Just want to cap the bottom of the structure!

Replies to This Discussion

Permalink Reply by ng5 Alex on June 1, 2014 at 11:26am

tab surface/utilities/cap holes component ? for both holes.

otherwise for the bottom hole only if the base bottom curve is planar you can use the boundary surfaces component from the surfaces freeform tab. this will output a surface you can then join, brep join component, it with the loft you already have.

cheers

alex

Permalink Reply by Carol Magliari on June 2, 2014 at 7:18pm

Hey Alex thanks for the tips!

I used cap holes, than used deconstruct brep and pickep up the item 1 of a list item of the faces (the bottom of the construction), and than joined this item with the loft that I've made before using join brep!