.0004. [1 of 7] Writing simulation parameters...5. [2 of 6] No context surfaces...6. [3 of 6] Writing geometry...7. [4 of 6] Writing materials and constructions...8. [5 of 7] Writing schedules...9. [6 of 7] Writing loads and ideal air system...10. [7 of 7] Writing outputs...11. ...... idf file is successfully written to : c:\ladybug\unnamed\EnergyPlus\unnamed.idf12. 13. Analysis is running!...14. c:\ladybug\unnamed\EnergyPlus\eplusout.csv15. ......
Done! Read below for errors and warnings:
16. 17. Program Version,EnergyPlus, Version 8.2.7-777c1f8d79, YMD=2015.02.28 16:09,IDD_Version 8.2.718. 19. ** Warning ** IP: Note -- Some missing fields have been filled with defaults. See the audit output file for details.20. 21. ** Warning ** Version: in IDF="'8.2.7'" not the same as expected="8.2"22. 23. ** Warning ** ManageSizing: For a zone sizing run, there must be at least 1 Sizing:Zone input object. SimulationControl Zone Sizing option ignored.24. 25. ** Warning ** ManageSizing: For a plant sizing run, there must be at least 1 Sizing:Plant object input. SimulationControl Plant Sizing option ignored.26. 27. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=F73533B3C6894C67936B_GLZP_1228. 29. ** ~~~ ** Opening Surface creating error=F73533B3C6894C67936B_GLZP_12_GLZ_1230. 31. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=F73533B3C6894C67936B_GLZP_2532. 33. ** ~~~ ** Opening Surface creating error=F73533B3C6894C67936B_GLZP_25_GLZ_2534. 35. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=F73533B3C6894C67936B_GLZP_2836. 37. ** ~~~ ** Opening Surface creating error=F73533B3C6894C67936B_GLZP_28_GLZ_2838. 39. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=4BDFD67E6D0E486796CC_GLZP_940. 41. ** ~~~ ** Opening Surface creating error=4BDFD67E6D0E486796CC_GLZP_9_GLZ_942. 43. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=4BDFD67E6D0E486796CC_GLZP_1044. 45. ** ~~~ ** Opening Surface creating error=4BDFD67E6D0E486796CC_GLZP_10_GLZ_1046. 47. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=4BDFD67E6D0E486796CC_GLZP_1148. 49. ** ~~~ ** Opening Surface creating error=4BDFD67E6D0E486796CC_GLZP_11_GLZ_1150. 51. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=4BDFD67E6D0E486796CC_GLZP_1552. 53. ** ~~~ ** Opening Surface creating error=4BDFD67E6D0E486796CC_GLZP_15_GLZ_1554. 55. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=4BDFD67E6D0E486796CC_GLZP_2456. 57. ** ~~~ ** Opening Surface creating error=4BDFD67E6D0E486796CC_GLZP_24_GLZ_2458. 59. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=4BDFD67E6D0E486796CC_GLZP_2560. 61. ** ~~~ ** Opening Surface creating error=4BDFD67E6D0E486796CC_GLZP_25_GLZ_2562. 63. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=4BDFD67E6D0E486796CC_GLZP_3064. 65. ** ~~~ ** Opening Surface creating error=4BDFD67E6D0E486796CC_GLZP_30_GLZ_3066. 67. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=4BDFD67E6D0E486796CC_GLZP_3268. 69. ** ~~~ ** Opening Surface creating error=4BDFD67E6D0E486796CC_GLZP_32_GLZ_3270. 71. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=4BDFD67E6D0E486796CC_GLZP_3472. 73. ** ~~~ ** Opening Surface creating error=4BDFD67E6D0E486796CC_GLZP_34_GLZ_3474. 75. ** Warning ** GetSurfaceData: Very small surface area[2.94495E-004], Surface=F73533B3C6894C67936B_GLZP_076. 77. ** Warning ** GetSurfaceData: Very small surface area[3.84753E-004], Surface=F73533B3C6894C67936B_GLZP_178. 