8.3.0************* IDF Context for following error/warning message:************* Note -- lines truncated at 300 characters, if necessary...************* 829 Construction,************* indicated Name=PELLE001************* Only last 10 lines before error line shown.....
************* 832 AIR WALL2, !- - Layer 2************* 833 X-LAM, !- - Layer 3************* 834 POLYSTYRENE2, !- - Layer 4************* 835 PANNELLO VIP, !- - Layer 5************* 836 POLYSTYRENE2, !- - Layer 6************* 837 X-LAM, !- - Layer 7************* 838 LANA DI ROCCIAS, !- - Layer 8************* 839 VANO IMPIANTI, !- - Layer 9************* 840 LANA DI ROCCIAS, !- - Layer 10************* 841 LASTRA IN GESSOFIBRA, !- - Layer 11** Severe ** IP: IDF line~841 Error detected for Object=CONSTRUCTION** ~~~ ** Maximum arguments reached for this object, trying to process ->LASTRA IN GESSOFIBRA<-************* IDF Context for following error/warning message:************* Note -- lines truncated at 300 characters, if necessary...************* 985 Construction,************* indicated Name=ROOF001************* Only last 10 lines before error line shown.....************* 988 TRAVETTI, !- - Layer 2************* 989 TAVOLATO, !- - Layer 3************* 990 POLYSTYRENE2, !- - Layer 4************* 991 PANNELLO VIP, !- - Layer 5************* 992 POLYSTYRENE2, !- - Layer 6************* 993 X-LAM, !- - Layer 7************* 994 LANA DI ROCCIAS, !- - Layer 8************* 995 VANO IMPIANTI, !- - Layer 9************* 996 LANA DI ROCCIAS, !- - Layer 10************* 997 LASTRA IN GESSOFIBRA, !- - Layer 11** Severe ** IP: IDF line~997 Error detected for Object=CONSTRUCTION** ~~~ ** Maximum arguments reached for this object, trying to process ->LASTRA IN GESSOFIBRA<-** Warning ** IP: Note -- Some missing fields have been filled with defaults. See the audit output file for details.** Severe ** IP: Possible incorrect IDD File** ~~~ ** IDD Version:"IDD_Version 8.3.0"** ~~~ ** Version in IDF="8.3" not the same as expected="8.3"** ~~~ ** Possible Invalid Numerics or other problems** Fatal ** IP: Errors occurred on processing IDF file. Preceding condition(s) cause termination....Summary of Errors that led to program termination:..... Reference severe error count=3..... Last severe error=IP: Possible incorrect IDD File************* Warning: Node connection errors not checked - most system input has not been read (see previous warning).************* Fatal error -- final processing. Program exited before simulations began. See previous error messages.************* EnergyPlus Warmup Error Summary. During Warmup: 0 Warning; 0 Severe Errors.************* EnergyPlus Sizing Error Summary. During Sizing: 0 Warning; 0 Severe Errors.************* EnergyPlus Terminated--Fatal Error Detected. 1 Warning; 3 Severe Errors; Elapsed Time=00hr 00min 0.34sec
My question is how i can fix it ??? and why it tell me that:
** Severe ** IP: Possible incorrect IDD File** ~~~ ** IDD Version:"IDD_Version 8.3.0"** ~~~ ** Version in IDF="8.3" not the same as expected="8.3"** ~~~ ** Possible Invalid Numerics or other problems** Fatal ** IP: Errors occurred on processing IDF file. Preceding condition(s) cause termination....Summary of Errors that led to program termination:
Help me pleaseeeeeeee
Thanks and Happy new year!!!!!…
s the "Surface Populating" definition: I manage to populate my geometry over the surface, but after I bake it, I have to delete the boxes that define my components limits as well! Is there any way of populating and baking only the chosen component, without having to delete the boxes afterwards?
Secondly:
Basically: I am trying to cover a surface with two types of components [ an open one and a closed one] , which will be proliferated over my tubular surface according to the main sunlight direction.
