Firefly_firmata into my Arduino UNO board;
3. I wrote a definition with open port component and serial read (with timer) component, feeding the correct COM number and opening the port in the right time.
All components are grey, but when I connect a panel component I can't see anything but a list of nosense numbers (see attached image).
What am I doing wrong? I also downloaded files from this youtube video, but nothing...
https://www.youtube.com/watch?v=RNoAYWtky6g
I really hope in your help :) thank you in advance…
s meios acadêmicos e profissionais do Estado de Santa Catarina em parceira com a Escola de Design ELISAVA de Barcelona.
Metodologia: Mediante um exercício prático os participantes poderão ter em primeira mão uma aproximação às técnicas mais avançadas de design e fabricação digital.
Web: http://santacatarina.elisava.net/
e-mail: secretaria@sc.asbea.org.br
As atividades estão divididas em 3 etapas.
1ª etapa: Roadshow (Ciclo de Conferencias)
Palestrantes:
Affonso Orciuoli, arquiteto, professor da Escola de Design ELISAVA de Barcelona, Univesitat Ramon Llullp.d. As conferencias do Prof. Orciuoli serão através de videoconferência desde Espanha
Regiane Pupo, arquiteta, professora da UFSC, Florianópolis
As conferencias da Prof. Pupo são presenciais.
Datas:
Lages 01/11Chapecó 03/11Caçador 04/11Criciúma 07/11Baln. Camboriú 08/11Blumenau 09/11Joinville 10/11Florianópolis 11/11
Horário: 18:00 horas
Conferencia: Arquiteturas disruptivas. Design e fabricação na era digital.
Palestrante: Prof. Arq. Affonso Orciuoli | Professor ELISAVA | Barcelona
2ª etapa: Curso on-line de Rhinoceros
Durante o Roadshow será apresentado o curso on-line de Rhinoceros (http://www.rhino3d.com/).
Entre 01 e 22 de novembro serão subministrados tutoriais a todos os estudantes e professores participantes, a título de se prepararem para o workshop, ver sessão ”downloads”
3ª etapa: Workshop E-luminárias
Entre 23 e 27 de novembro de 2011, das 8:00 às 18:00 h (10 horas por dia)
Workshop Internacional (50 horas)
Diretor: Affonso Orciuoli
Professores: Regiane Pupo | Ernesto BuenoLocal: InovaLab | Sapiens Parque | Florianópolis | Santa CatarinaInvestimento: R$ 150 (estudantes) e R$ 300 (professores & profissionais)Vagas: 50Obs.: Materiais para a fabricação incluídos.
Objetivo: reunidos em grupos de 3 participantes, se desenvolverá um projeto completo de uma luminária, utilizando plataforma CAD. Posteriormente os participantes, com a ajuda dos instrutores, deverão preparar os arquivos para a fabricação na máquina fresadora e laser. Por último as luminárias serão montadas e expostas em conjunto.
Cada participante deverá trazer um laptop com os programas instalados (“demos” do Rhinoceros, RhinoNEST, outros programas de CAD também poderão ser utilizados). Todos estes programas estarão disponíveis para serem baixados a partir do site da Escola de Design ELISAVA de Barcelona.
Equipamentos presentes no workshop e à disposição dos participantes:
Máquina CNC tipo fresadora de 3 eixos
Máquina de corte a laser
Máquina de impressão 3D (a título de demonstração)…
dsheet.
The result would resemble this, but perhaps in 3 dimensions as well.
http://www.marksusser.com/images/concept/bubble_diagram_w.jpg
I was able to create the areas (circles), and connect them based on "true/false" data from an adajency matrix >http://www.fourc3.com/idthesis1112/wp-content/uploads/2011/12/Adjancy-matric.jpg
Circles were than color coded based on the number of connections (importance?)
What I am struggling to do, is find a way to spatially distribute the circles in a way that makes sense and reads well. I guess it has to do with the level and hierarchy of each entry.
