ng/702/30
EDIT: DK2 works, not with positional tracking yet (14/09/15)
Source is here:
https://github.com/provolot/RhinoRift
Steps:
1) Download these files (also attached below):
https://github.com/provolot/oculus-grasshopper/raw/master/oculus-grasshopper_v0.4.ghx
https://github.com/provolot/oculus-grasshopper/raw/master/OpenTrackRiftGrasshopperUDP.ini
https://github.com/provolot/oculus-grasshopper/raw/master/oculus-grasshopper-test_v0.1.3dm
2) Download OpenTrack - http://ananke.laggy.pk/opentrack/, and setup/install. Once installed, double-click to open.
3) In OpenTrack, load the 'OpenTrackRiftGrasshopperUDP.ini' profile. Click the 'Start' button and move your Rift around - make sure that it looks like the Yaw/Pitch/Roll data is being sent. TX/TY/TZ will all be 0, as Oculus doesn't have absolute positioning data.
4) In Rhino, open the test 3dm. You'll notice that there are two viewports - called 'LeftEye' and 'RightEye'. These have been placed to mimic where the screens should be for the Oculus Rift --- but only when Rhino is in fullscreen mode, with the command 'Fullscreen'. The placement needs to be tweaked, but should work.
If you want to use your own model, you can load your own .3dm file in Rhino, then you can right-click on the viewport name, and go to Viewport Layout > Read from File. If you then load my test file, Rhino should open my two viewports, sized correctly, onto your model.
The placement of these viewports need to be tweaked; if you find a better viewport layout, upload an empty Rhino file with your viewports, and we can share eye-layout 'templates'!
5) In Grasshopper, open the .ghx definition. Everything that is multiple-grouped is a value that can be changed. Two things here:
- IPD: Set this and convert it to the proper units for your model.
- Left/right viewport names. In this case, leave this as-is, since you're using my example file.
6) Turn on the Grasshopper Timer, if it isn't on already.
7) In the GH definition, toggle 'SyncEyes' to be True. Then, in the left viewport, try orbiting around with the mouse. The 'RightEye' viewport should move around as well, pretty much simultaneously.
8) In OpenTrack, click 'Start', then toggle 'ReadUDP' to be True. You should see the 'OpenTrackInfo' panel fill with data that's constantly changing.
9) Move around the landscape with your camera, and when you set on a starting view that's ideal, click the triangle of the Data Dam component to 'store' the data.
10) Finally, toggle 'OculusMove' to be true. If all works correctly, both viewports should move based on the Rift's movement.
Let me know if you have any problems!
Cheers,
Dan…
Added by Dan Taeyoung at 11:47pm on December 10, 2013
. From the Thermal Comfort Indices component, Comfort Index 11 (TCI-11):MRT = f(Ta, Tground, Rprim, e)
with:- Ta = DryBulbTemperature coming from ImportEPW component- Tground = f(Ta, N) where N comes from totalSkyCover input. Tground influences the long-wave radiation emitted by the ground in the MRT calculation.- Rprim defined as solar radiation absorbed by nude man = f(Kglob, hS1, ac)- ac is the clothingAlbedo in % (bodyCharacteristics input)- I can't find any definition in the code of Kglob and hS1. Could you tell me please what are those values referencered to? --> probably the globalHorizontalRadiation but how?- e = vapour pressure calculated from Ta and Relative Humidity input
Do you agree that in this case the MRT does not depend on these inputs: location, meanRadiantTemperature, dewPointTemperature and wind speed?It does not depend neither on the other bodyCharacteristics like bodyPosture, age, sex, met, activityDuration...?
MRT calculated by the TCI-11 method is the mean radiant temperature of a vector pointing vertically with a sky view factor of 100%?For ParisOrly epw,
2. From the SolarAdjustedTemperature component (that seems to be more used for the UTCI calculation examples on Hydra compared to TCI-11).
