he Cordyceps. Maybe some of you find this helpful/useful.
So basically, the Cordyceps is a physical module with 4 knobs and 1 slider. The knobs give an output between 1 and 1000, while the physical slider outputs 0-359. And of course, for this physical module I wrote a plugin to communicate with it. The knobs are intended to be the variables that modifies the design, while the physical slider is intended to be connected to the camera component.
Here I will put up "the recipe" for all to make their own module. You will be able to download the plugin as well.
Please send me a message if you want the 3D-files for the knobs, the box and slider knob. They've been made to directly 3D-print.
Plugin:
https://github.com/zakadjeb/Cordyceps/blob/master/Cordyceps/Cordyce...
Code for Arduino IDE:
https://github.com/zakadjeb/Cordyceps/blob/master/Arduino/_Arduino_...
What you need:
1x - Arduino (Leonardo, UNO or whatever)
4x - Potentiometers
1x - Sliding potentiometer
1x - Breadboard
Bundle of jump wires.
1. So, a potentiometer is a variable resistor, which is basically a component that changes the resistance between the voltage and the ground.
If A is supplied with 5V then B must be connected to Ground. The W will give "read" the resistance, and thus should be placed in Analog input (A0-A5) on the Arduino. The slider potentiometer works the same way.
2. Now connect the 4 pots to each their Analog input. The slider is supposed to be in A4. So to make sure:
A0: Knob1
A1: Knob2
A2: Knob3
A3: Knob4
A4: Slider
3. Now it's time to connect the voltage! Using the breadboard, the voltage can be sent through 1 line, the Ground as well. It should be quite easy to connect them.
4. Now, download the Arduino IDE and copy-paste the code I supplied above. In the IDE, you need to let it know which Arduino you're working with, and which port is should send the script.
5. Almost there. Download the plugin. Open the port you're using through the plugin. Set Start to True and the Cordyceps should be within you.
This recipe will be updated!
Let me know if there are any issues.
// Zakaria Djebbara…
he Cordyceps. Maybe some of you find this helpful/useful.
So basically, the Cordyceps is a physical module with 4 knobs and 1 slider. The knobs give an output between 1 and 1000, while the physical slider outputs 0-359. And of course, for this physical module I wrote a plugin to communicate with it. The knobs are intended to be the variables that modifies the design, while the physical slider is intended to be connected to the camera component.
Here I will put up "the recipe" for all to make their own module. You will be able to download the plugin as well.
Please send me a message if you want the 3D-files for the knobs, the box and slider knob. They've been made to directly 3D-print.
Plugin:
https://github.com/zakadjeb/Cordyceps/blob/master/Cordyceps/Cordyce...
Code for Arduino IDE:
https://github.com/zakadjeb/Cordyceps/blob/master/Arduino/_Arduino_...
What you need:
1x - Arduino (Leonardo, UNO or whatever)
4x - Potentiometers
1x - Sliding potentiometer
1x - Breadboard
Bundle of jump wires.
1. So, a potentiometer is a variable resistor, which is basically a component that changes the resistance between the voltage and the ground.
If A is supplied with 5V then B must be connected to Ground. The W will give "read" the resistance, and thus should be placed in Analog input (A0-A5) on the Arduino. The slider potentiometer works the same way.
2. Now connect the 4 pots to each their Analog input. The slider is supposed to be in A4. So to make sure:
A0: Knob1
A1: Knob2
A2: Knob3
A3: Knob4
A4: Slider
3. Now it's time to connect the voltage! Using the breadboard, the voltage can be sent through 1 line, the Ground as well. It should be quite easy to connect them.
4. Now, download the Arduino IDE and copy-paste the code I supplied above. In the IDE, you need to let it know which Arduino you're working with, and which port is should send the script.
5. Almost there. Download the plugin. Open the port you're using through the plugin. Set Start to True and the Cordyceps should be within you.
This recipe will be updated!
Let me know if there are any issues.
