ed file and code below:
Color ColorAt(Mesh mesh, int faceIndex, double t0, double t1, double t2, double t3) { // int rc = -1; var color = Rhino.Display.Color4f.Black;
if( mesh.VertexColors.Count != 0) { // test to see if face exists if( faceIndex >= 0 && faceIndex < mesh.Faces.Count ) { /// Barycentric quad coordinates for the point on the mesh /// face mesh.Faces[FaceIndex].
/// If the face is a triangle /// disregard T[3] (it should be set to 0.0).
/// If the face is /// a quad and is split between vertexes 0 and 2, then T[3] /// will be 0.0 when point is on the triangle defined by vi[0], /// vi[1], vi[2]
/// T[1] will be 0.0 when point is on the /// triangle defined by vi[0], vi[2], vi[3].
/// If the face is a /// quad and is split between vertexes 1 and 3, then T[2] will /// be -1 when point is on the triangle defined by vi[0], /// vi[1], vi[3]
/// and m_t[0] will be -1 when point is on the /// triangle defined by vi[1], vi[2], vi[3].
MeshFace face = mesh.Faces[faceIndex];
// Collect data for barycentric evaluation. Color p0, p1, p2;
if(face.IsTriangle) { p0 = mesh.VertexColors[face.A]; p1 = mesh.VertexColors[face.B]; p2 = mesh.VertexColors[face.C]; } else { if( t3 == 0 ) { // point is on subtriangle {0,1,2} p0 = mesh.VertexColors[face.A]; p1 = mesh.VertexColors[face.B]; p2 = mesh.VertexColors[face.C]; } else if( t1 == 0 ) { // point is on subtriangle {0,2,3} p0 = mesh.VertexColors[face.A]; p1 = mesh.VertexColors[face.C]; p2 = mesh.VertexColors[face.D]; //t0 = t0; t1 = t2; t2 = t3; } else if( t2 == -1 ) { // point is on subtriangle {0,1,3} p0 = mesh.VertexColors[face.A]; p1 = mesh.VertexColors[face.B]; p2 = mesh.VertexColors[face.D]; //t0 = t0; //t1 = t1; t2 = t3; } else { // point must be on remaining subtriangle {1,2,3} p0 = mesh.VertexColors[face.B]; p1 = mesh.VertexColors[face.C]; p2 = mesh.VertexColors[face.D]; t0 = t1; t1 = t2; t2 = t3; } }
/** double r = t0 * p0.FractionRed() + t1 * p1.FractionRed() + t2 * p2.FractionRed(); double g = t0 * p0.FractionGreen() + t1 * p1.FractionGreen() + t2 * p2.FractionGreen(); double b = t0 * p0.FractionBlue() + t1 * p1.FractionBlue() + t2 * p2.FractionBlue();
ON_Color color; color.SetFractionalRGB(r, g, b);
unsigned int abgr = (unsigned int)color; rc = (int) ABGR_to_ARGB(abgr); **/ var c0 = new Rhino.Display.Color4f(p0); var c1 = new Rhino.Display.Color4f(p1); var c2 = new Rhino.Display.Color4f(p2); float s0 = (float) t0; float s1 = (float) t1; float s2 = (float) t2;
float R = s0 * c0.R + s1 * c1.R + s2 * c2.R; float G = s0 * c0.G + s1 * c1.G + s2 * c2.G; float B = s0 * c0.B + s1 * c1.B + s2 * c2.B; color = new Rhino.Display.Color4f(R, G, B, 1); } } return color.AsSystemColor(); }
…
y using the Honeybee_Update Honeybee component.
The video below (best viewed in full-screen mode) provides an idea of what these components are capable of being used for:
The video below shows how these components can be used in an existing Honeybee project (for additional links please open this video in youtube):
I have uploaded two examples as Hydra files that show how these components can be used for grid-point and image-based simulations:
Example1 : Grid Point Calculations
Example2: Image based simulation
Finally, a more esoteric application is demonstrated in this video:
These components are still in the beta-testing stage. Some of the limitations of the components are:
1. Only Type C photometry IES files are supported at present.
2. Rhino is likely to get sluggish if there are too many luminaires (i.e. light fixtures) present in a scene.
3. Due to the spectral limitations of the ray-tracing software (RADIANCE), simulations involving color mixing might not be physically realizable.
