rves/holes. However, the Kangaroo script itself is prone to locking up so it seems like it might take forever. You can even double click stop the timer from the Windows task bar, I hadn't noticed that before:
You have to use that or right click disable the timer since even with the Reset toggle button input set to True the timer itself locks up the script a bit when you are changing things around.
Just setting the min/max numbers both to a desired mesh size gives a uniform mesh:
Oh weird, it's about if the timer is right click set to so small an interval that it gets ahead of Kangaroo! When you see how long each cycle is taking with the Display > Canvas Widgets > Profiler you just set the timer for above that and the interface comes back into being responsive. It only takes a few Kangaroo cycles to do the inflation, so a full second timer interval is even workable.
A finer mesh:
It's funny running it so slow since it overinflates at first, bulging out, before it equilibrates.
You have control over inflation pressure and mesh stiffness, for a variety of effects.
This is a good system once I realized the timer needed to be mellowed out.
What made it work was the fast custom meshing since a normal mesh is awful and MeshMachine wouldn't work with sharp corner holes at all, breaking out of the boundary even if I fixed curves or vertices or did the equivalent with NURBS surfaces instead of a starting mesh.
There is an initiation time for Kangaroo that doesn't show up on its Profiler time that happens even with the timer off.
There are some fine areas that can't inflate with a reasonable mesh setting:
Worth playing with but no match for ArtCAM since it suffers odd delays in between working fast. If I could get better 2D meshes, that were more adaptive it would be better, but MeshMachine is one of the only re-meshers I know and it's broken for even mildly sharp hole features.
Ah, how about a crude mesh that is then subdivided, guaranteeing inner vertices everywhere? Sort of works, but is still too dense. Way too dense to even do anything. The subdivision triangulates the quads, vastly increasing the mesh wire density. Better just to make a finer initial mesh with plenty of quads.…
Added by Nik Willmore at 12:57am on February 21, 2016
faces2012la.eventbrite.com/
The Responsive Surfaces Workshop _ LA 2012 will explore the use of Grasshopper, Firefly and Arduino as creative and technical tools in the design, simulation and prototyping of intelligent building skins. Grasshopper, a free plug-in for McNeel’s Rhino modeler, allows designers to create adjustable parametric forms through graphic icons rather than programming. Firefly is a new set of comprehensive software tools dedicated to bridging the gap between Grasshopper, theArduino micro-controller, the internet and beyond. It allows near real-time data flow between the 3D digital and physical worlds, and will read/write data to/from internet feeds, remote sensors, connect with machine vision protocols, and more.
Instructor: Jason Kelly Johnson, Firefly co-developer, Future Cities Lab and the CCA San Francisco Lecturer: Miles Kemp, President of Variate Labs and co-author of “Interactive Architecture”
Additional Information: Workshop Location: 8451 Beverly Boulevard, Los Angeles, CA 90048 (GOOGLE MAP) Required Materials: Each participant should bring their own Sparkfun Inventors Kit or equivalent. Software: Please have the following software installed on your personal laptop computer - Rhino (SR9) + the latest versions of Grasshopper, Firefly and Arduino.
…
and fabrication procedures, is being conducted in June-July 2014 in association with Shih Chien University and Tamkang University in Taipei, Taiwan. The interdisciplinary workshop provides an opportunity to architects and designers to be a part of the 12 day studio and investigate interactive design and fabrication solutions for dynamic socio-cultural fabrics.
ExtraFabrica is a part of Dezact’s exploration aiming to develop and test interactive design and fabrication scenarios in neglected or problematic urban interstices and ecologies, to adapt to existing constructs for new use and identity, to catalyse socio-cultural activities and to engage behaviour parallax between physical and virtual environments. Conditions of 'live' factors with extended duration and occupation, i.e. street life, derelict buildings, traffic, rain, dance, demonstration, and so on, are invited to interfere with quantifiable or codify-able parameters set out by design algorithm, feedback mechanism and fabrication dynamics. The idea envisages architectural outcome which enables fabrication of action, of participation, of change of values, of identity, of confluence of voices and dreams.
