mers considering extreme sports reject mainstream retailers and like to check out small stores rather of at chains plus malls. Several smaller retailers discuss trends in sports shoe sales. http://skateszone.com/
Though athletic shoes and sports stores and from doorways retailers have reported somewhat uptick in footwear sales due to the increase in extreme sports, the particular beneficiaries inside the trend are independent surf and skate niche stores.
Some West Coast surf and skate shops stated teenagers and even more youthful Generation Xers are not only rejecting traditional sports, but they're also shunning mainstream retailers and malls meant for smaller niche shops transporting hard-to-come-by brands.
Eddie Miyoshi, district manager at Atomic Garage, a 3-store chain situated in Gardena, Calif., stated the soaring recognition of skateboard footwear has boosted the retailer's total footwear business 20-thirty percent this year, rather of '95.
Skate footwear presently represent 80-90 % of Atomic Garage's shoe sales, while couple of years back, Dr. Martens and Timberland drove the retailer's footwear business.
Like many retailers, Miyoshi pointed to Airwalk since the trend's catalyst.
However, if Airwalk broadened its distribution to larger chains, which are frequently located in malls, only a few skate shoe customers adopted. Rather, many youthful males have switched for your skate shops for additional elusive brands like Etnies, Duffs, and Electricity Footwear by Circus. By refusing to market bigger retailers or sports stores, these brands are increasing their cachet among youthful consumers.
"Kids don't want stuff which have been within the shops,In . Miyoshi added.
Searching ahead, Miyoshi forecasted skate shoe sales will remain strong through spring '97 provided "the [hot] vendors don't auction other [non-particularly shop] retailers."
"Skaters and non-skaters are rebelling against mainstream retailers so on to surf and skate shops for many looks," echoed Mark Richards, co-online sources Val Surf, a 3-store chain situated in North Hollywood, Calif. Soaring sales of skate footwear have driven total footwear receipts up 25 percent this year rather of '95.
"The quantity of that increase might be connected while using exposure of maximum games? I am unsure. [Skate footwear] may also be actually the think about the moment,In . Richards acknowledged. And in relation to getting this right look, youthful customers can be very picky.
"Skateboard footwear is a huge category for people, but we're not able to own the brands, Etnies, Duffs, Electricity and Nice, simply because they won't sell us," stated Mark Anderson, buyer at Chick's Sports, a six-store chain in Covina, Calif. "We have people coming every single day requesting them." Consequently, skate footwear have consistently ongoing to obtain about 5 % of Chick's overall footwear business. http://skateszone.com/the-top-8-best-skateboards-for-beginners-reviews-2017/
Nonetheless, some outdoors, niche sports and sports retailers are noting the growing recognition and coverage of maximum sports will receive a modest impact on footwear sales. Trailrunning footwear and approach/outdoors crosstrainers will be the two groups benefiting the very best inside the recognition. Like the skate shoe business, some retailers realize that styling instead of function frequently drives sales of individuals footwear.
"At this time the merchandise is a lot more visual than function," stated Chet James, gm of Super Jock 'N Jill, Dallas, speaking about trailrunning footwear. Still, James noted the current hype over adventure sports helps draw more customer traffic. "The marketing campaigns and media help bring growing figures of people in, nonetheless they frequently occasions day an issue that increases results on their own account,Inch he conceded.
John Wilkinson, executive vp inside the 85-store chain Track 'N Trail, Eldorado Hillsides, Calif., stated the shop has "seen some activity in approach footwear," but he requested the amount of consumers depend in it commercially sport. And, instead of accelerating total footwear business, Wilkinson speculated elevated sales of approach footwear and trailrunners are gnawing away at traditional hiking shoe and boot volume.
But Dan Bazinet, president of Overland Exchanging, a 34-store chain situated in Westford, Mass., believes the company-new looks have breathed existence for the wilting hiking boot category. "[Approach-type footwear] don't represent the lion's participate the hiking market, nonetheless they have elevated the hiking business and provided us extra sales," Bazinet stated.
He designated Timberland's Treeline Series and Rockport's Leadville line as strong performers. Unsurprisingly, he noted the company-new looks are attractive to youthful consumer base than traditional hikers.
For that month of June, sales of men's hikers were up 49 percent at Overland, rather of June '95, while sales of women's hikers were up 17 % for that month. Bazinet also attributed elevated sales that shops walked inside the hiking business, departing that business for that specialists.