79. ** Warning ** GetSurfaceData: Very small surface area[9.16905E-004], Surface=F73533B3C6894C67936B_GLZP_380. 81. ** Warning ** GetSurfaceData: Very small surface area[4.96186E-004], Surface=F73533B3C6894C67936B_GLZP_482. 83. ** Warning ** GetSurfaceData: Very small surface area[2.37373E-005], Surface=F73533B3C6894C67936B_GLZP_684. 85. ** Warning ** GetSurfaceData: Very small surface area[6.35824E-004], Surface=F73533B3C6894C67936B_GLZP_786. 87. ** Warning ** GetSurfaceData: Very small surface area[5.86549E-004], Surface=F73533B3C6894C67936B_GLZP_888. 89. ** Warning ** GetSurfaceData: Very small surface area[7.63765E-004], Surface=F73533B3C6894C67936B_GLZP_1090. 91. ** Severe ** GetSurfaceData: Zero or negative surface area[-8.09566E-004], Surface=F73533B3C6894C67936B_GLZP_1292. 93. ** Warning ** GetSurfaceData: Very small surface area[1.51701E-004], Surface=F73533B3C6894C67936B_GLZP_1394. 95. ** Warning ** GetSurfaceData: Very small surface area[9.29917E-004], Surface=F73533B3C6894C67936B_GLZP_1596. 97. ** Warning ** GetSurfaceData: Very small surface area[2.94451E-004], Surface=F73533B3C6894C67936B_GLZP_1698. 99. ** Warning ** GetSurfaceData: Very small surface area[8.03294E-004], Surface=F73533B3C6894C67936B_GLZP_17100. 101. ** Warning ** GetSurfaceData: Very small surface area[6.83026E-004], Surface=F73533B3C6894C67936B_GLZP_18102. 103. ** Warning ** GetSurfaceData: Very small surface area[9.29917E-004], Surface=F73533B3C6894C67936B_GLZP_20104. 105. ** Warning ** GetSurfaceData: Very small surface area[3.19851E-005], Surface=F73533B3C6894C67936B_GLZP_21106. 107. ** Warning ** GetSurfaceData: Very small surface area[7.63765E-004], Surface=F73533B3C6894C67936B_GLZP_23108. 109. ** Severe ** GetSurfaceData: Zero or negative surface area[-4.05899E-004], Surface=F73533B3C6894C67936B_GLZP_25110. 111. ** Warning ** GetSurfaceData: Very small surface area[6.35824E-004], Surface=F73533B3C6894C67936B_GLZP_27112. 113. ** Severe ** GetSurfaceData: Zero or negative surface area[-9.91146E-004], Surface=F73533B3C6894C67936B_GLZP_28114. 115. ** Warning ** GetSurfaceData: Very small surface area[2.70158E-004], Surface=F73533B3C6894C67936B_GLZP_29116. 117. ** Warning ** GetSurfaceData: Very small surface area[3.22781E-004], Surface=F73533B3C6894C67936B_GLZP_30118. 119. ** Warning ** GetSurfaceData: Very small surface area[4.67821E-004], Surface=F73533B3C6894C67936B_GLZP_33120. 121. ** Warning ** GetSurfaceData: Very small surface area[3.22737E-004], Surface=F73533B3C6894C67936B_GLZP_34122. 123. ** Warning ** GetSurfaceData: Very small surface area[2.65634E-004], Surface=4BDFD67E6D0E486796CC_GLZP_0124. 125. ** Warning ** GetSurfaceData: Very small surface area[4.70736E-004], Surface=4BDFD67E6D0E486796CC_GLZP_1126. 127. ** Warning ** GetSurfaceData: Very small surface area[3.42507E-004], Surface=4BDFD67E6D0E486796CC_GLZP_3128. 129. ** Warning ** GetSurfaceData: Very small surface area[5.89276E-004], Surface=4BDFD67E6D0E486796CC_GLZP_4130. 131. ** Warning ** GetSurfaceData: Very small surface area[1.91146E-004], Surface=4BDFD67E6D0E486796CC_GLZP_6132. 133. ** Warning ** GetSurfaceData: Very small surface area[9.71205E-004], Surface=4BDFD67E6D0E486796CC_GLZP_7134. 135. ** Warning ** GetSurfaceData: Very small surface area[4.34494E-004], Surface=4BDFD67E6D0E486796CC_GLZP_8136. 