hopper no requiere de conocimientos de programación o scripting para permitir al diseñador trabajar de forma generativa y paramétrica. No son necesarios conocimientos previos de Grasshopper pero sí de Rhino a nivel básico.
Controlmad es Centro Formador Autorizado Rhinoceros y Rhino fab Studio.
Nuestros profesores son Instructores Autorizados Rhinoceros con experiencia universitaria, nacional e internacional.
El curso y los ejercicios a desarrollar están enfocados a diseñadores, arquitectos, ingenieros y estudiantes.
En este curso introductorio el alumno se familiarizará con términos básicos de la estructura de Grasshopper, como “listas de datos”, “dominios”, “estructuras en árbol”, etc.
Es un curso de 18 horas, con el que se pretende entrar en la lógica de trabajo de Grasshopper mediante diversos ejercicios, de forma que el alumno sea capaz posteriormente de desarrollar sus propias gramáticas, con la confianza que da comprender los términos básicos de programación sobre los que se apoya todo el sistema de trabajo de Grasshopper.Para este curso no son necesarios conocimientos previos de Grasshopper, pero sí de Rhino (a nivel básico).
También se vincula el programa con la impresión 3D aprendiendo a exportar archivos desde Grasshopper con los requisitos mínimos de impresión 3D. Se realizará una demo de impresión en el aula.
El primer día del curso se le facilita al alumno un manual-tutorial con los ejercicios a realizar, en PDF.
A la finalización del curso, y siempre que el alumno haya asistido al 80% de las clases, se le otorgará un diploma oficial acreditativo del curso.
Fechas: 5, 6, 12 y 13 de marzo
Horario: sábado y domingo 16 - 20,30h (Madrid, CET)
Lugar: Sesiones On-line en directo a través de nuestra plataforma online.controlmad.com
…
creating the structural frame, finding the endpoints, linking these endpoints with curves and afterwards lofting the surfaces between the curves.
The results were quite nice, however, the procedure is very time consuming and inefficient. There is just too much copy-pasting involved.
(see attached file: "Old Attempts.zip" )
Mesh relaxation:
I have later on used Daniel Piker's tutorials on Mesh Relaxation and realized that this might be the way to go.
The link to these online tutorials on wewanttolearn.net is:
https://wewanttolearn.wordpress.com/2011/10/22/mesh-relaxation-kangaroo-tutorial/
His tutorials, however, only deal with mesh boxes which are ideal cubes. He then joins them together in various directions, but it is under 90 degrees angle.
( see attached file: "Daniel Pikers Examples" )
What I would like to achieve:
I want my bridges to go in all directions and angles, not just under 90 degree angle.
Ideally I would like to make a square (polygon) follow a curve (which moves in all axis) at certain number of division points. I would then loft these squares into a mesh and use that shape as a mesh box. I would later use this mesh box and relax it the same way as Daniel Piker used the cubes in his tutorial. The anchor points are only the vertices of the squares which create the lofted mesh box.
( see attached file: "New Attempts" )
As you can see below this procedure works even if the curve is moving in all directions not only along xy axis. There are, however, many problems connected to it.
The problem:
Despite all the effort I cannot seem to come up with a design where I would be able to draw a random curve which would be the guideline for my mesh box and then apply this box to one definition in order to relax the mesh and create the shape that I want. Without this I am again forced into a lot of copy pasting as the final mesh box is made out of several sections.
Also is there any way I could make the final resulting mesh a bit smoother? Increasing the number of mesh faces is probably the only way, right?
Thank you guys so much for any potential help.
All best,
Luka
…
phere with the maximum number of triangles but not much than a defined threshold.
I scaled that mesh just to fit Rhino grid, but it is not mandatory. What is useful, is to scale not uniformly the mesh (Scale NU). It could be done after cellular modifier applied or before or before and after. The 3 options are possible in the script. If you don’t need them just put 1 in scale sliders.
Ellipsoid mesh is the populated with points, I put 2 independents populations to randomize a bit further. For each vertices of the mesh the closest distance from the populated points is calculated.
Here is an illustration in color of this distance.
This distance is then used to calculate a bump. If domain for bump is beginning with negatives values to 0, it carves the mesh. Instead it bumps/inflates it.