Additional details about photometric and spectral calculations are probably an overkill for this forum. However, I'd be glad to answer any related questions. Please report any bugs or request new features either on this forum or on Github.
Mostapha, Leland Curtis, Reinhardt Swart and Dr. Richard Mistrick provided valuable inputs during the development of these components.
Thanks,
Sarith
Update 16th January 2017:
An example with some new components and bug fixes since the initial release announcement can be found here
…
Introduzione a Grasshopper", il primo manuale su Grasshopper.
.
I corsi PLUG IT nascono dalla volontà di promuovere le nuove tecnologie digitali di supporto alla progettazione e condividere il know-how maturato attraverso ricerca, collaborazione con i più importanti studi di architettura e pubblicazioni internazionali.
.
Verranno introdotte le nozioni base di Grasshopper approfondendo le metodologie della progettazione parametrica e le tecniche di modellazione algoritmica per la generazione di forme complesse. Il corso è rivolto a studenti e professionisti con esperienza minima nella modellazione 3D e si articolerà in lezioni teoriche ed esercitazioni.
. Argomenti trattati:
- Introduzione alla progettazione parametrica: teoria, esempi, casi studio - Grasshopper: concetti base, logica algoritmica, interfaccia grafica - Nozioni fondamentali: componenti, connessioni, data flow
- Funzioni matematiche e logiche, serie, gestione dei dati - Analisi e definizione di curve e superfici
- Definizione di griglie e pattern complessi - Trasformazioni geometriche, paneling - Attrattori, image sampler
- Data tree: gestione di dati complessi - Digital fabrication: teoria ed esempi - Nesting: scomposizione di oggetti tridimensionali in sezioni piane per macchine CNC
.
Verrà rilasciato un attestato finale.
.
Ulteriori info e programma completo su: www.arturotedeschi.com e su www.edizionilepenseur.it…
tema della modellazione parametrica con Grasshopper. Questa plug-in di Rhino consente di progettare, confrontandosi con un contesto evolutivo, attraverso la comprensione e l'utilizzo di parametri e componenti che influenzano la rappresentazione e la rendono dinamica componendo algoritmi. Nel corso verranno introdotte le nozioni base di Grasshopper approfondendo le metodologie della progettazione parametrica e le tecniche di modellazione algoritmica per la generazione di forme complesse.
Le informazioni teoriche saranno fornite in maniera accelerata ma organica e contestuale agli argomenti elencati. Per massimizzare i risultati, le lezioni saranno accompagnate da piccole esercitazioni pratiche.Argomenti trattati:- Introduzione alla progettazione parametrica: teoria, esempi, casi studio- Grasshopper: concetti base, logica algoritmica, interfaccia grafica- Nozioni fondamentali: componenti, connessioni, data flow- Funzioni matematiche e logiche, serie, gestione dei dati- Analisi e definizione di curve e superfici- Definizione di griglie e pattern complessi- Trasformazioni geometriche, paneling- Attrattori, image sampler- Data tree: gestione di dati complessiStrutturaIl corso ha una durata di 16 ore programmate nell'arco di 2 giornate con i seguenti orari: i giorni 10/11 e 11/11 dalle 10,00 alle 19,00 con pausa pranzo di un'ora.
PrerequisitiPer affrontare il corso è richiesta una conoscenza di base del software Rhino attraverso esperienze teoriche e pratiche. I partecipanti dovranno venire muniti di proprio laptop e con software Rhinoceros 5 o Rhinocero 4 perfettamente funzionanti.Alla fine del corso, verrà rilasciato l’attestato di partecipazione ad un corso qualificato certificato dalla McNeel, valido anche per l’ottenimento di crediti formativi universitari.
…
, presso la sede Manens-Tifs, nei giorni 26,27 e 28 maggio 2016.
