project below- should I be learning Grasshopper & Rhino or just Rhino first?
I'm trying to panel modules with low tolerances- I've prototyped regular shapes like geodesics and am now looking to experiment with irregular shapes with lots of different panel shapes.
I understand some things are best done through Grasshopper when using Paneling Tools- I'm trying to figure out if I can do what I want to achive with PT alone or should do it through Grasshopper (or some other route).
I’m on the MAC WIP - The module was built in Sketchup - all the components seem to be in order as blocks though am having problems running the ptpanel3dcustom command - thinking maybe a bug in the WIP or something wrong with my input or that I imported the sketchup file the wrong way. (I dropped it in the window) - If the 3D command is run it doesn’t do anything - if 2D (ptpanelgridcustom) it crashes.
The tileing pattern - the green rectangle is a refrence. each tile contains 4 blocks with 3 more nested in each.
How the module tiles.
The other thing I'm trying to do is specify that most of the lines in the panels don’t bend/curve when they are paneled (or something like Cage Edited). For my purposes the length & angles can change while the lines must remain straight.
These images show a test tile to be panneled on a ellipsoid. When the tile is mapped to the grid the lines curve, this is an extreme example but notice allot of tiles far from the hemespheres are also bent slightly.
These two questions have me stumped the most for now. What should I look into get a better handle on these problem areas? Maybe I should try recreating the work on a windows machine? or perhaps I should get started with Grasshopper?
Thanks for reading.
Lu…
bsp;
-Vehicle elements (3D objects and a component for custom vehicles; models from Google Warehouse)
-Traffic Velocity Graphs, drawn on every trajectory curve (allow custom graphs drawn)
-Traffic regulation elements (such as Traffic Lights and Stop Signals) and traffic density
-Particle Systems on trajectory curves, just to manage the traffic regulations and avoid collisions based on security distances
-Traffic Vehicle Animation Modes (Dots, Bounding Boxes or complex Meshes with attributes for final rendering (Giulio Piacentino´s Render Animation)
-Vehicle Lights and Vehicle Sights, to make visual studies
Team:
-Sergio del Castillo Tello (Doctor No, lead programmer)
-Everyone that wants to be involved, support.. these tools
The development of Roadrunner is planned to take part within a Research Group Program at ETSAM (University of Architecture in Madrid); This forum group is created just to test the interest of the community, while we keep on developing (it is still being tested), probably we will share the whole thing in the future. Cheers!
Traffic Cluster Scheme
Traffic Elements
Traffic Urban Systems
Vehicle Elements
Roadrunner - overview
Roadrunner 0 Basics
Roadrunner 1 Modes
Roadrunner 2 Elements
Roadrunner 3 Urban Systems…
lC_UtilEigenSystemSym (level 1) { Exception has been thrown by the target of an invocation. TargetInvocationException }
Object: MillC_UtilEigenSystemSym (level 2) { Could not load file or assembly 'Sawapansolversnet, Version=1.0.4490.29339, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified. FileNotFoundException }
Object: MillC_Topostruct2D (level 1) { Exception has been thrown by the target of an invocation. TargetInvocationException }
Object: MillC_Topostruct2D (level 2) { Could not load file or assembly 'Sawapansolversnet, Version=1.0.4490.29339, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified. FileNotFoundException }
Object: MillC_Topostruct3D (level 1) { Exception has been thrown by the target of an invocation. TargetInvocationException }
Object: MillC_Topostruct3D (level 2) { Could not load file or assembly 'Sawapansolversnet, Version=1.0.4490.29339, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified. FileNotFoundException }
Object: MillC_FEASystem (level 1) { Exception has been thrown by the target of an invocation. TargetInvocationException }
Object: MillC_FEASystem (level 2) { Could not load file or assembly 'Sawapansolversnet, Version=1.0.4490.29339, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified. FileNotFoundException }
Object: MillC_UtilFFT1D (level 1) { Exception has been thrown by the target of an invocation. TargetInvocationException }
Object: MillC_UtilFFT1D (level 2) { Could not load file or assembly 'Sawapansolversnet, Version=1.0.4490.29339, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified. FileNotFoundException }
Object: MillC_UtilFFT2D (level 1) { Exception has been thrown by the target of an invocation. TargetInvocationException }
Object: MillC_UtilFFT2D (level 2) { Could not load file or assembly 'Sawapansolversnet, Version=1.0.4490.29339, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified. FileNotFoundException }
EDIT: Even with COFF disabled in GrasshopperDeveloperSettings this still happens (Thanks Jon)
Is millipede not compatible with Rhino version 5? Or is there a different .dll to use?