Tutors for Extra Fabrica 2014:
Doreen Bernath | SpaceMedia Int. , AA London
Gary Freedman | SHaGa London, UN Studio, AAVS Tel Aviv
Ping Hsiang Chen | [IN]Morph Lab, KPF London, AA London
Akshay Goyal | AG+DR, Architron Group, AA London
Sushant Verma | rat[LAB], Zaha Hadid Architects, AA London
Symposium:
AA DRL Director Theodore Spyropoulos is the first confirmed keynote speaker for ExtraFabrica 2014, with a number of more speakers to be confirmed soon for the symposium, that takes place at the end of the workshop.
Collaborators:
Arthur Mamou-Mani | Mamou-Mani Ltd., Simply Rhino Ltd., Uni. Westminster
Angel Fernando Lara Moreira | AA Digital Prototyping Lab, DLAB, Make LAB
Clive Eveleigh | WWarc.Taipei, ZERo-studio, Shih Chien University
Chun Fone Liu | Ming Chuan University, AA Em.Tech.
Yao Chung-Han | i/O Lab, Shih Chien University…
register, please contact Miss Roula Homsi Tel: 06/218400 ext:4007email: r.homsi@bau.edu.lbTOPICS: Parametric design , Algorithms, Kinetic Architecture, responsive facades, interactive design, smart buildings, generative design, NURBS modeling, parametric modeling, architectural design algorithms, form finding algorithms , and Environmental Adaptive Dynamic ArchitectureComputational skills: Rhino3D – Grasshopper 3d – Paneling tools - Kangaroo plugin - fields grasshopper -Digital Fabrication- Arduino micro controllers - lighting and temperature sensors - Firefly plugin - gHowl – mobile controller - Wi-Fi controllersWORKSHOP PROGRAM: PHASE ONE: Day 01- opening lecture on Algorithmic Added Design - tutorials and introductions to NURBS modeling with Rhino 3d- Parametric modeling tutorials with grasshopper 3d- Grasshopper processes, algorithmic logic and data management-Essential mathematical functions and logical operations- Projects assignments, groups divisions, project phase’s scheduleDay 02 - Form finding methods and theories for architecture - Training on physical algorithms using Kangaroo plugin-Catenary systems on curves, Catenary on surfaces, and mesh relaxation- Algorithms and design inspirations- Subdivision algorithms, paneling tools- Responsive materials, structural optimizations- Project phase one submissionDay 03- Envelope pattern optimizations for natural lighting- Kinetic Architecture introduction and projects examples- Responsive material analysis and design systems- Kinetic facades and dynamic pattern - Training on Arduino & preparing digital models for kinetic simulationPHASE TWODay 04- environmental Sensors, design reaction- lighting sensors, temperature sensors-Responsive envelop responsive simulations to sensors.-Smart and embedded systems for Architecture- Architectural models movements and mechanisms Day 05- Wireless controllers for grasshopper- Mobile controllers - Projects final submissionDay 06 -Finalizing students projects,-Models fabrications and sensors installations, documenting reactions-Final project ourcomesFEES for the 2 phases __ fees is 420 $ per participants( 360 for BAU students) Fees includes all teaching materials, software kit, lectures kit, laser cutting, Arduino microcontroller boards, sensors and using equipment. Students need to bring their own laptops, digital equipment and model making tools.PREREQUESTSThis program is open to current international Engineering, architecture and design students, masters, PhD candidates and young architects and professionals. Software Requirements: basic knowledge of 2D and 3D modeling software.…
connected hyperspace where architecture can be fluid, flexible and vivid, yet the aspect of materiality requires more attention.
Action-designed structures begin to move beyond the utopian proposals of the 20th century’s manifestos and hold a place in the world of realized designs. The AA Athens Visiting School aims to bring users closer to the built environment while revisiting habits of designing, building and experiencing space through materiality. Understanding materiality and form as a ‘unified whole’, the programme integrates manufacturing techniques through the experimentation fabrication of prototypes at a 1:1 scale.
