of a hack to push it to an android device, and you can't use labels, which is a very bad point!
...
I won't buy an Iphone!
The other is Control OSC. It looks rougher, but it has a lot of advantages to me.
+ Game of Life included!
+ you can use and update labels :))
+ Has a nice muti touch widget unfeatured in touch osc
+ You can script the interface using java script manipulation in gh, stream it to your dropbox and update in one "tap", as follows
Does anyone have experience with scripting interfaces for this software? I'm stuck already. I know nothing of java script to begin with. As you can see I managed to format the labels but the osc message I could not find a way, it stays untouched.
Just in case someone knows better, here are my "objects" (I said that right?). The userXXX are replaced in GH.
{ "name":"userName", "type":"Slider", "x":(xPadding + .11), "y": yPadding, "width":.82, "height":.082, "color":"userColor", "min":userMin, "max":userMax, "ontouchmove" : "var roundedvalue = this.value.toFixed(userFix); LbluserName2.changeValue(roundedvalue)", "onvaluechange": "oscManager.sendOSC('/userName', 'f', this.value.toFixed(userFix))",},{ "name":"LbluserName1", "type":"Label", "x":xPadding, "y": yPadding, "width":.1, "height":.05, "color":"userColor", "value": "userName"},{ "name":"LbluserName2", "type":"Label", "x":xPadding, "y": (yPadding + 0.05), "width":.1, "height":.05, "address":"/userName", "color":"userColor", "value": 0},…
eaningful. Humans must interact with it. Information arises when humans examine the data. Knowledge is created when information is transformed through human social interactions.”
Richard Gayle via spacecollective
The space in which we live can be monitored in many aspects and appears to be to be a gradient of data in continuous evolution and change. One of the major advantages of parametric tools is to be able to inform the design processes with accurate, specific and variable, in space and time, data streams .
DATA BODIES is a Grasshopper workshop that will focus on how its nature as an information processor and how it can be (ab)used in order to manipulate data, streaming inputs from various sources and use datafeeds to inform geometry or data structures from the very simple up to more complex ones. The aim is to give an understanding of information and data articultion as already a spatial and architectural operation; results may range from pure data communication protocols, dataviz or data-driven geometries depending on the skill levels and aspirations of each participant. The brief is also open to the suggestions and opportunities that may rise during the workflow.
DETAILS: http://www.superbelleville.org/dataworkshop/…
them can be addressed before winter.
Bugs:
. Vector preview is great, but it doesn't refresh (clear) when you disconnect components. You must delete the component or reconnect to refresh the vector previews.
. When passing values through a note pad, note pad fails to update continuously. Moving the notepad updates the display.
. Cannot pass a notepad integer into an fx1
. Point preview in RH5 appears as large red blocks, not as red crosses. (This is an old bug, may have been fixed with RH5 update in the meantime.)
. After adjusting Graph in dialog box, graph appears to be a solid grey object until moved.
. After copying and pasting, a lot of components are broken, return nulls. Requires reconnect to recompute (haven't had this problem in a while, will see if I can find a file that recreates it)
. BIG ONE: Loading a graph mapper with a file not found creates broken file... graph mapper disappears off canvas and the output wire appears turns orange and appears to be coming from the 0,0 pixel of the canvas. This happens any time you try to port a .ghx file to another system with different drive letters/paths, etc.
Wish list:
Mass addition for vectors
Interactive domain control for Image Sampler (like with Gradient Mapper)
Allow Addition Component to handle String values (A + B = AB)
BIG ONE: Request Override for Icon display for Parameters, Wireless receiver, and script components if you change the name
BIG ONE: Add new behavior for Stream Filter and Stream Gate: Allow multiple index numbers. The Index number picks the value/object in the corresponding index position in the selected list.
For instance:
List 0: A, B, C, D, E
List 1: 1, 2, 3, 4, 5
List 2: .1, .2, .3, .4, .5
Index Stream: 0, 2, 2, 1, 1, 2, 1, 0, 1
Results: A, .2, .3, 4, 5 (This is new behaviour and more useful than Weaving)
I have attached a GHX that includes VB components that do this, but it would be better to have GH components with I/O manager options and data matching behavior, etc.
