the pipe component .I have one curve ,but Pipe component outputs two pipes .This guide curve have two kinks . Pipe component fails at one of them .
Bug #3
I guess this bug may have been fixed .
Wish #1
I hope adding an "reverse list" option to the right-click menu .I think this would be useful (at least for myself).
Wish #2
I hope the SimplifyTree component would clear the zeros located at the end and middle of branch in condition the branches have same length.For example, I have a tree looks like :
A = {0;1;0} B = {0;1;0;1}
C = {0;1;0;0;1;0;0;0}
After simplify ,I get:
A = {1} B = {1;0;1}
C = {1;0;0;1}
And if the tree structure is something like:
A={0;0;1;0}
B={0;0;1;1}
C={0;0;1;2}
After simplify ,I get:
A={1;0}
B={1;1}
C={1;2}
But If the tree is:
A={0;0;0;0;0;0}
B={0;0;1;0;1;0}
C={0;0;1;0;2;0}
I get:
A={0;0}
B={1;1}
C={1;2}
WIsh #3
I came across conditions that there is no direct way to handle some Datatree matching problems . And now I think I find what's the problem :GH now lack the capability to make cross reference between lists/branches .For example, I have two trees ,the first one have two branches {0}&{1}, the other have three branches{0}&{1}&{2}.Now GH would do:
what I want is :
If this can come true ,I can say it would be very very very useful . I just have a coarse idea on how to do that: Like () wrap items,{} wrap branches, then [] wrap trees .
Say I have a tree [0] ,which have three brabches{0},{1},{2}. So [0]=[{0};{1};{2}] or [0]=[{0},{1},{2}]
If this is ruled, the following fomula is meanningful:
[0]=[{0}] (this means tree[0] just have one branch)
[0]=[{0;0;0};{0;0;1};{0;0;2}]
[0]=[{0;0};{0;1};{0;2}]=[{0;0;0};{0;0;1};{0;1};{0;2}]After that, Maybe we could match [{0};{1}] and [{0};{1};{2}] very easily (Longest List;Shortest List;Cross Reference) ??
I tried to explain the concept of "tree" to my friends ,but I am confuzed somewhere myself .For example ,how could we have a tree including branches {0},{0;0}and{0;0;0} at the same time??{0} should be the biggest tree trunk,and {0;0} is part of {0} .{0;0;0} is just the smallest trunk and store the least data inside .How could the biggert trucks are empty while only the smallest branches contain items ?(David drawed a datatree that tell this,remember??)
But if this idea is acceptable ,then I could make a fairy tale about tree to them :
(Long long ago...)
[0] is a tree ,[1] is a tree.
{0},{1},{0;0}.{0;1;0} are branches.
{0}=(0,1,2,3,4,5) is branch.
[0]= [{0;0;0};{0;0;1};{0;0;2] is a standard tree .
[0]=[{0;0;0};{0;0;2};{0;0;3] is a pruned tree.
[{0};{0;0};{0;0;0}] is an illegal tree .
Gh is lenient enough to allow the existence of illegal tree .
Gh is lenient enough to allow the existence of empty trees& empty branch&null items.
We can use PathMapper to transform an illegal tree into a legal one and vice versa . We can use PathMapper to do any things to tree&branch&item.
Wish #4
wish for Split List component : it would have a wrap option just like many other components.In this way , we can split a list of data at -1 .I think this would be useful .
wish #5
wish for a Preview toggle component .See picture below (it's fake).
this toggle look mostly like the boolean toggle, but it have a input param by which we can control the preview logically and smartly .
When there is no input ,we can control swith the preview with a double click action .This toggle component could control all gh geometry overriding the global setting .The link curve between toggle and target works just like the galapagos.
Wish #6
Wish for adding arc angle output to both Arc 3pt and Arc SED components.This would make things easier sometimes .
Wish #7
Many times I were puzzled that a same gh script would perform perfect if the input is single surface but buggy while the input is more than one surface .After debuging many times ,I just found that if one or two component of the script do things smarter ,this kind of bugs would never happen again !! Simply saying:we need a optional datatree match behavior. Say I have two datatree [{0;0};{0;1}] and [{0;0;0};{0;0;1};{0;0;2};{0;0;3};
{0;1;0};{0;1;1};{0;1;2};{0;1;3}] Normally {0;0} matchs {0;0;0},{0;1} matchs other branches (Longest List behavior).Now I need {0;0} matchs {0;0;0},{0;0;1},{0;0;2},{0;0;3} separately and {0;1} matchs {0;1;0};{0;1;1};{0;1;2};{0;1;3} separately .I cant describe this matching rules accurately but it's very obvious .I hope you can understand the meaning .
