sinergetici associati alla compresenza simultanea di differenti strumenti di analisi e digital design all'interno di un processo di progettazione in svolgimento. I partecipanti utilizzeranno Grasshopper (modellatore parametrico per Rhino): l'uso di questo editor grafico di algoritmi si integra alla perfezione con gli strumenti di modellazione di Rhinoceros 3D espandendo le possibilità di corstruire modelli parametrici altamente complessi. Per generare una complessità simile saranno utilizzati collegamenti live ai diversi programmi elencati di seguito: . Autodesk Ecotect Analysis via GECO . FEA software GSA via SSI Durante questi intensi 3 giorni, i partecipanti impareranno il workflow dei plug-ins con l'aiuto di esempi esplorando una panoramica dei differenti software, le possibilità di testare le performances di un progetto o l'uso di strumenti addizionali non legati ad un singolo sistema (es. accentuazione, formazione, reazione parametrica) [english text] The focus of the workshop is to integrate and correlate the synergistic effect associated with simultaneous presence of different digital design- and analysis tools in an ongoing design process. The main attention is set on easy to handle interface , which should be used at a early stage of conceptual design to respond to external and internal influences in a intelligent and sustainable way. Participants will use the software Grasshopper as a parametric modeling plug-in for Rhino. The usage of this graphical algorithm editor tightly integrated with Rhino's 3-D modeling tools open up the possibility to construct highly parametrical complex models. To generate this complexity we will use live linkages to several programs listed below: . Autodesk Ecotect Analysis via GECO . FEA software GSA via SSI In this 3 intense days, the participants should learn the workflow of the plug-ins with the help of examples and get an overview of the different software's, there possibilities for evaluating the performance of a design or the usage of additional tools to be not chained to a single system . (e.g. parametrical accentuation, parametrical formation, parametrical reaction) [.] Dettagli : Istruttori: Thomas Grabner & Ursula Frick from [uto]. lingua del corso: inglese (saranno disponibili tutor di supporto ma è richiesta una conoscenza di base della lingua unglese).
Quote d'iscrizione (min 12 max 20 posti): educational* : € 280.00 + iva professional: € 450.00 + iva * studenti, docenti, ricercatori, dottorandi e laureati fino a un anno dalla data di laurea OFFERTA EARLY BIRD SPECIAL: le prime 5 domande di iscrizione pervenute entro il 31 Dicembre 2011 avranno diritto ad una quota di iscrizione scontata del 20% Quote d'iscrizione E.B. SPECIAL: E.B. SPECIAL educational* : € 224.00+ iva E.B. SPECIAL professional: € 360.00+ iva. ulteriori info, dettagli e iscrizioni: http://www.co-de-it.com/wordpress/nexus-advanced-grasshopper-workshop-with-uto.html…
d the workshop PDF from this link: http://goo.gl/bcvRNH Download event poster from this link: http://goo.gl/Q0KWCM Brief: Cairo is filled with barriers controlling people movements, suppressing them as well as detaining green and public spaces to the extent that most people have been taking these spaces for granted. Public spaces have been for a while the periphery of our daily life. We will explore in this workshop how we can manipulate and alter people’s perception and direct their attention to how these spaces are integral for city life. This exploration will be backed up by intensive technical tutorials introducing computational design and fabrication techniques and tools mainly Rhino, Grasshopper, Geco and Ecotect. Not only will this be the typical technical workshop, but rather you will also have the chance to be guided step by step on how these tools are used through out different design stages in a real world scenario. Design prototypes will be produced through 3D printing, the main workshop output will be a fabricated one to one functional model for one of the designs using our new in-house CNC machine. Tutors (check the PDF for bio): Olga Kovrikova, MArch DIA Alexandr Kalachev, MArch DIA Karim Soliman, MArch DIA Islam Ibrahim, MArch DIA Sherif Tarabishy, B.Sc. AAST Application: Application deadline 1 September 2013 ** For students (undergrad / Master), teachers and PhD proof of status is required (university ID with a date or a certificate of enrollment) to apply for the students package. Packages (choose one of the following in the application form): 1. Standard registration Course fee is 4250 EGP For Students 3500 EGP 2. Early bird registration discounted fee For Professionals 3750 EGP For Students 3000 EGP ** Early bird offer ends on 14 August 2013 3. Group registrations discounted fee (5 or more) For Students 20% off - You will have to fill out an application form here: http://goo.gl/0QxAga - You will need to submit your CV and Short Portfolio (max. 10 MB) to info@morph-d.com, email subject: “Morphing Norms Application” (we will decide if you are eligible for an early bird discount or not based on the date of your email submission) - We will confirm receiving emails from all applicants. Successful applicants will be contacted 5 days after each deadline (early bird/final) and will have to confirm participation within 3 days, if they fail to do so, places will be given to others on the waiting list. - A maximum of 30 applicants will be selected.
