ifically: I have a 100' vertical plane lofted between curved top and bottom profiles. I contour it every 8' (normal direction is Z, giving me 13 horizontal curves). I use Divide Curve to divide each contour into 10 segments. The "Points" output of Divide Curve now yields 13 branches with 11 items each, corresponding to 13 contours with 11 points from the left end of the curve to its right.
I now want to string "vertical" lines, and connect all the 2nd items in each branch together, all the 3rd items, etc... in order to make a polyline that travels between each 2nd point or 3rd point. i don't want to use Cull Pattern/Nth/Index because the number of subdivisions could change (11 could become 20, etc).
How do I connect the Nth item of each branch in this tree? Moreover, how do I connect all values in a branch with their corresponding values in all other branches?
Thanks for any replies,
Richman Neumann
Solomon Cordwell Buenz Architects
…
main attention is set on easy to handle interface , which should be used at a early stage of conceptual design to respond to external and internal influences in a intelligent and sustainable way.
Participants will use the software Grasshopper as a parametric modeling plug-in for Rhino. The usage of this graphical algorithm editor tightly integrated with Rhino’s 3-D modeling tools open up the possibility to construct highly parametrical complex models. To generate this complexity we will use live linkages to several programs listed below:
• Autodesk Ecotect Analysis and Radiance via GECO
• Processing, Excel or Open Office via gHowl
• FEA software GSA via SSI
In this 3 intense days, the participants should learn the workflow of the plug-ins with the help of examples and get an overview of the different software’s, there possibilities for evaluating the performance of a design or the usage of additional tools to be not chained to a single system .
(e.g. parametrical accentuation, parametrical formation, parametrical reaction)
TIME AND LOCATION
27th – 29th September 2010Leopold-Franzens university innsbruck/austria
Technik Campus | ICT - building
Technikerstraße 21a
A - 6020 Innsbruck | Austria
47°15’50.71”N 11°20’43.45”E
detailed program as pdf-version
FOR WHOM
All levels are welcome (students & professionals)
The only requirement is knowledge of Rhino and Basic Grasshopper.
You will need a level which corresponds to the Grasshopper Primer course outline.
FEES
21 hours
professionals: 395€
students (bachelor/master): 250€.
REGISTRATION
please send a email to to.from.uto@gmail.com attached with following information :
Last Name
First Name
Date of Birth
Nationality
Email Address
Current Address
Profession or proof of student status
After submitting you will receive an email with a PayPal link to complete registration.…
ne – power of the many è un corso advanced level che studia la produzione di effetti complessi a partire dalla modellazione di comportamenti semplici su un insieme strutturato con un numero alto di elementi. Attraverso un approccio generico e scaleless sarà possibile affrontare la tematica generale su più fronti e in una molteplicità di declinazioni possibili. Il corso è rivolto a chi,indipendentemente dal proprio background (urbanistica, architettura, ingegneria, design, arte o altro) già possiede una esperienza di base con Rhinoceros e Grasshopper, e desidera sviluppare aspetti di gestione avanzata del flusso di articolato di informazioni attraverso una strategia guidata basata su esempi pratici e sull’implementazione di un progetto personale sul tema generale del “field behaviour”. Sarà trattato anche l’utilizzo di alcuni plug-ins quali gHowl e WeaverBird. Il numero dei partecipanti è fissato a un massimo di 20 per offrire un tutoraggio proficuo ed una effettiva esperienza di learning ad ogni iscritto.