In contrast to the TCI-11, this component distinguishes diffuse and direct radiation and contextualizes the calculation thanks to _ContextShading input, right? It can also be applied to a mannequin thanks to the CumSkyMatrix and thus evaluate the dishomogeneity of radiation exposure.This component seems not to consider the influence of vapour pressure on the result --> is it then more precise to put the MRT output (from the TCI) as an input of meanRadTemperature for SolarAdjustedTemperature?The default groundReflectivity is set to 0.25 --> is GroundReflectivity taken into account in the Tground or MRT calculation in the TCI component? If yes, what is the hypothesised groundReflectivity?The default clothing albedo of 37% (TCI-11 bodyCharacteristics) corresponds to Clothing Absorptivity of 63%?
If the CumSkyMatrix input is not supplied, I get 9 results for the mannequin --> where are those points/results coming from?
If the CumSkyMatrix input is supplied,I suppose the calculation of the 482 results correspond to a calculation method similar to the radiation analysis component that is averaged over the analysis period. Right?But I don't understand why the mannequin is composed of 481 faces and meshFaceResult gives 482 results.
Finally, what is the link between the MESH results, the solarAdjustedMRT and the Effective Radiant field ? Is there a paper to have a detailed explanation of the method?
3. Here are some results for the ParisOrly energyplus weather data. You can find here attached the grasshopper definition.There is no shading in this simulation and the result coming from the ThermalComfort indices for MRT is very different compared to the solar adjusted MRT.Why such a big difference and which of the result should be plugged into the UTCI calculation component?
Results for ParisOrly.epwM,D,H:1,1,12
Ta : 6.5°Crh: 100%globalHorizontalRadiation: 54 Wh/m2totalSkyCover: 10MRT (TCI-11): 1.2°C
_CumSkyMtxOrDirNormRad = directNormalRadiation : 0 Wh/m2diffuseHorizontalRad: 54 Wh/m2_meanRadTemp = TasolarAdjustedMRT: 10.64°CMRTDelta: 4.14°C
_CumSkyMtxOrDirNormRad = CumulativeSkyMtxdiffuseHorizontalRad: 54 Wh/m2_meanRadTemp = TasolarAdjustedMRT: 10.47°CMRTDelta: 3.97°C
_CumSkyMtxOrDirNormRad = CumulativeSkyMtxdiffuseHorizontalRad: 54 Wh/m2_meanRadTemp = MRT (TCI-11)solarAdjustedMRT: 5.17°CMRTDelta: 3.97°C
Thanks a lot for your helpRegards,
Aymeric
…
what they really mean by that, as in what buttons to push, so I assume it's a Windows Path entry?
2.) Modify PATH
Add the install location on the path, this is usually: C:\Program File\IronPython 2.7
But on 64-bit Windows systems it is: C:\Program File (x86)\IronPython 2.7
As a check, open a Windows command prompt and go to a directory (which is not the above) and type:
> ipy -V PythonContext 2.7.0.40 on .NET 4.0.30319.225
Tutorial on setting a Windows environmental variable (path):
http://www.computerhope.com/issues/ch000549.htm
But this fails to point out that path contains many entries already separated by semicolons so if I merely add a new variable called "path" it's likely that I will destroy existing program function. There's no info on how to just tack on another entry, and the Windows 7 edit box doesn't even show the whole collection, but one item (!), so I copied the existing path into a text editor to see the whole collection successfully and added the C:\Program Files (x86)\IronPython 2.7 entry after an added semicolon, correcting for an Enthought page typo of no 's' on the end of "Program Files". I also checked the others and many pointed to old missing directories so I deleted those entries.
...and the test fails and "ipy" is not recognized as a command, even though the path now shows up using "path" in the Windows CMD window, that is if I copy all by right clicking and pasting the stuff into a text editor to really view it all. I can run it from the source directory just fine.
The rabbit hole was indeed deep. Using the Task Manager (control-alt-delete) to kill Explorer and then Run in the menu to restart "Explorer," along with restarting the Windows CMD window however, worked. I can now invoke Iron Python ("ipy") via command line from any directory. For the "path" I edited path in the System Variables and not the User Variables. No, you don't have to type that whole crazy line above just to test the path variable, just "ipy" (and control-Z to quite IronPython) in the CMD window invoked by typing "cmd" into the Start menu search box.