…
ow..
It's basically using a 3d framework to define points on the framework and then interpolate curves through them.
Right now Im assuming that I merely translated something incorrectly early in the script that lead to most of the definition issues later on...?? It also seems I am not using the append function correctly... :(
If anybody well versed could take a look it would be awesome... :)
The code I've used is below and the erros I get are attached here:
Private Sub RunScript(ByVal ptSetA As List(Of Point3d), ByVal ptSetB As List(Of Point3d), ByVal divU As Integer, ByVal divV As Integer, ByRef A As Object, ByRef B As Object) Dim n As Integer = 0 Dim ptListA As New List(Of list(Of Point3d)) Dim ptListB As New List(Of list(Of Point3d)) For i As Integer = 0 To divU Dim ptRowA As New List(Of Point3d) Dim ptRowB As New list(Of point3d) For j As Integer = 0 To divV Dim ptA As New Point3d(ptSetA(n)) Dim ptB As New point3d(ptSetB(n)) ptRowA.Add(ptA) ptRowB.Add(ptB) n = n + 1 Next ptListA.Add(ptRowA) ptListB.Add(ptRowB) Next Dim intcvListA As New List(Of NurbsCurve) For i As Integer = 0 To divU - 1 Step 2 For j As Integer = 0 To divV - 1 Step 1 Dim pt01A As New point3d((ptListA(i)(j) + ptListA(i)(j + 1)) / 2) Dim pt01A As New point3d((ptListA(i + 1)(j) + ptListB(i + 1)(j)) / 2) Dim pt01A As New point3d((ptListA(i + 2)(j) + ptListA(i + 2)(j + 1)) / 2) Dim pt01A As New point3d((ptListA(i + 1)(j) + ptListA(i + 1)(j + 1)) / 2) Dim dis01A As Double = pt01A.DistanceTo(pt04A) Dim dis02A As Double = pt03A.DistanceTo(pt04A) Dim vt01A As New Vector3d((pt04A - pt01A) / dis01A) Dim vt02A As New Vector3d((pt03A - pt04A) / dis02A) Dim pt01B As New point3d((ptListB(i)(j) + ptListB(i)(j + 1)) / 2) Dim pt01B As New point3d((ptListA(i + 1)(j) + ptListB(i + 1)(j)) / 2) Dim pt01B As New point3d((ptListB(i + 2)(j) + ptListB(i + 2)(j + 1)) / 2) Dim pt01B As New point3d((ptListB(i + 1)(j) + ptListB(i + 1)(j + 1)) / 2) Dim dis01B As Double = pt01B.DistanceTo(pt04B) Dim dis02B As Double = pt03B.DistanceTo(pt04B) Dim vt01B As New Vector3d((pt04B - pt01B) / dis01B) Dim vt02B As New Vector3d((pt03B - pt04B) / dis02B) Dim ptArrA As New List(Of Point3d) ptArrA.Append(pt01A) ptArrA.Append(pt02A) ptArrA.Append(pt03A) Dim intcvA As New NurbsCurve() intcvA = CreateInterpolatedCurve(ptArrA, 3) intcvListA.Add(intcvA) Dim ptArrB As New List(Of Point3d) ptArrB.Append(pt01B) ptArrB.Append(pt02B) ptArrB.Append(pt03B) Dim intcvB As New NurbsCurve() intcvB = CreateInterpolatedCurve(ptArrB, 3) intcvListB.Add(intcvB) Next Next A = intcvListA…
ake a network of lines (i.e. a graph) and make a Plankton Mesh, from which you can use Cytoskeleton to make a solid mesh (and then smooth it with Weaverbird).