137. ** Severe ** GetSurfaceData: Zero or negative surface area[-3.60159E-004], Surface=4BDFD67E6D0E486796CC_GLZP_9138. 139. ** Severe ** GetSurfaceData: Zero or negative surface area[-1.11946E-004], Surface=4BDFD67E6D0E486796CC_GLZP_10140. 141. ** Severe ** GetSurfaceData: Zero or negative surface area[-3.41257E-004], Surface=4BDFD67E6D0E486796CC_GLZP_11142. 143. ** Severe ** GetSurfaceData: Zero or negative surface area[-8.21483E-005], Surface=4BDFD67E6D0E486796CC_GLZP_15144. 145. ** Warning ** GetSurfaceData: Very small surface area[2.65716E-004], Surface=4BDFD67E6D0E486796CC_GLZP_16146. 147. ** Warning ** GetSurfaceData: Very small surface area[4.84044E-004], Surface=4BDFD67E6D0E486796CC_GLZP_17148. 149. ** Warning ** GetSurfaceData: Very small surface area[7.12297E-004], Surface=4BDFD67E6D0E486796CC_GLZP_19150. 151. ** Warning ** GetSurfaceData: Very small surface area[6.14324E-004], Surface=4BDFD67E6D0E486796CC_GLZP_22152. 153. ** Warning ** GetSurfaceData: Very small surface area[8.88887E-004], Surface=4BDFD67E6D0E486796CC_GLZP_23154. 155. ** Severe ** GetSurfaceData: Zero or negative surface area[-9.89060E-004], Surface=4BDFD67E6D0E486796CC_GLZP_24156. 157. ** Severe ** GetSurfaceData: Zero or negative surface area[-1.14849E-003], Surface=4BDFD67E6D0E486796CC_GLZP_25158. 159. ** Warning ** GetSurfaceData: Very small surface area[4.00479E-004], Surface=4BDFD67E6D0E486796CC_GLZP_27160. 161. ** Warning ** GetSurfaceData: Very small surface area[6.63061E-005], Surface=4BDFD67E6D0E486796CC_GLZP_28162. 163. ** Warning ** GetSurfaceData: Very small surface area[1.09018E-004], Surface=4BDFD67E6D0E486796CC_GLZP_29164. 165. ** Severe ** GetSurfaceData: Zero or negative surface area[-2.49326E-005], Surface=4BDFD67E6D0E486796CC_GLZP_30166. 167. ** Severe ** GetSurfaceData: Zero or negative surface area[-3.17446E-004], Surface=4BDFD67E6D0E486796CC_GLZP_32168. 169. ** Warning ** GetSurfaceData: Very small surface area[8.60686E-004], Surface=4BDFD67E6D0E486796CC_GLZP_33170. 171. ** Severe ** GetSurfaceData: Zero or negative surface area[-2.48515E-005], Surface=4BDFD67E6D0E486796CC_GLZP_34172. 173. ** Fatal ** GetSurfaceData: Errors discovered, program terminates.174. 175. ...Summary of Errors that led to program termination:176. 177. ..... Reference severe error count=24178. 179. ..... Last severe error=GetSurfaceData: Zero or negative surface area[-2.48515E-005], Surface=4BDFD67E6D0E486796CC_GLZP_34180. 181. ************* Warning: Node connection errors not checked - most system input has not been read (see previous warning).182. 183. ************* Fatal error -- final processing. Program exited before simulations began. See previous error messages.184. 185. ************* EnergyPlus Warmup Error Summary. During Warmup: 0 Warning; 0 Severe Errors.186. 187. ************* EnergyPlus Sizing Error Summary. During Sizing: 2 Warning; 0 Severe Errors.188. 189. ************* EnergyPlus Terminated--Fatal Error Detected. 41 Warning; 24 Severe Errors; Elapsed Time=00hr 00min 1.51sec190.…
Albahari) > my favorite
The reference: C# Language specs ECMA-334
The candidates:
C# Fundamentals (Nakov/Kolev & Co)
C# Head First (Stellman/Greene)
C# Language (Jones)
Step 2: read the cookies (computer OFF)
Step 3: re-read the cookies (computer OFF)
...
Step 121: open computer
Step 122: get the 30 steps to heaven (i.e. hell)
Step 123: shut down computer > change planet
May The Force (the Dark Option) be with you.
…
ist.