I remember David said once that he would not change anything about the datatree matching rules in order to avoid destroy people's production work .And that is my bottomline too .What I want is when I need one component to match the input datatree in this way ,I can switch it (just it ) into this mode (Assuming these is a "xxx mode" option in component's right-click menu ). In this way ,All the exist Gh def would not be destoryed.
PS. I am not carping but I found the DivideKink param input of Divide Curve component is useless except adding a segments output .
…
a modélisation paramétrique avec Grasshopper pour Rhinoceros3D ainsi que démontrer plusieurs façons de l’appliquer à votre travail architectural.
Cette formation est conçue comme une expérience augmentée autour de l’architecture paramétrique et elle comprend aussi :
+ Une introduction au design paramétrique par Francesco Cingolani+ Une étude de cas d’un projet de l’agence de l’agence HDA Hugh Dutton Associés+ Acces gratuit 3 journées à l’espace de coworking SUPERBELLEVILLE
INSTRUCTEURS
FRANCESCO CINGOLANI . designer, enseignant en architecture paramétrique, co-fondateur deSUPERBELLEVILLE coworking, collaborateur de l’agence Hugh Dutton Associés. – voir le profil Linked-in
ŞULE ERTÜRK . Architecte diplômée de l’Université Yildiz Teknik à Istanbul, Master en architecture paramétrique, travaille actuellement aux Ateliers Jean Nouvel dans le département 3D. - voir le profil Linked-in
QUENTIN GAUCHER . Architecte DE-HMONP, diplômé de l’ENSA Paris La Villette, intervenant en architecture paramétrique sur divers projets - voir le profil Linked-in
DATES 25 mars 2013 . Annonce de la formation / Début des inscriptions5 avril 2013 . Fin des inscriptions13 – 14 avril 2013 . Formation
HORAIRES Samedi et Dimanche 13 et 14 avril . 10:00 > 13:00 – 14:00 > 19:00Total : 16 heures
TARIF700 € professionnels400 € étudiants
RÈGLEMENT50% est à régler lors de l’inscription (au plus tard le 5 avril)50% au début de la formation.Les règlements s’effectuent par carte bancaire via Paypal ou par virement bancaire.
NOMBRE DE PARTICIPANTSMinimum pour l’activation de la formation : 5Maximum : 7
CONTACTInscriptions et réglements : fr.cingolani@gmail.com . SUPERBELLEVILLE coworkingInformations : quentin.gaucher@gmail.comimmaginoteca.com/grasshopper
EN BONUSLe café italien et les plats faits maison de Claudia offerts aux participants :)…
occur more than once in the same list, and different elements with identical values can occur more than once. Also, a list may contain lack of elements, referred to as "nulls".
Sets. Strictly speaking a Set is a mathematical construct which adheres to a strict collection of rules and limitations. Basically, a Set is the same as a List, with the exception that it cannot contain the same element more than once, or indeed two or more different elements with the same values. You see, in mathematics there is no difference between a value and an instance of that value, they are the same thing. In programming however it is possible to store the number 7 in more than one spot in the RAM. Grasshopper does not enforce this rule very strongly though, you can use a lot of Set components on lists that have multiple occurrences of the same value. The big difference between Lists and Sets in Grasshopper is that Sets are only defined for simple data types that have trivial equality comparisons. Basically: booleans, integers, numbers, complex numbers, strings, points, vectors, colours and intervals. Lists can contain all kinds of data.
Strings. Strings are text. There's nothing more to it. I don't know why early programmers chose to call them strings, but I suppose it's a better description of the memory representation of them. Strings are essentially sequences of individual characters.
Trees. Trees are the way all data is stored in Grasshopper. Even when you only have a single item, it will still be stored in a tree. A tree is a sorted collection of lists, where each list is identified by a path. A specific path can only occur once in a tree, when you merge two trees together, lists with identical paths are appended to each other. Trees are an attempt to losslessly represent not just the data itself, but also the history of that data. Imagine you have 4 curves {A,B,C,D} and you divide each into 3 points {X,Y,Z}. Then, for each of those points you create a new line segment {X',Y',Z'} and then divide each of those line segments again into 5 points each {K,L,M,N,O}. The way data is stored in trees, it should be possible to figure out whether a point M belongs to X' or to Z', and whether that X' or Z' came from A, B, C or D. This is why paths are often quite long after a while, because they encode a lot of history.
