len , I lost all of my work (at least the 3d modeling)
And I frankly if I want to participate I´ll need to finnish up the board and i cant do the renders on my own I need more time , but I only have until 11:59 pm of July 6 to finnish up one render, if you feel up to the challenge, whoever completes it will receive 290 dollars (its all I can give) to any account you want. I basically need one single image.
It consists on 3 towers, with an organic facade, I'm including the competition board I had saved on in my dropbox, I want more or less the same perspective shown on the left of the board.
Sorry, but i'm desperate, I had it all done but well cant control everything in life i guess, only do it if you feel you can pull off a professional render.
Thanks. (contact me and I´ll give you more info on the towers, I was able to save some limited sections and floor plans .... but yeah.. limited, so you´ll have to base your work on the images I provide here.
I can give some files now, including images of the physical model.
Board: http://i.minus.com/idYpFK844DWns.jpg
Physical model: http://imgur.com/a/PywJa
Hope its enough, I'm also including one image i had where I explored the footprints of all the buildings, but its just for reference.
I know theres barely enough time to finnish it... but I dont know what else to do, do you guys think i should probably just take a good photograph of the model and run with that? I feel that would probably look very unprofessional :l but I really dont have a choice here
…
edit 29/04/14 - Here is a new collection of more than 80 example files, organized by category:
KangarooExamples.zip
This zip is the most up to date collection of examples at the moment, and collects t
o está dirigido a estudiantes de arquitectura y diseño de interiores, recién titulados y profesionales interesados en el software o que necesiten conocer las herramientas básicas de las que dispone el programa en los diferentes ámbitos y cómo enfocarlas a arquitectura.
Descripción:El contenido del curso enseñará a utilizar el programa de diseño Rhinoceros 3D aplicando su metodología de trabajo en el campo de la arquitectura, básandose además de la creación de pequeños elementos paramétricos para controlar el diseño y acabar renderizando las geometrías 3d con V-Ray para Rhino.
El curso consta de 3 módulos de 12h de duración cada uno (que pueden realizarse juntos o por separado) en los cuales se profundizará en herramientas de Rhino, Grasshopper y V-Ray a medida que se realizan casos prácticos sobre proyectos arquitectónicos.Se pretende establecer un sistema de trabajo eficiente desde el inicio del modelado hasta la posterior creación de imágenes para documentación del proyecto.
Módulo Rhinoceros Arquitectura:• Conceptos básicos e interfaz de usuario Rhino• Introducción al sistema cartesiano en Rhino• Clases de complejidad de geometría• Importación/exportación de archivos compatibles• Topología NURBS• Trabajo con Sólidos• Estrategias básicas de Superficies• Introducción a Superficies Avanzadas
Módulo Grasshopper:• Conceptos básicos e interfaz de usuario Grasshopper• Introducción a parámetros base y componentes• Matemáticas y trigonometría como herramientas de diseño• Matemáticas aplicadas a creación de Geometría• Introducción a listas simples• Análisis de Superficies y Curvas• Dominios de Superficies y Curvas• Panelado de superficies• Manejo de listas y componentes relacionados• Modificación de panelados en función de atractores• Exportación/Importación de información a Grasshopper
Módulo V-Ray para Rhinoceros:• Conceptos básicos e interfaz de usuario V-Ray• Vistas guardadas• Materiales V-Ray• Materiales, creación y edición• Iluminación (Global Illumination, Sunlight, Lights)• Cámara Física vs Cámara default• Canales de Render• Postprocesado básico de canales
Detalles:Instructores: Alba Armengol Gasull y Oriol Carrasco (SMD Arquitectes)Idioma: CastellanoHorario: 22 JULIO al 26 JULIO 2013 // 10.00 – 14.00 / 16.00 – 20.00Organizadores: SMDLugar: SMD lab, c/Lepant 242 Local 11, 08013 Barcelona (map)
Software:Rhinoceros 5Grasshopper 0.9.00.56V-Ray 1.5 for RhinoAdobe Photoshop CS5Links de versiones de evaluación de los Softwares serán facilitadas a todos los asistentes. Se usará unica y exclusivamente la versión de Rhino para PC. Se ruega a los participantes traer su propio ordenador portátil.
