi: www.irecooptoscana.it (Cosa offriamo > formazione > altri corsi)
info sul corso: info@co-de-it.com…
er). With the command "End Bulge" I noticed that G2 moves perpendicular to G1! But with an increase which is not equal... and is different, every time, depending on the angle between G0 and G1 and G2. How do I predict the position of G2 compared to G1 simulating the "End Bulge" command? Thank you for your professional answers.
^___^
Below you can see an example with a curve crimson ... If I move G1 of 1 unit G2 moves of 0.42 units (perpendicular) .. If I move of 2 units the next step is 0.46 unit... 3 units --> step 0,50 units... etc.
And each time changes depending on the initial conditions (G0/G1/G2 angle).
…
Added by Lucius Santo at 4:21pm on September 20, 2012
or GH with: 1. Animation Timeline 2. Rendering 3. API
Summary:
Animation Timeline: Smooth animation system that plays at the real-world speed; so you know the robot will run just right when you upload the code.
Rendering: Extensive options and outputs; so you can generate amazing videos.
API: Access our functions through Python and C# scripting; so you can manage parameters and actions for complex processes for each target.
More info:
Animation Timeline:
Build an animation from a list of Planes, it's that easy! Get these from points, curves or surfaces. Download the example files with the trial and test it yourself.
The unique Timeline component displays all the important robot warnings and the digital Input/Ouput:
RED – clash detection BLUE - singularities YELLOW – over rotation ORANGE – out of reach Digital Inut/Output: red=off, green=on
Rendering:
IO smoothly interpolates between all the Planes you set. This means you can generate keyframes for positions between Planes too e.g. you have two planes defining a tool path, IO can generate 2000 keyframes. Smooooth!
Rendered in full colour as standard, not GH red :-)
LiveBaking - let's you use Rhino render settings in real-time (can be a bit slow!)
Slider animation - use the native 'Animate' option to export hi-res images and create videos easily. Just set the number of frames you need (hint: divide total time in seconds by the frames-per-second rate)
Bake unlimited meshes as keyframes for export to render-pipelines in 3DS etc.
API
Accessing the IO functions through Python and C# let's you build more powerful definitions. You can assign data to every position the robot reaches, allowing you to control speed, acceleration, wait-times, actions and more. Examples comparing C# with Python are included in the examples files.
You can also use teh API build your own plugins that use the IO timeline to do all the hard work like IK and creating valid code, while you enjoy developing your new process...
Check out the website for more features and videos of the example definitions: www.robots.io
Download the PDF guide: 150314_IO_Primer_v1.pdf.
See www.robots.io for more info and pricing.
Developed by RoboFold Ltd. Used by leading academics, researchers and professionals.
…
Added by Gregory Epps at 10:15am on November 7, 2014
t. So here we go!
1. Honeybee is brown and not yellow [stupid!]...
As you probably remember Honeybee logo was initially yellow because of my ignorance about Honeybees. With the help of our Honeybee expert, Michalina, now the color is corrected. I promised her to update everyone about this. Below are photos of her working on the honeybee logo and the results of her study.
If you think I'm exaggerating by calling her a honeybee expert you better watch this video:
Thank you Michalina for the great work! :). I corrected the colors. No yellow anymore. The only yellow arrows represent sun rays and not the honeybee!
2. Yellow or brown, W[here]TH Honeybee is?
I know. It has been a long time after I posted the initial video and it is not fun at all to wait for a long time. Here is the good news. If you are following the Facebook page you probably now that the Daylighting components are almost ready.
Couple of friends from Grasshopper community and RADIANCE community has been helping me with testing/debugging the components. I still think/hope to release the daylighting components at some point in January before Ladybug gets one year old.
There have been multiple changes. I finally feel that the current version of Honeybee is simple enough for non-expert users to start running initial studies and flexible enough for advanced users to run advanced studies. I will post a video soon and walk you through different components.
I think I still need more time to modify the energy simulation components so they are not going to be part of the next release. Unfortunately, there are so many ways to set up and run a wrong energy simulation and I really don’t want to add one new GIGO app to the world of simulation. We already have enough of that. Moreover I’m still not quite happy with the workflow. Please bear with me for few more months and then we can all celebrate!
I recently tested the idea of connecting Grasshopper to OpenStudio by using OpenStudio API successfully. If nothing else, I really want to release the EnergyPlus components so I can concentrate on Grasshopper > OpenStudio development which I personally think is the best approach.