Thanks,
Marc Syp
Knowlton School of Architecture
The Ohio State University
Columbus, OH…
curves A and B.
For each point pA on curve A,
you need the corresponding tangent vector tA on curve A, and the lists of "cone" vectors pB(j)-pA and tangent vectors tB(j) on curve B. so you have three vectors tA, tB(j) and AB(j)
these three vectors define a parallelogram thas varies along j
3d determinant of the three vectors above gives you the volume of this parallelogram. When 3dDet = 0 then it means it's flat, the vectors are coplanar. Thats what we're looking for.
So you just need to plot the curve 3Ddet = f(pB) , still for each point on A
'pB is the parameter here'
graphically solve these cuves to find the zeros and you feed back the resulting parameter in curve B. draw te line, done.
You can manage double solutions or cusps directly on the plot by using clostest point and >= conditions to kill unwanted results.
I do it twice, from crv A to crrv B and from B to A to make sure I catch start and end generatrices each time.
The videos you posted are interesting. I don't understand how it works with just 2 slider to tune the curves.
…
as passing this extra check and because of that it was running faster. It doesn't mean that the first analysis is totally wrong as it depends on the analysis case and should be checked and optimized before running the final analysis.
You can read more about radiance parameters here (http://radsite.lbl.gov/radiance/refer/Notes/rpict_options.html), and here (http://radiance-online.org/community/workshops/2011-berkeley-ca/pre...). Since you have a light-shelf I suggest you to add to the number of ambient bounces (ab).
Now back to your wish to have the analysis run faster you can comment the line hb_writeRADAUX.checkInputParametersForGridBasedAnalysis() inside Honeybee_runDaylightSimulation and it won't overwrite the initial values but make sure that you run a number of test cases and compare the results between the runs.
Back to your definition, it looks good to me. You could have saved yourself some time by using MassToZone component and then just adding the ceiling separately but there's nothing wrong with your approach.
The main place in the definition that can change is how you're generating the vertical fins. I imagine you can use a single set of components to generate every group of the fins but again your definition will work.
I updated your file to the latest version, which means you also need to update Honeybee and Ladybug in case you're looking to modify the file.
Hope it helps,
Mostapha…
ace when I start running Galapagos/Octopus (below is "room orientation optimization" shared at http://hydrashare.github.io/hydra/viewer?owner=mostaphaRoudsari&fork=hydra_1&id=Room_Orientation_Optimization&slide=0&scale=1&offset=0,0) It may take quite some time to see some results. That's fine for the above simulation. But my real challenge is, when I am going to optimize room dimension with respect to ASE and sDA calculations, either Galapagos or Octopus goes wildly and never come up with a solution. I believe the time-consuming calculation, especially sDA with higher -ab numbers, trigger the lag a lot? Any suggestion/trick to improve it?
Most importantly, based on your experience, for example to optimize window/exterior shades sizes and achieve ASE<10% and sDA>55% (LEED v.4 requirements), Octopus (due to its capacity of multiple objectives) is the only choice? Any other approaches within grasshopper?
The alternative approach in my mind as a GH beginner is as follows. But I am not sure whether it is doable. Again, your comments will be greatly appreciated.
Since all my room/window/shades dimension are controlled by number sliders, I am thinking whether a component from GH will trigger these number sliders (not necessary to be all of them but one by one) automatically. If this is possible, I can do "data recorder" to record outputs from ASE and sDA. Eventually I will have a database of the input parameters and sDA/ASE results.
Does it make sense? Is there a component which can trigger number slider output at certain step?
Many thank!
Cheney …
ARRAY with certain spatial order or mechanism under consideration of ecological design. The evaluation and definition of “ARRAY” are open to applicants’ imaginations. While the term “ecological” is subjected to many definitions: social, ecological, sustainable, its re-evaluations are open to students’ interpretations. Entrants are free to choose or make site, real or virtual.
ELIGIBILITY
Open to international students in the fields of architecture and design related disciplines from an accredited four-year or five-year architecture program. Graduates with certificate in 2011 are accepted. Teamed collaboration consisting of no more than 3 students in the above mentioned fields is permitted. Works submitted must be of applicants’ original works. Works done through school studios are accepted, but limited to 2011 term.