Registro:Modalidad de precio reducido por tres módulos 275€Posibilidad de realizar módulos por separado 99€…
a nodi, permette di sfruttara le potenza della programmazione, senza necessariamente avere competenze avanzate.
Con Grasshopper potrete avere accesso ai segreti della modellazione generativa, un nuovo linguaggio progettuale che sta cambiando il mondo del design, a partire dalla gioielleria, fino ad arrivare all'architettura.
Durante il corso sarà possibile comprendere le caratteristiche di funzionamento del programma e applicarlo alla creazione di oggetti complessi che potranno essere stampati in 3D, oppure renderizzati. La durata è di 30 ore e alla fine del percorso verrà rilasciato il certificato McNeel.
Il Programma
Il corso spiega i concetti base di modellazione parametrica e generativa. Nello specifico:
Interfaccia e comandi
Parametri e componenti
Interopazione con Rhinoceros
Strumenti di parametrizzazione
Combinazione dati
Data tree
Creazioni di superfici attraverso algoritmi di paneling
Teoria degli attrattori
Gestione strumenti mesh
Creazione di Cluster
Durante il corso saranno proposte esercitazioni pratiche sul campo di utilizzo preferito dallo studente
Il docente
Antonino Marsala, è un formatore certificato McNeel con alle spalle oltre 11 anni di esperienza nel settore della modellazione 3D. Oltre ad occuparsi di formazione, collabora con aziende orafe e di architettura per la messa in pratica dei principi di modellazione generativa, applicandoli a casi reali.
FAQ
Quanto costa il corso?
Il prezzo del corso è di 500,00 € + IVA che potranno essere saldati in una soluzione unica. Nel caso di iscrizione di gruppo, potrà essere applicato uno sconto.
Cosa posso portare e cosa non devo portare all'evento?
Gli organizzatori forniranno computer con il software già installato. Nel caso vogliate portare il vostro computer, vi forniremo una versione trial da 90giorni di Rihnoceros e Grasshopper
Dove posso contattare l'organizzatore per qualsiasi domanda?
antonio@mandarinoblu.com
334 24 20 203
La mia registrazione o il mio biglietto è trasferibile?
Si, purchè venga comunicato il cambiamento entro 48 ore dalla partena del corso
…
analysis with Honeybee. Here is the tentative outline:
09:00 - 09:30
What is Honeybee, Introduction to daylighting simulation
09:30 - 11:00
Geometry preparation workflows, Radiance materials
11:00 - 11:10
Break
11:10 - 12:30
Sky types, Run your first simulation
12:30 - 13:30
Lunch
13:30 - 15:00
Daylighting analysis types, Result visualization, Getting started with annual daylight
15:00 - 15:15
Break
15:15 - 16:00
Annual daylight analysis and Results interpretation
Check MEBD page for more information including the registration link: http://www.mebd-penndesign.info/Honeybee-MEBD-Workshop-PennDesign
Please feel free to forward this to anyone of interest.
Cheers,
Mostapha
PS: Thank you all for the kind comments and emails for the Ladybug workshop. We recorded the workshop and are in the process of figuring out how to share it with the public. I will send an update once it is uploaded.