In other words, I'm looking for the GH equivalent of
Dim x As New List(Of List(Of List(Of Double)))
For example, I might have an outer list of 10 items each containing 20 lists with 30 items inside each 2nd tier list.
Say the outgoing gh_Structure is:
Dim outgoing_Struc as new gh_structure(of gh_number)
I can't seem to figure out how I might use the "append" method to GH_Structure to insert items to specific paths to create a list of a list.
The additional complexity is that I want to customize the indices of the outgoing list. Instead of the outer most list running straight from 0 to 9, I might want to have its indices non-sequential as {0}, {2}, {5}, {11} for example. This helps in using the "Tree Item" component downstream as these specific non-sequential indices refer to something specific upstream.
For example, with custom indices, I can pull a specific sublist by using index {11;3} which may not exists if the indices ran sequentially.
I guess the more general questions is whether anybody has pointers on creating nested trees in a custom component with specific indices? It appears that GH_Path has a "DebuggerDisplay" property which masks the internal continuously running index but this is a read only property.
Any pointers would be helpful
Thanks.…
Added by kermin chok at 1:37am on December 10, 2013
3d.com/group/anemone). changing a gene will start the loop which iterates for 5 times. The loop will output a mesh at each iteration, however the one we want to optimize is the fifth result. So we have a gate that opens when the iteration reaches 5 and passes both the mesh and the objectives to Octopus.
When running Octopus, we are facing the following:
- Neither the labels of the axes nor the results are appearing in the Octopus solution space, although we have the axes names shown in the axes list.
- Though sometimes octopus is running, it is generating solutions more than the set population ( population of 5 individuals and 3 generation is generating more than 30 individuals and all in generation 1 ).
- Even when reseting Octopus doesn't reset. Octopus adds new individuals/phenotypes to the generation instead of starting fresh
- When it crashes the following is shown in the octopus error log (reduction of environmental selection did not yield the correct archive sizeError), ( I have seen the post by Stan regarding the same error message in the log).
I have attached a diagram showing the overall logic and a screen shots ( which I hope they are clear).
…
mensiones extraordinariamente usada tanto en el diseño industrial como en arquitectura. Durante las sesiones de clase el alumno aprende con una metodología orientada a la práctica progresiva, comenzando por aprender las herramientas básicas de Rhinoceros, el manejo de las vistas, el historial, la creación de objetos 2D para más adelante introducirse en el aprendizaje de operaciones más avanzadas como la creación de sólidos, el trabajo con curvas y polilíneas, las operaciones booleanas, las fusiones, el modelado de precisión con Rhinoceros 3D, la manipulación de bloques, los recortes, el trabajo con matrices, etc.
< entrega de DIPLOMA CERTIFICADO en castellano y DIPLOMA CERTIFICADO en inglés al finalizar el curso >
Perfil del alumno al que va dirigido el curso: Profesionales titulados y estudiantes universitarios de las carreras técnicas de: . Arquitectura . Arquitectura Técnica . Ingeniería de Edificación Profesionales que buscan reciclar sus conocimientos de 3D y/o iniciarse en modelado basado en NURBS: . Arquitectos . Aparejadores . Delineantes . Ingenieros . Diseñadores Gráficos, Digital Artists, CG Artists, etc.
REQUISITOS: No se requieren conocimientos previos de CAD ni de modelado 3D (Autocad, Sketchup, 3dsmax, etc.). Al comienzo del Workshop se parte de cero en Rhinoceros.
Del jueves 27 febrero al martes 25 marzo 2014 Martes y Jueves de 16.30 a 20.30h
Lugar de celebración: Centro CIENCIAS (Virgen de Luján - Los Remedios) Calle Virgen de Luján nº32 - 41011 SEVILLE (SPAIN)
Inscripciones y más información: http://www.rendersfactory.es/sevilla/cursos-de-infoarquitectura/3d-workshop-de-modelado/…
io, alle ore 19:30 presso la Mediateca MARTE di Cava de’ Tirreni (Sa), la lecture magistralis dell’arch. Walter Nicolino dal titolo “Augmented visions / Responsive spaces”, un viaggio culturale che, attraversando gli studi progettuali a diverse scale condotti tra la sede torinese e il centro ricerca di Boston, mette in luce una attitudine nell’indagare e nel dar forma alle interazioni tra le persone, gli oggetti e gli spazi, al fine di fornire possibili risposte alle nuove istanze poste dalla rivoluzione digitale.
