should follow the instruction which mostapha has wrote in https://github.com/mostaphaRoudsari/ladybug/blob/master/resources/I...
Instructions for Installing Ladybug + Honeybee: (Follow steps 1-6 for basic functionality and 1-11 for full functionality) 0. If you have an old version of LB+HB, download the file here (https://app.box.com/s/ds96em9l6stxpcw8kgtf) and open it in Grasshopper to remove your old Ladybug and Honeybee version. 1. Make sure that you have a working copy of both Rhino and Grasshopper installed. 2. Open Rhino and type "Grasshopper" into the command line (without quotations). Wait for grasshopper to load. 3. Install GHPython by downloading the file at this link (http://www.food4rhino.com/project/ghpython?ufh) and drag the .gha file onto the Grasshopper canvas. 4. Select and drag all of the files in the "userObjects" folder (downloaded with this instructions file) onto your Grasshopper canvas. You should see Ladybug and Honeybee appear as tabs on the grasshopper tool bar. (If you are reading this instruction on github you can download them from http://www.food4rhino.com/project/ladybug-honeybee) 5. Download the files at this link (https://app.box.com/s/bh9sbpgajdtmmystv3n4), unzip them and copy the contents to both C:\ladybug and C:\Users\[yourUsername]\AppData\Roaming\Ladybug. 6. Restart Rhino and Grasshopper. You now have a fully-functioning Ladybug. For Honeybee, continue to the following: 7. Install Radiance to C:\Radiance by downloading it from this link (https://github.com/NREL/Radiance/releases/download/4.2.2/radiance-4...) and running the exe. 6. Install Daysim to C:\DAYSIM by downloading it at this link (http://daysim.ning.com/page/download) and running the exe. 8. Install Energy Plus 8.1 to C:\EnergyPlusV8-1-0 by going to the DOE website (http://apps1.eere.energy.gov/buildings/energyplus/energyplus_downlo...), making an account, going to "download older versions of EnergyPlus, selecting 8.1 and running the exe. 9. Copy falsecolor2.exe (http://pyrat.googlecode.com/files/falsecolor2.exe) and evalglare.exe (http://www.ise.fraunhofer.de/en/downloads-englisch/software/evalgla...) to C:\Radiance\bin 10. Download the OpenStudio Libraries (https://app.box.com/s/y2sx16k98g1lfd3r47zi) and unzip them to C:\ladybug\OpenStudio. 11. You now have a fully-working version of Ladybug + Honeybee. Get started visualizing weather data with these video tutorials (https://www.youtube.com/playlist?list=PLruLh1AdY-Sj_XGz3kzHUoWmpWDX...).
It works for me..
Agus…
lass BrepDeform Inherits GH_Component Public Reslist As New List(Of String) Public Sub New() MyBase.New("BrepDeform", "Deform", _ "移动物件的控制点" & vbCrLf & "(Move the control Point to change a object)", "SEG", "Modify")
End Sub Public Overrides ReadOnly Property ComponentGuid As System.Guid Get Return New Guid("8226e0ea-ed6b-47c2-8a24-244f044152d8") End Get End Property Protected Overrides ReadOnly Property Internal_Icon_24x24() As System.Drawing.Bitmap Get Return My.Resources.SEG_BrepDeform End Get End Property Protected Overrides Sub RegisterInputParams(ByVal pManager As GH_Component.GH_InputParamManager) ' pManager.AddTextParameter("Guid", "Id", "将要被替换的犀牛物件" & vbCrLf & "(RhinoObjects that will be replaced)", GH_ParamAccess.item) 'Dim guidParam As New Param_Guid pManager.AddParameter(New Param_Guid, "Guid", "Id", "将要被替换的犀牛物件" & vbCrLf & "(RhinoObjects that will be replaced)", GH_ParamAccess.item) pManager.AddPointParameter("ControlPoint3d", "C", "控制点的位置" & vbCrLf & "(Control Point's location)", GH_ParamAccess.item) pManager.AddPointParameter("NewPoint3d", "P", "新控制点的位置" & vbCrLf & "(New Control Point's location)", GH_ParamAccess.item) pManager.AddNumberParameter("Tolerace", "T", "输入点与物件实际控制点对比的精度" & vbCrLf & "(Tolerace for the Control Point match)", GH_ParamAccess.item, 0.1)
