e and i get it. If you have time check the attached papers we published a while ago in relation to the contribution of thermal mass in the reduction of temperature in residential buildings. See the nice contribution of the heavy TM or the lower one for light TM.
As for the solarHeatCapacity, your description (of the 50W) is derived on a 1 Facade/Floor ratio and fully glazed. The only way to reduce it is to increase the ratio (bigger facade area). Which is not recommended (energy losses), but this is a different issue. So, roughly, we can say that 50 is the lower value. If i have less glazing area this number will be higher (right?)
I want to define a value list of "architectural situations", so it is easy to explain and understand. One situation can be:
"Ratio facade/floor 1 & Fully glazed" = 50
"Ratio facade/floor 1 & Half glazed" = 75
"Ratio facade/floor 1.5 & Fully glazed" = 30
"Ratio facade/floor 1.5 & Half glazed" = 50
"Ratio facade/floor 0.75 & Fully glazed" = 70
"Ratio facade/floor 0.75 & Half glazed" = 90
Makes sense for you something like this?
I also defined a value list for the timeConstant like this:
Light Building (Mobile home) = 1Medium-light building (Cement tiles on floor) = 4Semi Heavy Building (Concrete floor + Tiles) = 8Heavy Building (Concrete floors/ceilings + Heavy external and internal walls) = 12
As for the first 5-10 cm effective TM in general my assumption is that you take half of the mass to your space and half to the space above/below you. Will be interesting to do a parametric study on just the thermal mass, uninsulated and insulated to see what the depth limits effectivity will be. Interested in doing such a study together? Can be a nice work even for publishing.
Thanks a lot ... again,
-A.…
393&xg_source=activity
In this case we see a geometrically approach, which doesn’t works efficient, because it required knowing how they behaviors together before, and I think it is not the ‘really behaves’.
To make the structure ‘really behaves’ I tried use kangaroo and the result works very well! As you can see I simply give the 2-set reverse UForce, and then they start to rotate until they found their equilibrium. That means 90 degree rotation. I was wondering what we can do to make a endless-rotation. I am mean 360 degree or more like this:
https://www.youtube.com/watch?v=4owFczeqqMQ
By the way, I try to give supports which allow a horizontal movement only (Just curious how we could keep the anchor-movement horizontally and in the same layer, for example like usual supports for compression ring…). I use the AnchorXYZ, but Kangaroo-Engine seems don’t accept its output.
So maybe some one knows a better solution?
…
Added by Jon to Kangaroo at 7:40am on March 11, 2014
problem later) to fit more shapes that are otherwise won't fit in.
On the example below horizontal rectangle couldn't fit in but its rotated analog could and thus was placed in.
Later, when placed shapes are used to generate frames, because of this rotation, the position of the starting points changes and because of the approach I use to generate the frames some angle values are attached to the wrong corners, this brakes the frame shape and looks like this (on the left the frame of sick shape and on the right the frame of the healthy shape):
Again, this happens because the angle values are assigned to the specific corners (points) and previously rotated shapes get these all messed up:
Easy fix, don't rotate the shapes, problem is, I've already baked a good number of them for later use. I'd like to avoid regeneration because it takes a lot of time and without rotation I constrict the algorithm even more.
Better fix, use a different approach, this is where I'd like to hear suggestions and kicks in a right direction. Please take a look at my definition. It works but I have a feeling like giving an amputee a job of sweeping the floor.
…
ns. but first allow me to explain what i'm trying to do: i have a serial device i want to talk to, but i have to do it using some sort of handshaking. for instance, when i send a command/data, i need to wait for an appropriate response before sending another. i have used andy payne's general serial components from firefly, but i don't think they'll work for what i want to do, and in general, i want to know how to do this from scratch. i'm using the pyserial library to do the comm, and i can get it to work within one script. here's an example of a working (mostly) port open/close script (x=input param for baud, y=input param for port name, z=boolean input param for open/close):
import serialmyPort=serial.Serial()myPort.baudrate = xmyPort.port = yif z == True: try: myPort.open() except: print "Something went wrong. Cannot open port." if myPort.isOpen() == True: print myPort.name + " is open" if z != True: try: myPort.close() except: print "Something went wrong. Cannot close port." if myPort.isOpen != True: print myPort.name + " is closed"
this all works well and good. here are my questions:
1) I can open the port and then close it. however, if i try to re-open it, i get an access denied error. it seems rhino is holding the port open, as i have to re-start rhino to get it working again. i read through the discussions and didn't see any definitive answers to this problem. any advice?
