r).
http://www.agrob-buchtal.de/en/cd/produkte/produkte_seiten_13045.ht...
2. 1 puts some "modular Z" increment puzzles (for more than obvious reasons). Additionally the excavation cost VS any ECO-benefits ... (heat exchangers in the foundation blah blah). OK that means that the footprint it's also modular., not to mention the whole composition (potentially).
3. So: use the projection ONLY for defining where a given footprint meets the terrain (see the yellow and blue things in V2) and then LOFT pairs (see PlanA, B) of profiles into 2 DISTINCT portions ("solids" so to speak): (a) the basement (or at least something where some potential partitions could being classified as "underground" spaces), (b) the classic building.
4. By doing 3 ... keep an eye on 2 as well (Don't forget the classic minor terrain "adjustments" around each building (meaning usage or "tmp" solids), access roads/pavements (ditto), potential connection of basements (parking), soil stabilization issues, bad seismic behavior on unevenly(Z) formed basements etc etc).…
tting-edge results at the interface of geometry processing and architectural design. Scientific chairs of the conference are Lars Hesselgren, Shrikant Sharma, and Johannes Wallner. Keynote speakers are: Pierre Alliez, INRIA Sophia-Antipolis Philip Ball, Physicist and science writer Chuck Hoberman, Hoberman Associates Jan Knippers, Knippers Helbig Advanced Engineering
We are happy to announce that public lectures will be held by Toyo Ito and Mutsuro Sasaki. The organization is cordially inviting you to contribute a paper or a workshop, or simply to visit. More details concerning registration and submission can be found on the conference web page at http://aag12.architecturalgeometry.at/. The submission deadline has recently been extended.
This conference receives funding from the ECs Seventh Framework Programme under grant agreement number 230520. Thanks to this funding we are able to cover the registration fees and support the travel expenses of 20 young participants. Places will be distributed among those who submit a poster, paper or workshop proposal.…
hopper no requiere de conocimientos de programación o scripting para permitir al diseñador trabajar de forma generativa y paramétrica. No son necesarios conocimientos previos de Grasshopper pero sí de Rhino a nivel básico.
Controlmad es Centro Formador Autorizado Rhinoceros y Rhino fab Studio.
Nuestros profesores son Instructores Autorizados Rhinoceros con experiencia universitaria, nacional e internacional.
El curso y los ejercicios a desarrollar están enfocados a diseñadores, arquitectos, ingenieros y estudiantes.
En este curso introductorio el alumno se familiarizará con términos básicos de la estructura de Grasshopper, como “listas de datos”, “dominios”, “estructuras en árbol”, etc.
Es un curso de 18 horas, con el que se pretende entrar en la lógica de trabajo de Grasshopper mediante diversos ejercicios, de forma que el alumno sea capaz posteriormente de desarrollar sus propias gramáticas, con la confianza que da comprender los términos básicos de programación sobre los que se apoya todo el sistema de trabajo de Grasshopper.Para este curso no son necesarios conocimientos previos de Grasshopper, pero sí de Rhino (a nivel básico).
También se vincula el programa con la impresión 3D aprendiendo a exportar archivos desde Grasshopper con los requisitos mínimos de impresión 3D. Se realizará una demo de impresión en el aula.
El primer día del curso se le facilita al alumno un manual-tutorial con los ejercicios a realizar, en PDF.
A la finalización del curso, y siempre que el alumno haya asistido al 80% de las clases, se le otorgará un diploma oficial acreditativo del curso.
Fechas: 5, 6, 12 y 13 de marzo
Horario: sábado y domingo 16 - 20,30h (Madrid, CET)
Lugar: Sesiones On-line en directo a través de nuestra plataforma online.controlmad.com
…
creating the structural frame, finding the endpoints, linking these endpoints with curves and afterwards lofting the surfaces between the curves.
The results were quite nice, however, the procedure is very time consuming and inefficient. There is just too much copy-pasting involved.