From the CMD line this step did work fine:
3.) ironpkg
Bootstrap ironpkg, which is a package install manager for binary (egg based) Python packages. Download ironpkg-1.0.0.py and type:
> ipy ironpkg-1.0.0.py --install
Now the ironpkg command should be available:
> ironpkg -h(some useful help text is displayed here)
But of course Step 4 fails, giving pages of what seem to be error messages;
C:\Users\Nik>ironpkg scipy
Traceback (most recent call last):
File "C:\Program Files (x86)\IronPython 2.7\lib\site-packages\enstaller\utils.
py", line 92, in write_data_from_url
File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 126, in urlo
pen
File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 397, in open
File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 509, in http
_response
...
Why can't I just download Numpy as a normal file and thus also have it easy for other users to install it when they use my scripts? This is just crazy and lazy. The Enthought developer has turned this into a computer game, with a missing registration link and then the last step spits out errors with utterly no information on how to fix it manually.
This Step 4 error is covered here:
http://discourse.mcneel.com/t/trying-to-import-numpy-in-rhino-python-but-im-getting-this-error-cannot-import-multiarray-from-numpy-core/12912/16…
Added by Nik Willmore at 2:36pm on October 11, 2015
he example file to this file so you can give it a try with any version of Honeybee that you're already using. The only requirement is to have OpenStudio installed as the component is using OpenStudio libraries to parse gbXML files. If you're using the latest version available on github the component is also available under WIP tab.
Why?
The main purpose of developing this component is to save time and effort for importing Revit models for energy and daylight analysis. It bothers me to see a lot of smart people spend a lot of time to just come up with solutions just to get the geometry from Revit to Honeybee for analysis. This component is not solving all the issue but is a first step forward. In an ideal world, the future version of Honeybee, which works both under DynamoBIM and Grasshopper should address this issue but that can take some time to be fully ready!
How?
To use this component you need to Export your Revit model as gbXML and then use the file path to load the file into Grasshopper. There are several resources available online on how to prepare the analytical model in Revit and export the gbXML file. Here is an image for importing the Revit 2017 sample model using the default settings. As you can see the model will be just as good as what your original gbXML file from Revit is.
What can be improved?
Well, there are several items that can be improved and they are mostly not on us. To get it started I add what I think are the 3 main shortcomings and my thoughts on how they can be addressed in the future. Feel free to add what you think needs to be added to this list in the comments section.
1. Revit analytical models and as the results gbXML files, by design, are not intended to be clean. Watch this presentation from the Autodesk University to see the logic behind this approach which in short is it doesn't matter for a large scale early stage energy model. Well, This will be quite a problem for studies that you can do with Honeybee. Included but not limited to daylight and comfort analysis.
The best solution that I can think of, until Autodesk fixes their exporter, is to use Revit Rooms and Spaces and generate a clean model from the scratch. We have already tried this approach in Revit but since the Revit API doesn't provide access to Room openings we had a very hard time to get it to work.
That's why that I opened an idea on Revit ideas to get over this issue. With your support we already have 81 votes, but it hasn't been enough to make them to consider the idea for an official review. If you haven't voted already and you think this will be a helpful feature take a moment and vote so we can have it implemented at some point in the future.
2. There is no way (that I know) to export only part of the model. The way export gbXML is set up in Revit is to export the whole model once together. As a result, if you have a huge model with 100 rooms and you want to get one of the rooms into Honeybee using this component you have to export the whole model, which can take some time, and then import them all back into Grasshopper. To partially address this issue I added an input to the component that allows you input a list of names for rooms that you're interested to be loaded into Grasshopper. You can use the name of the room/space in Revit as an input for the component.
3. The component doesn't import adjacencies, loads, schedules and HVAC systems. I wasn't able to export a gbXML file from Revit with any of this data except for the adjacency, but even if you can do that, the component currently can only import geometries and constructions. I hope we get access to 1 and so we don't have to use the xml file approach at all, but if that takes a very long time then we will add these features to the component.
Happy 2017!
