s levels of detail by subdividing a 6 sided cube mesh and projecting its vertices according to a referenced height map. This is one of the standard conventions for building full sizes planets. At the lowest level (0) the mesh planet is made of 6 pieces(each 32x32 resolution). The next level down (1) is made of 24 pieces... 6 divided by 4 = 24. Level (2) is 96 quads etc etc. The script will generate each quad at its sub-division level and compare edge vertices to neighboring quads. It will then make sure any shared vertices are in fact at the same projected vector. This ensures a planet quad with edge vertices that match.
The problems comes in texturing each quad.
If I build the quad as a nurb surface from points I can place the texture easily because each surface UV maps squarely to my texture map (which is also square).
If I build the quad as a mesh I cannot just apply the square texture to the mesh UVs. This is because when you unwrap the UVs from a mesh they will not unwrap like a nurb surface's UVs. Therefore to get the correct mapping I would have to manipulate each UV back to an evenly aligned array (which is 1024 points in a 32x32 resolution UV). Maya and blender have 'relax uv' and 'align UV' functions but they don't do the trick and manual corrections are out of the question. So why not skip the mesh method and use the nurb method?
I did this and there is a trade off. The nurb will accept the material texture I want with no other work on my end but when I export the object as an .obj rhino creates its own mesh to describe the nurb(with various unsatisfactory setting options). This works great up to a point because at some level the interpreted mesh will have vertices that do no match at the edges, ie .. creating visible seams in the mesh. The picture below is the nearly seamless planet at LOD(1) made of 24 quads, each with 32x32 vertice resolution and a 512x512 jpg texture running in Unity3d 5. It works but at close level there are seams. This will be resolved simply by having the next LOD(x) instantiate before getting close enough to see the seam but at core nerd level I want the seamless mesh.
So, I can make the seamless mesh but I can not realistically texture map it. I can also make the nurb surface from points and texture it at the expense of the edge vertices matching. I am at the split in the road but I want to have my cake and eat it too. Thoughts, comments, trolls...?
Thanks for reading =)
Footnote: For you pros I am not using seamless noise across the map I am using grasshopper to sew up my otherwise non perfect edges.
Other programs in the pipeline:
-WorldMachine 2
-Wilbur
-Photoshop
-Unity3d…
fear that it would be too hard, but I was pleasantly surprised. Not that bad, even for a C# novice. I am attaching the *.cs files for three components:
SerialCreate component creates the serial port instance. This component controls port parameters and opens/closes the port. (It won't close the port, however.) SerialWrite and Read try to interact with the port created by SerialCreate. I can verify that the port opens because it's unavailable to other terminal applications, but if I try to close the port, it won't...it stays open until I restart Rhino. SerialWrite works, because I can see the rx light on my device light up when I enter text in grasshopper. SerialRead does not work. I blue screen with a DPC WATCHDOG VIOLATION.
All in all, not too bad for a day's work. I'll forget the user objects and go for custom components. The question that still remains is that I don't think I'm correctly or efficiently sharing the serial port instance with the other classes. Again, this is just a hack, but I'm happy I'm closer to solving the problem (or so it seems). If anyone has any ideas about how to better go about this, I'd appreciate any suggestions.
Thanks again,
~BB~…
ers and researchers, programmers and artists, professionals and academics who come together for 4 days of intense collaboration, development, and design.
The sg2012 Workshop will be organised around Clusters. Clusters are hubs of expertise. They comprise of people, knowledge, tools, materials and machines. The Clusters provide a focus for workshop participants working together within a common framework.
Clusters provide a forum for the exchange of ideas, processes and techniques and act as a catalyst for design resolution. The Workshop is made up of ten Clusters that respond in diverse ways to the sg2012 Challenge Material Intensities.
Applicants to the sg2012 Workshop will select their preferred cluster from the following:
Beyond Mechanics
Micro Synergetics
Composite Territories
Ceramics 2.0
Material Conflicts
Transgranular Perspiration
Reactive Acoustic Environments
Form Follows Flow
Bioresponsive Building Envelopes
Gridshell Digital Tectonics
More information about the Workshop and Clusters can be found here:
http://smartgeometry.org/index.php?option=com_content&view=article&id=116&Itemid=131
The application process will close on January 15th, 2012.
Full Fee $1500
Reduced Fee $750
Scholarship Fee $350
Fees include attendance to both the workshop and conference from March 19th-24th.
Reduced Fee and Scholarships are available only for Academics, Students and Young Practitioners, and are awarded during a competitive peer review process.
sg2012 takes place from 19-24 March 2012 at EMPAC (http://empac.rpi.edu/) and is hosted by Rensselaer Polytechnic Institute in Troy, upstate New York USA. The Workshop and Conference will be a gathering of the global community of innovators and pioneers in the fields of architecture, design and engineering.
