stributes structural supports for a uniformly loaded domain using e.g. the internal energy of the loaded domain as fitness. Here the uniformly loaded domain is represented by the trimmed surface. My genomes are the support positions (green crosses), which are restricted to a set of predefined grid points. I’m currently using an (i,j)-coordinate indexing for these grid points (illustrated in the viewport just below) as opposed to a sequential , “one-dimensional” numbering (illustrated in the viewport further down).
(i,j)-indexing systemAltenative, sequential indexing system
The support positions are computed by two gene pools; one governing the i-index, Gene List {i}, and one governing the j-index, Gene List {j}, of each support. The value of slider 0 in Gene List {i} is paired with the value of slider 0 in Gene List {j} etc. and the amount of sliders corresponds to the amount of supports. The screen shot below depicts the slider constellation corresponding to the support distribution depicted above. Unfortunately the j-index represented in the sliders needs remapping as the number of j-indices vary for each i-index (horizontal row of grid points). With the current setup I have 12^6 x 9^6 = 1,6 x 10^12 different genomes. If I were to use the sequential, “one-dimensional” numbering, I would only use one gene pool with sliders ranging from 0 to 76 meaning that remapping could be avoided and thereby having only 76^6 = 1,9 x 10^11 different genomes.
So, my current genome setup causes a bunch of issues related to the Evolutionary Solver: Remapping Changing one of the j-index sliders, will not necessarily change the related support position but it will still facilitate another genome to be calculated by the solver. (This problem could be eliminated by using the sequential, “one-dimensional” numbering)
Switching slider values around If the values of e.g. slider 0 were to be switched around with the values of slider 5, this again would yield a new genome but an identical solution. (This problem cannot be eliminated by using the sequential, “one-dimensional” numbering)
Coincident support positions Two or more supports may be located in the same position. (This problem cannot be eliminated by using the sequential, “one-dimensional” numbering)
I find it impossible to imagine the fictive “fitness landscape” of this problem and not only because of the multidimensional genome characteristic but just as much because of these listed, intertwined peculiarities. I’ve tried running the Simulated Annealing Solver as well, but my experience is that the Evolutionary Solver yields better results. To my awareness, the solver uses some kind of topographical proximity searcher. This is why, I think that the solving process itself benefits more from analysing the (i,j)-index system, in which neighbouring grid points hold more uniform topographical information than the sequential, “one-dimensional” numbering, which might have big ID-numbering gaps between neighbours. Have I understood this correctly?
Cheers…
.
Things have been working swimmingly in many areas of the plugin, but one particular problem has been tough to solve. I have two components that are trying to read/write to the same memory at the same time, causing Rhino exceptions and crashes.
The conflicts appear to be happening between two components -- one is a "Layer Events Listener" that reports essentially what type of layer event just happened. The other is a "Set Layer Visibility" component that toggles the visibility of a list of layers.