1. I introduce the surface component.
2. I use "Divide Interval2" in order to have division into U and V.
3. i generate the target boxes [ "surfaceBox"] .
4. I use "Isotrim" ( same intervals) and "BRepArea" to find centroid of each area.
5. My "Curve" component introduces sun angle, with its "End Points".
6. I use "Vector 2Pt" to specify sun-light direction.
7. I want to measure the angle between sun-light and the surface normals, at the position of each component; after generating the centre points, I need the normals of each centre point to get the surface's points' UV, and "Evaluate" the srf at points.
8."Angle" and "Vector" components: I use them in order to evaluate the angle between the sun direction and the srf.
9. I convert this angle to degree by using a "Function" [ to see if the angle is bigger from the max.angle or not...]
10. Function "x,y" gives me boolean data.
11. Data become "Dispatch"ed...
12. Two "Morph" components , each one linked to one part of the "Dispatch" data, generate "closed" and "open" components over the srf.
The result should have been different types of components, based on the surface's curvature, diraction and sun-light direction...
I do not understand where the mistake is in this definition...
Thx in advance1
Spyros K.…
teraction for its Correlations cycle, AA Athens Visiting School scales up its design intentions in order to investigate links among discrete individual architectural systems in its 2013 version, Recharged.
Recharged with interconnectivity on different levels, the theme of investigation will revolve around the design of semi-independent design prototypes acting together to form elaborate unified results. The driving force in Cipher City: Recharged is the synergistic effect behind complex form-making systems where interactive design patterns arise out of a multiplicity of relatively simple rules.
In collaboration with the National Technical University of Athens, Cipher City: Recharged will explore participatory design and active engagement modeling and will continue building novel prototypes upon horizontal planes.
As in 2012, the design agendas of AA Athens and AA Istanbul Visiting Schools will directly create feedback on one another, allowing participation in either one or both Programmes.
Discounts
The AA offers several discount options for participants wishing to apply as a group or participants wishing to apply for both AA Istanbul and AA Athens Visiting Schools:
1. Standard application
The AA Visiting School requires a fee of £695 per participant, which includes a £60 Visiting Membership. If you are already a member, the total fee will be reduced automatically by £60 by the online payment system. Fees are non refundable.
2. Group registration
For group applications, there will be a range of discounts depending on the number of people in the group. The discounted fee will be applied to each individual in the group.
Type A. 3-6 people group: £60 (AA Membership fee) + 635*0.75 = £536.25 (25 %) Type B. 6-15 people group: £60 + 635*0.70 = £504.5 (30%) Type C. more than 15 people group: £60 + 635*0.65 = £472.75 (35%)
3. Participants attending both AA Istanbul and AA Athens | 40% discount
For people wishing to attend both AA Istanbul 2013 and AA Athens 2013, a discount of 40% will be made for each participant. (The participant will pay the £60 membership fee only once.)
£60 (AA Membership fee) + (635*0.60)*2 = £822
For more information in discounts, please visit:
http://ai.aaschool.ac.uk/athens/portfolio/discounts-2013/
Applications
The deadline for applications is 11 March 2013. A portfolio or CV is not required, only the online application form and payment. The online application can be reached from:
http://www.aaschool.ac.uk/STUDY/VISITING/athens…
Added by elif erdine at 12:33pm on December 13, 2012
.0004. [1 of 7] Writing simulation parameters...5. [2 of 6] No context surfaces...6. [3 of 6] Writing geometry...7. [4 of 6] Writing materials and constructions...8. [5 of 7] Writing schedules...9. [6 of 7] Writing loads and ideal air system...10. [7 of 7] Writing outputs...11. ...... idf file is successfully written to : c:\ladybug\unnamed\EnergyPlus\unnamed.idf12. 13. Analysis is running!...14. c:\ladybug\unnamed\EnergyPlus\eplusout.csv15. ......