[.] Temi:
teoria
. complessità, emergence, effetti di campo (field behaviour), sensibilità, efficienza multiperformance
tecnica
. dati:gestione e manipolazione avanzata del data tree, streaming e visualizzazione; transizione, blending e modulazione delle geometrie; generazione e controllo multiperformance di popolazioni di componenti; attrattori, drivers e tecniche di modulazione avanzate; uso delle mesh con WeaverBird; ottimizzazione con Galapagos
[.] Dettagli :
Tutors: Alessio Erioli + Andrea Graziano – Co-de-iT
Si richiede esperienza di base nella modellazione in Rhino (equivalente a Rhino training Level 1, il Level 2 è gradito – la documentazione per il training è disponibile gratuitamente all’indirizzo: http://download.rhino3d.com/download.asp?id=Rhino4Training&language=it) e nell’uso di Grasshopper (la suddivisione di una superficie NURBS in componenti tramite isotrim è data come base assodata)
. luogo:
IreCoop – via Vasco De Gama 27 _ Firenze
. durata:
25-27 febbraio 2010 – 3 giornate consecutive _ orario 9:00 – 18:00
. costo:
professionisti – 450.00 € studenti – 280.00 €
. note:
scadenza iscrizioni: 20 febbraio 2010 il corso sarà attivato con un numero minimo di 15 iscritti al termine sarà rilasciato un attestato di frequenza gli iscritti dovrano venire muniti dei propri laptop con software installato. una versione free per 30 giorni è disponibile sul sito www.rhino3d.com
. contatti:
iscrizioni + info alloggi: www.irecooptoscana.it (Cosa offriamo > formazione > altri corsi)
info sul corso: info@co-de-it.com…
the use of digital technologies as architectural design tools. The workshop " Computer Aided Design: parametric design and digital fabrication " aims to do some introductory teaching in the use of some of these tools.
The workshop will focus on the use of computational models of parametric behavior for generating architectural forms. The generative capacity of these models it will be tested in the development of designs defined by repetitive non-standard components, based on the parametric control of its variations and series differentiations. This process will be developed by the use of a three-dimensional modeling software - Rhinoceros, associated with an application for visual programming - Grasshopper.
The last day of the workshop is dedicated to the use of digital manufacturing tools in architecture. Part of the work will take place at the facilities of the Institute of Design of Guimarães (IDEGUI) providing for the use of their laboratories and manufacturing CNC machines (computer numerically controlled).
At the end of the workshop, it is intended the students to understand that the use of digital technologies in architecture can overcome representational functions, and their integration in the design conception, analysis and construction enriches the methodology of project development.
Terms & Participants
The workshop will take place at the School of Architecture of the University of Minho (Campus Azurém, Guimarães) and the Institute of Design of Guimarães (Couros, Guimarães).
The workshop is pointed at students who attend the 3rd year and 4th year from MiArq, EAUM.
The maximum acceptance is 20 students and a minimum of 10 students.
Deadline for entries is April 11 and must be performed by eaum.pac@gmail.com.
Program summary :
Day 23 April 14 -20h
Introduction to 3D modeling in Rhinoceros. Regular geometries, ruled surfaces and NURBS surfaces.
Day 30 April 14 -20h
Parametric design in architecture. Introduction to methods of visual programming.
May 1, 9 -13h 14 -18h
Development of a design idea by the use visual programming processes in Grasshopper.
May 2, 9 -13h 14 -18h
Introduction to methods of digital fabrication. Manufacture physical models of the proposals made.
It is expected that this meeting will take place in the IDEGUI labs.
team:
Bruno Figueiredo ( Lecturer, EAUM )
Paulo Sousa ( PhD candidate , EAUM )
Nuno Cruz ( Invited Lecturer , EAUM )
Cláudia Alvares ( 5th year MiArq student , EAUM )
Javier Bono ( 4th year MiArq student, EAUM )
João Amaro ( 5th year MiArq student, EAUM )…
is means both E+ and Daylight simulations share the same lighting schedule. So I assume their results should be more or less similar or not that different, even though there might be some difference in their calculation methods.
But, having tried many times, the result generated by the "Honeybee_Daysim Electrical Lighting Use" is usually much less than that generated by the "Honeybee_Read EP Result" (e.g. 160.5 kwh vs 369.425 kwh as in the current parameter).
In addition, in "Honeybee_Lighting control Recipe", default parameters (lightingPower = 250, lightingSetpoint = 300, ballastLossFactor = 20, standbyPower = 3, delayTime = 5) were used in the current case except "control type" - [5] Always on during active occupancy hours with auto dimming.
In short, both E+ and Daylight simulations have already shared the same lighting schedule. As for Control type and Lighting Setpoint, they are only required in daylight simulation.
Best,
Ding…
diamond" schema for clarity.
See these yellow spheres? These are attractors (as many as you like) working in either push or pull mode. You can remap their "influence" at will (min/max) or use some freaky random result (for freaks).