Prominent Features of the workshop/ skills developed
Participants become part of an active learning environment where the large tutor to student ratio allows for personalized tutorials and debates.
The toolset of the Athens VS includes but is not limited to Processing and Grasshopper for Rhinoceros, as well as design analysis software.
Participants gain hands-on experience on digital fabrication.
Design seminars and a series of lectures support the key objectives of the programme, disseminating fundamental computational techniques, relevant critical thinking, theoretical understanding and professional awareness.
Applications
1) You can make an application by completing the online application found under ‘Links and Downloads’ on the AA Visiting School page. If you are not able to make an online application, email visitingschool@aaschool.ac.uk for instructions to pay by bank transfer. 2) Once you complete the online application and make a full payment, you are registered to the programme. A CV or a portfolio is NOT required.
The deadline for applications is 28 June.
Location AKTO College – Athens Campus 11Α Evelpidon Street (Pedion Areos) Athens, 113 62, Greece
Fees
The AA Visiting School requires a fee of £695 per participant, which includes a £60 Visiting membership fee. Fees do not include flights or accommodation, but accommodation options can be advised.
Eligibility The workshop is open to current Undergrad and Graduate architecture and design students, PhD candidates and young professionals. Software Requirements: Adobe Creative Suite, Rhino 5.
For more information, please visit:
http://www.aaschool.ac.uk/STUDY/VISITING/athens
http://ai.aaschool.ac.uk/athens/
For inquiries, please contact:
alexandros.kallegias@aaschool.ac.uk…
) Course Fee: Professional EUR 825,- (+VAT), Student EUR 415,- (+VAT)
Led by plug-in developer and structural engineer Clemens Preisinger, along with Zeynep Aksoz and Matthew Tam from the expert Karamba3D team, this three-day workshop will focus on methods of setting up structural systems in the parametric environment of Grasshopper. The participants will be guided through the basics of analyzing and interpreting structural models, to optimization processes, and how to integrate Karamba3D into C# scripts.
This workshop is aimed towards beginner to intermediate users of Karamba3D. However, advanced users are also encouraged to apply. It is open to both professional and academic users. For beginner users of Rhino and Grasshopper, there will be an optional introductory course one day before the Karamba3D course.
Karamba3D 1is a parametric structural engineering tool which provides accurate analysis of spatial trusses, frames, and shells. Karamba3D is fully embedded in the parametric design environment of Grasshopper, a plug-in for the 3D modeling tool Rhinoceros. This makes it easy to combine parameterized geometric models, finite element calculations, and optimization algorithms like Galapagos.
Course Outline
Introduction and presentation of project examples
Optimization of cross sections of line-based and surface-based elements
Geometric optimization
Topological optimization
Structural performance informed form finding
Understanding analysis algorithms embedded in Karamba3D and visualizing results
Complex workflow processes in Rhino, Grasshopper, and Karamba3D
Places are limited to a maximum of 10 participants with limited educational places. A minimum of 4 participants is required for the workshop to take place. The workshop will be canceled if this quota is not filled by October 28. The workshop will be taught in English.
Course Requirements
Basic Rhino and Grasshopper knowledge is recommended. An introductory course is offered.
No knowledge of Karamba3D is needed. Participants should bring their own laptops with Grasshopper and either Rhino 5 or Rhino 6 installed. You can download a 90-day trial version of Rhino. Karamba3D ½ year licenses for non-commercial use will be provided to all participants.
Please register here……
Added by Matthew Tam at 6:38am on September 13, 2019
r.
Enjoy...
Extract:
Intervista a David Rutten genio creativo, inventore e sviluppatore di grasshopper, il programma generativo che sta creando nuovi linguaggi estetici e funzionali nel design e nell'architettura. Arturo Tedeschi
Italian to English translation
Interview with David Rutten creative genius, inventor and developer of the Grasshopper, the generative program that is creating new aesthetic andfunctional design and architecture. Arturo Tedeschi
…
Added by Danny Boyes at 1:30pm on February 7, 2011
workshop de exploración formal y espacial usando algoritmos generativos integrando la optimizacion y fabricación en un mismo proceso. Para este taller se han seleccionado un conjunto de técnicas y estrategias para resolver problemas que hoy se presentan en el diseño y fabricación digital de formas complejas y euclidianas.