The code:
public class LayerTools_LayerEventsListener : GH_Component { /// <summary> /// Initializes a new instance of the LayerTools_LayerListener class. /// </summary> public LayerTools_LayerEventsListener() : base("Layer Events Listener", "Layer Listener", "Get granular information about the layer events happening in the Rhino document.", "Squirrel", "Layer Tools") { }
/// <summary> /// Registers all the input parameters for this component. /// </summary> protected override void RegisterInputParams(GH_Component.GH_InputParamManager pManager) { pManager.AddBooleanParameter("Active", "A", "Set to true to listen to layer events in the Rhino document.", GH_ParamAccess.item, false); pManager.AddTextParameter("Exclusions", "E", "Provide a list of exclusions to stop reading specific events (Added, Deleted, Moved, Renamed, Locked, Visibility, Color, Active).", GH_ParamAccess.list); pManager[1].Optional = true; }
/// <summary> /// Registers all the output parameters for this component. /// </summary> protected override void RegisterOutputParams(GH_Component.GH_OutputParamManager pManager) { pManager.AddBooleanParameter("Initialized", "I", "Whether the listener changed from passive to active.", GH_ParamAccess.item); pManager.AddTextParameter("Document Name", "doc", "Name of the Rhino document that is changing.", GH_ParamAccess.item); pManager.AddTextParameter("Layer Path", "path", "Path of the modifed layer.", GH_ParamAccess.item); pManager.AddIntegerParameter("Layer Index", "ID", "Index of the modified layer.", GH_ParamAccess.item); pManager.AddIntegerParameter("Sort Index", "SID", "Sort index of the modified layer.", GH_ParamAccess.item); pManager.AddTextParameter("Event Type", "T", "Type of the modification.", GH_ParamAccess.item); pManager.AddBooleanParameter("Added", "A", "If the layer has been added.", GH_ParamAccess.item); pManager.AddBooleanParameter("Deleted", "D", "If the layer has been deleted.", GH_ParamAccess.item); pManager.AddBooleanParameter("Moved", "M", "If the layer has been moved.", GH_ParamAccess.item); pManager.AddBooleanParameter("Renamed", "R", "If the layer has been renamed.", GH_ParamAccess.item); pManager.AddBooleanParameter("Locked", "L", "If the layer locked setting has changed.", GH_ParamAccess.item); pManager.AddBooleanParameter("Visibility", "V", "If the layer's visibility has changed.", GH_ParamAccess.item); pManager.AddBooleanParameter("Color", "C", "If the layer's color has changed.", GH_ParamAccess.item); pManager.AddBooleanParameter("Active", "Act", "If the active layer has changed.", GH_ParamAccess.item); }
/// <summary> /// This is the method that actually does the work. /// </summary> /// <param name="DA">The DA object is used to retrieve from inputs and store in outputs.</param> protected override void SolveInstance(IGH_DataAccess DA) { bool active = false; List<string> exclusions = new List<string>();
DA.GetData(0, ref active); DA.GetDataList(1, exclusions);
RhinoDoc thisDoc = null;
bool initialize = false;
string dName = null; string activePath = null; int layerIndex = -1; int sortIndex = -1; string eventType = null; bool added = false; bool deleted = false; bool moved = false; bool renamed = false; bool locked = false; bool visibility = false; bool color = false; bool current = false;
if (active) { thisDoc = RhinoDoc.ActiveDoc;
initialize = (!previouslyActive) ? true : false;
RhinoDoc.LayerTableEvent -= RhinoDoc_LayerTableEvent; RhinoDoc.LayerTableEvent += RhinoDoc_LayerTableEvent; previouslyActive = true;
} else {
RhinoDoc.LayerTableEvent -= RhinoDoc_LayerTableEvent; previouslyActive = false; }
if (ev != null) { dName = ev.Document.Name; layerIndex = ev.LayerIndex; eventType = ev.EventType.ToString();
if (!exclusions.Contains("Active")) { if (ev.EventType.ToString() == "Current") { // active layer has just been changed current = true; }
}
if (!exclusions.Contains("Moved")) { if (ev.EventType.ToString() == "Sorted") { // active layer has just been changed moved = true; }
}
if (!exclusions.Contains("Added")) { if (ev.EventType.ToString() == "Added") { // layer has just been added activePath = ev.NewState.FullPath; added = true; }
}
if (!exclusions.Contains("Active")) { if (ev.EventType.ToString() == "Deleted") { // layer has just been added
deleted = true; } }
if (ev.EventType.ToString() == "Modified") { // layer has been modified activePath = ev.NewState.FullPath;
//skip sortindex eventType = ev.EventType.ToString();
if (ev.OldState != null && ev.NewState != null) { if (!exclusions.Contains("Locked")) { if (ev.OldState.IsLocked != ev.NewState.IsLocked) locked = true;
} if (!exclusions.Contains("Visibility")) { if (ev.OldState.IsVisible != ev.NewState.IsVisible) visibility = true; }