The event will be in two parts: a four day Workshop 19-22 March, and a public conference beginning with Talkshop 23 March, followed by a Symposium 24 March. The event follows the format of the highly successful preceding events sg2010 Barcelona and sg2011 Copenhagen.
sg2012 Challenge Material Intensities
Simulation, Energy, Environment
Imagine the design space of architecture was no longer at the scale of rooms, walls and atria, but that of cells, grains and vapour droplets. Rather than the flow of people, services, or construction schedules, the focus becomes the flow of light, vapour, molecular vibrations and growth schedules: design from the inside out.
The sg2012 challenge, Material Intensities, is intended to dissolve our notion of the built environment as inert constructions enclosing physically sealed spaces. Spaces and boundaries are abundant with vibration, fluctuating intensities, shifting gradients and flows. The materials that define them are in a continual state of becoming: a dance of energy and information. Material potential is defined by multiple properties: acoustical, chemical, electrical, environmental, magnetic, manufacturing, mechanical, optical, radiological, sensorial, and thermal. The challenge for sg2012 Material Intensities is to consider material economy when creating environments, micro-climates and contexts congenial for social interaction, activities and organisation. This challenge calls for design innovation and dialogue between disciplines and responsibilities. sg2010 Working Prototypes strove to emancipate digital design from the hard drive by moving from the virtual to the actual in wrestling with the tangible world of physical fabrication. sg2011 Building the Invisible focused on informing digital design with real world data. sg2012 Material Intensities strives to energise our digital prototypes and infuse them with material behaviour. They have the potential to become rich simulations informed by the material dynamics, chemical composition, energy flows, force fields and environmental conditions that feed back into the design process.
More information can be found at http://www.smartgeometry.org
Follow us on Twitter at http://twitter.com/smartgeometry…
Added by Shane Burger at 12:29pm on December 13, 2011
eñadores, y creativos interesados en el aprendizaje de metodos avanzados de generación y racionalización de geometría compleja, y su implementación en distintas etapas del proceso de diseño.
Se abordaran los conceptos básicos para hacer frente a diversas problemas de diseño a través de la implementación de una serie de plataformas computacionales con el objetivo de construir un flujo de trabajo que permita optimizar proyectos de diversa escala y explorar esquemas geometricos complejos de manera rápida y eficiente.A lo largo del 6 dias trabajaremos con la plataforma de Modelado 3d Rhinoceros, el entorno de programación visual de Grasshopper y el motor de Renderizado de Vray.Estudiantes: $4,500.00Profesionistas: $5,500.00info+inscripciones:workshop@complexgeometry.com[044] 33 3956 9209[044] 33 1410 8975[044] 81 1916 8657
…
glass panel).
2. This actually means that the parts on duty they don't differ that much. Meaning that we can use an "average" size (and "local" topology) acting as the Jack for all trades.
3. Meaning that we can effectively solve the abstract topology with an abstract app the likes of GH and then place in properly defined coordinate systems all the real-life bits and nuts ... closely "emulating" a pro solution (that could "adjust" the parts as well).
4. This means that one particular C# needs more lines of code since as it is it defines cable axis on a per nod to node basis ... but in fact these are defined as the min segment between curves (circles to be exact).
5. Additionally the end part of each strut differs depending on how many pairs of stabilizing cables are used (either 2 or 1). Meaning some lines of code more for defining the proper coordinate systems for the instance definitions.
6. This is the reason that I've postponed mailing to you the 4 horsemen (because PRIOR finishing the whole you MUST define what parts to use: the classic bottom-top design approach).
But in order to receive the Salvation (aka: Apocalypse) you MUST answer correctly to a simple puzzle:
Provided that money is no object, pick your car:
1. Ferrari 245 (Less is more)
2. Lancia Stratos (Lethal).
3. Cobra 427 (Men only)
4. Ford GT40 (Mama mia)
5. Ariel Atom (Mental)
6. Aston Zagato GTB4 (Sweet Jesus)
7. Fulvia HF Fanalone (THE racer)
8. Lambo Miura (Enough said)
9. Lotus Elise (Just add lightness)
10. Alfa Romeo 8C Competizione (In red)…
he Cordyceps. Maybe some of you find this helpful/useful.
So basically, the Cordyceps is a physical module with 4 knobs and 1 slider. The knobs give an output between 1 and 1000, while the physical slider outputs 0-359. And of course, for this physical module I wrote a plugin to communicate with it. The knobs are intended to be the variables that modifies the design, while the physical slider is intended to be connected to the camera component.
Here I will put up "the recipe" for all to make their own module. You will be able to download the plugin as well.
Please send me a message if you want the 3D-files for the knobs, the box and slider knob. They've been made to directly 3D-print.
Plugin:
https://github.com/zakadjeb/Cordyceps/blob/master/Cordyceps/Cordyce...
Code for Arduino IDE:
https://github.com/zakadjeb/Cordyceps/blob/master/Arduino/_Arduino_...
What you need:
1x - Arduino (Leonardo, UNO or whatever)
4x - Potentiometers
1x - Sliding potentiometer
1x - Breadboard
Bundle of jump wires.