2) I'd like to share this port with other components (or at least break up the functions of opening/closing the port and read/write, not unlike how the firefly components are organized), but i have no idea how to share an object instance between components. i did see that there is a sticky dict and tried to add myPort to it, but i kept getting errors in the other component when i try to use the object's methods. for instance:
Component 1 Script:
import serial
import scriptcontext
myPort=serial.Serial("COM4", 9600)
scriptcontext.sticky['myPort']=myPort
Component 2 Script:
import serial
import scriptcontext
myPort=scriptcontext.sticky['myPort']
print myPort.read()
but i get messages like:
Runtime error (MissingMemberException): 'Serial' object has no attribute '_port_handle'
any assistance would be greatly appreciated!!
best,
~BB~…
io, alle ore 19:30 presso la Mediateca MARTE di Cava de’ Tirreni (Sa), la lecture magistralis dell’arch. Walter Nicolino dal titolo “Augmented visions / Responsive spaces”, un viaggio culturale che, attraversando gli studi progettuali a diverse scale condotti tra la sede torinese e il centro ricerca di Boston, mette in luce una attitudine nell’indagare e nel dar forma alle interazioni tra le persone, gli oggetti e gli spazi, al fine di fornire possibili risposte alle nuove istanze poste dalla rivoluzione digitale.
In apertura i saluti istituzionali del sindaco Marco Galdi, mentre a introdurre la lecture l’arch. Amleto Picerno, promotore del Mediterranean FabLab di Cava de’ Tirreni e tutor della Summer School digitalMed, il laboratorio progettuale che da quattro anni a questa parte, indaga temi, pratiche e tecniche dell’attuale panorama architettonico internazionale. È la smart city al centro della IV edizione di Summer School Digitalmed 2013, che si svolge a Salerno dal 22 al 28 luglio con l’obiettivo di creare un sistema di relazioni e di interazioni continue tra la città, le persone e l’ambiente in cui queste si rapportano in un continuo scambio di informazioni.
Ad esprimere la critic ai prototipi di progetto che emergeranno dal workshop digitalMed, sarà proprio Walter Nicolino, architetto di spicco del panorama italiano, coinvolto in numerosi progetti di ricerca al Senseable City Lab del MIT di Boston, insieme all’arch. Carlo Ratti con cui è fondatore e socio dello studio torinese CARLORATTIASSOCIATI.
Il 26 luglio lo space 1.0 della Mediateca MARTE di Cava de’ Tirreni si fa, dunque, arena d’avanguardia per un interessante dibattito durante il quale, a proposito della Summer School digitalMed, si ragionerà anche sul modo in cui le tecnologie digitali influenzano l’architettura.
«Da qualche tempo a questa parte possiamo scegliere se orientarci alla perfezione tramite navigatori GPS o perderci come sognanti flâneur metropolitani; possiamo associare in un batter d'occhio infiniti layers di dati a un luogo, oppure contemplarne in silenzio il paesaggio; possiamo anticipare la realtà con sofisticate rappresentazioni virtuali, oppure esercitarci in giocose autocostruzioni partecipate.
Possiamo avere l'una e l'altra cosa: non si tratta di una scelta tra il mondo reale e quello virtuale, come predetto da parte della letteratura agli albori dell’era digitale, ma si tratta di capire come il nostro ambiente costruito e gli spazi in cui viviamo stiano imparando a parlare un nuovo linguaggio e ad interagire in modo sempre maggiore con le persone - afferma Walter Nicolino che parafrasando Le Corbusier “La civilisation digitale cherche et trouvera son expression architecturale”, sottolinea l’importanza di integrare le nuove tecnologie e radici locali senza perdere la visione e la dimensione umana della città: All’architettura è richiesta una revisione dei propri strumenti per creare spazi flessibili, inclusivi, in grado di adattarsi ai nuovi modi di vivere e lavorare e di rispondere in modo interattivo alle nostre esigenze».
…
ppresentazione di modelli per l’architettura ed il design, verso un apprendimento d' alto livello delle tecniche di modellazione parametrica 3D.
Il corso si svolgerà nei seguenti giorni:
Sabato 19/10 dalle 10.00 alle 19.00
Domenica 20/10 dalle 10.00 alle 19.00
Scadenza preiscrizione: 16/10
Contenuti
Durante questo corso, attraverso l' uso di tecniche avanzate di modellazione Nurbs,
si potranno costruire modelli tridimensionali complessi che permetteranno di comprendere le tematiche legate alle forme complesse dell’architettura.
Particolare attenzione verrà data allo studio delle superfici a doppia curvatura, alle superfici rigate e alle superfici sviluppabili, quest’ultime adatte alla creazione di manufatti rivolti alla produzione. Allo studio delle superfici sarà affiancata la logica della loro tassellazione, quindi il passaggio da entità continue ad entità discrete, indagandone il valore attraverso esercitazioni pratiche.