Mostapha…
le and grasshopper timer to simplify simulation control. Double click the main Kangaroo component to open this remote. There are buttons for Stop(reset), Play, Pause, and Step (moves the simulation forward one iteration).
Line-line force - allows interaction between line segments - they are treated as rigid cylinders. As with springs, there are settings for offset and rest distance, so this can be used to simulate colliding rods, and also for keeping cylinders tangent to one another (can be used for reciprocal structures).
Gear simulator - collision between curves in a plane, can be used for various mechanical simulations - cams, gears, rack and pinions etc.
Developablize force - adjusts vertices of a mesh locally, to make angles around each interior vertex sum to 2*Pi, so the mesh can be unfolded to a flat sheet without stretching.
Volume dependent pressure force - allows you to set a rest volume for a mesh instead of just a fixed pressure. When combined with Laplacian smoothing for area minimization, this can be used to optimize for CMC (constant-mean-curvature) surfaces. It will also work on open meshes.
Translation lock - maintains a fixed relationship between a pair of points. This can be used to enforce periodic boundary conditions for TPMS.
Equalize angles force - given a set of angles (defined by 3 points each), this tries to adjust them all to become equal.
Mirror symmetry force - can be used to minimize curvature variation, and optimize for higher order curve continuity. It can also be used for simulating torsional resistance in curved rods.
True minimal surface relaxation - Laplacian smoothing force now includes an option for cotangent weighting, which optimizes for zero mean curvature, unlike spring based methods, or uniform weighted Laplacian smoothing which only roughly approximate this.
Fast sphere collide - allows much faster collision detection between large numbers of spheres. By placing these spheres at the vertices, this can also be used for collision between meshes.
Force-density element - an experimental one, more on this later
Projected-force - adjusts its strength so the component of the force in a given direction stays constant.
New mesh tools:
WarpWeft - sorts the edges of a quad mesh into warp and weft directions. This can be used to assign them different stiffness in fabric form-finding.
Checkerboard - sort the faces of a mesh into 2 lists so that 2 faces of the same colour are never adjacent.
MeshDirection - sorts the vertices of a quad mesh to give it a sort of u-v directionality
Refine Strips - subdivision in one direction only - can be used to generate developable strips
Stripper - separates out the strips of quads from a larger mesh
Unroller - unfolds a quad strip to flat without stretching
MeshMap - maps points from one mesh to another (can be used together with circle-packing to generate conformal mappings)
Reciprocal structure - generates starting geometry for a reciprocal structure from any input mesh (using the Plankton mesh library *Note* If you already have the Plankton components installed, you will need to update to version 0.3.0, which is available from here)
ReMesher - adjusts the connectivity of a mesh by flipping, splitting and collapsing edges to make all edge lengths closer to a target value
Diagonalize - creates a new face for every edge of the original mesh. Can be used on quad meshes to easily convert to a diagrid.
Refine - simple non-smoothing subdivision, splitting quads into 4 quads, and triangles into 4 triangles
QuadDivide - subdivide quads by any number squared, not just powers of 4
Corners - finds the corner vertices of a quad mesh
ByParent - simple quad subdivision, keeping the output grouped by parent face.
User objects:
The download comes with an increased collection of user objects to simplify setting up common simulation types - Including a simple to use origami simulator, a reciprocal structure generator, and a tool to generate compact circle packings from a CP mesh.
General:
Geometry input now accepts polylines and straight curves.
Hinges can now be fold completely flat in both directions.
Various other minor bug fixes and speed improvements (including much faster removeDuplicatePoints/Lines components)
*****
I've not yet updated all the documentation and example files to reflect this new version, but over time I will keep posting here with new demos and explanation of all these new features. I'll try and add a few new examples each week. Vote in the comments below if there is a feature mentioned above that you're particularly keen to hear more about soon.
No doubt there are still some bugs to be discovered. If something isn't working the way you expect or want it to, please post in this forum (ideally with a description or sketch of what you think should be happening, and a clear description of what happens instead and any error messages).
There are also some more new features that weren't quite ready to make it into this release, but are on the way shortly...
Kangaroo remains completely free, for personal, academic, and commercial use. I'm always interested to hear about projects done using it, and suggestions for improvements or additions.
