Align Curve to surface

Hello,

Let's say we have a list of 6 curves and 6 planes on grasshopper's main canvas. (on the picture they are baked to make it clearer)

Could you advise me how to align curves to those planes as on the image below? I mean by centers. The thing is that I don't want to do it manually one by one, but it should act automatically.

Thanks, I would be very grateful for some help as I should present it on thursday.

Attachments:

align.jpg, 56 KB

Replies to This Discussion

Permalink Reply by Danny Boyes on July 7, 2010 at 7:42am

In version 0.6.00059 you can use the method outlined below (you may need to alter your planes by either rotating them or re configuring them but the principle is the same.

If you're using v0.7.00030 then there is a bug in the Orient Component which should effectively do what you want, transform your curves from a plane, set at their center points, to a new target plane both moving and rotating the curves. So you will have to do a work around if you need to rotate the curves as well as moving them. If you simply wish to move them like your image suggests then this should work.