In apertura i saluti istituzionali del sindaco Marco Galdi, mentre a introdurre la lecture l’arch. Amleto Picerno, promotore del Mediterranean FabLab di Cava de’ Tirreni e tutor della Summer School digitalMed, il laboratorio progettuale che da quattro anni a questa parte, indaga temi, pratiche e tecniche dell’attuale panorama architettonico internazionale. È la smart city al centro della IV edizione di Summer School Digitalmed 2013, che si svolge a Salerno dal 22 al 28 luglio con l’obiettivo di creare un sistema di relazioni e di interazioni continue tra la città, le persone e l’ambiente in cui queste si rapportano in un continuo scambio di informazioni.
Ad esprimere la critic ai prototipi di progetto che emergeranno dal workshop digitalMed, sarà proprio Walter Nicolino, architetto di spicco del panorama italiano, coinvolto in numerosi progetti di ricerca al Senseable City Lab del MIT di Boston, insieme all’arch. Carlo Ratti con cui è fondatore e socio dello studio torinese CARLORATTIASSOCIATI.
Il 26 luglio lo space 1.0 della Mediateca MARTE di Cava de’ Tirreni si fa, dunque, arena d’avanguardia per un interessante dibattito durante il quale, a proposito della Summer School digitalMed, si ragionerà anche sul modo in cui le tecnologie digitali influenzano l’architettura.
«Da qualche tempo a questa parte possiamo scegliere se orientarci alla perfezione tramite navigatori GPS o perderci come sognanti flâneur metropolitani; possiamo associare in un batter d'occhio infiniti layers di dati a un luogo, oppure contemplarne in silenzio il paesaggio; possiamo anticipare la realtà con sofisticate rappresentazioni virtuali, oppure esercitarci in giocose autocostruzioni partecipate.
Possiamo avere l'una e l'altra cosa: non si tratta di una scelta tra il mondo reale e quello virtuale, come predetto da parte della letteratura agli albori dell’era digitale, ma si tratta di capire come il nostro ambiente costruito e gli spazi in cui viviamo stiano imparando a parlare un nuovo linguaggio e ad interagire in modo sempre maggiore con le persone - afferma Walter Nicolino che parafrasando Le Corbusier “La civilisation digitale cherche et trouvera son expression architecturale”, sottolinea l’importanza di integrare le nuove tecnologie e radici locali senza perdere la visione e la dimensione umana della città: All’architettura è richiesta una revisione dei propri strumenti per creare spazi flessibili, inclusivi, in grado di adattarsi ai nuovi modi di vivere e lavorare e di rispondere in modo interattivo alle nostre esigenze».
…
I am not knowledgeable about google maps nor google maps api, but from what I read the two components will definitely show a bit different results due to different topography sources.If it is judging by this 2010 article, your Terrain Generator component offers much higher precisions for USA. Precision goes up to a couple of meters, which is amazing!!On the global scale it offers either SRTM 1 or 3 arc-second data or 30 arc-second GLOBE data. Again this is from the mentioned article, I couldn't find this information by searching the Google Maps website.Terrain Generator 2 component always uses SRTM 1 arc-second data from opentopography.org, and it is limited to 60 degrees north and does not have data for Antarctica. It does not come with satellite image either which is another very convenient feature that you have!I couldn't find information about the allowed radius provided by the Google maps api free account. I limited the "radius_" input to 100 000 meters, even though opentopography.org provides more than that (I successfully downloaded 300 000, but Rhino 5 was not able to create a topography on my PC from such a large amount of data).Even though I couldn't compare the results from two components, by looking at your upper example_LB_terrain_generator.gh definition: set the "I" input of "Surface from points" component to True. In this way the surface will be interpolated through points, which is what we want.