Il comfort visivo e la gestione dell’illuminazione naturale in relazione al risparmio energetico diventano sempre più rilevanti per una progettazione innovativa degli edifici. Ad esempio, il nuovo protocollo LEED 4 riconosce crediti per le simulazioni di daylighting e conferma l’importanza degli aspetti progettuali per “collegare gli occupanti con lo spazio esterno, rinforzare i ritmi circadiani, ridurre i consumi di energia elettrica per l’illuminazione artificiale con l’introduzione della luce naturale negli spazi”. Senza strumenti software per la simulazione della luce non è possibile ottenere risultati di qualità. Radiance è un software validato, utilizzato sia a livello di ricerca che dai progettisti ed è tra i più accurati per la simulazione professionale della luce naturale e artificiale. Non ha limiti di complessità geometrica ed è adatto a essere integrato in altri software di calcolo e interfacce grafiche. Queste ultime facilitano le procedure di programmazione. Le principali e più versatili saranno oggetto del corso (DIVA4Rhino e Ladybug+ Honeybee, plug-in per Grasshopper e Rhinoceros 3D).
Il corso è rivolto a progettisti e ricercatori che vogliano acquisire strumenti pratici per la simulazione con Radiance al fine di mettere a punto e verificare le soluzioni più adatte alle proprie esigenze. Sono previste lezioni di teoria e pratica con esempi ed esercitazioni volte a coprire in modo dimostrativo ed interattivo i concetti trattati.
Le domande di iscrizione devono essere presentate entro il 12 maggio 2016.
La brochure con i contenuti del corso e tutte le informazioni sono disponibili su questo link
Il corso è sponsorizzato da Pellinindustrie.…
la plug-in Grasshopper. L'utilizzo dei due software permette di esprimere al massimo le qualità e le potenzialità della modellazione Nurbs e Mesh attraverso l'esplicitazione di algoritmi compositivi. Il corso introdurrà alle strategie di disegno digitale finalizzate alla progettazione di forme complesse utilizzando un caso studio proprio del mondo dell’architettura. Si affronterà l'intero processo di modellazione, partendo dal disegno di una superficie complessa; su questa verranno applicati algoritmi generativi per la tassellazione e la riduzione della complessità in elementi ottimizzati per la produzione. Una delle finalità del corso è quindi l’ideazione di superfici complesse, approfondendo metodi di fabbricazione digitale.
Il metodo del corso è basato sulla risoluzione di un esercizio step-by-step accompagnato da approfondimenti teorici che porteranno il partecipante all'autonomia nell'utilizzo di Rhinoceros e Grasshopper. Durante il percorso verranno illustrati applicativi avanzati del software per la pannellizzazione delle superfici (Paneling-Tools). Con il processo illustrato nel corso si vuole rendere il lavoro del progettista più facile grazie alla riduzione dei tempi che portano dal disegno dell’idea, alla costruzione delle forme.
Nella prima parte del corso verranno illustrati metodi avanzati di generazione delle superdici per una modellazione controllata delle FREE FORM. per arrivare a questa condizione sarà necessario approfondire i concetti di spazio parametrico monodimensionale (per la trasformazione lungo le curve) e spazio parametrico bidimensionale (per la trasformazione lungo le superfici).
Nella seconda parte del corso si insegneranno i metodi di esplicitazione degli algoritmi, applicati ad esercizi base utili alla comprensione di Grasshopper; poi la plug-in verrà specializzata affrontando editing, trasformazioni complesse e il problema della tassellazione delle superfici.Buona parte del tempo sarà dedicato alla costruzione di geometrie responsive e alla gestione del flusso dati per l'ottimizzazione del lavoro.…
he time to work with it.
the project is about facade strips which turns along height. the top angle is
parallel to the facade and the bottom is max. 90 degrees twisted, but the strips
should turn diffrently to achieve more dinamic look.
first i have tried to achieve this by calculating distance between the rotation angle from points of the grid and a single point.
then i have tried to ad some more effecting points and used the distance to the divided surface (the circles are just to control the area of effection):
i manually lofted it.
the result is a bit annoying becouse the points that effect the angle are always visible:
i have triend to solve this by drawing a line and divided it to recieve points along the bottom of the geometry. the result is not working properly:
Anyway,
there must be a better/smoother way to achieve this. i would like to effect the twist of the surfaces by distance to a spline, but im just lost. can you help me please?
the problems im encountering:
0- distance spline to grid to effect the angle
1- list of x/y coordinates and angle of rotation for each point of the grid
2- export points to excel
3- lofting lines in one direction only (x1, x2, x3...)