Bajo dos entornos de trabajo, entre técnicas interactivas y soluciones algorítmicas, se examinan conceptos y casos de estudio que le permitirán al participante decidir como y en que momento estas tecnologías pueden ser utilizadas como aliadas en los procesos de diseño y fabricación. Tomando como plataforma básica Rhino, se explora y optimiza el diseño y fabricación de topologías complejas bajo los entornos de Grasshopper RhinoNest y RhinoCam.
Paramétrica D_O_F pretende ahondar en el vinculo entre la industria, el mundo académico y la aplicacion profesional, a partir del desarrollo de sistemas de diseño digital y la fabricacion CNC. Para esta ocasión se suma Sabic Polymershapes,posibilitando la incorporación de la variable material dentro del diseño digital, agregando una nueva dimensión a las propuestas del workshop, de manera que estas se piensen, desarrollen y fabriquen en materiales Sabic con la tecnología Router CNC que disponen como empresa. El dia final, Parametrica.org en conjunto a Sabic Polymershapes, Enedi, Eximed y Mcneel LA nombrará un ganador para ser fabricado por Sabic Polymershapes Chile.
Paramétrica D_O_F esta dirigido a profesores y alumnos pertenecientes al area de Diseño Digital de carreras como Arquitectura, Diseño Industrial, e Ingenierías. Tambien se hace extensiva esta invitación a Arquitectos, Diseñadores Industriales, e Ingenieros pertenecientes al sector publico y privado. Las vacantes para aplicar a este workshop son 40.
Inscripciones:
http://workshop.parametrica.org/
Sponsor:
Sabic Polymershapes Chile
Instructores:
Rodrigo Culagovski www.culagovski.net
Guillermo Parada www.gt2P.cl
Diego Pinochet escripto.wordpress.com
Mario Vergara sistemasderepresentacion2.wordpress.com
Andres Gonzalez www.rhino3d.com
Colaboran
Jackie Nasser www.rhino3d.com
Rafael De Molino www.tdmsolutions.com
René Medel www.rhino3d.cl
NelsonEbensperger www.revistambientes.cl
Contacto e información:
data@parametrica.org…
ll-Facade using Rhino and Grasshopper Participants will learn; Rhinoceros Grasshopper Advanced Parametric Design Brick Formations and Explorations Shadow-Design Relationship
Session 2: Advanced Digital Modeling for Additive Manufacturing (3D Printing) Participants will learn; How to prepare a 3D design to 3D Printing process in Rhinoceros Advanced Methods for 3D Print optimisation for time and cost effective production 3D Printing software education Cura
INFO
Date Saturday, 28 September 2019 Schedule 9:30am – 2:30pm (Session 1) | 2:45pm – 7:00pm (Session2) Venue (TBC) Pada Labs, Istanbul Language English/Turkish Softwares Rhinoceros Grasshopper 3D Cura Participants will need to bring their own laptops with software installed; other plugins will be distributed at the workshop. Prerequisites All tutorials are open to beginner level. No previous knowledge of Cura and Grasshopper needed. Basic knowledge of Rhinoceros recommended. Participation The workshop is limited to the first 20 applicants. Each student will receive a certificate of participation. Prices for each session: (You can pick one and attend one) Special Early registration (Deadline 1 August ) Students 310 TL Professionals 400 TL Regular registration Students 390 TL Professionals 480 TL Prices for Session 1&2 Combined: (Full Day) Special Early registration (Deadline 1 August ) Students 540 TL Professionals 690 TL Regular registration Students 620 TL Professionals 790 TL DISCOUNTS Group registration of 3 or more people will get a 15% discount. * Previous Pada workshop students will get a 10% discount. DIRECTOR Begum Aydinoglu, M.Arch AA DRL will be instructing and directing the following workshops. REGISTRATION: Email to pada.workshops@gmail.com for registration instructions. Please note that we have limited seats and there won't be any exceptions. …