Some retailers draw a good example concerning the hiking boom of two yrs ago combined with the current extreme sport phenomenon. "Plenty of bigger chains will get a specific percent in the industry while [extreme] sports remain a fad because they are selling cost-point type gear," described Steven Carre, assistant hard goods buyer at Adventure 16, a six-store chain situated in Hillcrest.
"However individuals [true enthusiasts] will say `we need real gear' and may shown up at us. That will help us after a while. What Size Skateboard good for an 3 4 5 6 7 8 9 10 11 12 13 14 year old
…
ne – power of the many è un corso advanced level che studia la produzione di effetti complessi a partire dalla modellazione di comportamenti semplici su un insieme strutturato con un numero alto di elementi. Attraverso un approccio generico e scaleless sarà possibile affrontare la tematica generale su più fronti e in una molteplicità di declinazioni possibili. Il corso è rivolto a chi,indipendentemente dal proprio background (urbanistica, architettura, ingegneria, design, arte o altro) già possiede una esperienza di base con Rhinoceros e Grasshopper, e desidera sviluppare aspetti di gestione avanzata del flusso di articolato di informazioni attraverso una strategia guidata basata su esempi pratici e sull’implementazione di un progetto personale sul tema generale del “field behaviour”. Sarà trattato anche l’utilizzo di alcuni plug-ins quali gHowl e WeaverBird. Il numero dei partecipanti è fissato a un massimo di 20 per offrire un tutoraggio proficuo ed una effettiva esperienza di learning ad ogni iscritto.
[.] Temi:
teoria
. complessità, emergence, effetti di campo (field behaviour), sensibilità, efficienza multiperformance
tecnica
. dati:gestione e manipolazione avanzata del data tree, streaming e visualizzazione; transizione, blending e modulazione delle geometrie; generazione e controllo multiperformance di popolazioni di componenti; attrattori, drivers e tecniche di modulazione avanzate; uso delle mesh con WeaverBird; ottimizzazione con Galapagos
[.] Dettagli :
Tutors: Alessio Erioli + Andrea Graziano – Co-de-iT
Si richiede esperienza di base nella modellazione in Rhino (equivalente a Rhino training Level 1, il Level 2 è gradito – la documentazione per il training è disponibile gratuitamente all’indirizzo: http://download.rhino3d.com/download.asp?id=Rhino4Training&language=it) e nell’uso di Grasshopper (la suddivisione di una superficie NURBS in componenti tramite isotrim è data come base assodata)
. luogo:
IreCoop – via Vasco De Gama 27 _ Firenze
. durata:
25-27 febbraio 2010 – 3 giornate consecutive _ orario 9:00 – 18:00
. costo:
professionisti – 450.00 € studenti – 280.00 €
. note:
scadenza iscrizioni: 20 febbraio 2010 il corso sarà attivato con un numero minimo di 15 iscritti al termine sarà rilasciato un attestato di frequenza gli iscritti dovrano venire muniti dei propri laptop con software installato. una versione free per 30 giorni è disponibile sul sito www.rhino3d.com
. contatti:
iscrizioni + info alloggi: www.irecooptoscana.it (Cosa offriamo > formazione > altri corsi)
info sul corso: info@co-de-it.com…
as one element.
Thank you
Comment by karamba on October 7, 2014 at 11:27pm
Hello Patricio, divide the beams in such a way that each boundary vertex of the shell becomes an endpoint of a beam segment.
Best, Clemens
Comment by Llordella Patricio on October 8, 2014 at 8:30amDelete Comment
Hi Clemens,
I did what you suggested but now assemble element doesn´t work properly. Could you please tell me how to fix it? Thanks in advance, Patricio
8-10-14losa%20cadena.gh
Comment by karamba on October 8, 2014 at 11:59am
Hi Patricio, if you flatten the 'Elem'-input at the 'Assemble'-component the definition works. The triangular shell elements have linear displacement interpolations whereas the beam deflections are exact. In order to get correct results you should refine the shell mesh.
Best, Clemens
Comment by Llordella Patricio on October 9, 2014 at 8:35amDelete Comment
Hello, succeeds in creating the mesh to the slab, and built the beam segment, but when I see the deformations are not expected because the beam is deformed as the slab.