Works with ngons (polygons with 3 or more sides). Other examples I found only worked with tris and quads.
Works on open or closed surfaces
While these examples start with a surface, you could start with a network of lines and make a patch surface
This is meant for 2D networks/surfaces. I haven't attempted filling a 3D volume. My guess is this wouldn't work as it would require a non-manifold mesh that Plankton wouldn't handle.
Note similar results could be achieved with the following:
TSplines
MeshDual (dual of a tri mesh, not as much freedom/control)
Working backwards, here is the GhPython script from Will Pearson that builds a Plankton Mesh from vertices and faces. The vertices are a list of 3D coordinates, the faces are a tree a lists, with each list containing the indices of vertices that form a closed loop. From Will, "Plankton only handles manifold meshes, i.e. meshes which have a front and a back. This orientation is determined by the "right-hand rule" i.e. if the vertices of a face are ordered counter-clockwise then the face normal will be out of the page/screen."
# V: list of Point3d # F: tree of int
import Grasshopper appdata = Grasshopper.Folders.DefaultAssemblyFolder
import clr clr.AddReferenceToFileAndPath(appdata + "Plankton.dll")
import Plankton
pmesh = Plankton.PlanktonMesh()
for pt in V: pmesh.Vertices.Add(pt.X, pt.Y, pt.Z)
for face in F.Branches: face = list(face)[:-1] pmesh.Faces.AddFace(face)
These vertices and faces are precisely the output from Starling. Starling takes in a list of Polylines which form the (properly oriented) face loops.
The polyline face loops can be generated...
Directly from Panels on a surface using LunchBox
Using any network of lines/curves on a surface (curves will need to be converted to polylines before Starling)
The latter was achieved using the Surface Split command, then converting the face edges (converted to curves) into polyline loops to represent faces.
…
hope this number will grow in future. Currently available features are:
1) Creation of 2d or 3d context for any kind of building related analysis: automatically generate the 2d/3d surrounding buildings for the location where you would like to perform visibility, solar radiation, cfd or any other type of analysis. You need some other plugin for the last three, like Ladybug. It only creates the context=surroundings! The "automatic generation" process also includes creation of the local topography (terrain) along with buildings.
2) Identification of certain 2d or 3d elements in the created context. For example: selection of all hotels, parks, hospitals, restaurants, residential buildings etc.
3) Performing direct terrain analysis (hillshading, slope, ruggedness, roughness, water flow...)
4) Creation of terrain shading masks and horizon files for further solar and photovoltaics analysis.
Gismo will be very grateful if he could get any suggestions, improvements, bug reports and testing in the following period. In case you are willing to provide any of these, the requirements, installation steps and .gh example files can be found here, here and here.
Thank you in advance !!…
Added by djordje to Gismo at 9:10am on January 29, 2017
onstrates the following:
1. The definition's functionality employing HumanUI for the custom user interface.
2. Color based segmentation in manual and auto modes.
3. The evaluation of the definition's ability to handle different point cloud data sets.
This definition performs color based segmentation in two modes.
A manual mode, that implements the Delta-E CIE 2000 color difference formula, for targeted feature detection. An auto mode, that employs a simple RGB Color Range algorithm for quicker preliminary results.
RGB to XYZ to CIELab conversion and Delta-E scripts were based on Colormine's project code from github. Results have been compared and verified with the results of http://colormine.org/color-converter and http://colormine.org/delta-e-calculator/Cie2000.
Each stored class is charted and can be accessed through the UI, as shown at 2:30, where Delta-E CIE 2000, in CieLab color space, output results were found to be in perceptive conformity with human eyes, far superior to the preliminary RGB implementation.