pManager.AddBooleanParameter("BlMove", "M", "如果是True则进行移动" & vbCrLf & "(If true Perform the Move)", GH_ParamAccess.item, False)
End Sub Protected Overrides Sub RegisterOutputParams(ByVal pManager As Kernel.GH_Component.GH_OutputParamManager) pManager.AddTextParameter("Result", "RG", "结果列表" & vbCrLf & "(Result)", GH_ParamAccess.list) End Sub Public Overrides ReadOnly Property Exposure As GH_Exposure Get Return GH_Exposure.primary End Get End Property
Protected Overrides Sub SolveInstance(ByVal DA As Kernel.IGH_DataAccess) If Banner.astrict.showmessage Then Return Dim Ids As Guid = Guid.Empty 'Dim Ids As String = String.Empty Dim tpt As Point3d = Point3d.Unset, opt As Point3d = Point3d.Unset Dim tolar As Double = 0.1 Dim blMove As Boolean = False If Not DA.GetData(0, Ids) Then Return If Not DA.GetData(1, opt) Then Return If Not DA.GetData(2, tpt) Then Return If Not DA.GetData(3, tolar) Then Return If Not DA.GetData(4, blMove) Then Return If Not blMove Then GoTo line1 Reslist.Add(Now & "_未替换!(Replace failed!)") Else Reslist.Clear() ' Grasshopper.Instances.ActiveCanvas.ModifiersEnabled = False End If
' rt.AddRange(docobjlist.Select(Function(geoobj As RhinoObject) GH_Convert.ObjRefToGeometry(New ObjRef(geoobj.Id)))) 'Private Checked(5) As Boolean, Namestr() As String = {"Point", "Curve", "Brep", "Mesh", "TextDot", "TextEntity"}
Try
Dim rh As RhinoDoc = Rhino.RhinoDoc.ActiveDoc Dim rhobj As RhinoObject = rh.Objects.Find(Ids) ' Dim rhobj As RhinoObject = rh.Objects.Find(New Guid(Ids))
Dim bobj As BrepObject = CType(rhobj, BrepObject) RhinoApp.RunScript("Cancel", False) RhinoApp.RunScript("Cancel", False) bobj.Select(True)
RhinoApp.RunScript("_SolidPtOn", False) Dim gobjs As GripObject() = bobj.GetGrips ' rh.Views.RedrawEnabled = False For Each grpobj As GripObject In gobjs
If grpobj.CurrentLocation.DistanceTo(opt) < tolar Then grpobj.Select(True) Dim CurrentPln As Plane = RhinoDoc.ActiveDoc.Views.ActiveView.ActiveViewport.ConstructionPlane Dim tropt As New Point3d(opt), trtpt As New Point3d(tpt) tropt.Transform(Transform.PlaneToPlane(Plane.WorldXY, CurrentPln)) trtpt.Transform(Transform.PlaneToPlane(Plane.WorldXY, CurrentPln))
Dim movestr As String = "_move " + String.Format("{0},{1},{2} ", tropt.X, tropt.Y, tropt.Z) + String.Format("{0},{1},{2} _Cancel _Cancel", trtpt.X, trtpt.Y, trtpt.Z) RhinoApp.RunScript(movestr, True) grpobj.Select(False) End If
Next
'RhinoApp.RunScript("Cancel", False) 'RhinoApp.RunScript("Cancel", False) '' rh.Views.RedrawEnabled = True Reslist.Add(Now & "_替换成功!(Replace Success!)") Catch ex As Exception Reslist.Add(Now & "_替换失败!(Replace failed!)" & vbCrLf & ex.Message)
End Try ' Grasshopper.Instances.ActiveCanvas.ModifiersEnabled = True
line1: DA.SetDataList(0, Reslist) End Sub
'Private Sub Testt_PingDocument(sender As IGH_DocumentObject, e As GH_PingDocumentEventArgs) Handles Me.PingDocument ' Dim Mbool = Aggregate bcbool In Checked Into cb = Any(bcbool)
' If Not Mbool Then ' Checked(0) = True ' Message = Namestr(0) ' Order = 0 ' End If 'End Sub
End Class
The picture below shows the two question.
Question One I must use data dam, or the component can't batch deal the brep. I don't know why, I have You can give me a solution to make it working normal not using the data dam
Question Two I can not uset the Button component, If I use it, the gh canvas will die with some mouse event--. I have see this problem before in this forum,but there is no solution and explain. I want to know why and How to solve it.
I don't know if I have made my question clear,if not give a message. Thank you! Thank you all.
The gh test file and 3dm test file in the upload files.
…
tions or components.