Thanks for the help
PS: maybe I'm using the program for a type of structure that is not the most appropriate, as I saw in the examples of other structures. But this type of structure is that students taught
best regards
Patricio
9-10-14%20Example%201.gh
Comment by karamba on October 9, 2014 at 10:46am
You could use the 'Mesh Edges'-component to retrieve the naked edges and turn them into beams - see attached file:91014Example1_cp.gh
Best regards,
Clemens
Comment by Llordella Patricio on October 15, 2014 at 3:41pmDelete Comment
Dear clemens
I was doing a rough estimate of the deformation, and I can not achieve the same result with Karamba. When I make a rough estimate of the result with Karamba beams and mine are very similar, I think the problem is when I connect the shell, because there are no similar results.
I sent the GH file, and an image of the calculation
The structure is concrete The result I get is 0.58cm
thank youPatricio
15-10-14%20Example.gh
Comment by karamba yesterday
Dear Patricio,
try to increase the number of shell elements. As mentioned in the manual they are linear elements. A mesh that is too coarse leads to a response which is stiffer than the real structure.
Best,
Clemens
…
will work slightly different from before. Sorry about breaking this, but it proved impossible to improve the selection logic with the fairly ambiguous notation that was implemented already.
Not every change is breaking though and I hope that most simple matching rules will work as before. There will be a McNeel webinar on Wednesday the 6th of November where I discuss the new selection rules (as well as path mapping syntax and relative offsets within one or more data trees). This will be a pretty hard-core webinar aimed at expert users. The event will be recorded so you can always go and watch it later. I figured I'd briefly explain the new selection rules on Ning before I release the update though.
-------------------------------------------------------------------------------
Imagine we have the following data tree, containing a bunch of textual characters:
{0;0} = [a,e,i,o,u,y] {0;1} = [ä,ë,ê,ï,î,ö,ô,õ,ü,û,ÿ,ý] {1;0} = [b,c,d,f,g,h,j,k,l,m,n,p,q,r,s,t,v,w,x,z] {1;1} = [ç,ĉ,č,ĝ,ř,š,ş,ž]
There are a total of four branches {0;0}, {0;1}, {1;0} and {1;1}. The first branch contains all the vowels that are part of the standard English alphabet. The second branch contains all non-standard vowels and branches three and four contain the standard and non-standard consonants respectively.
So what if we want to select from this tree only the standard vowels? Basically include everything in the first branch and disregard everything else. We can use the [Tree Split] component with a selection rule to achieve this:
{0;0}
This selection rule hard-codes the number zero in both tree path locations. It doesn't define an item index rule, so all items in {0;0} will be selected.
If we want all the vowels (both standard and non-standard), then we have several options:
{0;?} = select all branches that start with 0
{0;(0,1)} = select all branches that start with 0 and end in either 0 or 1
{0;(0 to 1)} = ......................................... and end in the range 0 to 1.
Conversely, selecting all standard vowels and consonants while disregarding all non-standard character can be achieved with rules as follows:
{?;0}
{(0,1);0}
{(0 to 1);0}
It is also possible to select items from each branch in addition to limiting the selection to specific branches. In this case another rule stated in square brackets needs to be appended:
{0;?}[0 to 2]
The above rule will select the first three vowels from the standard and the non-standard lists.
Basically, rules work in a very consistent way, but there are some syntax conventions you need to know. The first thing to realize is that every individual piece of data in a data-tree can be uniquely and unambiguously identified by a collection of integers. One integer describes its index within the branch and the others are used to identify the branch within the tree. As a result a rule for selection items always looks the same:
{A;B;C;...;Z}[i] where A, B, C, Z and i represent rules.
It's very similar to the Path Mapper syntax except it uses square brackets instead of parenthesis for the index (the Path Mapper will follow suit soon, but that won't be a breaking change). You always have to define the path selector rule in between curly brackets. You can supply any number of rules as long as you separate them with semi-colons.
The index rule is optional, but -when provided- it has to be encased in square brackets after the path selection rule(s).
The following rule notations are allowed:
* Any number of integers in a path
? Any single integer
6 Any specific integer
!6 Anything except a specific integer
(2,6,7) Any one of the specific integers in this group.
!(2,6,7) Anything except one of the integers in this group.
(2 to 20) Any integer in this range (including both 2 and 20).
!(2 to 20) Any integer outside this range.
(0,2,...) Any integer part of this infinite sequence. Sequences have to be at least two integers long, and every subsequent integer has to be bigger than the previous one (sorry, that may be a temporary limitation, don't know yet).