Initial definition versions could process highly subsampled clouds in acceptable timings. Further research showed that employing the multithread processing of Volvox components, bundling the Delta E formula with the RGB to CIE lab color conversion script, per color segmentation calculations for a one million points point cloud would go down from 23 (c# script component) and 8 (vb script component) seconds to approx. 1 second (volvox script cloud component), thus allowing the segmentation of less subsampled point clouds.
I would like to thank Heumann A. and Zwierzycki M. who provided direct support with HumanUI and Volvox. Also Grasshopper3d forum users Maher S. and Segeren P., who contributed with Rhino viewport manipulation scripts.
More on Volvox:
http://papers.cumincad.org/cgi-bin/works/Show?_id=ecaade2016_171&sort=DEFAULT&search=ecaade%20volvox&hits=2629
http://www.food4rhino.com/app/volvox
http://duraark.eu/
HumanUI:
http://www.food4rhino.com/app/human-ui?page=1&ufh=&etx=
ColorMine:
https://github.com/THEjoezack/ColorMine…
ns about them.
It's a direction for Kangaroo I very much intend to continue developing - and I am still getting to grips with the possibilities and experimenting with how different optimization and fairing forces work in combination with one another, so I would value your input and experience.
For those interested in some background reading material -
[1] http://www.cs.caltech.edu/~mmeyer/Research/FairMesh/implicitFairing.pdf
[2] http://mesh.brown.edu/taubin/pdfs/taubin-eg00star.pdf
[3] http://www.pmp-book.org/download/slides/Smoothing.pdf
[4] http://graphics.stanford.edu/courses/cs468-05-fall/slides/daniel_willmore_flow_fall_05.pdf
[5] http://www.evolute.at/technology/scientific-publications.html
[6] http://www.math.tu-berlin.de/~bobenko/recentpapers.html
[7] http://spacesymmetrystructure.wordpress.com/2011/05/18/pseudo-physical-materials/
[8] http://www.evolute.at/technology/scientific-publications/34.html
[9] http://www.evolute.at/software/forum/topic.html?id=18
At the moment the Laplacian smoothing is uniformly weighted, which tends to even out the edge lengths as well as smoothing the form, which is sometimes desirable, and sometimes not. It also tends to significantly shrink meshes when the edges are not fixed.
I plan to try some of the other weighting possibilities, such as Fujiwara or cotangent weighting (see [1] and [3]), as well as other fairing approaches, such as Taubin smoothing [2], Willmore flow[4], and so on. This also has applications in the simulation of bending of thin shells.
Planar quad panels are often desirable, but I'm finding that planarization forces alone are sometimes unstable, or cause undesirable crumpling, so need to be combined with some sort of fairing/smoothing, but the different types have quite different effects, and the balance is sometimes tricky.
There's also the whole issue of meshes which are circular (I posted a demo of circularization on the examples page), or conical (this one still isn't working quite right yet), and their relationship with principal curvature grids and placement of irregular vertices, all of which is rather different when the whole form is up for change, rather than having a fixed target surface [7].
I'm also trying to get to grips with ways of making surfaces of planar hexagons, which need to become concave in regions of negative Gaussian curvature (see this discussion)
and I hope to release soon a component for calculating CP meshes, as described in [8], which I think could have many exciting construction implications.
While there are a number of well developed smoothing algorithms, their main area of application so far seems to be in processing and improving 3D scan data, so using them in design in this way is somewhat new territory. There can be structural, fabrication or performance reasons for certain types of smoothness, but of course the aesthetic reasons are also often important, and I think there are some interesting discussions to be had here about the aesthetics of smoothness.
Anyway, that's enough rambling from me, hopefully something there triggers some discussion - I'm really keen to hear about how all of you envision these tools might be used and developed.
…
and I added atomic radii from Wikipedia.
The new Cocoon marching cubes plug-in along with Kangaroo MeshMachine to refine the mesh better than the native tweaky Cocoon refine component are included.
The smaller example takes about 15 seconds. The huge one a minute or two.
Just enter the PDB symbol, and you can browse for those here:
http://pdb101.rcsb.org/motm/motm-by-title
The small one above is a DNA repair enzyme wrapped around DNA:
http://www.rcsb.org/pdb/explore.do?structureId=3UGM
Some are just too big to test and will likely blow up Cocoon or at least MeshMachine.
