he Cordyceps. Maybe some of you find this helpful/useful.
So basically, the Cordyceps is a physical module with 4 knobs and 1 slider. The knobs give an output between 1 and 1000, while the physical slider outputs 0-359. And of course, for this physical module I wrote a plugin to communicate with it. The knobs are intended to be the variables that modifies the design, while the physical slider is intended to be connected to the camera component.
Here I will put up "the recipe" for all to make their own module. You will be able to download the plugin as well.
Please send me a message if you want the 3D-files for the knobs, the box and slider knob. They've been made to directly 3D-print.
Plugin:
https://github.com/zakadjeb/Cordyceps/blob/master/Cordyceps/Cordyce...
Code for Arduino IDE:
https://github.com/zakadjeb/Cordyceps/blob/master/Arduino/_Arduino_...
What you need:
1x - Arduino (Leonardo, UNO or whatever)
4x - Potentiometers
1x - Sliding potentiometer
1x - Breadboard
Bundle of jump wires.
1. So, a potentiometer is a variable resistor, which is basically a component that changes the resistance between the voltage and the ground.
If A is supplied with 5V then B must be connected to Ground. The W will give "read" the resistance, and thus should be placed in Analog input (A0-A5) on the Arduino. The slider potentiometer works the same way.
2. Now connect the 4 pots to each their Analog input. The slider is supposed to be in A4. So to make sure:
A0: Knob1
A1: Knob2
A2: Knob3
A3: Knob4
A4: Slider
3. Now it's time to connect the voltage! Using the breadboard, the voltage can be sent through 1 line, the Ground as well. It should be quite easy to connect them.
4. Now, download the Arduino IDE and copy-paste the code I supplied above. In the IDE, you need to let it know which Arduino you're working with, and which port is should send the script.
5. Almost there. Download the plugin. Open the port you're using through the plugin. Set Start to True and the Cordyceps should be within you.
This recipe will be updated!
Let me know if there are any issues.
// Zakaria Djebbara…
he Cordyceps. Maybe some of you find this helpful/useful.
So basically, the Cordyceps is a physical module with 4 knobs and 1 slider. The knobs give an output between 1 and 1000, while the physical slider outputs 0-359. And of course, for this physical module I wrote a plugin to communicate with it. The knobs are intended to be the variables that modifies the design, while the physical slider is intended to be connected to the camera component.
Here I will put up "the recipe" for all to make their own module. You will be able to download the plugin as well.
Please send me a message if you want the 3D-files for the knobs, the box and slider knob. They've been made to directly 3D-print.
Plugin:
https://github.com/zakadjeb/Cordyceps/blob/master/Cordyceps/Cordyce...
Code for Arduino IDE:
https://github.com/zakadjeb/Cordyceps/blob/master/Arduino/_Arduino_...
What you need:
1x - Arduino (Leonardo, UNO or whatever)
4x - Potentiometers
1x - Sliding potentiometer
1x - Breadboard
Bundle of jump wires.
1. So, a potentiometer is a variable resistor, which is basically a component that changes the resistance between the voltage and the ground.
If A is supplied with 5V then B must be connected to Ground. The W will give "read" the resistance, and thus should be placed in Analog input (A0-A5) on the Arduino. The slider potentiometer works the same way.
2. Now connect the 4 pots to each their Analog input. The slider is supposed to be in A4. So to make sure:
A0: Knob1
A1: Knob2
A2: Knob3
A3: Knob4
A4: Slider
3. Now it's time to connect the voltage! Using the breadboard, the voltage can be sent through 1 line, the Ground as well. It should be quite easy to connect them.
4. Now, download the Arduino IDE and copy-paste the code I supplied above. In the IDE, you need to let it know which Arduino you're working with, and which port is should send the script.
5. Almost there. Download the plugin. Open the port you're using through the plugin. Set Start to True and the Cordyceps should be within you.
This recipe will be updated!
Let me know if there are any issues.
// Zakaria Djebbara…
new component "OSM 3D roof"):
2) Simplified 3D roads can be created by using the network of OSM polylines (through new component "OSM 3D road"):
3) 3D forest.Up until now, Gismo supported generating a single 3d tree whenever such tree was present in openstreetmap.org database. Now it is possible to generate 3d trees in forest areas, by randomly positioning the 3d trees (through new component "OSM 3D forest"):
4) Boolean 3d shapes.Gismo's "OSM 3D" component generates shapes as parts: for example, if a building has irregular shapes across its height, they will all be created individually. Trying to merge them with Grasshopper's "Solid Union" component can sometimes fail.New Gismo "Rhino Boolean Union" components tries to overcome this issue by using a much better Rhino version of this command.