(0,2,...,48) Any integer part of this finite sequence. You can optionally provide a single sequence limit after the three dots.
!(3,5,...) Any integer not part of this infinite sequence. The sequence doesn't extend to the left, only towards the right. So this rule would select the numbers 0, 1, 2, 4, 6, 8, 10, 12 and all remaining even numbers.
!(7,10,21,...,425) Any integer not part of this finite sequence.
Furthermore, it is possible to combine two or more rules using the boolean and/or operators. If you want to select the first five items in every list of a datatree and also the items 7, 12 and 42, then the selection rule would look as follows:
{*}[(0 to 4) or (6,11,41)]
The asterisk allows you to include all branches, no matter what their paths looks like.
It is at present not possible to use the parenthesis to define rule precedence, rules are always evaluated from left to right. It is at present also not possible to use negative integers to identify items from the end of a list.
If you want to know more, join the Webinar on Wednesday!
--
David Rutten
david@mcneel.com
Seattle, WA…
Added by David Rutten at 8:57pm on November 3, 2013
quinto anno consecutivo di attivazione. Plug it² fornirà ai partecipanti un’effettiva padronanza delle più avanzate tecniche di modellazione digitale, approfondendo le metodologie della modellazione algoritmica e parametrica nel campo dell'architettura e del design del prodotto. Il corso è rivolto a studenti e professionisti dei settori della progettazione architettonica, design, nautica, moda e gioielleria, con esperienza minima nel disegno CAD bidimensionale (acquisita su qualsiasi piattaforma software) e si articolerà in lezioni teoriche frontali ed esercitazioni guidate. L'esperienza maturata attraverso didattica, pubblicazioni e progettazione d'avanguardia ci ha consentito di sviluppare un metodo efficace che non si limita al solo studio del software ma approfondisce gli argomenti teorici legati al controllo delle geometrie complesse.
INFO ED ISCRIZIONI: http://www.arturotedeschi.com/wordpress/?page_id=7119…
quinto anno consecutivo di attivazione. Plug it² fornirà ai partecipanti un’effettiva padronanza delle più avanzate tecniche di modellazione digitale, approfondendo le metodologie della modellazione algoritmica e parametrica nel campo dell'architettura e del design del prodotto. Il corso è rivolto a studenti e professionisti dei settori della progettazione architettonica, design, nautica, moda e gioielleria, con esperienza minima nel disegno CAD bidimensionale (acquisita su qualsiasi piattaforma software) e si articolerà in lezioni teoriche frontali ed esercitazioni guidate. L'esperienza maturata attraverso didattica, pubblicazioni e progettazione d'avanguardia ci ha consentito di sviluppare un metodo efficace che non si limita al solo studio del software ma approfondisce gli argomenti teorici legati al controllo delle geometrie complesse.
INFO ED ISCRIZIONI: http://www.arturotedeschi.com/wordpress/?page_id=7119…
ystem to support it from the back.
ELEVATIONPLAN
What I need to do is create a mesh network that is composed of straight segmented pieces. To start, I contoured the surface at 500mm segments in the X and Y axis, getting a mesh grid [below]
Then, I wrote a simple grasshopper script to segment the contour lines, but when I run it, the segments in the X direction and the Y direction do not intersect like I need them to.
I understand why this happened and I understand what I need to do (in concept) but I can't seem to figure out how to implement it.
I'm pretty sure that I need to take the original contours and find the intersecting points and include it in my set of points from DivLength command. My problem is that in the list, the numbers get all jostled up and when I Pline the list of points, it goes a bit crazy. My questions are:
1. Is this the best method of going about this process of creating the segmented mesh?
2. How do I reassemble the list of the two point groups I added?
Thanks in advance!
Best,
Issac
…
stributes structural supports for a uniformly loaded domain using e.g. the internal energy of the loaded domain as fitness. Here the uniformly loaded domain is represented by the trimmed surface. My genomes are the support positions (green crosses), which are restricted to a set of predefined grid points. I’m currently using an (i,j)-coordinate indexing for these grid points (illustrated in the viewport just below) as opposed to a sequential , “one-dimensional” numbering (illustrated in the viewport further down).