I thought these structures might be useful to 3D printer enthusiasts looking for fun blobby shapes to build with.
…
Added by Nik Willmore at 10:17pm on February 23, 2016
g-in, brief theory of complex systems, introduction to multi-agent systems and non-linear design, flocking, Boid library, basic examples - brownian motion, adhesion, separation, alignment, geometry following.-----------------------TIME: first session10am – GMT, London11am – Paris, Brussels, Rome, Vienna, Budapest, Bratislava, Warsaw9pm - Sidney7pm – Tokyo6pm – Beijing, Shanghai, Shenzhen, Hong Kong, Taipei3:30pm – Mumbai3pm – Karachi2pm - Samara1pm – Baghdad, Moscow, St Petersburg12pm – Istanbul, Athens, Helsinki, Cairo, JohannesburgTIME: second session3pm – GMT, London4pm – Paris, Brussels, Rome, Vienna, Budapest, Bratislava, Warsaw7pm – Dubai, Abu Dhabi, Baku6:30pm – Tehran6pm – Baghdad, Moscow, St Petersburg5pm – Istanbul, Athens, Helsinki, Cairo, Johannesburg1pm – Rio de Janeiro, São Paulo, Montevideo12pm – Buenos Aires, Santiago10am – Toronto, New York City, Bogota, Lima9am – Mexico City7am – Los AngelesWEBINARSThe rese arch Grasshopper® sessions are unique for their thorough explanation of all the features, which creates a sound foundation for your further individual development or direct use in the practice. The webinars are divided into four groups: Essential, Advanced, Iterative and Architectural. If you are a Rhinoceros 3D or Grasshopper® newcomer, you are advised to take all the Essential sessions before proceeding to the next level. If none of the proposed topics suit your needs or if you require special treatment, you can request a custom-tailored 1on1 session. All sessions are held entirely in English.The webinars are series of on-line live courses for people all over the world. The tutor broadcasts the screen of his computer along with his voice to the connected spectators who can ask questions and comment in real time. This makes webinars similar to live workshops and superior to tutorials.…
Added by Jan Pernecky at 3:36pm on February 17, 2015
ally to describe a process of repeating objects in a self-similar way. Simply stated, the definition of a recursive function includes the function itself. Fractals are among the canonical examples of recursion in mathematics and programming. A loop can simply be a way to apply the same operation to a list of elements, but it is an iterative loop if the results from one step are used in the calculation of the next step. In design research controlling recursion becomes a new strategy to define new forms and spaces.
BRIEF
In this workshop we will be exploring iterative strategies through parametric design. Main tool for the course will be grasshopper3d and its add-on Anemone. Anemone is a simple but effective plug-in for Grasshopper that enables for loops in a simple and linear way. We will explore several strategies such iterative growth, L systems, fractals, recursive subdivisions and more. Our course will focus on how those methods can affect three-dimensional geometries, generating unexpected conformations.
TOPICS
intro to rhinointro to grasshopperadvanced grasshopperdata managementintro to loopscellular automatal-systemsagent based modelling
SCHEDULE
Day 1 / friday 16:00Tour Green Fab LabBasics of 3D modeling in RhinocerosBasics of GrasshopperOpen Lecture by Jan Pernecky, founder of rese arch
Day 2 / saturday 10 am- 18 pmRecursive iterative methodsAdvanced Topics of looping
Day 3 / sunday 10 am – 18 pmRecursive iterative methodsFinal presentation session
REQUIREMENTS
The workshop is open to all participants, no previous knowledge of Rhinoceros and Grasshopper is required (although an introductory knowledge is welcome). Participants should bring their own laptop with a pre-installed software. The software package needed has no additional cost for the participant (Rhino can be downloaded as evaluation version, Grasshopper and plugins are free). These softwares are subject to frequent updates, so a download link to the version used in the workshop will be sent to the participants a few days before the workshop.…
Added by Aldo Sollazzo at 11:10am on October 6, 2015