Participants will learn concepts of object oriented programming and essential syntax of C# to endeavour into personally extending cad toolsets. The workshop will focus on introducing the .NET language C# and the Software Development Kit (SDK) RhinoCommon.
Topics
- use of Script Component within Grasshopper
- explanation to the .NET Framework
- introduction to RhinoCommon SDK
- basics of imperative / object-oriented programming
- data types, operators, properties
- variables, arrays, lists, enumerations
- methods
- objects, classes
- control structures: conditional statements (if, else, switch)
- control structures: loops (for, foreach, while, do)
- walk-through iterative und recursive code-samples
- use of RhinoCommon Geometry class library: creation, sorting, editing of Geometry (Points, Vectors, Curves, Surfaces)
- adding (baking) geometry to the active Rhino 3DM Document, including attributes (Name, Layer, Colors etc.)
- introduction to the Integrated Development Environment MS Visual Studio Express Edition
- compiling code to dll/gha files (plug-ins) / making your own Grasshopper custom components
Grasshopper wird auf der .NET Softwareplattform entwickelt, und kann ebenso wie das CAD Programm Rhinoceros mit "RhinoCommon", einem Software Development Kit, erweitert werden.
Dieser Kurs richtet sich an Designer, Architekten, Ingenieure und Techniker, welche mit dem grafischen Algorithmus-Modellierer "Grasshopper3d" sowie dem CAD-Programm "Rhinoceros" bereits vertraut sind und einen Einstieg in die Programmierung von Geometrie erlernen möchten.
Der Kurs Grasshopper II folgende Grundlagen:
Kennenlernen der Script Componente
Erläuterung zum .NET Framework
Einführung in RhinoCommon SDK
Grundlagen d. imperativen / objektorientierten Programmierung
Datentypen, Operatoren, Eigenschaften
Variablen, Reihen, Listen, Aufzählungen
Methoden
Objekte und Klassen
Kontrollstrukturen: Bedingte Ausführung, Schleifen
praxisnahe iterative und rekursive Code-Beispiele für generatives Design unter Verwendung der RhinoCommon Geometrie Klassenbibiliothek - Punkt- und Vektorgeometrie erstellen, sortieren, bearbeiten, Flächen und Netze erstellen - Geometrie in das Rhino 3DM Dokument baken, einschließlich Attribute (Name, Layer, Color)
Einführung in die Entwicklungsumgebung MS Visual Studio Express Edition
Kompilieren von Programmerweiterungen (plug-ins) als Komponenten (custom components)
Details, Anmeldung:
www.vhs-stuttgart.de
Trainer Peter Mehrtens
Kursdauer: 3 Tage x 8 h
Freitag, 21.02.2014, 9:00-17:00 Uhr Samstag, 22.02.2014, 9:00-17:00 Uhr Sonntag, 23.02.2014, 9:00-17:00 Uhr Ort: VHS Stuttgart, Fritz-Elsas-Str. 46/48
Teilnahmegebühr 510,00 €…
ocessed once Grasshopper is done with whatever it's doing now.
3) Grasshopper tells the Slider object that the mouse moved and the slider works out the new value as implied by the new cursor position.
4) The slider then expires itself and its dependencies ([VB Step 1] in this case, but there can be any number of dependent objects).
5) When [VB Step 1] is expired by the slider, it will in turn expire its dependencies (VB Step 2), and so on, recursively until all indirect dependencies of the slider have been expired.
6) When the expiration shockwave has subsided, runtime control is returned to the slider object, which tells the parent document that stuff has changed and that a new solution is much sought after.
7) The Document class then iterates over all its objects (they are stored in View order, not from left to right), solving each one in turn. (Assuming the object needs solving, but since in your example ALL objects will be expired by a slider change, I shall assume that here).
8) It's hard to tell which object will get triggered first. You'd have to superimpose them in order to see which one is visually the bottom-most object, but let's assume for purposes of completeness that it's the [VB Step 1] object which is solved first.
9) [VB Step 1] is triggered by the document, which causes it to collect all the input data.
10) The input parameter [x] is asked to collect all its data, which in turn will trigger the Slider to solve itself (it got expired in step 4 remember?). This is not a tricky operation, it merely copies the slider value into the slider data structure and shouts "DONE!".
11) [x] then collects the number, stores it into its own data structure and returns priority to the [VB Step 1] object.
12) [VB Step 1] now has sufficient data to get started, so it will trigger the script inside of it. When the script completes, the component is all ready and it will tell the parent document it can move on to the next object (the iteration loop from step 7).