Paths. A Path is nothing more than a list of integers. It's denoted using curly brackets and semi-colons: {A;B;...;Z}. A Path should never be empty {} or have negative integers {0;-1}, but it is certainly possible to create a path like this and it probably won't even crash Grasshopper. Paths are 'grown' by components that (potentially) create more than one output value for a single input value. For example Divide Curve. It creates N points for every single input curve. In cases like this a new integer is appended to the end of the path.
In the next release the Path logic in Grasshopper is somewhat different. I fixed a number of obscure bugs (hopefully without introducing new fresh bugs) and special cased certain operations to somewhat reduce the speed at which paths grow. This may well break files that rely on a specific tree layout, but I hope the temporary sacrifice will be worth the long-term benefits.
--
David Rutten
david@mcneel.com
Poprad, Slovakia…
curve or locus] of a segment AB, in English. The set of all the points from which a segment, AB, is seen under a fixed given angle.
When you construct l'arc capable —by using compass— you obviously need to find the centre of this arc. This can be easily done in GH in many ways by using some trigonometry (e.g. see previous —great— solutions). Whole circles instead of arcs provide supplementary isoptics —β-isoptic and (180º-β)-isoptic—. Coherent normals let you work in any plane.
Or you could just construct β-isoptics of AB by using tangent at A (or B). I mean [Arc SED] component.
If you want the true β-isoptic —the set of all the points— you should use {+β, -β} degrees (2 sides; 2 solutions; 2 arcs), but slider in [-180, +180] degrees provides full range of signed solutions. Orthoptic is provided by ±90º. Notice that ±180º isoptic is just AB segment itself, and 0º isoptic should be the segment outside AB —(-∞, A] U [B, +∞)—. [Radians] component is avoidable.
More compact versions can be achieved by using [F3] component. You can choose among different expressions the one you like the most as long as performs counter clockwise rotation of vector AB, by 180-β degrees, around A; or equivalent. [Panel] is totally avoidable.
Solutions in XY plane —projection; z = 0—, no matter A or B, are easy too. Just be sure about the curve you want to find the intersection with —Curve; your wall— being contained in XY plane.
A few self-explanatory examples showing features.
1 & 5 1st ver. (Supplementary isoptics) (ArcCapableTrigNormals_def_Bel.png)
2 & 6 2nd ver. (SED) (ArcCapableSED_def_Bel.png)
3 & 7 3rd ver. (SED + F3) (ArcCapableSEDF3_def_Bel.png)
4 & 8 4th ver. (SED + F3, Projection) (ArcCapableSEDProjInt_def_Bel.png)
If you want to be compact, 7 could be your best choice. If you prefer orientation robustness, 5. Etcetera.
I hope these versions will help you to compact/visualize; let me know any feedback.
Calculate where 2 points [A & B] meet at a specific angle is just find the geometrical locus called arco capaz in Spanish, arc capable in French (l'isoptique d'un segment de droite) or isoptic [curve or locus]
of a segment AB, in English. The set of all the points from which a segment,
AB, is seen under a fixed given angle.…
ers can be applied from the right click Context Menu of either a component's input or output parameters. With the exception of <Principal> and <Degrees> they work exactly like their corresponding Grasshopper Component. When a I/O Modifier is applied to a parameter a visual Tag (icon) is displayed. If you hover over a Tag a tool tip will be displayed showing what it is and what it does.
The full list of these Tags:
1) Principal
An input with the Principal Icon is designated the principal input of a component for the purposes of path assignment.
For example:
2) Reverse
The Reverse I/O Modifier will reverse the order of a list (or lists in a multiple path structure)
3) Flatten
The Flatten I/O Modifier will reduce a multi-path tree down to a single list on the {0} path
4) Graft
The Graft I/O Modifier will create a new branch for each individual item in a list (or lists)
5) Simplify
The Simplify I/O Modifier will remove the overlap shared amongst all branches. [Note that a single branch does not share any overlap with anything else.]