Per comprendere meglio le finalità pratiche della tassellazione verrà adoperata una plug-in integrativa specifica per questo tipo di operazione: Paneling Tools. Le lezioni pratiche saranno arricchite da brevi comunicazioni teoriche utili a perseguire l’obiettivo della costruzione di modelli complessi. Sintesi programma
Costruzione di superfici free-form facilmente editabili attraverso tecniche di sculpting ed una gabbia adeguata di punti di controllo;
Presentazione e spiegazione delle superfici a doppia curvatura, rigate, sviluppabili e loro pannellizzazione attraverso elementi lineari o tasselli piani;
Studio della tassellazione attraverso la plug-in Paneling Tools per lo sviluppo di tasselli tridimensionali complessi;
Modellazione di un'architettura complessa, costruita avvalendosi della anche della tecnica del morphing.
Preparazione della mesh e del file per il rendering.
Alla fine del corso, verrà rilasciato l’attestato di partecipazione ad un corso di Rhinoceros qualificato e certificato dalla casa sviluppatrice McNeel, valido anche per la richiesta di crediti formativi universitari.
Docente del corso
Il corso è tenuto da un docente qualificato, con riconosciuta esperienza universitaria, esperto in disegno e rappresentazione dell' architettura e del design ed istruttore McNeel:
Michele Calvano|_architetto, dottore di ricerca in rappresentazione architettonica specializzato nella modellazione matematica (Nurbs) e modellazione parametrica.
Docente ART (Autorized Rhino Trainer) - [vedi CV]
Info
Per ulteriori informazioni di carattere didattico sono a disposizione i seguenti contatti: Responsabile didattico: arch. Michele Calvano
Info mail: parametricart@gmail.com
cell: 340 3476330
…
hopper no requiere de conocimientos de programación o scripting para permitir al diseñador trabajar de forma generativa y paramétrica. No son necesarios conocimientos previos de Grasshopper pero sí de Rhino a nivel básico.
Controlmad es Centro Formador Autorizado Rhinoceros y Rhino fab Studio.
Nuestros profesores son Instructores Autorizados Rhinoceros con experiencia universitaria, nacional e internacional.
El curso y los ejercicios a desarrollar están enfocados a diseñadores, arquitectos, ingenieros y estudiantes.
En este curso introductorio el alumno se familiarizará con términos básicos de la estructura de Grasshopper, como “listas de datos”, “dominios”, “estructuras en árbol”, etc.
Es un curso de 18 horas, con el que se pretende entrar en la lógica de trabajo de Grasshopper mediante diversos ejercicios, de forma que el alumno sea capaz posteriormente de desarrollar sus propias gramáticas, con la confianza que da comprender los términos básicos de programación sobre los que se apoya todo el sistema de trabajo de Grasshopper.Para este curso no son necesarios conocimientos previos de Grasshopper, pero sí de Rhino (a nivel básico).
También se vincula el programa con la impresión 3D aprendiendo a exportar archivos desde Grasshopper con los requisitos mínimos de impresión 3D. Se realizará una demo de impresión en el aula.
El primer día del curso se le facilita al alumno un manual-tutorial con los ejercicios a realizar, en PDF.
A la finalización del curso, y siempre que el alumno haya asistido al 80% de las clases, se le otorgará un diploma oficial acreditativo del curso.
Fechas: 5, 6, 12 y 13 de marzo
Horario: sábado y domingo 16 - 20,30h (Madrid, CET)
Lugar: Sesiones On-line en directo a través de nuestra plataforma online.controlmad.com
…
creating the structural frame, finding the endpoints, linking these endpoints with curves and afterwards lofting the surfaces between the curves.
The results were quite nice, however, the procedure is very time consuming and inefficient. There is just too much copy-pasting involved.
(see attached file: "Old Attempts.zip" )
Mesh relaxation:
I have later on used Daniel Piker's tutorials on Mesh Relaxation and realized that this might be the way to go.
The link to these online tutorials on wewanttolearn.net is:
https://wewanttolearn.wordpress.com/2011/10/22/mesh-relaxation-kangaroo-tutorial/
His tutorials, however, only deal with mesh boxes which are ideal cubes. He then joins them together in various directions, but it is under 90 degrees angle.
( see attached file: "Daniel Pikers Examples" )
What I would like to achieve:
I want my bridges to go in all directions and angles, not just under 90 degree angle.
Ideally I would like to make a square (polygon) follow a curve (which moves in all axis) at certain number of division points. I would then loft these squares into a mesh and use that shape as a mesh box. I would later use this mesh box and relax it the same way as Daniel Piker used the cubes in his tutorial. The anchor points are only the vertices of the squares which create the lofted mesh box.
( see attached file: "New Attempts" )
As you can see below this procedure works even if the curve is moving in all directions not only along xy axis. There are, however, many problems connected to it.