Done! Read below for errors and warnings:
16. 17. Program Version,EnergyPlus, Version 8.2.7-777c1f8d79, YMD=2015.02.28 16:09,IDD_Version 8.2.718. 19. ** Warning ** IP: Note -- Some missing fields have been filled with defaults. See the audit output file for details.20. 21. ** Warning ** Version: in IDF="'8.2.7'" not the same as expected="8.2"22. 23. ** Warning ** ManageSizing: For a zone sizing run, there must be at least 1 Sizing:Zone input object. SimulationControl Zone Sizing option ignored.24. 25. ** Warning ** ManageSizing: For a plant sizing run, there must be at least 1 Sizing:Plant object input. SimulationControl Plant Sizing option ignored.26. 27. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=F73533B3C6894C67936B_GLZP_1228. 29. ** ~~~ ** Opening Surface creating error=F73533B3C6894C67936B_GLZP_12_GLZ_1230. 31. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=F73533B3C6894C67936B_GLZP_2532. 33. ** ~~~ ** Opening Surface creating error=F73533B3C6894C67936B_GLZP_25_GLZ_2534. 35. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=F73533B3C6894C67936B_GLZP_2836. 37. ** ~~~ ** Opening Surface creating error=F73533B3C6894C67936B_GLZP_28_GLZ_2838. 39. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=4BDFD67E6D0E486796CC_GLZP_940. 41. ** ~~~ ** Opening Surface creating error=4BDFD67E6D0E486796CC_GLZP_9_GLZ_942. 43. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=4BDFD67E6D0E486796CC_GLZP_1044. 45. ** ~~~ ** Opening Surface creating error=4BDFD67E6D0E486796CC_GLZP_10_GLZ_1046. 47. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=4BDFD67E6D0E486796CC_GLZP_1148. 49. ** ~~~ ** Opening Surface creating error=4BDFD67E6D0E486796CC_GLZP_11_GLZ_1150. 51. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=4BDFD67E6D0E486796CC_GLZP_1552. 53. ** ~~~ ** Opening Surface creating error=4BDFD67E6D0E486796CC_GLZP_15_GLZ_1554. 55. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=4BDFD67E6D0E486796CC_GLZP_2456. 57. ** ~~~ ** Opening Surface creating error=4BDFD67E6D0E486796CC_GLZP_24_GLZ_2458. 59. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=4BDFD67E6D0E486796CC_GLZP_2560. 61. ** ~~~ ** Opening Surface creating error=4BDFD67E6D0E486796CC_GLZP_25_GLZ_2562. 63. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=4BDFD67E6D0E486796CC_GLZP_3064. 65. ** ~~~ ** Opening Surface creating error=4BDFD67E6D0E486796CC_GLZP_30_GLZ_3066. 67. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=4BDFD67E6D0E486796CC_GLZP_3268. 69. ** ~~~ ** Opening Surface creating error=4BDFD67E6D0E486796CC_GLZP_32_GLZ_3270. 71. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=4BDFD67E6D0E486796CC_GLZP_3472. 73. ** ~~~ ** Opening Surface creating error=4BDFD67E6D0E486796CC_GLZP_34_GLZ_3474. 75. ** Warning ** GetSurfaceData: Very small surface area[2.94495E-004], Surface=F73533B3C6894C67936B_GLZP_076. 77. ** Warning ** GetSurfaceData: Very small surface area[3.84753E-004], Surface=F73533B3C6894C67936B_GLZP_178. 79. ** Warning ** GetSurfaceData: Very small surface area[9.16905E-004], Surface=F73533B3C6894C67936B_GLZP_380. 81. ** Warning ** GetSurfaceData: Very small surface area[4.96186E-004], Surface=F73533B3C6894C67936B_GLZP_482. 83. ** Warning ** GetSurfaceData: Very small surface area[2.37373E-005], Surface=F73533B3C6894C67936B_GLZP_684. 