6) Degrees
The Degrees Input Modifier indicates that the numbers received are actually measured in Degrees rather than Radians. Think of it more like a preference setting for each angle input on a Grasshopper Component that state you prefer to work in Degrees. There is no Output option as this is only available on Angle Inputs.
7) Expression
The Expression I/O Modifier allows you change the input value by evaluating an expression such as -x/2 which will have the input and make it negative. If you hover over the Tag a tool tip will be displayed with the expression. Since the release of GH version 0.9.0068 all I/O Expression Modifiers use "x" instead of the nickname of the parameter.
8) Reparameterize
The Reparameterize I/O Modifier will only work on lines, curves and surfaces forcing the domains of all geometry to the [0.0 to 1.0] range.
9) Invert
The Invert Input Modifier works in a similar way to a Not Gate in Boolean Logic negating the input. A good example of when to use this is on [Cull Pattern] where you wish to invert the logic to get the opposite results. There is no Output option as this is only available on Boolean Inputs.
…
.
Things have been working swimmingly in many areas of the plugin, but one particular problem has been tough to solve. I have two components that are trying to read/write to the same memory at the same time, causing Rhino exceptions and crashes.
The conflicts appear to be happening between two components -- one is a "Layer Events Listener" that reports essentially what type of layer event just happened. The other is a "Set Layer Visibility" component that toggles the visibility of a list of layers.
The code:
public class LayerTools_LayerEventsListener : GH_Component { /// <summary> /// Initializes a new instance of the LayerTools_LayerListener class. /// </summary> public LayerTools_LayerEventsListener() : base("Layer Events Listener", "Layer Listener", "Get granular information about the layer events happening in the Rhino document.", "Squirrel", "Layer Tools") { }
/// <summary> /// Registers all the input parameters for this component. /// </summary> protected override void RegisterInputParams(GH_Component.GH_InputParamManager pManager) { pManager.AddBooleanParameter("Active", "A", "Set to true to listen to layer events in the Rhino document.", GH_ParamAccess.item, false); pManager.AddTextParameter("Exclusions", "E", "Provide a list of exclusions to stop reading specific events (Added, Deleted, Moved, Renamed, Locked, Visibility, Color, Active).", GH_ParamAccess.list); pManager[1].Optional = true; }
/// <summary> /// Registers all the output parameters for this component. /// </summary> protected override void RegisterOutputParams(GH_Component.GH_OutputParamManager pManager) { pManager.AddBooleanParameter("Initialized", "I", "Whether the listener changed from passive to active.", GH_ParamAccess.item); pManager.AddTextParameter("Document Name", "doc", "Name of the Rhino document that is changing.", GH_ParamAccess.item); pManager.AddTextParameter("Layer Path", "path", "Path of the modifed layer.", GH_ParamAccess.item); pManager.AddIntegerParameter("Layer Index", "ID", "Index of the modified layer.", GH_ParamAccess.item); pManager.AddIntegerParameter("Sort Index", "SID", "Sort index of the modified layer.", GH_ParamAccess.item); pManager.AddTextParameter("Event Type", "T", "Type of the modification.", GH_ParamAccess.item); pManager.AddBooleanParameter("Added", "A", "If the layer has been added.", GH_ParamAccess.item); pManager.AddBooleanParameter("Deleted", "D", "If the layer has been deleted.", GH_ParamAccess.item); pManager.AddBooleanParameter("Moved", "M", "If the layer has been moved.", GH_ParamAccess.item); pManager.AddBooleanParameter("Renamed", "R", "If the layer has been renamed.", GH_ParamAccess.item); pManager.AddBooleanParameter("Locked", "L", "If the layer locked setting has changed.", GH_ParamAccess.item); pManager.AddBooleanParameter("Visibility", "V", "If the layer's visibility has changed.", GH_ParamAccess.item); pManager.AddBooleanParameter("Color", "C", "If the layer's color has changed.", GH_ParamAccess.item); pManager.AddBooleanParameter("Active", "Act", "If the active layer has changed.", GH_ParamAccess.item); }
/// <summary> /// This is the method that actually does the work. /// </summary> /// <param name="DA">The DA object is used to retrieve from inputs and store in outputs.</param> protected override void SolveInstance(IGH_DataAccess DA) { bool active = false; List<string> exclusions = new List<string>();
DA.GetData(0, ref active); DA.GetDataList(1, exclusions);