Having loaded some of the components:
I congratulate you on following Rutten's 3rd law of Grasshopper :)
Although I hope the Solver and especially the Stress lines get further refinement in order to differentiate them as I find it hard to read the small label at the bottom. Maybe the Chimney's can have different numbers 3 = 3D, 2 = 2D etc.
…
make quad mesh usable with Kangaroo and with limited inputs parameters in order to simulate funicular structures like "Vaulted Willow" or "Pleated Inflation" from Marc Fornes and the Verymany.
Here is a first attempt script.
As inputs there are :
Lines_in, just lines, no duplicates, on XY plane could have Z values, but the algorithm works on a , on XY plane could have Z values, but the algorithm works on a flat representation.
Tolerance is used to glue lines when points are closer than tolerance
Width is the half width of the “roads” going through the network
Angle is the shape of the ends of the roads, 0° means flat end, 180° a totally rounded end
Deviation is the shift generating spikes or enabling to generate pleated geometry
N_u is the number of subdivision along the “roads”, image above with 3 subdivisions on the roads
N_u is the number of subdivision across the “roads”
Zbool if false everything is flat, if true the mesh is in 3d, best with angle = 180° or -180°
For the outputs there is the topology of the network (like Sandbox)
As outputs geometry are put on datatree, each branch represent a path on the road, above 3 paths, which are brep output.
Adding a diagonal there are now 4 paths so 4 branches
The mesh M goes with F which are fixed points, anchor in Kangaroo.
U and V are lines in datatree, there will be used as spring in Kangaroo, U above
This script could be used to draw sort of roads, like in here https://codequotidien.wordpress.com/2013/03/22/hemfunction/
But the primary purpose is to do that.
…
hat aren’t completely there. BIM will have to continue to evolve some more if their supporters want to get to realize the promise that still is. I can’t say much about PLM, but I would say that both BIM and PLM should be considered in future developments of GH and Rhino. David has said several times that some GH limitations regarding geometry and data structures (central to interoperability) are actually Rhino limitations. So, I wouldn’t put so much pressure on David for this, or at least I would distribute the pressure also on the core Rhino development team.
Talking about Rhino vs. GH geometry, there is one (1) wish I have: support for extrusion geometry. GH already inputs extrusion elements from Rhino, but they are converted to breps. Is not a bad thing per se. The problem is when you need to bake several breps that make the Rhino file to weight several hundred MB. When these breps are actually prismatic, extrusion-like solids, is a shame that they aren’t stored as Rhino V5’s extrusion geometry in a file of just a couple of MB (I overcame this once with an inelegant RhinoScript that wasn’t good for other people). This was one of RhinoBIM’s main arguments. We can develop a structural model made of I-beams in GH using the Extrude components. We should be able to bake them as extrusions. That would also work for urban models with thousands of prismatic massing buildings (e.g. extruded footprints). Even GH’s boxes are baked as breps! Baking boxes as extrusions could be practical for voxelated or Minecraft-like models.
(2) Collaborative network support. Maybe with worksession handling, or something that aloud project team members to work on a single definition or in external references or something alike. I know there is another Rhino limitation on this, but maybe clusters are already going in that direction?
And maybe on the plug-ins domain:
(3) Remote control panel that could be really “remote”, like from other computer or device. There is an old Android App for that, but is not only a matter of updating. I mean, it would be great to control a slider with the accelerometer of an Android phone, but to have that on an iPhone will require another development team. If GH could support networks, a remote counterpart of a RCP plug-in could be developed as a cross-platform web app. I don’t know if you can access accelerometer functionality through HTML5 already, but for now, asking a client (or an spectator or any stakeholder for that matter) to control your sliders from gestures of his/her own phone would be awesome (maybe Firefly will fill that hole?).