Daniel
…
ne – power of the many è un corso advanced level che studia la produzione di effetti complessi a partire dalla modellazione di comportamenti semplici su un insieme strutturato con un numero alto di elementi. Attraverso un approccio generico e scaleless sarà possibile affrontare la tematica generale su più fronti e in una molteplicità di declinazioni possibili. Il corso è rivolto a chi,indipendentemente dal proprio background (urbanistica, architettura, ingegneria, design, arte o altro) già possiede una esperienza di base con Rhinoceros e Grasshopper, e desidera sviluppare aspetti di gestione avanzata del flusso di articolato di informazioni attraverso una strategia guidata basata su esempi pratici e sull’implementazione di un progetto personale sul tema generale del “field behaviour”. Sarà trattato anche l’utilizzo di alcuni plug-ins quali gHowl e WeaverBird. Il numero dei partecipanti è fissato a un massimo di 20 per offrire un tutoraggio proficuo ed una effettiva esperienza di learning ad ogni iscritto.
[.] Temi:
teoria
. complessità, emergence, effetti di campo (field behaviour), sensibilità, efficienza multiperformance
tecnica
. dati:gestione e manipolazione avanzata del data tree, streaming e visualizzazione; transizione, blending e modulazione delle geometrie; generazione e controllo multiperformance di popolazioni di componenti; attrattori, drivers e tecniche di modulazione avanzate; uso delle mesh con WeaverBird; ottimizzazione con Galapagos
[.] Dettagli :
Tutors: Alessio Erioli + Andrea Graziano – Co-de-iT
Si richiede esperienza di base nella modellazione in Rhino (equivalente a Rhino training Level 1, il Level 2 è gradito – la documentazione per il training è disponibile gratuitamente all’indirizzo: http://download.rhino3d.com/download.asp?id=Rhino4Training&language=it) e nell’uso di Grasshopper (la suddivisione di una superficie NURBS in componenti tramite isotrim è data come base assodata)
. luogo:
IreCoop – via Vasco De Gama 27 _ Firenze
. durata:
25-27 febbraio 2010 – 3 giornate consecutive _ orario 9:00 – 18:00
. costo:
professionisti – 450.00 € studenti – 280.00 €
. note:
scadenza iscrizioni: 20 febbraio 2010 il corso sarà attivato con un numero minimo di 15 iscritti al termine sarà rilasciato un attestato di frequenza gli iscritti dovrano venire muniti dei propri laptop con software installato. una versione free per 30 giorni è disponibile sul sito www.rhino3d.com
. contatti:
iscrizioni + info alloggi: www.irecooptoscana.it (Cosa offriamo > formazione > altri corsi)
info sul corso: info@co-de-it.com…
noceros 3D, en caso de aprobar satisfactoriamente el examen, se les otorga un reconocimiento avalado por el CMJ y la Secretaría del Trabajo. Este workshop va dirigido principalmente a estudiantes de arquitectura; sin embargo, ya que la parametrización es una herramienta que abarca diferentes ámbitos del diseño, se pueden integrar estudiantes de diseño industrial, artistas o estudiantes que tengan relación con lo gráfico y lo formal. Al finalizar el curso, los asistentes serán capaces de manejar Rhinoceros y Grasshopper en un nivel medio, con el objetivo de que el alumno pueda continuar aprendiendo con alguno de nuestros workshops subsiguientes o de manera autodidacta.
Las personas inscritas deben tener conocimientos básicos de geometría y de preferencia utilizar algún programa de dibujo en 2D o modelación en 3d. Rhino.GetMe Rigid // Enfocado a construir un objeto de diseño parametrizado a cualquier escala, el workshop se divide en tres módulos: Módulo 1 // Rhinoceros 3D // Una sesión de cinco horas. Módulo 2 //Grasshopper // Una sesión de cinco horas. Módulo 3 // Ejercicios prácticos /Tres sesiones de diez horas c/u. Es necesario traer el equipo necesario para trabajar, se cuenta con equipos en caso de que algún alumno no cuente con laptop pero son limitados, por favor avísanos a la brevedad si lo requieres. Se les recomienda que traigan dispositivos de almacenamiento en caso de que necesitemos compartir información.