RhinoDoc thisDoc = null;
bool initialize = false;
string dName = null; string activePath = null; int layerIndex = -1; int sortIndex = -1; string eventType = null; bool added = false; bool deleted = false; bool moved = false; bool renamed = false; bool locked = false; bool visibility = false; bool color = false; bool current = false;
if (active) { thisDoc = RhinoDoc.ActiveDoc;
initialize = (!previouslyActive) ? true : false;
RhinoDoc.LayerTableEvent -= RhinoDoc_LayerTableEvent; RhinoDoc.LayerTableEvent += RhinoDoc_LayerTableEvent; previouslyActive = true;
} else {
RhinoDoc.LayerTableEvent -= RhinoDoc_LayerTableEvent; previouslyActive = false; }
if (ev != null) { dName = ev.Document.Name; layerIndex = ev.LayerIndex; eventType = ev.EventType.ToString();
if (!exclusions.Contains("Active")) { if (ev.EventType.ToString() == "Current") { // active layer has just been changed current = true; }
}
if (!exclusions.Contains("Moved")) { if (ev.EventType.ToString() == "Sorted") { // active layer has just been changed moved = true; }
}
if (!exclusions.Contains("Added")) { if (ev.EventType.ToString() == "Added") { // layer has just been added activePath = ev.NewState.FullPath; added = true; }
}
if (!exclusions.Contains("Active")) { if (ev.EventType.ToString() == "Deleted") { // layer has just been added
deleted = true; } }
if (ev.EventType.ToString() == "Modified") { // layer has been modified activePath = ev.NewState.FullPath;
//skip sortindex eventType = ev.EventType.ToString();
if (ev.OldState != null && ev.NewState != null) { if (!exclusions.Contains("Locked")) { if (ev.OldState.IsLocked != ev.NewState.IsLocked) locked = true;
} if (!exclusions.Contains("Visibility")) { if (ev.OldState.IsVisible != ev.NewState.IsVisible) visibility = true; }
if (!exclusions.Contains("Moved")) { if (ev.OldState.ParentLayerId != ev.NewState.ParentLayerId) moved = true; }
//if (ev.OldState.SortIndex != ev.NewState.SortIndex) moved = true; if (!exclusions.Contains("Renamed")) { if (ev.OldState.Name != ev.NewState.Name) renamed = true; }
if (!exclusions.Contains("Color")) { if (ev.OldState.Color != ev.NewState.Color) color = true; } }
} }
DA.SetData(0, initialize); DA.SetData(1, dName); DA.SetData(2, activePath); DA.SetData(3, layerIndex); DA.SetData(4, sortIndex); DA.SetData(5, eventType); DA.SetData(6, added); DA.SetData(7, deleted); DA.SetData(8, moved); DA.SetData(9, renamed); DA.SetData(10, locked); DA.SetData(11, visibility); DA.SetData(12, color); DA.SetData(13, current);
}
static bool previouslyActive = false; Rhino.DocObjects.Tables.LayerTableEventArgs ev = null;
void RhinoDoc_LayerTableEvent(object sender, Rhino.DocObjects.Tables.LayerTableEventArgs e) { ev = e;this.ExpireSolution(true); }
And for the layer visibility component:
public LayerTools_SetActiveLayer() : base("Set Active Layer", "SetActiveLayer", "Set the active layer in the Rhino document.", "Squirrel", "Layer Tools") { }
/// <summary> /// Registers all the input parameters for this component. /// </summary> protected override void RegisterInputParams(GH_Component.GH_InputParamManager pManager) { pManager.AddBooleanParameter("Active", "A", "Set to true to change the active layer in Rhino.", GH_ParamAccess.item, false); pManager.AddTextParameter("Path", "P", "Full path of the layer to be activated.", GH_ParamAccess.item); }
/// <summary> /// Registers all the output parameters for this component. /// </summary> protected override void RegisterOutputParams(GH_Component.GH_OutputParamManager pManager) { pManager.AddIntegerParameter("Layer ID", "ID", "Index of layer that has been activated.", GH_ParamAccess.item); pManager.AddBooleanParameter("Status", "St", "True when the layer has been activated.", GH_ParamAccess.item); }
/// <summary> /// This is the method that actually does the work. /// </summary> /// <param name="DA">The DA object is used to retrieve from inputs and store in outputs.</param> protected override void SolveInstance(IGH_DataAccess DA) { bool active = false; string path = "";
if (!DA.GetData(0, ref active)) return; if (!DA.GetData(1, ref path)) return;
int layer_index = -1; bool status = false;
if (path != null) {
Rhino.RhinoDoc doc = Rhino.RhinoDoc.ActiveDoc; Rhino.DocObjects.Tables.LayerTable layertable = doc.Layers;
layer_index = layertable.FindByFullPath(path, true);
if (layer_index > 0) { // if exists RhinoDoc.ActiveDoc.Layers.SetCurrentLayerIndex(layer_index, true); status = true; } }
DA.SetData(0, layer_index); DA.SetData(1, status); }