13) Let us assume that the slider object is next on the list, but since it has already been solved (it was solved because [VB Step 1] needed the value) it can be skipped right away, which leaves us with the last object in the document which is still unsolved.
14) [VB Step 2] will be triggered by the document in very much the same way as [VB Step 1] was triggered in step 9. It will also start by collecting all input data.
15) Since all the input data for [VB Step 2] is either defined locally or provided by an object which has already been solved, this process is now swift and simple.
16) Upon collecting all data and running the user script, the component will surrender priority and the document becomes active again.
17) The document triggers a redraw of the Grasshopper Canvas and the Rhino viewports and then surrenders priority again and so on and so forth all the way up the hierarchy until Grasshopper becomes idle again.
[end boring]
Pretty involved for a small 3-component setup, but there you have it.
To answer somewhat more directly your questions:
- The order in which objects are solved is the same as the order in which they are drawn. This is only the case at present, this behaviour may change in the future.
- Adding a delay will not solve anything, since the execution of all components is serial, not parallel. Adding a delay simply means putting everything on hold for N milliseconds.
- [VB Step 1] MUST be solved prior to [VB Step 2] because otherwise there'd be no data to travel from [GO] to [Activate]. The only tricky part here is that sometimes [VB Step 1] will be solved as part of the process of [VB Step 2], while at other times it may be solved purely on its own merits. This should not make a difference to you as it does not affect the order in which your scripts are called.
--
The Man from Scene 24…
Added by David Rutten at 4:43pm on December 10, 2009
. From the Thermal Comfort Indices component, Comfort Index 11 (TCI-11):MRT = f(Ta, Tground, Rprim, e)
with:- Ta = DryBulbTemperature coming from ImportEPW component- Tground = f(Ta, N) where N comes from totalSkyCover input. Tground influences the long-wave radiation emitted by the ground in the MRT calculation.- Rprim defined as solar radiation absorbed by nude man = f(Kglob, hS1, ac)- ac is the clothingAlbedo in % (bodyCharacteristics input)- I can't find any definition in the code of Kglob and hS1. Could you tell me please what are those values referencered to? --> probably the globalHorizontalRadiation but how?- e = vapour pressure calculated from Ta and Relative Humidity input
Do you agree that in this case the MRT does not depend on these inputs: location, meanRadiantTemperature, dewPointTemperature and wind speed?It does not depend neither on the other bodyCharacteristics like bodyPosture, age, sex, met, activityDuration...?
MRT calculated by the TCI-11 method is the mean radiant temperature of a vector pointing vertically with a sky view factor of 100%?For ParisOrly epw,
2. From the SolarAdjustedTemperature component (that seems to be more used for the UTCI calculation examples on Hydra compared to TCI-11).
In contrast to the TCI-11, this component distinguishes diffuse and direct radiation and contextualizes the calculation thanks to _ContextShading input, right? It can also be applied to a mannequin thanks to the CumSkyMatrix and thus evaluate the dishomogeneity of radiation exposure.This component seems not to consider the influence of vapour pressure on the result --> is it then more precise to put the MRT output (from the TCI) as an input of meanRadTemperature for SolarAdjustedTemperature?The default groundReflectivity is set to 0.25 --> is GroundReflectivity taken into account in the Tground or MRT calculation in the TCI component? If yes, what is the hypothesised groundReflectivity?The default clothing albedo of 37% (TCI-11 bodyCharacteristics) corresponds to Clothing Absorptivity of 63%?
If the CumSkyMatrix input is not supplied, I get 9 results for the mannequin --> where are those points/results coming from?
If the CumSkyMatrix input is supplied,I suppose the calculation of the 482 results correspond to a calculation method similar to the radiation analysis component that is averaged over the analysis period. Right?But I don't understand why the mannequin is composed of 481 faces and meshFaceResult gives 482 results.
Finally, what is the link between the MESH results, the solarAdjustedMRT and the Effective Radiant field ? Is there a paper to have a detailed explanation of the method?
3. Here are some results for the ParisOrly energyplus weather data. You can find here attached the grasshopper definition.There is no shading in this simulation and the result coming from the ThermalComfort indices for MRT is very different compared to the solar adjusted MRT.Why such a big difference and which of the result should be plugged into the UTCI calculation component?