This kind of shows what I trying to say: entries land on circles, and move outwards based on its level.
http://www-958.ibm.com/software/data/cognos/manyeyes/visualizations/proto-indo-european-language-tree;
I found this program, Cytoscape, which appears to be capable of doing something along these lines. Apparently, Cytoscape has a few "packing" or distributional algorithms to get the elements laid out properly. http://www.cytoscape.org/
Any idea of how something like this could be achieved in Grasshopper?
…
ontrol you mention and the blinds control discussed here:
http://www.grasshopper3d.com/group/ladybug/forum/topics/midpane-blind-in-honeybee-grasshopper?commentId=2985220%3AComment%3A1187038&xg_source=msg_com_gr_forum
I see this as something that I will need for my work this upcoming semester and so I can tell you that I will implement it within 3 months if no one else does sooner.
First on my agenda is a set of natural ventilation objects, though, which also seem to be in demand by a lot of people on this thread.
I second your call for focusing on passive strategies. I feel that the energy modeling community these days is undergoing something similar to that which happened to the aerospace industry over the last couple of decades. Namely, where all of these crazy innovative technologies were created with the aim of space exploration and yet most significant impacts that the industry has created have been in terms of satellite images and communications around Earth. Similarly, many innovative energy modelling technologies have been created with the aim of enabling digitally-controlled smart walls and vacuum insulated structures and yet the most widespread impacts have tended to be in terms of assessment of passive design strategies. The ways in which technologies are sold during development versus how they used in applications are interesting.
-Chris…
ICENSE
In order to use Geometry Gym components in Grasshopper, please run Rhino command sdrZZLicenseRequest to request free trial license.
In order to use StructDrawRhino components in Grasshopper, please run Rhino command ssiSAPZZLicenseRequest to request free trial license.
Step 3: I double click ssiBake icon and my SAP2000 V15 opens but there is no model in SAP.
I get the following Rhino command message:
Baking Structure....
SAP model updated via COM. Axis Count: 0 Node Count: 0 Elem Count: 0 Section Property Count: 0 List Count: 0.
Data not copied to Clipboard for validation by user
Step 4: If I right click on ssiBake icon and select “Open Model in SAP” it asks for a *.sdb file.
Hope you can help. Thanks again.…
e position of the bounding box would have to be re-evaluated after each iteration of the kangaroo solver.
The overall aim of this is to add a "proportions" goal to the scripts of the balloon packing discussion.
I could imagine a goal, which evaluates the bounding box of all particles in a mesh and acts on the ones that are below or above the centered domain.
Below a quick sketch of how this could work.
Best,
Leo
…
Added by Leo to Kangaroo at 8:40am on November 20, 2017
an external test suite.
We have a lot of parameters we want to test with, so doing so in Rhino is cumbersome.
To this end, we've experimenting to run Rhino/Grasshopper with a number of ways:
- 1) Using the COM interface, to create Rhino, load grasshopper then run tests
- 2) Exposing Rh/Gh internals using WCF via a Rhino command, which starts off WCF, then run tests
- 3) Exposing Rhino/Grasshopper internals using .Net remoting, again via a Rhino command
We've tried -1) that seems to be a dead end, limited access to Rh/Gh
We've tried -2) that works but raises an error in the WCF server stating that RhinoCommon is not available (see attached image). I've tried copying dll's from the Rhino installation to the running wcf directory, but that does not help.
Todo -3) We've still got to try this method.
I've googled similar entries in the forums:
http://www.grasshopper3d.com/forum/topics/how-can-i-use-grasshoper-externally
http://developer.rhino3d.com/api/rhinoscript/introduction/external_access.htm
Does anyone know why -2) wcf fails or if .net remoting will work successfully.
Or indeed if there are other options to address our use case?