85. ** Warning ** GetSurfaceData: Very small surface area[6.35824E-004], Surface=F73533B3C6894C67936B_GLZP_786. 87. ** Warning ** GetSurfaceData: Very small surface area[5.86549E-004], Surface=F73533B3C6894C67936B_GLZP_888. 89. ** Warning ** GetSurfaceData: Very small surface area[7.63765E-004], Surface=F73533B3C6894C67936B_GLZP_1090. 91. ** Severe ** GetSurfaceData: Zero or negative surface area[-8.09566E-004], Surface=F73533B3C6894C67936B_GLZP_1292. 93. ** Warning ** GetSurfaceData: Very small surface area[1.51701E-004], Surface=F73533B3C6894C67936B_GLZP_1394. 95. ** Warning ** GetSurfaceData: Very small surface area[9.29917E-004], Surface=F73533B3C6894C67936B_GLZP_1596. 97. ** Warning ** GetSurfaceData: Very small surface area[2.94451E-004], Surface=F73533B3C6894C67936B_GLZP_1698. 99. ** Warning ** GetSurfaceData: Very small surface area[8.03294E-004], Surface=F73533B3C6894C67936B_GLZP_17100. 101. ** Warning ** GetSurfaceData: Very small surface area[6.83026E-004], Surface=F73533B3C6894C67936B_GLZP_18102. 103. ** Warning ** GetSurfaceData: Very small surface area[9.29917E-004], Surface=F73533B3C6894C67936B_GLZP_20104. 105. ** Warning ** GetSurfaceData: Very small surface area[3.19851E-005], Surface=F73533B3C6894C67936B_GLZP_21106. 107. ** Warning ** GetSurfaceData: Very small surface area[7.63765E-004], Surface=F73533B3C6894C67936B_GLZP_23108. 109. ** Severe ** GetSurfaceData: Zero or negative surface area[-4.05899E-004], Surface=F73533B3C6894C67936B_GLZP_25110. 111. ** Warning ** GetSurfaceData: Very small surface area[6.35824E-004], Surface=F73533B3C6894C67936B_GLZP_27112. 113. ** Severe ** GetSurfaceData: Zero or negative surface area[-9.91146E-004], Surface=F73533B3C6894C67936B_GLZP_28114. 115. ** Warning ** GetSurfaceData: Very small surface area[2.70158E-004], Surface=F73533B3C6894C67936B_GLZP_29116. 117. ** Warning ** GetSurfaceData: Very small surface area[3.22781E-004], Surface=F73533B3C6894C67936B_GLZP_30118. 119. ** Warning ** GetSurfaceData: Very small surface area[4.67821E-004], Surface=F73533B3C6894C67936B_GLZP_33120. 121. ** Warning ** GetSurfaceData: Very small surface area[3.22737E-004], Surface=F73533B3C6894C67936B_GLZP_34122. 123. ** Warning ** GetSurfaceData: Very small surface area[2.65634E-004], Surface=4BDFD67E6D0E486796CC_GLZP_0124. 125. ** Warning ** GetSurfaceData: Very small surface area[4.70736E-004], Surface=4BDFD67E6D0E486796CC_GLZP_1126. 127. ** Warning ** GetSurfaceData: Very small surface area[3.42507E-004], Surface=4BDFD67E6D0E486796CC_GLZP_3128. 129. ** Warning ** GetSurfaceData: Very small surface area[5.89276E-004], Surface=4BDFD67E6D0E486796CC_GLZP_4130. 131. ** Warning ** GetSurfaceData: Very small surface area[1.91146E-004], Surface=4BDFD67E6D0E486796CC_GLZP_6132. 133. ** Warning ** GetSurfaceData: Very small surface area[9.71205E-004], Surface=4BDFD67E6D0E486796CC_GLZP_7134. 135. ** Warning ** GetSurfaceData: Very small surface area[4.34494E-004], Surface=4BDFD67E6D0E486796CC_GLZP_8136. 137. ** Severe ** GetSurfaceData: Zero or negative surface area[-3.60159E-004], Surface=4BDFD67E6D0E486796CC_GLZP_9138. 139. ** Severe ** GetSurfaceData: Zero or negative surface area[-1.11946E-004], Surface=4BDFD67E6D0E486796CC_GLZP_10140. 