if (!exclusions.Contains("Moved")) { if (ev.OldState.ParentLayerId != ev.NewState.ParentLayerId) moved = true; }
//if (ev.OldState.SortIndex != ev.NewState.SortIndex) moved = true; if (!exclusions.Contains("Renamed")) { if (ev.OldState.Name != ev.NewState.Name) renamed = true; }
if (!exclusions.Contains("Color")) { if (ev.OldState.Color != ev.NewState.Color) color = true; } }
} }
DA.SetData(0, initialize); DA.SetData(1, dName); DA.SetData(2, activePath); DA.SetData(3, layerIndex); DA.SetData(4, sortIndex); DA.SetData(5, eventType); DA.SetData(6, added); DA.SetData(7, deleted); DA.SetData(8, moved); DA.SetData(9, renamed); DA.SetData(10, locked); DA.SetData(11, visibility); DA.SetData(12, color); DA.SetData(13, current);
}
static bool previouslyActive = false; Rhino.DocObjects.Tables.LayerTableEventArgs ev = null;
void RhinoDoc_LayerTableEvent(object sender, Rhino.DocObjects.Tables.LayerTableEventArgs e) { ev = e;this.ExpireSolution(true); }
And for the layer visibility component:
public LayerTools_SetActiveLayer() : base("Set Active Layer", "SetActiveLayer", "Set the active layer in the Rhino document.", "Squirrel", "Layer Tools") { }
/// <summary> /// Registers all the input parameters for this component. /// </summary> protected override void RegisterInputParams(GH_Component.GH_InputParamManager pManager) { pManager.AddBooleanParameter("Active", "A", "Set to true to change the active layer in Rhino.", GH_ParamAccess.item, false); pManager.AddTextParameter("Path", "P", "Full path of the layer to be activated.", GH_ParamAccess.item); }
/// <summary> /// Registers all the output parameters for this component. /// </summary> protected override void RegisterOutputParams(GH_Component.GH_OutputParamManager pManager) { pManager.AddIntegerParameter("Layer ID", "ID", "Index of layer that has been activated.", GH_ParamAccess.item); pManager.AddBooleanParameter("Status", "St", "True when the layer has been activated.", GH_ParamAccess.item); }
/// <summary> /// This is the method that actually does the work. /// </summary> /// <param name="DA">The DA object is used to retrieve from inputs and store in outputs.</param> protected override void SolveInstance(IGH_DataAccess DA) { bool active = false; string path = "";
if (!DA.GetData(0, ref active)) return; if (!DA.GetData(1, ref path)) return;
int layer_index = -1; bool status = false;
if (path != null) {
Rhino.RhinoDoc doc = Rhino.RhinoDoc.ActiveDoc; Rhino.DocObjects.Tables.LayerTable layertable = doc.Layers;
layer_index = layertable.FindByFullPath(path, true);
if (layer_index > 0) { // if exists RhinoDoc.ActiveDoc.Layers.SetCurrentLayerIndex(layer_index, true); status = true; } }
DA.SetData(0, layer_index); DA.SetData(1, status); }
Now originally I was getting exceptions when changing multiple layers' visibility properties, which would cause the Event Listener to fire and try to read the Visibility property before the memory has been released by the Set Layer Visibility component. That led me to add an "Exceptions" input, that would allow me to disable the reading of Visibility events at the source in the Layer Events listener. That helped me manage about 95% of the crashes I was getting, but I still get strange crashes in other event properties, even when that property shouldn't be affected. For instance, I am getting a crash here on the Name property in the event from the delegate function, even though I am only changing Visibility at any one time:
I have a few ideas but they all seem pretty hacky. One is to try to set a flag that is readable by any component in the plugin -- so that the event listener can see if a "set" component is currently running and abort before causing an exception. The other is creating a delay in the event listener, somthing like 200ms, to allow any set components to finish what they are doing before reading the event. Neither seems super ideal.
Any ideas?
Thanks,
Marc
…
of a hack to push it to an android device, and you can't use labels, which is a very bad point!
...
I won't buy an Iphone!
The other is Control OSC. It looks rougher, but it has a lot of advantages to me.
+ Game of Life included!
+ you can use and update labels :))
+ Has a nice muti touch widget unfeatured in touch osc
+ You can script the interface using java script manipulation in gh, stream it to your dropbox and update in one "tap", as follows
Does anyone have experience with scripting interfaces for this software? I'm stuck already. I know nothing of java script to begin with. As you can see I managed to format the labels but the osc message I could not find a way, it stays untouched.