3. What about wind analysis?
I have been asked multiple times that if Ladybug will have a component for wind study. The short answer is YES! I have been working with EFRI-PULSE project during the last year to develop a free and open source web-based CFD simulation platform for outdoor analysis.
We had a very good progress so far and our rockstar Stefan recently presented the results of the work at the American Physical Society’s 66th annual DFD meeting and the results looks pretty convincing in comparison to measured data. Here is an image from the presentation. All the credits go to Stefan Gracik and EFRI-PULSE project.
The project will go live at some point next year and after that I will release the Butterfly which will let you prepare the model for the CFD simulation and send it to EFRI-PULSE project. I haven’t tried to run the simulations locally yet but I’m considering that as a further development. Here is how the component and the logo looks like right now.
4. Teaching resources
It has been almost 11 months from the first public release of Ladybug. I know that I didn't do a good job in providing enough tutorials/teaching materials and I know that I won’t be able to put something comprehensive together soon.
Fortunately, ladybug has been flying in multiple schools during the last year. Several design, engineering and consultant firms are using it and it has been thought in several workshops. As I checked with multiple of you, almost everyone told me that they will be happy to share their teaching materials; hence I started the teaching resources page. Please share your materials on the page. They can be in any format and any language. Thanks in advance!
I hope you enjoyed/are enjoying/will enjoy the longest night of the year. Happy Yalda!
Cheers,
-Mostapha
…
y anyway ;))
Since 2014 i begun to get back into the construction biz for some dozen main reasons, one of them being the highly increased availability of this kind of software "power", and robotics.
first project ended by 1stQ 2015 was focused on the development of a parametric block for construction. (almost sure the first parametric product designed in Uruguay, and probably one of the few first of this kind globally...)
Far from being a complicated model. In fact the standard model is extremely simple, key thing is that is fully parametric...
dimensions, materials, textures, colors... and so on
second key thing is that the main common component of the blocks (an EPS core) is robotically machined...
the blocks are the base of a construction system (oriented mainly - though not restricted only - to residential buildings) that
- is based on digital models, tendentially to be used in parametric models of buidings
- lab tested to prove to be 1.5 times as compression resistant than traditional bricks and blocks. (autoportability up to two stories buildings)
- has recently proved (due to size) to be 300% more efficient than the classic and 200% more efficient than steel frame in (our country official figures)
check it out here
--
https://drive.google.com/file/d/0B1TRxxgF_sEnQnZrTkZGbUx3cmM/view
--
- and it's aimed to be mass produced and handled by robots...
this project ended on 1H 2016
and i filed 4 patents in the process.
3 of them of mechanical devices designed as extensions for a cnc machine i own
and the fourth (
the patent related specifically with the blocks ) included a dozen of innovations (believe me...i have almost 15 yrs in the biz, and are coool stuff...)
along the project I've been working with inventor, even knowing in advance it will lack the kind of features I wanted to program many things... (lisp, VB, etc.... all same species of -prehistoric - animals) to leverage the tool to the sky - and far beyond... -
but was an alternative valid by that time because it allows the implementation of some form of parametric models, had a local representative and some supposedly skilled guys in the neibourhood....
but life is hard... and none of the latter two rendered me any significant help
so I had to take the tour myself...
- mind i never regret to do things that others cant -
and finish what i start
this one was a great project for many figures... and ended with more results than the ones commited to accomplish...
... some more history here ....
then because of a customer who brought a ZHA project ! to quote..., I crossed with rhino, and then met GH again to notice to my great joy and pleasure, in what kind of animal it had developed...
since money talks I'm investing hard on getting up to the expectations, and beyond as i usually do...
and thats how we met..
2017-2018 it's the time frame to build two robots. first one is a prototype to handle the k-nano blocks in the production process, delivery AND at the construction site ( a "smart crane" we nicknamed...)
the other one is the first prototype of robot to assist in the fabrication (smart blocker we called it to be creative ! ;))
then by 2018-2019 i'll be making a "kinda contour crafter" machine to complete the pie :) (you'll be interested on this..)
i guess you already know what all this has to do with GH...
i already have all the components i can imagine to do almost all i ever wanted to do in relation to this set of projects
but in almost a single tool !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
i can design, animate, render, optimize, simulate and even robotic simulate..
so, i have to ask...
is there a chance you might be interested in helping us in some projects we are starting on march and june 2017 (8 and no more than 18 months of duration respectively) ?
sent you a friend request, for the case you might be interested to continue by e-mail...
in any case many thanks for your help and inspiration !
best regards !
long happy marriage, and large figures bank account !
…