1. So, a potentiometer is a variable resistor, which is basically a component that changes the resistance between the voltage and the ground.
If A is supplied with 5V then B must be connected to Ground. The W will give "read" the resistance, and thus should be placed in Analog input (A0-A5) on the Arduino. The slider potentiometer works the same way.
2. Now connect the 4 pots to each their Analog input. The slider is supposed to be in A4. So to make sure:
A0: Knob1
A1: Knob2
A2: Knob3
A3: Knob4
A4: Slider
3. Now it's time to connect the voltage! Using the breadboard, the voltage can be sent through 1 line, the Ground as well. It should be quite easy to connect them.
4. Now, download the Arduino IDE and copy-paste the code I supplied above. In the IDE, you need to let it know which Arduino you're working with, and which port is should send the script.
5. Almost there. Download the plugin. Open the port you're using through the plugin. Set Start to True and the Cordyceps should be within you.
This recipe will be updated!
Let me know if there are any issues.
// Zakaria Djebbara…
he Cordyceps. Maybe some of you find this helpful/useful.
So basically, the Cordyceps is a physical module with 4 knobs and 1 slider. The knobs give an output between 1 and 1000, while the physical slider outputs 0-359. And of course, for this physical module I wrote a plugin to communicate with it. The knobs are intended to be the variables that modifies the design, while the physical slider is intended to be connected to the camera component.
Here I will put up "the recipe" for all to make their own module. You will be able to download the plugin as well.
Please send me a message if you want the 3D-files for the knobs, the box and slider knob. They've been made to directly 3D-print.
Plugin:
https://github.com/zakadjeb/Cordyceps/blob/master/Cordyceps/Cordyce...
Code for Arduino IDE:
https://github.com/zakadjeb/Cordyceps/blob/master/Arduino/_Arduino_...
What you need:
1x - Arduino (Leonardo, UNO or whatever)
4x - Potentiometers
1x - Sliding potentiometer
1x - Breadboard
Bundle of jump wires.
1. So, a potentiometer is a variable resistor, which is basically a component that changes the resistance between the voltage and the ground.
If A is supplied with 5V then B must be connected to Ground. The W will give "read" the resistance, and thus should be placed in Analog input (A0-A5) on the Arduino. The slider potentiometer works the same way.
2. Now connect the 4 pots to each their Analog input. The slider is supposed to be in A4. So to make sure:
A0: Knob1
A1: Knob2
A2: Knob3
A3: Knob4
A4: Slider
3. Now it's time to connect the voltage! Using the breadboard, the voltage can be sent through 1 line, the Ground as well. It should be quite easy to connect them.
4. Now, download the Arduino IDE and copy-paste the code I supplied above. In the IDE, you need to let it know which Arduino you're working with, and which port is should send the script.
5. Almost there. Download the plugin. Open the port you're using through the plugin. Set Start to True and the Cordyceps should be within you.
This recipe will be updated!
Let me know if there are any issues.
// Zakaria Djebbara…
rves/holes. However, the Kangaroo script itself is prone to locking up so it seems like it might take forever. You can even double click stop the timer from the Windows task bar, I hadn't noticed that before:
You have to use that or right click disable the timer since even with the Reset toggle button input set to True the timer itself locks up the script a bit when you are changing things around.
Just setting the min/max numbers both to a desired mesh size gives a uniform mesh:
Oh weird, it's about if the timer is right click set to so small an interval that it gets ahead of Kangaroo! When you see how long each cycle is taking with the Display > Canvas Widgets > Profiler you just set the timer for above that and the interface comes back into being responsive. It only takes a few Kangaroo cycles to do the inflation, so a full second timer interval is even workable.
A finer mesh:
It's funny running it so slow since it overinflates at first, bulging out, before it equilibrates.
You have control over inflation pressure and mesh stiffness, for a variety of effects.
This is a good system once I realized the timer needed to be mellowed out.
What made it work was the fast custom meshing since a normal mesh is awful and MeshMachine wouldn't work with sharp corner holes at all, breaking out of the boundary even if I fixed curves or vertices or did the equivalent with NURBS surfaces instead of a starting mesh.
There is an initiation time for Kangaroo that doesn't show up on its Profiler time that happens even with the timer off.
There are some fine areas that can't inflate with a reasonable mesh setting:
Worth playing with but no match for ArtCAM since it suffers odd delays in between working fast. If I could get better 2D meshes, that were more adaptive it would be better, but MeshMachine is one of the only re-meshers I know and it's broken for even mildly sharp hole features.
Ah, how about a crude mesh that is then subdivided, guaranteeing inner vertices everywhere? Sort of works, but is still too dense. Way too dense to even do anything. The subdivision triangulates the quads, vastly increasing the mesh wire density. Better just to make a finer initial mesh with plenty of quads.…
Added by Nik Willmore at 12:57am on February 21, 2016