algorithmic modeling for Rhino
scissor structure in karamba
Welcome colleagues
if you can you please help with an error occurs in the algorithm
Grasshopper gives the following error
error
1. Singular Stiffness-matrix: Can not solve static system.
Make sure that boundary conditions are set so that the structure can not move in rigid body modes.
When you analyze a flat shell structure lock the rotation perpendicular to the plate in at least one node.
Use the 'Eigen Modes'-component and activate the display of local coordinate axes: The first eigenmode will be the rigid body motion.
Views: 888
- Attachments:
-
-
SCISSOR1.gh, 33 KB
-
Replies to This Discussion
-
Permalink Reply by Karamba3D on
-
Hi,
your structure consists of eight unconnected parts which causes kinematic modes (see attached definition). In Karamba elements are connected at their end- or corner points only.
There is a definition with a scissor structure in the examples that come with Karamba.
Best,
Clemens
- Attachments:
-
-
SCISSOR1_CP.gh, 39 KB
-
-
About
Welcome to
Grasshopper
Translate
Search
Photos
Videos
-
Scaling Tower
Added by Parametric House 0 Comments 0 Likes
-
Field Trap
Added by Parametric House 0 Comments 0 Likes
-
Subd Bridge
Added by Parametric House 0 Comments 0 Likes
© 2024 Created by Scott Davidson.
Powered by