Some images to illustrate the difference with populating 100 points with one or two populations.
Here some images to illustrate the application of scale before carving or after.
Next phase apply noise. At the moment I don't find it good.…
of a hack to push it to an android device, and you can't use labels, which is a very bad point!
...
I won't buy an Iphone!
The other is Control OSC. It looks rougher, but it has a lot of advantages to me.
+ Game of Life included!
+ you can use and update labels :))
+ Has a nice muti touch widget unfeatured in touch osc
+ You can script the interface using java script manipulation in gh, stream it to your dropbox and update in one "tap", as follows
Does anyone have experience with scripting interfaces for this software? I'm stuck already. I know nothing of java script to begin with. As you can see I managed to format the labels but the osc message I could not find a way, it stays untouched.
Just in case someone knows better, here are my "objects" (I said that right?). The userXXX are replaced in GH.
{ "name":"userName", "type":"Slider", "x":(xPadding + .11), "y": yPadding, "width":.82, "height":.082, "color":"userColor", "min":userMin, "max":userMax, "ontouchmove" : "var roundedvalue = this.value.toFixed(userFix); LbluserName2.changeValue(roundedvalue)", "onvaluechange": "oscManager.sendOSC('/userName', 'f', this.value.toFixed(userFix))",},{ "name":"LbluserName1", "type":"Label", "x":xPadding, "y": yPadding, "width":.1, "height":.05, "color":"userColor", "value": "userName"},{ "name":"LbluserName2", "type":"Label", "x":xPadding, "y": (yPadding + 0.05), "width":.1, "height":.05, "address":"/userName", "color":"userColor", "value": 0},…
eaningful. Humans must interact with it. Information arises when humans examine the data. Knowledge is created when information is transformed through human social interactions.”
Richard Gayle via spacecollective
The space in which we live can be monitored in many aspects and appears to be to be a gradient of data in continuous evolution and change. One of the major advantages of parametric tools is to be able to inform the design processes with accurate, specific and variable, in space and time, data streams .
DATA BODIES is a Grasshopper workshop that will focus on how its nature as an information processor and how it can be (ab)used in order to manipulate data, streaming inputs from various sources and use datafeeds to inform geometry or data structures from the very simple up to more complex ones. The aim is to give an understanding of information and data articultion as already a spatial and architectural operation; results may range from pure data communication protocols, dataviz or data-driven geometries depending on the skill levels and aspirations of each participant. The brief is also open to the suggestions and opportunities that may rise during the workflow.
DETAILS: http://www.superbelleville.org/dataworkshop/…
he picture (4).
Previously, I had a problem with generating intersections between the two directions of the beams, but a colleague helped me by extending beams, so there was no problem with lines of intersection. But this solution has generated curl (5) at the highest vertex geometry, which I ignored in order to repair it before printing, perhaps this mean my problem with my beam spread properly. Only when the beams is 19, does not jump no problem, but I still can not distribute them properly.
(1)
(2)
(3)
(4)
(5)
I tried to show as simply as possible by removing or signing my code in GHX file.
Thank you in advance for your help
…
he Cordyceps. Maybe some of you find this helpful/useful.
So basically, the Cordyceps is a physical module with 4 knobs and 1 slider. The knobs give an output between 1 and 1000, while the physical slider outputs 0-359. And of course, for this physical module I wrote a plugin to communicate with it. The knobs are intended to be the variables that modifies the design, while the physical slider is intended to be connected to the camera component.
Here I will put up "the recipe" for all to make their own module. You will be able to download the plugin as well.
Please send me a message if you want the 3D-files for the knobs, the box and slider knob. They've been made to directly 3D-print.
Plugin:
https://github.com/zakadjeb/Cordyceps/blob/master/Cordyceps/Cordyce...
Code for Arduino IDE:
https://github.com/zakadjeb/Cordyceps/blob/master/Arduino/_Arduino_...
What you need:
1x - Arduino (Leonardo, UNO or whatever)
4x - Potentiometers
1x - Sliding potentiometer
1x - Breadboard
Bundle of jump wires.