Many thanks,
Milan…
aph relaxation in 3D and more). There is much more already in our GitHub repos and more to be added. For getting an idea of our future direction check this lecture out. For getting a better understanding of graphs and graph theory watch this lecture and this lecture on a gamified spatial configuration process. Stay tuned for more and do not hesitate to post Python questions in the meantime.
ps. If you are having installation problems, please check the remedy suggested below:
Comment by Iman Sheikhansari on August 26, 2019 at 8:33amDelete Comment
HiIf you are encountering a problem with rhino 6 versions don't worryFollow these steps.1. Download SYNTACTIC from https://sites.google.com/site/pirouznourian/syntactic-design2. Install it and go to the installation folder, Drag & drop SYNTACTIC(green one) over your grasshopper canvas.3. Close your rhino and reopen it. 4. Type GrasshopperDeveloperSettings5. Tick the Memory load *.GHA assemblies using COFF byte arrays option6. Run grasshopper and enjoy plugin
…
p;xg_source=msg_com_gr_forum
(Below the last post from that discussion).
***************************************
Hi Matthew, Thanks for such a swift response and sorry for the false alarm. After reinstalling Karamba the examples open without a problem.
I hoped that the examples will clarify something, unfortunately you do not use Beam Resultant Forces' output as a source of optimization criteria/objective there.
I am still having problem with the fact that Beam Resultant Forces component gives a list of zeros as a 1st output till it finishes calculation.
This is my case: 1. Karamba calculates normal forces in elements that are in the mast's traversal plane (mast sections, spreaders and wires (shrouds)). 2. Normal forces in forestays and backstays are calculated analytically elsewhere. 3. Having the normal forces in the wires, the algorithm selects the wires' diameters (having given the wires catalogue), calculates their weights and centers of gravity. 4. Objectives are: minimizing the mass and minimizing the VCG (vertical centre of gravity). They are convergent, but constraint (minimal sail area) is dealing with it. 5. The thing is that normal forces from Karamba and calculated analytically arrives at different times (Karamba need a bit more time). I tried to delay the other data (till Karamba finishes calculation) with Data Dam, Anemone's Time Buffer, Phyton/C#/VB components, but all of them caused that Octopus/Wallacei weren't working correctly.
Any idea comes to your mind how this problem might be solved?
Thanks, Mikołaj…
s para acercarse al diseño paramétrico.
El curso esta dirigido a arquitectos diseñadores e ingenieros de diseño que pretendan implementar las técnicas del modelado por parámetros dentro de sus herramientas de proyectación.
La duración de dicho curso es de 20 horas, repartidas en 6 sesiones los días lunes y miércoles de 5pm a 8:20pm, en el espacio cultural calle nueve (calle 9 # 43b-75 abajo del parque del Poblado. https://www.facebook.com/calle.nueve). El curso dará inicio el día lunes 22 de Agosto de 2011. El máximo de inscritos por curso es de 15 personas para garantizar la calidad de la enseñanza.
Este curso estará dictado por los arquitectos Ana Maria Bustamante Y David Vanegas arquitectos de la oficina de arquitectura interior137 (www.interior137.blogspot.com) que cuentan con más de dos años de experiencia en el manejo de GRASSHOPPER, y tienen una trayectoria reconocida como docentes en la Facultad de Arquitectura de la U.P.B.
Para participar en el taller los estudiantes deberán tener un computador portátil para su uso personal, durante todo el curso, además deben tener instalado el software Rhino versión 4.0 con la actualización SR9, y un conocimiento mínimo del modelado y la interfaz de este software.
Contenidos:
Sesión 1: * Introducción al modelado por parámetros y al diseño mediante algoritmos.
* Grasshopper: datos + acciones. Interface.
Sesión 2: * Datos fijos, datos variables: Parámetros.
* Puntos, Curvas parametrizables.
* Transformaciones: Mover, Rotar.
Sesión 3: * Datos múltiples (listas): Series. Rangos.
* Funciones de 1 y 2 variables.
Sesión 4: * Gestiones de datos en listas: seleccionar items, ordenarlos, desordenarlos, eliminarlos.
Sesión 5: * Atractores.
Sesión 6: * Superficies: creación de superficies, panelizaciones.
Informes e inscripciones:
Para inscribirse en el curso deberá reservar su cupo abonando el costo total del curso al menos hasta el miércoles 17 de Agosto. Este valor se devolverá totalmente únicamente en caso de cancelación del curso.
Para mayor información, póngase en contacto a través del correo electrónico interior137@gmail.com asunto: CURSO GH…