(4) GIS support. GH already imports .shp files. Meerkat can even access the database, but what about writing to shapefiles or generating our own with databases processed/generated in GH?
(5) SketchUp support. Not only starchitects and corporations are using GH in the AEC. There are a lot of small firms, freelancers and students interested. Most of them use SketchUp for 3D modeling (not CATIA, neither Revit). Yes, you can import/export .skp from Rhino, but if GH could support nested block at bake time (also mentioned by others), it could write .skp files with complex relations of blocks (that are called components in SketchUp) and nested groups, going beyond what Rhino can export.
(6) Read/Write other formats. There are some challenges with proprietary formats that are not completely supported by Rhino, but they’re still a lot of open formats that are relevant to the fields of GH users, like stl and ply for 3D-printing. It could be nice to write mesh colors to a ply for 3D-printing a colored prototype based on GH colors. There are others, like IGES, STEP, COLLADA, etc. and 2D, like svg, odg and pdf. Some of them could offer special formatting options like custom data that the format supports but nobody uses just because is impractical to access this from direct modeling environments (but not from visual programming).
--Ernesto…
rtitions." (http://wias-berlin.de/software/index.jsp?id=TetGen&lang=1)
To continue with my wrapping career, TetRhino (or Tetrino) is a .NET wrapper for the well-known and pretty amazing TetGen mesh tetrahedralization program. It provides one new GH component for discretizing or remeshing objects using TetGen. Basic tetrahedralization functionality is exposed with a few different output types that can be controlled. At the moment, the only control for tetrahedra sizes is the minimum ratio, which is controlled by a slider. This is hardcoded to always be above 1.0-1.1, as it is very easy to generate a LOT of data (and crash)...
The libs are divided again into different modules to allow flexibility and fun with or without Rhino and GH, so have fun. All 4 libs should be placed in a folder (maybe called 'tetgen') in your GH libraries folder. Remember to unblock.
Once again, the libs are provided as-is, with no guarantee of support for now, as I use them internally and do not intend to develop this into a shiny, polished plug-in. If there is enough interest, I can tidy up the code-base and upload it somewhere if someone more savvy than me wants to play.
TetgenGH.gha - Grasshopper assembly which adds the 'Tetrahedralize' component to Mesh -> Triangulation.
TetgenRC.dll - RhinoCommon interface to the Tetgen wrapper.
TetgenSharp.dll - dotNET wrapper for Tetgen.
TetgenWrapper.dll - Actual wrapper for Tetgen.
Obviously, credit where credit is due for this excellent and tiny piece of software:
"The development of TetGen is executed at the Weierstrass Institute for Applied Analysis and Stochastics in the research group of Numerical Mathematics and Scientific Computing." See http://wias-berlin.de/software/index.jsp?id=TetGen&lang=1 for more details about TetGen.
To wrap up, some notes about the inputs:
These are the possible integer Flags (F) values and resultant outputs for the GH component:
0 - Output M yields a closed boundary mesh. Useful for simply remeshing your input mesh.
1 - Output M yields a list of tetra meshes.
2 - Output I yields a DataTree of tetra indices, grouped in lists of 4. Output P yields a list of points to which the tetra indices correspond.
3 - Output I yields a DataTree of edge indices, grouped in lists of 2. Output P yields a list of points to which the edge indices correspond. Useful for lots of things, very easy to create lines from this to plug into K2 or something for some ropey FEA (or not so ropey!) ;)
As this component can potentially create a LOT of data, especially with dense meshes, care should be taken with the MinRatio (R) input. This will try to constrain the tetra to be more or less elongated, which also means that the lower this value gets, the more tetra need to be added to satisfy this constraint. Start with very high values and lower them until satisfactory.
Hopefully shouldn't be an issue, but it's possible that you need the 2015 Microsoft C++ Redistributable.