Again thank you for the permission, and I look forward seeing those high precision topography that Google maps offers!!…
have some spare time please fill in my 3D Printing Open Survey - If you could make almost anything, what would it be ? Updated results are publicly available after completing questionnaire (Please press "Wyślij" - Send button and "Wyniki ankiety" - Results button at the end). This survey will be used to evaluate demand for 3d printing services globally. It consist of 30 questions about: - open-source 3d printers - future of additive manufacturing - 3d printing services - ecology in 3d printing - copyright issues and 3d printing Three example questions: 2. Which of the following 3d printing applications is the most interesting? * - Things personalization - Printing food - Attempts to print structures resembles in functioning living tissues or blood vessels - Creating impossible or difficult to create by using conventional technology things - Printing rooms or buildings on earth/moon - Printing chemical compounds (for example drugs) - Using in renewable energy sources - Printing parts and/or mechanical vehicles 3 . Have you ever heard about cheap DIY 3D Printers (for example RepRap, PrintrBot, MakiBox A6) ? * DIY - Do It Yourself - Yes - No 4 . When 3D Printers will become one of the typical household appliances ? * - After 5 years - After 10 years - After 15 years - After 20 years or later - Never - I don't know Feel free to ask questions!…
r-tools/
the hack is found here: http://fancywires.com/?p=499
it doesn't function the same as it used to, and i wonder if somethings have changed in the functions underlying the VB script or maybe some other updates to GH that are relevant.
furthurmore, i ask if anyone has made advancements on labeling techniques for cnc/laser cutting?
is there anything more built into GH to do this task?
Permalink Reply by Giulio Piacentino on Thursday
Yesterday I was asked a modified version of the script. Now it supports planes, so it should be easier to use.
- Giulio
Permalink Reply by gotjosh on Thursday
Delete
cool! I also recently adapted the old version to use an input plane instead of a point... i'll have to look at your script to see if we made the same solution.
thanks for your reply... is there anyway that your script could take care of the hack that fancywires has made afterwards? it would be great to have each letter returned cleaned and joined, so there were exactly the same number of curves in the output as characters in the input...
i am basically clueless with VB and .net scripting so far, but i can code in AS3 and php, so a small push in the right direction might get me far...
How can one return one single curve in a letter like "O"? Do you mean using single-stroke fonts? Or maybe returning a brep (polysurface) as output?
- Giulio
…
the use of digital technologies as architectural design tools. The workshop " Computer Aided Design: parametric design and digital fabrication " aims to do some introductory teaching in the use of some of these tools.
The workshop will focus on the use of computational models of parametric behavior for generating architectural forms. The generative capacity of these models it will be tested in the development of designs defined by repetitive non-standard components, based on the parametric control of its variations and series differentiations. This process will be developed by the use of a three-dimensional modeling software - Rhinoceros, associated with an application for visual programming - Grasshopper.
The last day of the workshop is dedicated to the use of digital manufacturing tools in architecture. Part of the work will take place at the facilities of the Institute of Design of Guimarães (IDEGUI) providing for the use of their laboratories and manufacturing CNC machines (computer numerically controlled).
At the end of the workshop, it is intended the students to understand that the use of digital technologies in architecture can overcome representational functions, and their integration in the design conception, analysis and construction enriches the methodology of project development.
Terms & Participants
The workshop will take place at the School of Architecture of the University of Minho (Campus Azurém, Guimarães) and the Institute of Design of Guimarães (Couros, Guimarães).
The workshop is pointed at students who attend the 3rd year and 4th year from MiArq, EAUM.
The maximum acceptance is 20 students and a minimum of 10 students.
Deadline for entries is April 11 and must be performed by eaum.pac@gmail.com.
Program summary :
Day 23 April 14 -20h
Introduction to 3D modeling in Rhinoceros. Regular geometries, ruled surfaces and NURBS surfaces.
Day 30 April 14 -20h
Parametric design in architecture. Introduction to methods of visual programming.
May 1, 9 -13h 14 -18h
Development of a design idea by the use visual programming processes in Grasshopper.
May 2, 9 -13h 14 -18h
Introduction to methods of digital fabrication. Manufacture physical models of the proposals made.
It is expected that this meeting will take place in the IDEGUI labs.
team:
Bruno Figueiredo ( Lecturer, EAUM )
Paulo Sousa ( PhD candidate , EAUM )
Nuno Cruz ( Invited Lecturer , EAUM )
Cláudia Alvares ( 5th year MiArq student , EAUM )
Javier Bono ( 4th year MiArq student, EAUM )
João Amaro ( 5th year MiArq student, EAUM )…