141. ** Severe ** GetSurfaceData: Zero or negative surface area[-3.41257E-004], Surface=4BDFD67E6D0E486796CC_GLZP_11142. 143. ** Severe ** GetSurfaceData: Zero or negative surface area[-8.21483E-005], Surface=4BDFD67E6D0E486796CC_GLZP_15144. 145. ** Warning ** GetSurfaceData: Very small surface area[2.65716E-004], Surface=4BDFD67E6D0E486796CC_GLZP_16146. 147. ** Warning ** GetSurfaceData: Very small surface area[4.84044E-004], Surface=4BDFD67E6D0E486796CC_GLZP_17148. 149. ** Warning ** GetSurfaceData: Very small surface area[7.12297E-004], Surface=4BDFD67E6D0E486796CC_GLZP_19150. 151. ** Warning ** GetSurfaceData: Very small surface area[6.14324E-004], Surface=4BDFD67E6D0E486796CC_GLZP_22152. 153. ** Warning ** GetSurfaceData: Very small surface area[8.88887E-004], Surface=4BDFD67E6D0E486796CC_GLZP_23154. 155. ** Severe ** GetSurfaceData: Zero or negative surface area[-9.89060E-004], Surface=4BDFD67E6D0E486796CC_GLZP_24156. 157. ** Severe ** GetSurfaceData: Zero or negative surface area[-1.14849E-003], Surface=4BDFD67E6D0E486796CC_GLZP_25158. 159. ** Warning ** GetSurfaceData: Very small surface area[4.00479E-004], Surface=4BDFD67E6D0E486796CC_GLZP_27160. 161. ** Warning ** GetSurfaceData: Very small surface area[6.63061E-005], Surface=4BDFD67E6D0E486796CC_GLZP_28162. 163. ** Warning ** GetSurfaceData: Very small surface area[1.09018E-004], Surface=4BDFD67E6D0E486796CC_GLZP_29164. 165. ** Severe ** GetSurfaceData: Zero or negative surface area[-2.49326E-005], Surface=4BDFD67E6D0E486796CC_GLZP_30166. 167. ** Severe ** GetSurfaceData: Zero or negative surface area[-3.17446E-004], Surface=4BDFD67E6D0E486796CC_GLZP_32168. 169. ** Warning ** GetSurfaceData: Very small surface area[8.60686E-004], Surface=4BDFD67E6D0E486796CC_GLZP_33170. 171. ** Severe ** GetSurfaceData: Zero or negative surface area[-2.48515E-005], Surface=4BDFD67E6D0E486796CC_GLZP_34172. 173. ** Fatal ** GetSurfaceData: Errors discovered, program terminates.174. 175. ...Summary of Errors that led to program termination:176. 177. ..... Reference severe error count=24178. 179. ..... Last severe error=GetSurfaceData: Zero or negative surface area[-2.48515E-005], Surface=4BDFD67E6D0E486796CC_GLZP_34180. 181. ************* Warning: Node connection errors not checked - most system input has not been read (see previous warning).182. 183. ************* Fatal error -- final processing. Program exited before simulations began. See previous error messages.184. 185. ************* EnergyPlus Warmup Error Summary. During Warmup: 0 Warning; 0 Severe Errors.186. 187. ************* EnergyPlus Sizing Error Summary. During Sizing: 2 Warning; 0 Severe Errors.188. 189. ************* EnergyPlus Terminated--Fatal Error Detected. 41 Warning; 24 Severe Errors; Elapsed Time=00hr 00min 1.51sec190.…
ocessed once Grasshopper is done with whatever it's doing now.
3) Grasshopper tells the Slider object that the mouse moved and the slider works out the new value as implied by the new cursor position.
4) The slider then expires itself and its dependencies ([VB Step 1] in this case, but there can be any number of dependent objects).
5) When [VB Step 1] is expired by the slider, it will in turn expire its dependencies (VB Step 2), and so on, recursively until all indirect dependencies of the slider have been expired.