Happy tetrahedralizing...
UPDATE: The tetgen.zip has been updated with some fixes.
UPDATE2: This is now available on Food4Rhino: http://www.food4rhino.com/app/tetrino
…
Added by Tom Svilans at 1:27am on October 24, 2017
ion of both Ladybug and Honeybee. Notable among the new components are 51 new Honeybee components for setting up and running energy simulations and 15 new Ladybug components for running detailed comfort analyses. We are also happy to announce the start of comprehensive tutorial series on how to use the components and the first one on getting started with Ladybug can be found here:
https://www.youtube.com/playlist?list=PLruLh1AdY-Sj_XGz3kzHUoWmpWDXNep1O
A second one on how to use the new Ladybug comfort components can be found here:
https://www.youtube.com/playlist?list=PLruLh1AdY-Sho45_D4BV1HKcIz7oVmZ8v
Here is a short list highlighting some of the capabilities of this current Honeybee release:
1) Run EnergyPlus and OpenStudio Simulations - A couple of components to export your HBZones into IDF or OSM files and run energy simulations right from the grasshopper window! Also included are several components for adjusting the parameters of the simulations and requesting a wide range of possible outputs.
2) Assign EnergyPlus Constructions - A set of components that allow you to assign constructions from the OpenStudio library to your Honeybee objects. This also includes components for searching through the OpenStudio construction/material library and components to create your own constructions and materials.
3) Assign EnergyPlus Schedules and Loads - A set of components for assigning schedules and Loads from the Openstudio library to your Honeybee zones. This includes the ability to auto-assign these based on your program or to tweak individual values. You can even create your own schedules from a stream of 8760 values with the new “Create CSV Schedule” component. Lastly, there is a component for converting any E+ schedule to 8760 values, which you can then visualize with the standard Ladybug components
4) Assign HVAC Systems - A set of components for assigning some basic ASHRAE HVAC systems that can be run with the Export to OpenStudio component. You can even adjust the parameters of these systems right in Grasshopper.
Note: The ASHRAE systems are only available for OpenStudio and can’t be used with Honeybee’s EnergyPlus component. Also, only ideal air, VAV and PTHP systems are currently available but more will be on their way soon!
5) Import And Visualize EnergyPlus Results - A set of components to import numerical EnergyPlus simulation results back into grasshopper such that they can be visualized with any of the standard Ladybug components (ie. the 3D chart or Psychrometric chart). Importers are made for zone-level results as well as surface results and surfaces results can be easily separated based on surface type. This also means that E+ results can be analyzed with the new Ladybug comfort calculator components and used in shade or natural ventilation studies. Lastly, there are a set of components for coloring zone/surface geometry with EnergyPlus results and for coloring the shades around zones with shade desirability.
6) Increased Radiance and Daysim Capabilities - Several updates have also been made to the existing Radiance and Daysim components including parallel Radiance Image-based analysis.
7) Visualize HBObject Attributes - A few components have been added to assist with setting up honeybee objects and ensuing the the correct properties have been assigned. These include components to separate surfaces based on boundary condition and components to label surfaces and zones with virtually any of their EnergyPlus or Radiance attributes.
8) WIP Grizzly Bear gbxml Exporter - Lastly, the release includes an WIP version of the Grizzly Bear gbXML exporter, which will continue to be developed over the next few months.
And here’s a list of the new Ladybug capabilities:
1) Comfort Models - Three comfort models that have been translated to python for your use in GH: PMV, Adaptive, and Outdoor (UTCI). Each of these models has a “Comfort Calculator” component for which you can input parameters like temperature and wind speed to get out comfort metrics. These can be used in conjunction with EPW data or EnergyPlus results to calculate comfort for every hour of the year.
2) Ladybug Psychrometric Chart - A new interactive psychrometric chart that was made possible thanks to the releasing of the Berkely Center for the Built Environment Comfort Tool Code (https://github.com/CenterForTheBuiltEnvironment/comfort-tool). The new psychrometric chart allows you to move the comfort polygon around based on PMV comfort metrics, plot EPW or EnergyPlus results on the psych chart, and see how many hours are made comfortable in each case. The component also allows you to plot polygons representing passive building strategies (like internal heat gain or evaporative cooling), which will adjust dynamically with the comfort polygon and are based on the strategies included in Climate Consultant.