Now originally I was getting exceptions when changing multiple layers' visibility properties, which would cause the Event Listener to fire and try to read the Visibility property before the memory has been released by the Set Layer Visibility component. That led me to add an "Exceptions" input, that would allow me to disable the reading of Visibility events at the source in the Layer Events listener. That helped me manage about 95% of the crashes I was getting, but I still get strange crashes in other event properties, even when that property shouldn't be affected. For instance, I am getting a crash here on the Name property in the event from the delegate function, even though I am only changing Visibility at any one time:
I have a few ideas but they all seem pretty hacky. One is to try to set a flag that is readable by any component in the plugin -- so that the event listener can see if a "set" component is currently running and abort before causing an exception. The other is creating a delay in the event listener, somthing like 200ms, to allow any set components to finish what they are doing before reading the event. Neither seems super ideal.
Any ideas?
Thanks,
Marc
…
what they really mean by that, as in what buttons to push, so I assume it's a Windows Path entry?
2.) Modify PATH
Add the install location on the path, this is usually: C:\Program File\IronPython 2.7
But on 64-bit Windows systems it is: C:\Program File (x86)\IronPython 2.7
As a check, open a Windows command prompt and go to a directory (which is not the above) and type:
> ipy -V PythonContext 2.7.0.40 on .NET 4.0.30319.225
Tutorial on setting a Windows environmental variable (path):
http://www.computerhope.com/issues/ch000549.htm
But this fails to point out that path contains many entries already separated by semicolons so if I merely add a new variable called "path" it's likely that I will destroy existing program function. There's no info on how to just tack on another entry, and the Windows 7 edit box doesn't even show the whole collection, but one item (!), so I copied the existing path into a text editor to see the whole collection successfully and added the C:\Program Files (x86)\IronPython 2.7 entry after an added semicolon, correcting for an Enthought page typo of no 's' on the end of "Program Files". I also checked the others and many pointed to old missing directories so I deleted those entries.
...and the test fails and "ipy" is not recognized as a command, even though the path now shows up using "path" in the Windows CMD window, that is if I copy all by right clicking and pasting the stuff into a text editor to really view it all. I can run it from the source directory just fine.
The rabbit hole was indeed deep. Using the Task Manager (control-alt-delete) to kill Explorer and then Run in the menu to restart "Explorer," along with restarting the Windows CMD window however, worked. I can now invoke Iron Python ("ipy") via command line from any directory. For the "path" I edited path in the System Variables and not the User Variables. No, you don't have to type that whole crazy line above just to test the path variable, just "ipy" (and control-Z to quite IronPython) in the CMD window invoked by typing "cmd" into the Start menu search box.
From the CMD line this step did work fine:
3.) ironpkg
Bootstrap ironpkg, which is a package install manager for binary (egg based) Python packages. Download ironpkg-1.0.0.py and type:
> ipy ironpkg-1.0.0.py --install
Now the ironpkg command should be available:
> ironpkg -h(some useful help text is displayed here)
But of course Step 4 fails, giving pages of what seem to be error messages;
C:\Users\Nik>ironpkg scipy
Traceback (most recent call last):
File "C:\Program Files (x86)\IronPython 2.7\lib\site-packages\enstaller\utils.
py", line 92, in write_data_from_url
File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 126, in urlo
pen
File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 397, in open
File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 509, in http
_response
...
Why can't I just download Numpy as a normal file and thus also have it easy for other users to install it when they use my scripts? This is just crazy and lazy. The Enthought developer has turned this into a computer game, with a missing registration link and then the last step spits out errors with utterly no information on how to fix it manually.
This Step 4 error is covered here:
http://discourse.mcneel.com/t/trying-to-import-numpy-in-rhino-python-but-im-getting-this-error-cannot-import-multiarray-from-numpy-core/12912/16…
Added by Nik Willmore at 2:36pm on October 11, 2015