// Zakaria Djebbara…
bro su Grasshopper "Architettura Parametrica", co-director della AA Rome Visiting School per la Architectural Association di Londra (http://www.arturotedeschi.com/).
Il corso introdurrà il software Grasshopper, plug-in per la modellazione parametrica in Rhino. I partecipanti saranno guidati attraverso gli aspetti più importanti del programma e le principali tecniche per la programmazione visuale all’interno di Rhinoceros. Il corso è rivolto a studenti con esperienza minima nella modellazione 3D e si articolerà in lezioni teoriche ed esercitazioni. Sarà rilasciato un attestato di partecipazione.
principali argomenti: - Introduzione alla progettazione parametrica: teoria, esempi, casi studio - Grasshopper: concetti base, logica algoritmica, interfaccia grafica - Nozioni fondamentali: componenti, connessioni, data flow - Funzioni matematiche e logiche, serie, gestione dei dati - Analisi e definizione di curve e superfici - Definizione di griglie e pattern complessi - Trasformazioni geometriche - Data tree: gestione di dati complessi - Meshes e Subdivision Surfaces (Weaverbird)
GENOVA 11 > 14 APRILE 2013 programma completo ed iscrizioni…
roduced the same error.
I tried to run them again with the file already open and I got this (I imagine predictable) error:
Sorry! But the number of available CPUs on your machine is 4.
Honeybee set the number of CPUs to 4.
Grid-based Radiance simulation
The component is checking ad, as, ar and aa values. This is just to make sure that the results are accurate enough.
Good to go!
Current working directory is set to: C:\ladybug\Parametric_Shading_Wall\psw_z0.25_t.025_y.2_r90_m3_lux\gridBasedSimulation\
Failed to remove the old directory.
WindowsError(32, 'The process cannot access the file because it is being used by another process')
Failed to read the results!
rtrace: fatal - (psw_z0.25_t.025_y.2_r90_m3_lux_RAD.oct): truncated octree
rtrace: fatal - (psw_z0.25_t.025_y.2_r90_m3_lux_RAD.oct): truncated octree
rtrace: fatal - (psw_z0.25_t.025_y.2_r90_m3_lux_RAD.oct): truncated octree
rtrace: fatal - (psw_z0.25_t.025_y.2_r90_m3_lux_RAD.oct): truncated octree
Runtime error (PythonException): Failed to read the results!
rtrace: fatal - (psw_z0.25_t.025_y.2_r90_m3_lux_RAD.oct): truncated octree
rtrace: fatal - (psw_z0.25_t.025_y.2_r90_m3_lux_RAD.oct): truncated octree
rtrace: fatal - (psw_z0.25_t.025_y.2_r90_m3_lux_RAD.oct): truncated octree
rtrace: fatal - (psw_z0.25_t.025_y.2_r90_m3_lux_RAD.oct): truncated octree
Traceback:
line 336, in script
@Mostapha, if it is indeed a different issue, what do you think it could be?
Thanks again,
-Nicholas…
e surfaces (in both directions) according to an input length I set?
2. [refer to image: split surface, butt joint case]
Then can I control where the split occurs? Because if all splits happen at the same positions, the waffle would not be structural.
3. [refer to image: split surface, with gaps case]
Another situation is to control where the split occurs, but gaps are created at the split. How can I get this done? This has reference to the AA pavilion.
Files attached.
Thanks for help,
Fanny
…
GH, same as using sweep2 command in Rhino.
The one on the right is what I got so far (the output smooth our the kink of the original rails). Basically I am just following the methods provided by sdk sample: http://wiki.mcneel.com/developer/sdksamples/sweep2 .
The following is the function I copy and use directly from the SDK sample. By using this function, I can generate the sweep surface at right. But I want to have is the one in the middle with the kink edges. Can anyone show me how and where to modify he settings? I guess some sweep arguments need to be changed? I have try couples, such m_simplify, m_bSimpleSweep, m_bSameHeight, m_rebuild_count... but still cannot find a right combination for this function to output the sweep surface I want. Any suggestions or helps are very appreciated. Thanks for your help and time on this.