3) Solar Adjusted MRT and Outdoor Shade Evaluator - A component has been added to allow you to account for shortwave solar radiation in comfort studies by adjusting Mean Radiant Temperature. This adjusted MRT can then be factored into outdoor comfort studies and used with an new Ladybug Comfort Shade Benefit Evaluator to design outdoor shades and awnings.
4) Wind Speed - Two new components for visualizing wind profile curves and calculating wind speed at particular heights. These allow users to translate EPW wind speed from the meteorological station to the terrain type and height above ground for their site. They will also help inform the CFD simulations that will be coming in later releases.
5) Sky Color Visualizer - A component has been added that allows you to visualize a clear sky for any hour of the year in order to get a sense of the sky qualities and understand light conditions in periods before or after sunset.
Ready to Start?
Here is what you will need to do:
Download Honeybee and Ladybug from the same link here. Make sure that you remove any old version of Ladybug and Honeybee if you have one, as mentioned on the Ladybug group page.
You will also need to install RADIANCE, DAYSIM and ENERGYPLUS on your system. We already sent a video about how to get RADIANCE and Daysim installed (link). You can download EnergyPlus 8.1 for Windows from the DOE website (http://apps1.eere.energy.gov/buildings/energyplus/?utm_source=EnergyPlus&utm_medium=redirect&utm_campaign=EnergyPlus%2Bredirect%2B1).
“EnergyPlus is a whole building energy simulation program that engineers, architects, and researchers use to model energy and water use in buildings.”
“OpenStudio is a cross-platform (Windows, Mac, and Linux) collection of software tools to support whole building energy modeling using EnergyPlus and advanced daylight analysis using Radiance.”
Make sure that you install ENERGYPLUS in a folder with no spaces in the file path (e.g. “C:\Program Files” has a space between “Program” and “Files”). A good option for each is C:\EnergyPlusV8-1-0, which is usually the default locations when you run the downloaded installer.
New Example Files!
We have put together a large number of new updated example files and you should use these to get yourself started. You can download them from the link on the group page.
New Developers:
Since the last release, we have had several new members join the Ladybug + Honeybee developer team:
Chien Si Harriman - Chien Si has contributed a large amount of code and new components in the OpenStudio workflow including components to add ASHRAE HVAC systems into your energy models and adjust their parameters. He is also the author of the Grizzly Bear gbxml exporter and will be continuing work on this in the following months.
Trygve Wastvedt - Trygve has contributed a core set of functions that were used to make the new Ladybug Colored Sky Visualizer and have also helped sync the Ladybug Sunpath to give sun positions for the current year of 2014
Abraham Yezioro - Abraham has contributed an awesome new bioclimatic chart for comfort analyses, which, despite its presence in the WIP tab, is nearly complete!
Djordje Spasic - Djordje has contributed a number of core functions that were used to make the new Ladybug Wind Speed Calculator and Wind Profile Visualizer components and will be assisting with workflows to process CFD results in the future. He also has some more outdoor comfort metrics in the works.
Andrew Heumann - Andrew contributed an endlessly useful list item selector, which can adjust based on the input list, and has multiple applications throughout Ladybug and Honeybee. One of the best is for selecting zone-level programs after selecting an overall building program.
Alex Jacobson - Alex also assisted with the coding of the wind speed components.
And, as always, a special thanks goes to all of our awesome users who tested the new components through their several iterations. Special thanks goes to Daniel, Michal, Francisco, and Agus for their continuous support. Thanks again for all the support, great suggestions and comments. We really cannot thank you enough.
Enjoy!,
Ladybug + Honeybee Development Team
PS: If you want to be updated about the news about Ladybug and Honeybee like Ladybug’s Facebook page (https://www.facebook.com/LadyBugforGrasshopper) or follow ladybug’s twitter account (@ladybug_tool).
…