Just in case someone knows better, here are my "objects" (I said that right?). The userXXX are replaced in GH.
{ "name":"userName", "type":"Slider", "x":(xPadding + .11), "y": yPadding, "width":.82, "height":.082, "color":"userColor", "min":userMin, "max":userMax, "ontouchmove" : "var roundedvalue = this.value.toFixed(userFix); LbluserName2.changeValue(roundedvalue)", "onvaluechange": "oscManager.sendOSC('/userName', 'f', this.value.toFixed(userFix))",},{ "name":"LbluserName1", "type":"Label", "x":xPadding, "y": yPadding, "width":.1, "height":.05, "color":"userColor", "value": "userName"},{ "name":"LbluserName2", "type":"Label", "x":xPadding, "y": (yPadding + 0.05), "width":.1, "height":.05, "address":"/userName", "color":"userColor", "value": 0},…
not working, then this can be a limitation of Honeybee, not the Terrain shading mask component.You can authenticate the mask shape by using the Udeuschle panorama generator (I used the following Trento coordinates: lat:46.066667, long:11.116667):
Sketchup has a similar plugin for Trynsys3D terrain shading masks.
I gave a reply on your upper questions in here, in component's release topic, so that it would be useful for others users too.
Actually I tried also to create the mask of the mountain using the topography I imported from Sketchup and the Ladybug Shading Mask II component. In this way the shading effect is well noticeable, but the process of creating the mask from such a complex geometry is very slow.
I can make a component which will automatically generate the topography of the local terrain, for a given latitude/longitude, but you will have to wait some time. I am currently doing some repairing around my house and cottage, and I do not have any spare time.Have in mind that depending on the configuration of you PC, you may not be able to have the terrain radius of up to 100 km. While Terrain Shading Mask component actually creates this terrain, it does not add it to the grasshopper document. In your case the terrain will be added to the grasshopper document which may crash Rhino depending on your PC configuration (for example it crashes Rhino on my PC).…
ries", but it could be changed in the future with nicer and more interesting names.
It's perfectly known that lot of plugins has been released to empower GH panelling capabilities, but usually lightweight and native systems could be required to accomplish specific little (or big) design tasks. In addition to this, the panelling process is a task that let the user to play and learn and practice deeply concepts about surface/meshes topology, list and data trees management, etc. So I though that this could be a perfect starting point for the "Utilities series" in c+GH.
To open this group of c+GH post I will start with something simple that everyone that have used GH has tried sooner or later in his/her learning process: how to panel a surface using standard/built-in GH components only.
Topics that could be covered (aka, problem categories):
Planar panels.
Curved panels.
Mixed solutions: curvature/distortion triggers or limits.
Given a NURBS surface, create a single panelling system that implement one of the categories described for only one kind of panel (triangular, quadrilateral, n-gon). Of course, curved panels are not compatible with triangular shapes, etc, so try to pick a compatible combination.
Further considerations:
The implemented solution should let the user to interact with every panel easily, so the proposed algorithm should track the panellization process avoiding to destroy helpful information/data structures for further modifications in the panelling system.
NURBS and mesh solutions are both allowed.
None, plugin or scripted component allowed.
The cleanest, shorter and less processing-time-expensive solution in every category will be the winner (please, consider using profiler intensively).
Deadline: May 18, 2014.
…
tic systems and iterated function systems.
https://www.food4rhino.com/app/chimpanzee
https://matousstieber.wordpress.com/
#chimpanzee3d
I would appreciate any feedback, suggestions or reports of bugs. Please email me at matous.stieber@outlook.com.
To install:
Delete any previous versions of Chimpanzee you have installed
In Grasshopper, choose File > Special Folders > Components folder > Unblocked the files
Restart Rhino and Grasshopper
Chimpanzee changelog
Aug 31, 2019 - Chimpanzee 0.2.
Update to add 38 new components including hyperchaotic systems, maps and strange attractors. Additional features and options added including exponent input to Mandelbrot Set and Burning Ship.