Results for ParisOrly.epwM,D,H:1,1,12
Ta : 6.5°Crh: 100%globalHorizontalRadiation: 54 Wh/m2totalSkyCover: 10MRT (TCI-11): 1.2°C
_CumSkyMtxOrDirNormRad = directNormalRadiation : 0 Wh/m2diffuseHorizontalRad: 54 Wh/m2_meanRadTemp = TasolarAdjustedMRT: 10.64°CMRTDelta: 4.14°C
_CumSkyMtxOrDirNormRad = CumulativeSkyMtxdiffuseHorizontalRad: 54 Wh/m2_meanRadTemp = TasolarAdjustedMRT: 10.47°CMRTDelta: 3.97°C
_CumSkyMtxOrDirNormRad = CumulativeSkyMtxdiffuseHorizontalRad: 54 Wh/m2_meanRadTemp = MRT (TCI-11)solarAdjustedMRT: 5.17°CMRTDelta: 3.97°C
Thanks a lot for your helpRegards,
Aymeric
…
our own, understand third-party tutorials and process to the advanced sessions.
register for 29€/3hrs
GMT: SAT, 13 DEC 2014 @ 3:00PM / 29€
Introduction to vectors, vectors vs. points, vector addition, cross product, dot product, vector operations, vector display, practical use, planes/frames, normals.
Introduction to domains, t parameter, evaluate curve, boundaries, remap, reparametrize, UV coordinates, evaluate surface.
GMT: SUN, 14 DEC 2014 @ 3:00PM / 29€
Introduction to data trees, graft, flatten, unflatten, tree statistics, cherry picker, simplify, shift path, path mapper, tree item, tree items.
WEBINARS
The webinars are series of on-line live courses for people all over the world. The tutor broadcasts the screen of his computer along with his voice to the connected spectators who can ask questions and comment in real time. This makes webinars similar to live workshops and superior to tutorials. The rese arch Grasshopper® sessions are unique for their thorough explanation of all the features, which creates a sound foundation for your further individual development or direct use in the practice. All sessions are held entirely in English.
PAST EVENTS
…
Added by Jan Pernecky at 2:27am on December 11, 2014
ange’ for its 2016 cycle, as a starting point to investigate principles of natural formation processes and interpret them as innovative architectonic spaces. These concepts are carefully interwoven with spatial, performance-based, and structural criteria in order to create full-scale working prototypes.
The three-week long programme is formulated as a two-phase process. During the two-week initial phase, participants benefit from the unique atmosphere and facilities of AA’s London home. The second phase, lasting for a week, shifts to AA’s woodland site in Hooke Park and revolves around the robotic fabrication and assembly of a full-scale architectural intervention.
Prominent Features of the programme:
• Teaching team: Participants engage in an active learning environment where the large tutor to student ratio (5:1) allows for personalized tutorials and debates.
• Facilities: AA Digital Prototyping Lab (DPL) offers laser cutting, CNC milling, and 3d printing facilities. The facilities at AA Hooke Park allow for the fabrication of one-to-one scale prototypes with a 3-axis CNC router, various woodworking power tools, and robotic fabrication.
• Computational skills: The toolset of Summer DLAB includes but is not limited to Rhinoceros, Processing, Grasshopper, and various analysis tools.
• Theoretical understanding: The dissemination of fundamental design techniques and relevant critical thinking methodologies through theoretical sessions and seminars forms one of the major goals of Summer DLAB.
• Professional awareness: Participants ranging from 2nd year students to PhD candidates and full-time professionals experience a highly-focused collaborative educational model which promotes research-based design and making.
• Robotic Fabrication: According to the specific agenda of each year, scaled working models are produced via advanced digital machining tools, followed by the fabrication of a one-to-one scale prototype with the Kuka KR150 robot.
• Lecture series: Taking advantage of its unique location, London, Summer DLAB creates a vibrant atmosphere with its intense lecture programme.
Eligibility: The workshop is open to architecture and design students and professionals worldwide.
Accreditation: Participants receive the AA Visiting School Certificate with the completion of the Programme.
Applications: The AA Visiting School requires a fee of £1900 per participant, which includes a £60 Visiting Membership fee. A deposit of £381 is required when registering with the online form. The deadline for applications is 11 July 2016. No portfolio or CV is required. Online application link:
https://www.aaschool.ac.uk/STUDY/ONLINEAPPLICATION/visitingApplication.php?schoolID=392
Return train tickets between London-Hooke Park, accommodation & food in Hooke Park, and materials from Digital Prototyping Lab (DPL) are included in the fees.
For inquiries, please contact:
elif.erdine@aaschool.ac.uk (Programme Director)
alexandros.kallegias@aaschool.ac.uk (Programme Director)
…