6) When the expiration shockwave has subsided, runtime control is returned to the slider object, which tells the parent document that stuff has changed and that a new solution is much sought after.
7) The Document class then iterates over all its objects (they are stored in View order, not from left to right), solving each one in turn. (Assuming the object needs solving, but since in your example ALL objects will be expired by a slider change, I shall assume that here).
8) It's hard to tell which object will get triggered first. You'd have to superimpose them in order to see which one is visually the bottom-most object, but let's assume for purposes of completeness that it's the [VB Step 1] object which is solved first.
9) [VB Step 1] is triggered by the document, which causes it to collect all the input data.
10) The input parameter [x] is asked to collect all its data, which in turn will trigger the Slider to solve itself (it got expired in step 4 remember?). This is not a tricky operation, it merely copies the slider value into the slider data structure and shouts "DONE!".
11) [x] then collects the number, stores it into its own data structure and returns priority to the [VB Step 1] object.
12) [VB Step 1] now has sufficient data to get started, so it will trigger the script inside of it. When the script completes, the component is all ready and it will tell the parent document it can move on to the next object (the iteration loop from step 7).
13) Let us assume that the slider object is next on the list, but since it has already been solved (it was solved because [VB Step 1] needed the value) it can be skipped right away, which leaves us with the last object in the document which is still unsolved.
14) [VB Step 2] will be triggered by the document in very much the same way as [VB Step 1] was triggered in step 9. It will also start by collecting all input data.
15) Since all the input data for [VB Step 2] is either defined locally or provided by an object which has already been solved, this process is now swift and simple.
16) Upon collecting all data and running the user script, the component will surrender priority and the document becomes active again.
17) The document triggers a redraw of the Grasshopper Canvas and the Rhino viewports and then surrenders priority again and so on and so forth all the way up the hierarchy until Grasshopper becomes idle again.
[end boring]
Pretty involved for a small 3-component setup, but there you have it.
To answer somewhat more directly your questions:
- The order in which objects are solved is the same as the order in which they are drawn. This is only the case at present, this behaviour may change in the future.
- Adding a delay will not solve anything, since the execution of all components is serial, not parallel. Adding a delay simply means putting everything on hold for N milliseconds.
- [VB Step 1] MUST be solved prior to [VB Step 2] because otherwise there'd be no data to travel from [GO] to [Activate]. The only tricky part here is that sometimes [VB Step 1] will be solved as part of the process of [VB Step 2], while at other times it may be solved purely on its own merits. This should not make a difference to you as it does not affect the order in which your scripts are called.
--
The Man from Scene 24…
Added by David Rutten at 4:43pm on December 10, 2009
EP output variables are to calculate outdoorAirEnergy?
Thank you very much!