El costo del Workshop es de $6500.00 para profesionales y $5000 pesos para estudiantes.
Pre-venta únicamente para estudiantes, hasta el día viernes 29 de junio, con un costo de $3500.00 pesos.
El cupo del evento es limitado puedes apartar tu lugar y terminar de liquidar antes del 29 de junio en pre-venta, antes del 6 de junio en admisión general.
Para hacer tu registro al workshop por favor envía un correo a workshop@transformalab.com incluyendo:
Nombre
Universidad u oficina de procedencia
Teléfono móvil
En el caso de estudiantes por favor incluyan una copia escaneada de su Constancia de Estudios para hacer válido su descuento.
Una vez recibida su información se les enviará un correo con la información necesaria para realizar su pago mediante depósito bancario, y posteriormente un mail de confirmación de su participación en el Workshop.
www.transformalab.com…
is also takes place in own system. However, this action can be also carried out successfully by a foreign reference, if this considers the focused system as own. Hence, these two criteria are considered in my reflexions, to make your criticism handier for me.
First the question must be put up, how is it in your case? Of friendly manner you answer this question perpetually with the statement that you are not a partial of the system of the architecture.
Furthermore the question would be appropriate, whether an external reference (eg CAD) determined architecture. This can be answered with no, because determining and influencing are different things.
Because you stress now your criticism as a foreign criticism, within the architecture the assuption must be put up, that this criticism is not unusual new on the one hand (because this condition were also in other times like that, and presumably also always so remain) and further more a lack of goodwill in your criticism comes to light, which perhaps distinguishes an external reference.
Based on your critique, it would be also desirable in the system of the architecture if the academic rules become satisfyingly followed, even if this is no guarantor for good academic works. Nevertheless, there is an aspect which at least tolerates the evident lack in the Interdiziplinarität of the architecture. This is the classical and still valid determination of the architecture, presumably regulates not only the actions of the architects, but also those who want to become it.
Many who stand in your criticism (the students, as well as the teachers, ... ), live in the awareness that architecture is a profession that combines as many areas around the topic of Building, and the architect is even only one dilettante among the external specialists. In this determination dilettantism is revalued rather positively, because this state the architects enables to assess the facets of a complicated building project better and to form thereby the whole result positively. To be a good architect, you should have circumspect specialists around yourself. And exactly this knows the system of the architecture, because "THE ARCHITECT" helps himself with the logic of other systems (to repair on the one hand his own deficits), and to create an artificial complexity, which ultimately aims to be the complexity of human beeing.
Here "THE ARCHITECTS" becomes a quality-spoken, which currently seems the external reference (CAD, BIM) would like to take claim for themselves.
........
If would not thought about it, this might be helpful:http://www.amazon.com/The-Alphabet-Algorithm-Writing-Architecture/dp/0262515806/ref=sr_1_1?ie=UTF8&qid=1376920450&sr=8-1&keywords=mario+carpo"Finally, I’d like to restate my criticisms in general terms. If we are serious about moving architecture and urbanism away from purely artistic considerations and into a more rational arena, there has never been a better time than now. All of us have access to immense computational power which can be applied to problems that have been —until quite recently— intractable. But of course the garbage-in-garbage-out adage holds true; computation can be used to generate large amounts of complexity, but complexity does not equal worth. The only time when it makes sense to invoke computation in the design process is when there is some relevant data that needs to be computed" (David Rutton)I want to make it short, and just ask a few questions, and hope that the following questions are relevant also for you, and not be considered outside your system. i think that the weighting to such questions seem to be more valuable, not for the architects.1. What is wrong from a pure artistic intention?2. What is any sense in purely architectural discourse?3. strictly looked, can be determined sense generally in a purely architectural discourse?4. What is purely architectural discourse?5. What is Funktionalismus or Rationalismus without philosophical support? 6. Would not be the pure functional fulfilment empty ? 7. Would be not a critical position on the promise of purely rational algorithms applied?…
hat aren’t completely there. BIM will have to continue to evolve some more if their supporters want to get to realize the promise that still is. I can’t say much about PLM, but I would say that both BIM and PLM should be considered in future developments of GH and Rhino. David has said several times that some GH limitations regarding geometry and data structures (central to interoperability) are actually Rhino limitations. So, I wouldn’t put so much pressure on David for this, or at least I would distribute the pressure also on the core Rhino development team.