(see attached file: "Old Attempts.zip" )
Mesh relaxation:
I have later on used Daniel Piker's tutorials on Mesh Relaxation and realized that this might be the way to go.
The link to these online tutorials on wewanttolearn.net is:
https://wewanttolearn.wordpress.com/2011/10/22/mesh-relaxation-kangaroo-tutorial/
His tutorials, however, only deal with mesh boxes which are ideal cubes. He then joins them together in various directions, but it is under 90 degrees angle.
( see attached file: "Daniel Pikers Examples" )
What I would like to achieve:
I want my bridges to go in all directions and angles, not just under 90 degree angle.
Ideally I would like to make a square (polygon) follow a curve (which moves in all axis) at certain number of division points. I would then loft these squares into a mesh and use that shape as a mesh box. I would later use this mesh box and relax it the same way as Daniel Piker used the cubes in his tutorial. The anchor points are only the vertices of the squares which create the lofted mesh box.
( see attached file: "New Attempts" )
As you can see below this procedure works even if the curve is moving in all directions not only along xy axis. There are, however, many problems connected to it.
The problem:
Despite all the effort I cannot seem to come up with a design where I would be able to draw a random curve which would be the guideline for my mesh box and then apply this box to one definition in order to relax the mesh and create the shape that I want. Without this I am again forced into a lot of copy pasting as the final mesh box is made out of several sections.
Also is there any way I could make the final resulting mesh a bit smoother? Increasing the number of mesh faces is probably the only way, right?
Thank you guys so much for any potential help.
All best,
Luka
…
he Cordyceps. Maybe some of you find this helpful/useful.
So basically, the Cordyceps is a physical module with 4 knobs and 1 slider. The knobs give an output between 1 and 1000, while the physical slider outputs 0-359. And of course, for this physical module I wrote a plugin to communicate with it. The knobs are intended to be the variables that modifies the design, while the physical slider is intended to be connected to the camera component.
Here I will put up "the recipe" for all to make their own module. You will be able to download the plugin as well.
Please send me a message if you want the 3D-files for the knobs, the box and slider knob. They've been made to directly 3D-print.
Plugin:
https://github.com/zakadjeb/Cordyceps/blob/master/Cordyceps/Cordyce...
Code for Arduino IDE:
https://github.com/zakadjeb/Cordyceps/blob/master/Arduino/_Arduino_...
What you need:
1x - Arduino (Leonardo, UNO or whatever)
4x - Potentiometers
1x - Sliding potentiometer
1x - Breadboard
Bundle of jump wires.
1. So, a potentiometer is a variable resistor, which is basically a component that changes the resistance between the voltage and the ground.
If A is supplied with 5V then B must be connected to Ground. The W will give "read" the resistance, and thus should be placed in Analog input (A0-A5) on the Arduino. The slider potentiometer works the same way.
2. Now connect the 4 pots to each their Analog input. The slider is supposed to be in A4. So to make sure:
A0: Knob1
A1: Knob2
A2: Knob3
A3: Knob4
A4: Slider
3. Now it's time to connect the voltage! Using the breadboard, the voltage can be sent through 1 line, the Ground as well. It should be quite easy to connect them.
4. Now, download the Arduino IDE and copy-paste the code I supplied above. In the IDE, you need to let it know which Arduino you're working with, and which port is should send the script.
5. Almost there. Download the plugin. Open the port you're using through the plugin. Set Start to True and the Cordyceps should be within you.
This recipe will be updated!
Let me know if there are any issues.
// Zakaria Djebbara…
he Cordyceps. Maybe some of you find this helpful/useful.
So basically, the Cordyceps is a physical module with 4 knobs and 1 slider. The knobs give an output between 1 and 1000, while the physical slider outputs 0-359. And of course, for this physical module I wrote a plugin to communicate with it. The knobs are intended to be the variables that modifies the design, while the physical slider is intended to be connected to the camera component.
