How to set schedule of dehumidification?

Hi,

I am running an EP simulation about a detached house with ideal air loads to calculate the annual thermal load.

The house is located in Tokyo and it needs a dehumidifier and air conditioner during summer because of the relative humidity of outdoor air will be over 80%.

I want to set the schedule like this

1) cooling setpoint to be 27C degree and max humidity to be 50%.

2) when the outdoor air temperature is lower than 27C, open the windows and ventilation naturally.

3) Air conditioning and dehumidification are needed only when the occupancies are at home (almost at night) and Natural ventilation is not to be.

4) Accept the indoor air relative humidity to be almost 100% when dry bulb temperature is lower than 27C.

Now, I set the air conditioning schedule as cooling setpoint schedule, but there are no components to set a dehumidification setpoint schedule.

The dehumidifier keeps working all day whichever the windows are opening or not.

How can I stop the dehumidifier during the windows open?

thank you.