Talking about Rhino vs. GH geometry, there is one (1) wish I have: support for extrusion geometry. GH already inputs extrusion elements from Rhino, but they are converted to breps. Is not a bad thing per se. The problem is when you need to bake several breps that make the Rhino file to weight several hundred MB. When these breps are actually prismatic, extrusion-like solids, is a shame that they aren’t stored as Rhino V5’s extrusion geometry in a file of just a couple of MB (I overcame this once with an inelegant RhinoScript that wasn’t good for other people). This was one of RhinoBIM’s main arguments. We can develop a structural model made of I-beams in GH using the Extrude components. We should be able to bake them as extrusions. That would also work for urban models with thousands of prismatic massing buildings (e.g. extruded footprints). Even GH’s boxes are baked as breps! Baking boxes as extrusions could be practical for voxelated or Minecraft-like models.
(2) Collaborative network support. Maybe with worksession handling, or something that aloud project team members to work on a single definition or in external references or something alike. I know there is another Rhino limitation on this, but maybe clusters are already going in that direction?
And maybe on the plug-ins domain:
(3) Remote control panel that could be really “remote”, like from other computer or device. There is an old Android App for that, but is not only a matter of updating. I mean, it would be great to control a slider with the accelerometer of an Android phone, but to have that on an iPhone will require another development team. If GH could support networks, a remote counterpart of a RCP plug-in could be developed as a cross-platform web app. I don’t know if you can access accelerometer functionality through HTML5 already, but for now, asking a client (or an spectator or any stakeholder for that matter) to control your sliders from gestures of his/her own phone would be awesome (maybe Firefly will fill that hole?).
(4) GIS support. GH already imports .shp files. Meerkat can even access the database, but what about writing to shapefiles or generating our own with databases processed/generated in GH?
(5) SketchUp support. Not only starchitects and corporations are using GH in the AEC. There are a lot of small firms, freelancers and students interested. Most of them use SketchUp for 3D modeling (not CATIA, neither Revit). Yes, you can import/export .skp from Rhino, but if GH could support nested block at bake time (also mentioned by others), it could write .skp files with complex relations of blocks (that are called components in SketchUp) and nested groups, going beyond what Rhino can export.
(6) Read/Write other formats. There are some challenges with proprietary formats that are not completely supported by Rhino, but they’re still a lot of open formats that are relevant to the fields of GH users, like stl and ply for 3D-printing. It could be nice to write mesh colors to a ply for 3D-printing a colored prototype based on GH colors. There are others, like IGES, STEP, COLLADA, etc. and 2D, like svg, odg and pdf. Some of them could offer special formatting options like custom data that the format supports but nobody uses just because is impractical to access this from direct modeling environments (but not from visual programming).
--Ernesto…
ust assume this is really what is being imported with the standard import line I see in all the examples:
# scriptcontext moduleimport RhinoPython.Host as __host'''The Active Rhino document (Rhino.RhinoDoc in RhinoCommon) while a scriptis executing. This variable is set by Rhino before the exection of every script.'''doc = None'''Identifies how the script is currently executing1 = running as standard python script2 = running inside grasshopper component3... potential other locations where script could be running'''id = 1'''A dictionary of values that can be reused between execution of scripts'''sticky = dict()def escape_test( throw_exception=True, reset=False ): "Tests to see if the user has pressed the escape key" rc = __host.EscapePressed(reset) if rc and throw_exception: raise Exception('escape key pressed') return rc def errorhandler(): ''' The default error handler called by functions in the rhinoscript package. If you want to have your own predefined function called instead of errorhandler, replace the scriptcontext.errorhandler value ''' return None…
Added by Nik Willmore at 7:47pm on October 10, 2015