Now comes the pain: see these blue dots? These are the ex black dots that are "shifted along" the surface (in fact brep) according ... well ... some sort of complex logic based on the attractors "influence" on them (explanations later on). The main puzzle here with regard the "shift" is to use the fastest method imaginable in order to enjoy some real-time response.
But forget how these things work > the fact is that we have a NEW data tree of points on the brep (meaning: respect holes if you like so etc etc) due to the attractors and then ... well ... we can combine them with any pattern imaginable.
Bad news: only code is used for all that freaky stuff that are actually 2 separated C#: the first does the "shifting" (you can "anchor" points of interest [say at perimeter etc] as well) and the other does a variety of things related with "patterns".
Is this what you want? (forget the hexagons ... stick to the grid deformation)…
mple problem.
Imagine you're dividing a space (100m²) into two rooms, one of which (room A) should be 60m², the other (room B) 40m². Now it follows that the sum of both rooms must always add up to 100m². And if you make one room smaller by 5m², the other one gets bigger by 5m².
The simplest expression that would convert room areas into a fitness value is, I think:
Abs(A - 40) + Abs(B - 60)
or, in English, the sum total of the discrepancies between the actual areas and the desired areas.
If the rooms are both 50m² we get a fitness of:
Abs(50-40) + Abs(50-60) = 20
If room A equals 10m² and room B equals 90m², we get:
Abs(10-40) + Abs(90-60) = 60
If both rooms are exactly right, we get:
Abs(40-40) + Abs(60-60) = 0
So the point here is to minimize fitness, and once the fitness has reached zero we know we're home free.
But this is a very straightforward case. What if we're trying to optimize a problem, while knowing there's no way on Earth we'll be able to solve all constraints? This is after all what Evolutionary solvers are good at. So what if the problem is not as clear cut?
This time try to imagine we want every room to be 50m², but all the rooms are too small. Let's write down three cases like before:
(Room A = 30m², Room B = 40m²)
Abs(30 - 50) + Abs(40 - 50) = 30
(Room A = 35m², Room B = 35m²)
Abs(35 - 50) + Abs(35 - 50) = 30
(Room A = 25m², Room B = 45m²)
Abs(25 - 50) + Abs(45 - 50) = 30
Holy Crap! They're all the same! Well this is no good, it's like three bald men fighting over a comb. Even though all solutions fail to meet constraints, they certainly shouldn't all be equally fit. Let's assume for the time being we'd rather have both rooms fail to meet demands in equal amounts instead of one room being ok-ish and the other being way off. How can we add this assumption to the fitness function?
Basically we need to exaggerate large departures from the ideal and trivialize small departures. Our naive fitness function was linear, our new and improved fitness function must be non-linear. The simplest non-linear function is the parabola (x²). So let's see where that gets us.
Abs(30 - 50)² + Abs(40 - 50)² = 500
Abs(35 - 50)² + Abs(35 - 50)² = 450
Abs(25 - 50)² + Abs(45 - 50)² = 650
Phew... The case where both room fail to meet demands equally has the lowest value (and thus the highest fitness) whereas the most extreme discrepancy has the highest value (and thus the lowest fitness).
This approach is called Least Squares fitting and it's one of the most common fitting algorithms in statistics.
Whether you decide to weigh your competing factors equally or differently, and whether you decide to treat deviations linearly or non-linearly is entirely up to you. It requires you have a decent understanding of the problem at hand and also a decent understanding of the mathematical behaviour of the fitness function.
--
David Rutten
david@mcneel.com
Poprad, Slovakia…
Added by David Rutten at 6:16am on February 25, 2011
en la práctica de nuevos métodos de diseño y fabricación utilizando herramientas digitales. Estos procedimientos emergentes están cambiando radicalmente la manera en que nos aproximamos al proceso de diseño en términos de concepción y producción. Los participantes serán introducidos en el uso de softwares de modelado 2d y 3d para la generación de geometrías que serán posteriormente mecanizadas in situ en una máquina de control numérico CNC de 3 ejes.
¡AL FINAL DEL CURSO TE LLEVAS TU LÁMPARA A CASA!
Profesores: Equipo MEDIODESIGN* + TOOLINGROUP*
*Official Rhino Trainners. Acreditación otorgada por McNeel, desarrolladores del software Rhinoceros.