'Sweep2 function'----------------
Sub Sweep2( ByVal Rail1 As IOnCurve, _
ByVal Rail2 As IOnCurve, _
ByVal sCurves As List(Of IOnCurve), _
ByRef Sweep2_Breps As List(Of OnBrep))
'Define a new class that contains sweep2 arguments
Dim args As New MArgsRhinoSweep2
'Set the 2 rails
Dim Edge1 As New MRhinoPolyEdge
Dim Edge2 As New MRhinoPolyEdge
Edge1.Append(Rail1.DuplicateCurve())
Edge2.Append(Rail2.DuplicateCurve())
'Add rails to sweep arguments
args.m_rail_curves(0) = Edge1
args.m_rail_curves(1) = Edge2
args.m_bClosed = False
Dim section_curves As New List(Of OnCurve)
'Loop through sections to set parameters
For Each Section As IOnCurve In sCurves
Dim sCurve As OnCurve = Section.DuplicateCurve()
section_curves.Add(sCurve)
Dim t0 As Double = 0
If Not Edge1.GetClosestPoint(sCurve.PointAtStart(), t0) Then
If Not Edge1.GetClosestPoint(sCurve.PointAtEnd(), t0) Then
Dim s As Double = 0
sCurve.GetNormalizedArcLengthPoint(0.5, s)
Edge1.GetClosestPoint(sCurve.PointAt(s), t0)
End If
End If
args.m_rail_params(0).Append(t0)
Dim t1 As Double = 0
If Not Edge2.GetClosestPoint(sCurve.PointAtStart(), t1) Then
If Not Edge2.GetClosestPoint(sCurve.PointAtEnd(), t1) Then
Dim s As Double = 0
sCurve.GetNormalizedArcLengthPoint(0.5, s)
Edge2.GetClosestPoint(sCurve.PointAt(s), t1)
End If
End If
args.m_rail_params(1).Append(t1)
Next
'Set shapes
args.m_shape_curves = section_curves.ToArray
'Set the rest of parameters
args.m_simplify = 0
args.m_bSimpleSweep = False
args.m_bSameHeight = False
args.m_rebuild_count = -1 'Sample point count for rebuilding shapes
args.m_refit_tolerance = RMA.Rhino.RhUtil.RhinoApp.ActiveDoc.AbsoluteTolerance()
args.m_sweep_tolerance = RMA.Rhino.RhUtil.RhinoApp.ActiveDoc.AbsoluteTolerance()
args.m_angle_tolerance = RMA.Rhino.RhUtil.RhinoApp.ActiveDoc.AngleToleranceRadians()
Dim sBreps() As OnBrep = Nothing
If (RhUtil.RhinoSweep2(args, sBreps)) Then
For Each b As OnBrep In sBreps
Sweep2_Breps.Add(b)
Next
End If
Return
End Sub
…
; GH, this one came out and rhinoceros is disappear...like this
it said " Rhinoceros5's working is stopped. because some problems occured so Rhinoceros5 can't work correctly no longer " then I have no choice but terminate Rhinoceros.
There are some discussion about RhinoIronPython installing numpy though, no one has same problem like me. so Please somebody tell me!!
and one more question...just in case, I tried to install numpy into ironPython2.7
C:\Program Files (x86)\IronPython 2.7>ipy "C:\Program Files (x86)\IronPython 2.7\ironpkg-1.0.0..py" --installBootstrapping: c:\users\owner\appdata\local\temp\tmp2nand1\ironpkg-1.0.0-1.egg 118 KB [.................................................................]
C:\Program Files (x86)\IronPython 2.7>ironpkg -hUsage: ironpkg-script.py [options] [name] [version]
.
.
.