ENTRY FEE
Free
DEADLINES
Online Registration deadline: Oct 30th, 2011, 17:00 Taipei Time
(Upon completing registration, applicant will receive a registration number via email.)
Submission deadline: email sent by Nov 3rd, 2011, 17:00 Taipei Time
SUBMISSION REQUIREMENTS
This is a digital competition and no hardcopies are necessary. Entrants must submit their proposal via email no later than Nov 3rd, 2011 17:00 (Taipei Time) to the following email address:
hojenhwang@mail.ntut.edu.tw
The project submission must contain the following files:
1. Two A1 boards in portrait format (594mm x 841mm), with identification number at the upper right corner. Names and other identifying information are not allowed on front side of the boards. The resolution of the boards must be 300dpi, RGB mode and saved as JPG files.. The files must be named after the registration number followed by the board number. For example: 03956-board1.jpg and 03956-board2.jpg.
2. A DOC file containing the project discription (600 words max). This file must be named after the registration number followed by the word "discription". For example: 03956-discription.doc.
3. A scan of statement form. This file must be named after the registration number followed by the word "statement_scan". For example: 03956-statement_scan.jpg.
4. All the files must be placed in a ZIP folder named after your registration number. For example: 03956.zip. Size of the ZIP folder is suggested to be less than 15mb, while size more than 25mb will not be accepted
AWARDS
(1) Gold Prize winner will be awarded TWD 60,000 and a trophy.
(2) Silver Prize winner will be awarded TWD 30,000 and a trophy
(3) Bronze Prize winner will be awarded TWD 15,000 and a trophy
(4) Honorable Mention winners will be awarded TWD 5,000 and a merit certificate
Winners will be announced and notified by mid of Nov, 2011.
JURY
Two stages of open jury. Details to be announced
PUBLIC EXHIBITION
Nov 13, 2011~ Nov 18, 2011 at NTUT, Taipei
…
Added by Yu-Min Su at 2:03am on September 23, 2011
he Cordyceps. Maybe some of you find this helpful/useful.
So basically, the Cordyceps is a physical module with 4 knobs and 1 slider. The knobs give an output between 1 and 1000, while the physical slider outputs 0-359. And of course, for this physical module I wrote a plugin to communicate with it. The knobs are intended to be the variables that modifies the design, while the physical slider is intended to be connected to the camera component.
Here I will put up "the recipe" for all to make their own module. You will be able to download the plugin as well.
Please send me a message if you want the 3D-files for the knobs, the box and slider knob. They've been made to directly 3D-print.
Plugin:
https://github.com/zakadjeb/Cordyceps/blob/master/Cordyceps/Cordyce...
Code for Arduino IDE:
https://github.com/zakadjeb/Cordyceps/blob/master/Arduino/_Arduino_...
What you need:
1x - Arduino (Leonardo, UNO or whatever)
4x - Potentiometers
1x - Sliding potentiometer
1x - Breadboard
Bundle of jump wires.
1. So, a potentiometer is a variable resistor, which is basically a component that changes the resistance between the voltage and the ground.
If A is supplied with 5V then B must be connected to Ground. The W will give "read" the resistance, and thus should be placed in Analog input (A0-A5) on the Arduino. The slider potentiometer works the same way.
2. Now connect the 4 pots to each their Analog input. The slider is supposed to be in A4. So to make sure:
A0: Knob1
A1: Knob2
A2: Knob3
A3: Knob4
A4: Slider
3. Now it's time to connect the voltage! Using the breadboard, the voltage can be sent through 1 line, the Ground as well. It should be quite easy to connect them.
4. Now, download the Arduino IDE and copy-paste the code I supplied above. In the IDE, you need to let it know which Arduino you're working with, and which port is should send the script.
5. Almost there. Download the plugin. Open the port you're using through the plugin. Set Start to True and the Cordyceps should be within you.
This recipe will be updated!
Let me know if there are any issues.
// Zakaria Djebbara…
he Cordyceps. Maybe some of you find this helpful/useful.