Output variables on the Read EP Results component:[1] totalThermalEnergy=cooling+heating[2] thermalEnergyBalance=cooling (-)andheating (+)[3] cooling= Zone Ideal Loads Supply Air Total Cooling Energy [J](Hourly)=Zone Ideal Loads Supply Air Sensible Cooling Energy [J](Hourly)+ Zone Ideal Loads Supply Air Latent Cooling Energy [J](Hourly)[4] heating= Zone Ideal Loads Supply Air Total Heating Energy [J](Hourly)= Zone Ideal Loads Supply Air Sensible Heating Energy [J](Hourly) + Zone Ideal Loads Supply Air Latent Heating Energy [J](Hourly)[5] electricLight=Zone Lights Electric Energy [J](Hourly)[6] electricEquip=Electric Equipment Electric Energy [J](Hourly)[7] peopleGains=Zone People Total Heating Energy [J](Hourly)[8] totalSolarGain=Zone Windows Total Transmitted Solar Radiation Energy[9] infiltrationEnergy=Zone Infiltration Total Heat Gain Energy (+)andZone Infiltration Total Heat Loss Energy (-)[10] outdoorAirEnergy= ???[11] natVentEnergy=Zone Ventilation Total Heat Gain Energy (+)andZone Ventilation Total Heat Loss Energy (-)[12] operativeTemperature=Zone Operative Temperature[13] airTemperature=Zone Mean Air Temperature[14] meanRadTemperature=Zone Mean Radiant Temperature[15] relativeHumidity=Zone Air Relative Humidity[16] airFlowVolume=[infiltrationFlow] Zone Infiltration Standard Density Volume Flow Rate+[natVentFlow] Zone Ventilation Standard Density Volume Flow Rate+[mechSysAirFlow] Zone Mechanical Ventilation Standard Density Volume Flow Rate+[earthTubeFlow] Earth Tube Air Flow Volume[17] airHeatGainRate=[surfaceAirGain] Zone Air Heat Balance Surface Convection Rate+[systemAirGain] Zone Air Heat Balance System Air Transfer Rate
Output variables on the Read EP Surface Results component:[1] surfaceIndoorTemp= Surface Inside Face Temperature[2] surfaceOutdoorTemp=Surface Outside Face Temperature[3] surfaceEnergyFlow=[opaqueEnergyFlow] Surface Average Face Conduction Heat Transfer Energy+[glazEnergyFlow] Surface Window Heat Gain Energy[4] opaqueEnergyFlow =Surface Average Face Conduction Heat Transfer Energy[5] glazEnergyFlow= Surface Window Heat Gain Energy[6] windowTotalSolarEnergy=Surface Window Transmitted Solar Radiation Energy[7] windowBeamEnergy=Surface Window Transmitted Beam Solar Radiation Energy[8] windowDiffEnergy=Surface Window Transmitted Diffuse Solar Radiation Energy[9] windowTransmissivity=Surface Window System Solar Transmittance…
rested in specializing in the field of Computational design.
The workshop will help understand how Grasshopper facilitates during the design process allowing one to Generate, Automate and Manipulate data.
To Register:
Mail us at intofablab@gmail.com
Workshop Structure:
Day 01: 11 February 2019
Introduction to Computational Processes in Architecture
Understanding Grasshopper and its relation to Rhino3D
Working with fields and Grids (Supplementary readings for Architectural theory)
Spatial Concepts using Data
Day 02: 12 February 2019
Understanding Data in Grasshopper - LISTS
Managing Data in Grasshopper (Supplementary reading)
Experimentation on Massing and Architectural Forms
Day 03: 13 February 2019
Understanding Data in Grasshopper – Trees
Surface Logics (Supplementary reading)
Design Exercise and Prototyping
Day 04: 14 February 2019
Architectural Skins
Day 05: 15 February 2019
MasterClass Project
Introduction to various types of Digital Fabrications
Prototyping of works during the Workshops
Basic knowledge of Rhino 5 is required to be able to take this training.
CERTIFICATION: All participants will receive a Workshop certificate from Authorized Rhino Trainer.
3D Printing: Prototyping of works during the Workshops
Workshop Tutor:
Kavitha M, an Architect and Computational Designer, 3D Printing Specialist is also the co-founder of INTO Design Research, will head the Computational Process in Architecture using Grasshopper workshop. Graduated from Stadelschule Architecture class with Masters in Advanced Architecture Design, has been researching on teaching methodologies on digital tools and their influence on Design thinking.…
rights to register the "mapwingis.ocx" file.Francesco, would you be patient just a tiny little bit, so that we could try something else? I would be grateful if you could.
