how to make different shapes go along with a line and fixed at that line?

Replies to This Discussion

Permalink Reply by Luca Ottaviani on February 11, 2010 at 3:09am

Hi Jim,
I don't understand what you want obtain exactly, but I think this can help you.
Luca

Attachments:

• Immagine.jpg, 172 KB

Permalink Reply by Jim choo on February 12, 2010 at 1:27pm

thanks, that's exactly what I want.

Permalink Reply by Luca Ottaviani on February 12, 2010 at 3:36pm

Perfect...I'm happy to have been helpful to you.
Luca

Permalink Reply by Jim choo on February 14, 2010 at 9:17pm

I changed those rectangles into boxes, the definition won't work. is there anywhere should be altered?

Permalink Reply by Luca Ottaviani on February 15, 2010 at 2:51am

No,as you can see from the image that I attached,the def should work fine!
Luca

Attachments:

• 4.jpg, 180 KB

Permalink Reply by Luca Ottaviani on February 15, 2010 at 5:43am

Oooops....excuse me,you have told me boxes.You have to add another component(Box/Evaluate Box).See the image.

Attachments:

• 5.jpg, 120 KB

Permalink Reply by Jim choo on February 16, 2010 at 9:44am

one more question on this, is there any possibility that I could decide one specific box goes to one specific point? for example, I'd like the 3rd box fixed on the 1st point, and the 5th box fixed on the 2nd point.

Permalink Reply by Luca Ottaviani on February 16, 2010 at 12:05pm

Jim, in the file that I have previously attached (4.jpg) you can see the order of disposition on the curve (box number one on point number 1 ecc.ecc)
If you change the order when you set the geometries (as multiple geometries),it change also the disposition on the curve.
Luca

Permalink Reply by Jim choo on February 16, 2010 at 1:53pm

all clear, thank you so much~~