…
g-in, brief theory of complex systems, introduction to multi-agent systems and non-linear design, flocking, Boid library, basic examples - brownian motion, adhesion, separation, alignment, geometry following.-----------------------TIME: first session10am – GMT, London11am – Paris, Brussels, Rome, Vienna, Budapest, Bratislava, Warsaw9pm - Sidney7pm – Tokyo6pm – Beijing, Shanghai, Shenzhen, Hong Kong, Taipei3:30pm – Mumbai3pm – Karachi2pm - Samara1pm – Baghdad, Moscow, St Petersburg12pm – Istanbul, Athens, Helsinki, Cairo, JohannesburgTIME: second session3pm – GMT, London4pm – Paris, Brussels, Rome, Vienna, Budapest, Bratislava, Warsaw7pm – Dubai, Abu Dhabi, Baku6:30pm – Tehran6pm – Baghdad, Moscow, St Petersburg5pm – Istanbul, Athens, Helsinki, Cairo, Johannesburg1pm – Rio de Janeiro, São Paulo, Montevideo12pm – Buenos Aires, Santiago10am – Toronto, New York City, Bogota, Lima9am – Mexico City7am – Los AngelesWEBINARSThe rese arch Grasshopper® sessions are unique for their thorough explanation of all the features, which creates a sound foundation for your further individual development or direct use in the practice. The webinars are divided into four groups: Essential, Advanced, Iterative and Architectural. If you are a Rhinoceros 3D or Grasshopper® newcomer, you are advised to take all the Essential sessions before proceeding to the next level. If none of the proposed topics suit your needs or if you require special treatment, you can request a custom-tailored 1on1 session. All sessions are held entirely in English.The webinars are series of on-line live courses for people all over the world. The tutor broadcasts the screen of his computer along with his voice to the connected spectators who can ask questions and comment in real time. This makes webinars similar to live workshops and superior to tutorials.…
Added by Jan Pernecky at 3:36pm on February 17, 2015
ow the steps of the successful run when step 1.2 is bypassed (note that the and OpenFOAM session is open in the background while running the Butterfly demo file):
1. create wind tunnel, and use different parameters of (4,4) for _globalRefLevel_ as suggested by Theodoro in this post
2. run blockMesh:
3. run snappyHexMesh:
4. run checkMesh:
5. connect the case from checkMesh to simpleFOAM and run the simulation:
6. the simulation converged at 1865 iteration, but the results visualization part has some problem:
7. so I revised this part according to suggestions from Hagit:
8. and the results can be visualized for P and U values:
The GH file used for the successful run shown above is attached here.
Now, the following is the error I got when the case from the update fvScheme component is used for simpleFOAM simulation:
the warning message on the simpleFOAM component is:
1. Solution exception: --> OpenFOAM command Failed!#0 Foam::error::printStack(Foam::Ostream&) in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/lib/libOpenFOAM.so" #1 Foam::sigFpe::sigHandler(int) in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/lib/libOpenFOAM.so" #2 ? in "/lib64/libc.so.6" #3 double Foam::sumProd<double>(Foam::UList<double> const&, Foam::UList<double> const&) in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/lib/libOpenFOAM.so" #4 Foam::PCG::solve(Foam::Field<double>&, Foam::Field<double> const&, unsigned char) const in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/lib/libOpenFOAM.so" #5 Foam::GAMGSolver::solveCoarsestLevel(Foam::Field<double>&, Foam::Field<double> const&) const in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/lib/libOpenFOAM.so" #6 Foam::GAMGSolver::Vcycle(Foam::PtrList<Foam::lduMatrix::smoother> const&, Foam::Field<double>&, Foam::Field<double> const&, Foam::Field<double>&, Foam::Field<double>&, Foam::Field<double>&, Foam::Field<double>&, Foam::Field<double>&, Foam::PtrList<Foam::Field<double> >&, Foam::PtrList<Foam::Field<double> >&, unsigned char) const in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/lib/libOpenFOAM.so" #7 Foam::GAMGSolver::solve(Foam::Field<double>&, Foam::Field<double> const&, unsigned char) const in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/lib/libOpenFOAM.so" #8 Foam::fvMatrix<double>::solveSegregated(Foam::dictionary const&) in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/lib/libfiniteVolume.so" #9 Foam::fvMatrix<double>::solve(Foam::dictionary const&) in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/bin/simpleFoam" #10 Foam::fvMatrix<double>::solve() in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/bin/simpleFoam" #11 ? in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/bin/simpleFoam" #12 __libc_start_main in "/lib64/libc.so.6" #13 ? in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/bin/simpleFoam"
The error message from the readMe! output node is attached below as a text file.
Hope you can kindly advise what the important steps or parameters I might have missed here. I assume it might be related to OpenFOAM rather than with the Butterfly workflow...
Thank you very much!
- Ji
…
A repository of generic or complex examples.
Example 01: Attractor Values
ND_001_AttractorValues.gh
Example 02: Curve Values
ND_002_CurveValues.gh
Example 03: Point Attractor
ND_003_PointAttract