1) Close Grasshopper and Rhino2) Run the Revo Uninstaller Pro and uninstall your MapWinGIS application along with removing all the leftovers from the registry.3) Restart your PC, and once it boots again, make sure that you are logged in as an Adminstrator.4) In your Start menu's search box type: "UAC", which will find your User Account Control Settings. Click on it, and a new window will open. Set the bar on the left to "Never notify".5) Turn off your Antivirus, which ever it is.6) Download the 64 bit version of v4.9.4.2 MapWinGIS.7) Right click on downloaded MapWinGIS-only-v4.9.4.2-x64.exe file, and choose "Properties". If there is "Unblock" button click on it, and then click on "OK". If there is no "Unblock" button, just click on "OK".8) Left double click on MapWinGIS-only-v4.9.4.2-x64.exe file and install it to "C:\dev\MapWinGIS" folder. Choose "Full installation" during installation process!9) In your Start menu's search box type: "CMD". Once the "Command prompt" appears do not left click on it! Instead right click on it, and choose "Run as Administrator".10) A command prompt window will open. Type the following command:
"your_regsvr32_folder_path\regsvr32.exe" /u /s c:\dev\mapwingis\mapwingis.ocx
If command does not result in an error message, then type this one afterwards:
"your_regsvr32_folder_path\regsvr32.exe" /s c:\dev\mapwingis\mapwingis.ocx
11) If no error appeared again, then open your Rhino and Grasshopper and check what Gismo_Gismo component prints from its "readMe!" output.If errors appeared, it would be nice if you could post their screenshots.…
Added by djordje to Gismo at 5:46am on March 27, 2017
tions or components.
Participants will learn concepts of object oriented programming and essential syntax of C# to endeavour into personally extending cad toolsets. The workshop will focus on introducing the .NET language C# and the Software Development Kit (SDK) RhinoCommon.
Topics
- use of Script Component within Grasshopper
- explanation to the .NET Framework
- introduction to RhinoCommon SDK
- basics of imperative / object-oriented programming
- data types, operators, properties
- variables, arrays, lists, enumerations
- methods
- objects, classes
- control structures: conditional statements (if, else, switch)
- control structures: loops (for, foreach, while, do)
- walk-through iterative und recursive code-samples
- use of RhinoCommon Geometry class library: creation, sorting, editing of Geometry (Points, Vectors, Curves, Surfaces)
- adding (baking) geometry to the active Rhino 3DM Document, including attributes (Name, Layer, Colors etc.)
- introduction to the Integrated Development Environment MS Visual Studio Express Edition
- compiling code to dll/gha files (plug-ins) / making your own Grasshopper custom components
Grasshopper wird auf der .NET Softwareplattform entwickelt, und kann ebenso wie das CAD Programm Rhinoceros mit "RhinoCommon", einem Software Development Kit, erweitert werden.
Dieser Kurs richtet sich an Designer, Architekten, Ingenieure und Techniker, welche mit dem grafischen Algorithmus-Modellierer "Grasshopper3d" sowie dem CAD-Programm "Rhinoceros" bereits vertraut sind und einen Einstieg in die Programmierung von Geometrie erlernen möchten.
Der Kurs Grasshopper II folgende Grundlagen:
Kennenlernen der Script Componente
Erläuterung zum .NET Framework
Einführung in RhinoCommon SDK
Grundlagen d. imperativen / objektorientierten Programmierung
Datentypen, Operatoren, Eigenschaften
Variablen, Reihen, Listen, Aufzählungen
Methoden
Objekte und Klassen
Kontrollstrukturen: Bedingte Ausführung, Schleifen
praxisnahe iterative und rekursive Code-Beispiele für generatives Design unter Verwendung der RhinoCommon Geometrie Klassenbibiliothek - Punkt- und Vektorgeometrie erstellen, sortieren, bearbeiten, Flächen und Netze erstellen - Geometrie in das Rhino 3DM Dokument baken, einschließlich Attribute (Name, Layer, Color)
Einführung in die Entwicklungsumgebung MS Visual Studio Express Edition
Kompilieren von Programmerweiterungen (plug-ins) als Komponenten (custom components)
Details, Anmeldung:
www.vhs-stuttgart.de
Trainer Peter Mehrtens
Kursdauer: 3 Tage x 8 h
Freitag, 21.02.2014, 9:00-17:00 Uhr Samstag, 22.02.2014, 9:00-17:00 Uhr Sonntag, 23.02.2014, 9:00-17:00 Uhr Ort: VHS Stuttgart, Fritz-Elsas-Str. 46/48
Teilnahmegebühr 510,00 €…