1. So, a potentiometer is a variable resistor, which is basically a component that changes the resistance between the voltage and the ground.
If A is supplied with 5V then B must be connected to Ground. The W will give "read" the resistance, and thus should be placed in Analog input (A0-A5) on the Arduino. The slider potentiometer works the same way.
2. Now connect the 4 pots to each their Analog input. The slider is supposed to be in A4. So to make sure:
A0: Knob1
A1: Knob2
A2: Knob3
A3: Knob4
A4: Slider
3. Now it's time to connect the voltage! Using the breadboard, the voltage can be sent through 1 line, the Ground as well. It should be quite easy to connect them.
4. Now, download the Arduino IDE and copy-paste the code I supplied above. In the IDE, you need to let it know which Arduino you're working with, and which port is should send the script.
5. Almost there. Download the plugin. Open the port you're using through the plugin. Set Start to True and the Cordyceps should be within you.
This recipe will be updated!
Let me know if there are any issues.
// Zakaria Djebbara…
he Cordyceps. Maybe some of you find this helpful/useful.
So basically, the Cordyceps is a physical module with 4 knobs and 1 slider. The knobs give an output between 1 and 1000, while the physical slider outputs 0-359. And of course, for this physical module I wrote a plugin to communicate with it. The knobs are intended to be the variables that modifies the design, while the physical slider is intended to be connected to the camera component.
Here I will put up "the recipe" for all to make their own module. You will be able to download the plugin as well.
Please send me a message if you want the 3D-files for the knobs, the box and slider knob. They've been made to directly 3D-print.
Plugin:
https://github.com/zakadjeb/Cordyceps/blob/master/Cordyceps/Cordyce...
Code for Arduino IDE:
https://github.com/zakadjeb/Cordyceps/blob/master/Arduino/_Arduino_...
What you need:
1x - Arduino (Leonardo, UNO or whatever)
4x - Potentiometers
1x - Sliding potentiometer
1x - Breadboard
Bundle of jump wires.
1. So, a potentiometer is a variable resistor, which is basically a component that changes the resistance between the voltage and the ground.
If A is supplied with 5V then B must be connected to Ground. The W will give "read" the resistance, and thus should be placed in Analog input (A0-A5) on the Arduino. The slider potentiometer works the same way.
2. Now connect the 4 pots to each their Analog input. The slider is supposed to be in A4. So to make sure:
A0: Knob1
A1: Knob2
A2: Knob3
A3: Knob4
A4: Slider
3. Now it's time to connect the voltage! Using the breadboard, the voltage can be sent through 1 line, the Ground as well. It should be quite easy to connect them.
4. Now, download the Arduino IDE and copy-paste the code I supplied above. In the IDE, you need to let it know which Arduino you're working with, and which port is should send the script.
5. Almost there. Download the plugin. Open the port you're using through the plugin. Set Start to True and the Cordyceps should be within you.
This recipe will be updated!
Let me know if there are any issues.
// Zakaria Djebbara…
uired information, a poor representation of data evolve misreading messages and by turn ambiguous responses especially with complex data. Inforgraphics are graphic visual representations of information, data or knowledge intended to present complex information quickly and clearly. In the nowadays flow of complex information, Infographics is the key for optimized visual communication. The use of infographics is an important step towards developing a pedagogical approach that draws on visuals where 90% of Information is transmitted to the brain so it is crucial to tickle the optic nerves to get people excited about data. The workshop investigates how computational tools can aid in designing and controlling complex information to be easily understood in addition to improve cognition by utilizing graphics to enhance the human visual system’s ability to see patterns and trends and much more likely to be remembered in today’s fast – paced environment. This workshop investigates multiple computational tools and techniques of developing coefficient visualization of data types including; network, statistical and hierarchal data. The workshop objective is to reconsider visual representation a promising design tool for architects, artists and designers. /// Application To apply, please follow this link to fill the application form https://docs.google.com/forms/d/1HOv6c1_LzhHNJU5n_FLvuhC-Yg75HDfbEcq6TN6mulI/viewform /// Fees 1200 EGP for students / 1500 EGP for graduates and young professionals more info on the workshop webpage: http://www.encodestudio.net/#!infographics/cqvl
POSTS
…