So basically, the Cordyceps is a physical module with 4 knobs and 1 slider. The knobs give an output between 1 and 1000, while the physical slider outputs 0-359. And of course, for this physical module I wrote a plugin to communicate with it. The knobs are intended to be the variables that modifies the design, while the physical slider is intended to be connected to the camera component.
Here I will put up "the recipe" for all to make their own module. You will be able to download the plugin as well.
Please send me a message if you want the 3D-files for the knobs, the box and slider knob. They've been made to directly 3D-print.
Plugin:
https://github.com/zakadjeb/Cordyceps/blob/master/Cordyceps/Cordyce...
Code for Arduino IDE:
https://github.com/zakadjeb/Cordyceps/blob/master/Arduino/_Arduino_...
What you need:
1x - Arduino (Leonardo, UNO or whatever)
4x - Potentiometers
1x - Sliding potentiometer
1x - Breadboard
Bundle of jump wires.
1. So, a potentiometer is a variable resistor, which is basically a component that changes the resistance between the voltage and the ground.
If A is supplied with 5V then B must be connected to Ground. The W will give "read" the resistance, and thus should be placed in Analog input (A0-A5) on the Arduino. The slider potentiometer works the same way.
2. Now connect the 4 pots to each their Analog input. The slider is supposed to be in A4. So to make sure:
A0: Knob1
A1: Knob2
A2: Knob3
A3: Knob4
A4: Slider
3. Now it's time to connect the voltage! Using the breadboard, the voltage can be sent through 1 line, the Ground as well. It should be quite easy to connect them.
4. Now, download the Arduino IDE and copy-paste the code I supplied above. In the IDE, you need to let it know which Arduino you're working with, and which port is should send the script.
5. Almost there. Download the plugin. Open the port you're using through the plugin. Set Start to True and the Cordyceps should be within you.
This recipe will be updated!
Let me know if there are any issues.
// Zakaria Djebbara…
; GH, this one came out and rhinoceros is disappear...like this
it said " Rhinoceros5's working is stopped. because some problems occured so Rhinoceros5 can't work correctly no longer " then I have no choice but terminate Rhinoceros.
There are some discussion about RhinoIronPython installing numpy though, no one has same problem like me. so Please somebody tell me!!
and one more question...just in case, I tried to install numpy into ironPython2.7
C:\Program Files (x86)\IronPython 2.7>ipy "C:\Program Files (x86)\IronPython 2.7\ironpkg-1.0.0..py" --installBootstrapping: c:\users\owner\appdata\local\temp\tmp2nand1\ironpkg-1.0.0-1.egg 118 KB [.................................................................]
C:\Program Files (x86)\IronPython 2.7>ironpkg -hUsage: ironpkg-script.py [options] [name] [version]
.
.
.
C:\Program Files (x86)\IronPython 2.7>ironpkg scipyWrote configuration file: C:\Users\owner\.ironpkg=============================================================================Traceback (most recent call last): File "C:\Program Files (x86)\IronPython 2.7\ironpkg-script.py", line 10, in <module> File "C:\Program Files (x86)\IronPython 2.7\lib\site-packages\enstaller\main.py", line 364, in main File "C:\Program Files (x86)\IronPython 2.7\lib\site-packages\enstaller\indexed_repo\chain.py", line 27, in __init__ File "C:\Program Files (x86)\IronPython 2.7\lib\site-packages\enstaller\indexed_repo\chain.py", line 67, in add_repo File "C:\Program Files (x86)\IronPython 2.7\lib\site-packages\enstaller\utils.py", line 92, in write_data_from_url File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 435, in open File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 407, in _call_chain File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 654, in http_error_302 File "C:\Program Files (x86)\IronPython 2.7\Lib\httplib.py", line 1261, in __init__ File "C:\Program Files (x86)\IronPython 2.7\lib\site-packages\enstaller\utils.py", line 73, in open_url File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 154, in urlopen File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 547, in http_response File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 467, in error File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 429, in open File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 446, in _open File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 407, in _call_chain File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 1240, in https_open File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 1167, in do_openAttributeError: 'module' object has no attribute '_create_default_https_context'
C:\Program Files (x86)\IronPython 2.7>
how can I deal with this error?…