(i,j)-indexing systemAltenative, sequential indexing system
The support positions are computed by two gene pools; one governing the i-index, Gene List {i}, and one governing the j-index, Gene List {j}, of each support. The value of slider 0 in Gene List {i} is paired with the value of slider 0 in Gene List {j} etc. and the amount of sliders corresponds to the amount of supports. The screen shot below depicts the slider constellation corresponding to the support distribution depicted above. Unfortunately the j-index represented in the sliders needs remapping as the number of j-indices vary for each i-index (horizontal row of grid points). With the current setup I have 12^6 x 9^6 = 1,6 x 10^12 different genomes. If I were to use the sequential, “one-dimensional” numbering, I would only use one gene pool with sliders ranging from 0 to 76 meaning that remapping could be avoided and thereby having only 76^6 = 1,9 x 10^11 different genomes.
So, my current genome setup causes a bunch of issues related to the Evolutionary Solver: Remapping Changing one of the j-index sliders, will not necessarily change the related support position but it will still facilitate another genome to be calculated by the solver. (This problem could be eliminated by using the sequential, “one-dimensional” numbering)
Switching slider values around If the values of e.g. slider 0 were to be switched around with the values of slider 5, this again would yield a new genome but an identical solution. (This problem cannot be eliminated by using the sequential, “one-dimensional” numbering)
Coincident support positions Two or more supports may be located in the same position. (This problem cannot be eliminated by using the sequential, “one-dimensional” numbering)
I find it impossible to imagine the fictive “fitness landscape” of this problem and not only because of the multidimensional genome characteristic but just as much because of these listed, intertwined peculiarities. I’ve tried running the Simulated Annealing Solver as well, but my experience is that the Evolutionary Solver yields better results. To my awareness, the solver uses some kind of topographical proximity searcher. This is why, I think that the solving process itself benefits more from analysing the (i,j)-index system, in which neighbouring grid points hold more uniform topographical information than the sequential, “one-dimensional” numbering, which might have big ID-numbering gaps between neighbours. Have I understood this correctly?
Cheers…
, Engineer and Researcher from France with broad programming experience. He is the author of the City in 3D Rhinoceros plugin for creation of buildings according to geojson file and with real elevation. Guillaume already created a new component: "Address to Location". It enables getting latitude and longitude values for the given address:
2) Support of Bathymetry data: automatic creation of underwater (sea/river/lake floor) terrain. This feature is now available through new source_ input of the "Terrain generator" component. Here is an example of terrain of the Loihi underwater volcano, of the coast of Hawaii:
3) A new terrain source has been added: ALOS World 3D 30m. ALOS is a Japanese global terrain data. Gismo "Terrain Generator" component has been using SRTM 30m terrain data, which hasn't been global and was limited to -56 to +60 latitude range. With this addition, it is possible to switch between SRTM and ALOS World 3D 30m models with the use of source_ input.
4) 9 new components have been added:
"Address To Location" - finds latitude and longitude coordinates for the given address.
"XY To Location" - finds latitude and longitude coordinates for the given Rhino XY coordinates. "Location To XY" - vice versa from the previous component: finds Rhino XY coordinates for the given latitude longitude coordinates. "Z To Elevation" - finds elevation for particular Rhino point. "Rhino text to number" - convert numeric text from Rhino to grasshopper number. "Rhino unit to meters" - convert Rhino units to meters. "Deconstruct location" - deconstructs .epw location. "New Component Example" - this component explains how to make a new Gismo component, in case you are interested to make one. We welcome new developers, even if you contribute a single component to Gismo! "Support Gismo" - gives some suggestions on how to make Gismo better, how to improve it and support it.
5) Ladybug "Terrain Generator" component now supports all units, not only Meters. So any Gismo example file which uses this component, can now use Rhino units other than Meters as well. Thank you Antonello Di Nunzio for making this happen!!
Basically just forget about this yellow panel:
This panel is not valid anymore, so just use any unit you want.
6) A number of bugs have been fixed, reported in topics for the last couple of weeks. We would like to thank members in the community who invested their time in testing, finding these bugs and reporting them: Rafat Ahmed, Peter Zatko, Mathieu Venot, Abraham Yezioro, Rafael Alonso. Thank you guys!!! Apologies if we forgot to mention someone.
The version 0.0.2 can be downloaded from here:
https://github.com/stgeorges/gismo/zipball/master
And example files from here:
https://github.com/stgeorges/gismo/tree/master/examples
Any new suggestions, testing and bug reports are welcome!!…
Added by djordje to Gismo at 5:13pm on March 1, 2017