Lugar: Mediodesign. Pallars 85-91 5-2 BCN
Duración: 16 / 20 horas
Fecha: sábado 9 / domingo 10 julio de 2011
Horario: de 10h a 14h / de 16h a 20h
Plazas: 20 participantes
REQUISITOS
< Dirigido a estudiantes y profesionales de la arquitectura, diseño y profesiones afines.
< Ordenador portátil.
< Softwares instalados. En el momento de la inscripción, los participantes recibirán las instrucciones para la descarga e instalación de versiones gratuitas (trials) de los softwares.
CONTENIDOS
< Introducción al diseño avanzado y la fabricación digital.
< Entorno Rhinoceros y sus plug-ins.
< Herramientas y estrategias de trabajo CNC.
< Materiales y sus características.
< Planteamiento del ejercicio: diseño de una luminaria
< Desarrollo del archivo de RhinoCam para el mecanizado CNC.
< Mecanizado y post-producción.
< Entrega de propuestas: Presentación en formato digital del proceso de diseño y fabricación (pdf, powerpoint, etc…) y del prototipo de luminaria realizado.
INSCRIPCIONES
Precio: 199 € Materiales incluidos.
Forma de pago: mediante transferencia bancaria.
Límite fecha de inscripción: lunes 4 de julio 2011
Se otorgará certificado de asistencia. …
greatly appreciate it!!
You can write the number of the question and write your answer next to it, example:
1) a
2) c
3) a) Washington University in St. Louis
4) 2 weeks (1week+1week shipping)
5) 130
6) b
7) b
The survey questions are as follows:
1)
Did you 3D print before?
5)
How much did it cost (in dollars)?
a.
Yes, for a school project
a.
Between 20 & 50
b.
Yes, for a personal project
b.
Between 50 & 80
c.
Between 80 & 120
2)
Print size
d.
Please specify if otherwise: _____ dollars
a.
Between 2 & 6 cubic inches
b.
Between 6 & 12 cubic inches
6)
Do you think the price was expensive?
c.
Between 12 & 20 cubic inches
a.
Not at all
d.
Please specify if otherwise: ____cubic inches
b.
A little bit expensive
c.
Very expensive
3)
Where did you print your object?
a.
School
7)
Were you satisfied with the printed object?
b.
Outside school: _________________
a.
Yes, it was a great print without problems
b.
Not bad, some issues
4)
How long did it take to print?
c.
I was not satisfied, very bad quality
a.
___ days
b.
___ weeks
Thank you very much to all!!
PS: If you did many 3D prints, you can post multiple answers.
Wassef…
egin working on a design, we first have to systematically examine the resources and restrictions which, on the one hand, make every design project possible and, on the other hand, also define and delimit it. Knowing what we have to work with enables us to explore its boundaries and at the same time to venture beyond those boundaries. This is our studio’s sphere of action; our projects emerge as a critical reflection of the discipline of architecture, in its essence, on fundamental concepts, their general form, and their underlying media and processes. The goal of our work is to master a variety of forms of the architectural repertoire of the 20th century, but especially to develop and expand this repertoire, as has been happening in the past 20 years. The goal of this workshop is to introduce a series of these techniques and expertises and to apply the knowledge transfer on a given site in Timisoara. GUESTS: STUDIO ZAHA HADID VIENNA: http://www1.uni-ak.ac.at/architektur/ https://www.facebook.com/StudioHadidVienna Ass. Dipl.-Ing.MArch. AA Dist. Robert NEUMAYR-BEELITZ - lecturer/critic http://www.unsquare.at/ AProf. Mag.arch. Mag.theol. Johannes TRAUPMANN - critic http://www.pxt.at/ Univ.-Ass. Dipl.-Ing. Jens Erik MEHLAN - critic http://moh-architecture.com/ Univ.Stud.Ass. Daniel BOLOJAN - tutor - Grasshopper http://nonstandardstudio.wordpress.com/ Univ.Stud.Ass. Bogdan ZAHA - tutor - Maya http://bogdanzaha.tumblr.com/ LOCAL: Prof.Dr.Arh.Urb.Conf. Florin MACHEDON - critic (BUC)
more information on https://encodedfields.wordpress.com/…