The problem:
Despite all the effort I cannot seem to come up with a design where I would be able to draw a random curve which would be the guideline for my mesh box and then apply this box to one definition in order to relax the mesh and create the shape that I want. Without this I am again forced into a lot of copy pasting as the final mesh box is made out of several sections.
Also is there any way I could make the final resulting mesh a bit smoother? Increasing the number of mesh faces is probably the only way, right?
Thank you guys so much for any potential help.
All best,
Luka
…
ur setup. Can you say what sensor you are using? Are you using an Arduino to write this ascii information to the serial port? If so, there may be some formatting code for the string that you'll need to do to get the Read component to function properly. I see that you were able to open the port and Start reading... so my first thought is that the data is formatted correctly....
All of the read components look for a specific character (in this case two characters) to indicate when it has reached the end of the line being read and should spit out the data. In this case, Firefly uses the Carriage Return (\r) and Line Feed (\n) to know when it has reached the end of the line. In arduino, these are automatically added to any line if you use the Serial.println("blah, blah, blah"); command. Notice, this is different from the Serial.print("nothing to see here"); command. This doesn't mean that you can't still use the regular print command... it's just you need to use the println command to indicate when you've reached the end of the line. Let's take a look at a simple example.
void setup() { Serial.begin(9600);}void loop() { int sensorValue = analogRead(A0); Serial.print("The value of the sensor is: "); Serial.println(sensorValue);
delay(20); // important to wait some small time so you aren't sending just a ton of info over to GH which will cause it to crash :(
}
The first print statement prints a string to the serial port... and the next one adds the current sensor value... and THEN adds the carriage return and line feed to start a new line. The nice thing about using these together is that you can concatenate any type of data you want. If you were to upload this sketch, you should see a sentence being printed to the serial port that says "The value of the sensor is: 512". I made up the number, but you get the idea. Notice, I also had to include a delay function. You don't always need this (there are other ways to go about this) but the important thing to note is that the loop cycle on the Arduino can run really fast. I mean... really fast. So, you wont want to send so much data over to GH, because this could flood the string buffer in the Read component and cause it to crash (eventually). It's a good idea to add some small time interval just to slow it down a bit. I should say that I've optimized the refresh rate in the next release so it's significantly faster... so hopefully this wont be as big of a problem... but hopefully that helps some.
Now... Why are you writing data to a sensor? Sensors by default are considered inputs... so I'm quite confused as to why you would want to send data back (if you are... then you need some way to handle the string data being sent from GH... this is the whole reason we built the Firefly firmata... it sets up the two-way protocol so you don't have to deal with all of that mess... If you're going to read and write, you're better off just uploading the firmata and using the Uno Read and Write components). Also, I'm not very familiar with the Hyperterm or Advanced Serial Port Terminal... but I will say that could get COM conflicts if you're trying to open the port with different tools. Anyway, I hope some of this helps you get up and running.
Cheers,
Andy
…
he Cordyceps. Maybe some of you find this helpful/useful.
So basically, the Cordyceps is a physical module with 4 knobs and 1 slider. The knobs give an output between 1 and 1000, while the physical slider outputs 0-359. And of course, for this physical module I wrote a plugin to communicate with it. The knobs are intended to be the variables that modifies the design, while the physical slider is intended to be connected to the camera component.
Here I will put up "the recipe" for all to make their own module. You will be able to download the plugin as well.
Please send me a message if you want the 3D-files for the knobs, the box and slider knob. They've been made to directly 3D-print.
Plugin:
https://github.com/zakadjeb/Cordyceps/blob/master/Cordyceps/Cordyce...
Code for Arduino IDE:
https://github.com/zakadjeb/Cordyceps/blob/master/Arduino/_Arduino_...
What you need:
1x - Arduino (Leonardo, UNO or whatever)
4x - Potentiometers
1x - Sliding potentiometer
1x - Breadboard
Bundle of jump wires.
1. So, a potentiometer is a variable resistor, which is basically a component that changes the resistance between the voltage and the ground.
If A is supplied with 5V then B must be connected to Ground. The W will give "read" the resistance, and thus should be placed in Analog input (A0-A5) on the Arduino. The slider potentiometer works the same way.
2. Now connect the 4 pots to each their Analog input. The slider is supposed to be in A4. So to make sure:
A0: Knob1
A1: Knob2
A2: Knob3
A3: Knob4
A4: Slider
3. Now it's time to connect the voltage! Using the breadboard, the voltage can be sent through 1 line, the Ground as well. It should be quite easy to connect them.
4. Now, download the Arduino IDE and copy-paste the code I supplied above. In the IDE, you need to let it know which Arduino you're working with, and which port is should send the script.
5. Almost there. Download the plugin. Open the port you're using through the plugin. Set Start to True and the Cordyceps should be within you.
This recipe will be updated!
Let me know if there are any issues.
// Zakaria Djebbara…