Here I will put up "the recipe" for all to make their own module. You will be able to download the plugin as well.
Please send me a message if you want the 3D-files for the knobs, the box and slider knob. They've been made to directly 3D-print.
Plugin:
https://github.com/zakadjeb/Cordyceps/blob/master/Cordyceps/Cordyce...
Code for Arduino IDE:
https://github.com/zakadjeb/Cordyceps/blob/master/Arduino/_Arduino_...
What you need:
1x - Arduino (Leonardo, UNO or whatever)
4x - Potentiometers
1x - Sliding potentiometer
1x - Breadboard
Bundle of jump wires.
1. So, a potentiometer is a variable resistor, which is basically a component that changes the resistance between the voltage and the ground.
If A is supplied with 5V then B must be connected to Ground. The W will give "read" the resistance, and thus should be placed in Analog input (A0-A5) on the Arduino. The slider potentiometer works the same way.
2. Now connect the 4 pots to each their Analog input. The slider is supposed to be in A4. So to make sure:
A0: Knob1
A1: Knob2
A2: Knob3
A3: Knob4
A4: Slider
3. Now it's time to connect the voltage! Using the breadboard, the voltage can be sent through 1 line, the Ground as well. It should be quite easy to connect them.
4. Now, download the Arduino IDE and copy-paste the code I supplied above. In the IDE, you need to let it know which Arduino you're working with, and which port is should send the script.
5. Almost there. Download the plugin. Open the port you're using through the plugin. Set Start to True and the Cordyceps should be within you.
This recipe will be updated!
Let me know if there are any issues.
// Zakaria Djebbara…
/stackoverflow.com/questions/7735036/naudio-frequency-band-in...
http://stackoverflow.com/questions/17222492/how-to-change-frequency...;
I am no expert in this field; I would have to do research just like you. Maybe someone else on this forum has already done more work in this area, let's see. Or it might be you, the first one :)
This does not look like something completely at reach for someone with not much programming experience, but maybe with some guidance it could be doable.
--
>>Do you know other libraries that I can use with it?Sorry I would have to search for other libraries just like you.
EDIT: This link has a simple sine wave written from scratch. It might be a good start to mix with the code above and a playground to understand theory.
Giulio--Giulio Piacentinofor Robert McNeel & Associatesgiulio@mcneel.com…
ntage...
This is a standard mesh to nurbs conversion result: http://www.tsplines.com/j/subdtonurbs/MeshToNurbsBoatShell.png
You want to start with a proper mesh reparametrization:
http://www3.cs.stonybrook.edu/~gu/software/RiemannMapper/figures/ti...
Once you have your mesh reparametrized it's relatively easy to divide it into surfaces. That is the easiest approach but it doesn't take into account any features(creases etc)...
This illustrates a nice mesh parametrization with features.
https://www.graphics.rwth-aachen.de/media/paper_images/qgp_340.png
EDIT:
Got a brief look at the Geomagic thingy... seems like it's a subd modeler (like tsplines). Creating nurbs out of subd meshes is easy cause you can basically trace back the subdivision. With Giulios help I was able to make a rough version of that process here: http://www.grasshopper3d.com/forum/topics/skeletal-mesh?commentId=2985220%3AComment%3A558193 ;
(the point is that subd meshes to nurbs are not as much challenging as mesh to nurbs).…
: Castellano
Horarios
Básico - miércoles
18.30 - 21.30 h
Avanzado - miércoles
15.00 - 18.00 h
Una vez finalizado el curso, el alumno podrá solicitar un diploma acreditativo del mismo.
Normativa: http://daetsam.aq.upm.es/servicios/cursos/informacion
Información cursos: http://daetsam.aq.upm.es/servicios/cursos/primavera2014
Métodos de pago: http://daetsam.aq.upm.es/noticias/2014/02/16/cursos-primavera-2014-aplicaciones-informaticas-e-idiomas
…