Nov 11, 2018 - Chimpanzee 0.1
initial release
Further development may include Mandelbulb, Quaternion Julia Set, etc.
…
sando las nuevas tecnologías de la información en la arquitectura para la gestión del conocimiento de sistemas que desarrollen estructuras sustentables, desde los procesos de diseño generativos o algorítmicos. Donde se contempla la P.O.O. (programación orientada a objetos) como nuevo lenguaje de expresión para el arquitecto-diseñador en el siglo XXI.Los talleres están pensados para sigan un hilo conductual en el que al mismo tiempo que se enseña se investiga y experimenta. Por primera vez se contará con diversos miembros de SEED como docentes de forma presencial y por video conferencia, logrando de esta forma acercar a los especialistas que se encuentran en Europa a los asistentes de los talleres sin encarecer los costos.+info:http://www.studioseed.net/ adn-methodology/
Los talleres están dirigidos a personas que tengan o quieran conseguir un perfil alto de innovación, creatividad, flexibilidad: profesionales con actividades de dirección, gerencia, proyectistas, investigadores, así como a estudiantes a partir de 5to semestre en adelante. Cada taller abarca perfiles diversos de profesionales, mientras unos están más orientados a directivos y gerencias, otros más a proyectistas.
LOS TALLERES:FAB DIG I / ITESM – CEM / Estado de México / 20 hrs / 8 – 11 al de diciembre 2011 (En este taller no se aplican descuentos ni becas)PARAMETRIC GREEN HOUSING / Colegio de Arquitectos del estado de Jalisco (Por confirmar Sede) / Guadalajara / 20h + 5h proyecto / 30 enero 2012 al 4 de diciembre 2012FAB DIG II / ITESM – CEM / Estado de México / 30h + 5h proyecto / 8 a 12 febrero 2012TERCERA REVOLUCIÓN INDUSTRIAL: TIC`s + SOSTENIBILIDAD. Procesos y paradigmas emergentes / Querétaro / 20 hrs / 15 al 18 de febrero 2012INTRODUCCIÓN AL DISEÑO GENERATIVO / UAM-azc / DF / 8hrs / 13, 14 de enero (Costo representativo $650, máximo 40 personas, mínimo 15 personas)INTRODUCCIÓN A: SCRIPTING CON GRASSHOPPER ( Python) Y PLUGINS / Estudio SEED México / Estado de México / 30 hrs / 23, 24, 25 febrero y 1,2, 3 de marzo 2012…
Added by SEED studio at 3:30am on November 24, 2011
he plug-in supports intuitive design of paneling concepts as well as rationalize complex geometry into a format suitable for analysis and fabrication. The plug-in is closely integrated with Rhino 7 and is widely used for architectural and other building designers.
Download
The new PanelingTools for the new Rhino 7.2 is now available. You can access Rhino 7 evaluation and upgrades from here…
Documentation
For documentation and examples, please check:
PanelingTools Manual for detailed description of commands and options.
PanelingTools for Grasshopper Manual includes tutorials and description of PT-GH components.
Paneling Scripting page has a listing of paneling methods for RhinoScript.
Paneling Tutorials page has links to video tutorials.
Paneling Short Clips page has short video tutorials that covers the core functionality of PanelingTools.
Paneling Gallery page has users projects with PanelingTools.
Videos
**NEW** PanelingTools Webinar Course - December 2014 learn how Paneling tools works and how best to integrate it into your design process.
Paneling Tools Webinar - February 11, 2011
Paneling Tools Webinar on Vimeo
Feedback
Please tell us what you think and how you are using PanelingTools to help shape future development.
Join the PanelingTools Group in Rhino Forum and post photos, news and discussions. Make sure to tag with keyword “PanelingTools”.
For questions and feedback, contact the developer.
Source: McNeel Wiki
Keshia C. Stich
Grid Paneling Group
…
A repository of generic or complex examples.
Example 01: Attractor Values
ND_001_AttractorValues.gh
Example 02: Curve Values
ND_002_CurveValues.gh
Example 03: Point Attractor
ND_003_PointAttract