C:\Program Files (x86)\IronPython 2.7>ironpkg scipyWrote configuration file: C:\Users\owner\.ironpkg=============================================================================Traceback (most recent call last): File "C:\Program Files (x86)\IronPython 2.7\ironpkg-script.py", line 10, in <module> File "C:\Program Files (x86)\IronPython 2.7\lib\site-packages\enstaller\main.py", line 364, in main File "C:\Program Files (x86)\IronPython 2.7\lib\site-packages\enstaller\indexed_repo\chain.py", line 27, in __init__ File "C:\Program Files (x86)\IronPython 2.7\lib\site-packages\enstaller\indexed_repo\chain.py", line 67, in add_repo File "C:\Program Files (x86)\IronPython 2.7\lib\site-packages\enstaller\utils.py", line 92, in write_data_from_url File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 435, in open File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 407, in _call_chain File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 654, in http_error_302 File "C:\Program Files (x86)\IronPython 2.7\Lib\httplib.py", line 1261, in __init__ File "C:\Program Files (x86)\IronPython 2.7\lib\site-packages\enstaller\utils.py", line 73, in open_url File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 154, in urlopen File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 547, in http_response File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 467, in error File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 429, in open File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 446, in _open File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 407, in _call_chain File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 1240, in https_open File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 1167, in do_openAttributeError: 'module' object has no attribute '_create_default_https_context'
C:\Program Files (x86)\IronPython 2.7>
how can I deal with this error?…
ents will react to sensors, creating a range of different lighting and spatial effects that will trigger further movement and produce a feedback loop of behaviour and response. To accommodate this responsiveness, the design will be developed using parametric associative modeling, processing, arduino, and digital fabrication using the CNC and Laser Cutters. Students can both develop completely new designs, and/or work on the evolution of the Workshop 1 Supple Pavilion project.
The Visiting School will return to Barracão Escola de Carnaval to evolve the design of the migrating Pavilions, their contents and their context, exploring a design philosophy of interactive event design and the production of a creative fusion of high-tech design generation and fabrication with low-tech redefinition of Carnival-float artisan techniques, paraphernalia, and materials. We will work in the immense and creative Pimpolhos warehouse, collaborating with local artisans of several Samba Schools in the post-industrial, partly-derelict Porto do Rio area, (the birthplace of the Carnival and Samba), introducing digital fabrication techniques. The goal is to create interventions for micro-venues and cultural events that express the identity of the Samba culture within the `Porto Maravilha` planning.
Instruction for the Supple Pavilions workshop series will be led by Rob Stuart-Smith of Kokkugia, Lawrence Friesen of Generative Geometry, Ivan Ivanoff of Interactive Art Estado Lateral Media Lab, Toru Hasegawa of Proxy, with Anne Save de Beaurecueil and Franklin Lee of SUBdV, along with other AA tutors, the Pimpolhos Artistic Directors, and Carnival float-fabricators. Each workshop will provide an introduction to computational design (Grasshopper, Processing and Arduino) and digital fabrication, no previous computational experience is required. Students taking part in multiple workshops will have access to advanced computation instruction. This workshop will produce 1:1 prototyping, exploring the structure and transformations of the pavilions. Final fabrication and assemblage will occur in July.
The workshop is open to architecture and design students and professionals worldwide. Participants can take part in one or more workshops, with fee discounts offered to those interested in multiple workshops.
…
he results are accurate enough.Good to go!Current working directory is set to: C:\002_VIDEO\02_UNI\TU_GRAZ\01_DISSERTATION\02_RESEARCH\08_POMODORO\01_SIMULATION_MODEL/03_HONEYBEE\VF_00\gridBasedSimulation\start cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineRuntime error (IndexOutOfRangeException): index out of range: 0Traceback: line 271, in script…
is set to: C:\002_VIDEO\02_UNI\TU_GRAZ\01_DISSERTATION\02_RESEARCH\08_POMODORO\01_SIMULATION_MODEL/03_HONEYBEE\VF_00\gridBasedSimulation\start cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get Commandlinestart cmd /c C:\Users\paratufello\AppData\Roaming\Ladybug\unnamed\annualSimulation\unnamed_7_DS.batWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineWMIC PROCESS get CommandlineRuntime error (IndexOutOfRangeException): index out of range: 0Traceback: line 271, in script…