4- reduce the list data to 2 decimal (0,00)
5- maybe angle from radian to degrees
thx…
ucation Research Group in Urban Building Services at the Technical School of Architecture of Madrid (ETSAM), Spain.
The aim of the Research is to generate a digital support for sketching urban and architecture net systems and its interrelationships between them for academic researches.
IE Group Members:
-Sergio del Castillo Tello (Doctor No, Lead Programmer)
-Pablo Gómez Rodríguez (Programmer)
-Prof. Miguel Angel Gálvez
(Architect ETSAM, Building Services Department)
-Manuel Rodríguez Pérez
(Architect ETSAM, Building Services Department)
-Prof. Jose Tovar Larrucea
(Architect ETSAM, Building Services Department, Professor Ad Honorem)
The development of this tools, which are in its very early stage, is planned to take part within the Innovative Group Education research program; We expect to share the results with the community through this group as we achieve them, in case that some of you are interested, or if just want to get involved somehow. Cheers!
…
Added by Doctor No at 4:24am on September 30, 2013
thing that MicroStation does (or doesn't). The eternal debate between us is that they focus to the so called BIM aspect of things (and obviously on interoperability matters - that said IFC2*4 is" implemented" in certain Bentley verticals like BA and others) whilst I'm after assembly/component puzzles (and on that matter ... MS ...hmm... to put it politely is not exactly CATIA and/or NX, he he).
On the other hand this paranoid obsession with Level/Layer driven CAD (I hate it) defines a red thick line between CAD and MCAD - because the most intelligent importer can't emulate the way that Siemens NX/CATIA classifies objects - and without control power means nothing.
On the other hand Microstation V9 (...soon) has interesting scripting capabilities (think Modo rather Generative Components) ... meaning that Grasshopper could work there in a rather nice way. I think that I must talk for that to Ray (he recently ditched the ancient legacy MS render engine in favor for the Luxology/Nexus engine). Ray still is negative to buy Act3D mind (hope that you know the mother of visual scripting - the Quest3D VR thing).
On the other hand - within the broad AEC aspect - things these days are different (especially in fast developing countries the likes of UAE, Saudi Arabia, certain ex USSR "democracies" etc etc). Studies are outsourced even at Preliminary Design stage to various sub-contractors (they undertake the Study completion per discipline as well). This means that N separate groups doing M aspects of the whole ... meaning entropy^(N*M) - that's chaos in plain English.
With this in mind I'm quite (a lot) skeptical about the practical meaning of the whole exchange thing in AEC - at least with regard the countries mentioned (not to mention that several portions of a modern AEC thing are made via MCAD apps - chaos^chaos.
I'll back with more focused issues on that matter.
But the big question is: Grasshopper of Generative Components? Well...let's talk serious SS bikes instead: think a Ducati 1198 and a BMW S1000RR (I have them both): which is "best"? The thing is that not always the best bunny is the fasted bunny and not always the fasted bunny is the best bunny.
Cheers,
Peter
…
ty to work in a new and exciting space, where design, art, technology and fashion meet.
If you guys are looking for a full- or part-time job, or know an expert who is - we're happy to with meet him/her. We're located in the Lower East Side, New York.
What the person will be doing:
- Provide technical vision for product and infrastructure features
- Work with Marketing/Product Management to enhance the user experience
- Develop (with our team) our e-commerce customization platform
- Manage our real time 3D modeling platform
- Mentor 3D modelers and developers, define and document development methods, and share best practices
- Review and recommend improvements to product architecture
What we require:
- BA/BS/ BARCH degree OR CS/EE/Engineering degree preferred
- EXTENSIVE 3d modeling, rhino and grasshopper experience
- Experience building online computer games
- Experience creating natural and fractal patterns and forms in 3d
- UV Texture Mapping bit mapping (texture mapping)
- Experience managing a development team in projects with tight SCHEDULES
- Architecture, programing, scripting, Media or Fashion industry experience preferred
- Experience implementing web interfaces using XHTML, CSS, Javascript, and AJAX
- Experience in recommendation engines and algorithms
- Interest in working in an early stage fast-paced environment…