5) Library of common GIS color palettes (gradients).A single component containing 22 of the common color palettes used in GIS applications as ArcGIS and QGIS. For example: elevation, aspect, precipitation...
6) Url to location.Thanks to idea by Alex Ng, it is possible to extract location from a link of the following map websites: Openstreetmap, google maps, bing maps, wego.here, waze:
Version 0.0.3 can be downloaded from here:
https://github.com/stgeorges/gismo/zipball/master
Example files from here:
https://github.com/stgeorges/gismo/tree/master/examples
New suggestions, testing and bug reports are welcome!!…
Added by djordje to Gismo at 1:39am on January 29, 2019
s levels of detail by subdividing a 6 sided cube mesh and projecting its vertices according to a referenced height map. This is one of the standard conventions for building full sizes planets. At the lowest level (0) the mesh planet is made of 6 pieces(each 32x32 resolution). The next level down (1) is made of 24 pieces... 6 divided by 4 = 24. Level (2) is 96 quads etc etc. The script will generate each quad at its sub-division level and compare edge vertices to neighboring quads. It will then make sure any shared vertices are in fact at the same projected vector. This ensures a planet quad with edge vertices that match.
The problems comes in texturing each quad.
If I build the quad as a nurb surface from points I can place the texture easily because each surface UV maps squarely to my texture map (which is also square).
If I build the quad as a mesh I cannot just apply the square texture to the mesh UVs. This is because when you unwrap the UVs from a mesh they will not unwrap like a nurb surface's UVs. Therefore to get the correct mapping I would have to manipulate each UV back to an evenly aligned array (which is 1024 points in a 32x32 resolution UV). Maya and blender have 'relax uv' and 'align UV' functions but they don't do the trick and manual corrections are out of the question. So why not skip the mesh method and use the nurb method?
I did this and there is a trade off. The nurb will accept the material texture I want with no other work on my end but when I export the object as an .obj rhino creates its own mesh to describe the nurb(with various unsatisfactory setting options). This works great up to a point because at some level the interpreted mesh will have vertices that do no match at the edges, ie .. creating visible seams in the mesh. The picture below is the nearly seamless planet at LOD(1) made of 24 quads, each with 32x32 vertice resolution and a 512x512 jpg texture running in Unity3d 5. It works but at close level there are seams. This will be resolved simply by having the next LOD(x) instantiate before getting close enough to see the seam but at core nerd level I want the seamless mesh.
So, I can make the seamless mesh but I can not realistically texture map it. I can also make the nurb surface from points and texture it at the expense of the edge vertices matching. I am at the split in the road but I want to have my cake and eat it too. Thoughts, comments, trolls...?
Thanks for reading =)
Footnote: For you pros I am not using seamless noise across the map I am using grasshopper to sew up my otherwise non perfect edges.
Other programs in the pipeline:
-WorldMachine 2
-Wilbur
-Photoshop
-Unity3d…
as the design table? I think this could be 'drawn' and constrained in Inventor in a lot less time. I know the GH model would have a lot of flexibility, but in this case, what can you do with it that wasn't provided by an Inventor model?
Only the 27 lines mentioned were modeled in Rhino, the rest is modeled with GH.
The 5 hrs involved thinking about the approach, defining vertical lines, tilts, elevations, pitch of the roof, intersections.
Once I had decided what my approach would be, and tested the logic with those first lines, points and data path arrangements, it only took one more hour to get to this:
Which is actually quite fast, compared to MCAD workflows.
If you already have components (columns, beams, etc.) modeled and ready to drop into a project, of course it is lightning fast to model simple projects like this example.
I am not as much interested in those situations, because improving efficiency is straightforward and obvious.
I'm more interested in situations where there are no pre-defined families of objects, in which case you need to start from scratch.
The GH model I'm showing is modeled from scratch, except for the 27 lines in Rhino.
Here's one obvious advantage to modeling with GH, once the definition is set-up, it's virtually effortless to change inputs and alter the overall design. Here's an example, lets say we wanted to extend the roof 3 more units, curling away from the original direction.
Plan view before:
And after:
An MCAD app will also allow you to do this, as long as the location of additional elements follows the existing geometric method of definition. What happens if you want completely change the way you locate columns, roof slope, intersection points?
In MCAD, you'll need to re-model the underlying geometry, which will take the same effort as the first round. In GH, this process is not only much faster, it's open to algorithmic approaches, galapagos, etc. and it just takes some simple re-wiring to have all down-stream elements associate themselves to this new geoemtric definition.
For instance, here's the same definition applied to two curves, which are divided in GH, the resulting points are used as a starting point for lines directed at normal from curves.
This is not so easy to do in MCAD.…
Added by Santiago Diaz at 7:55pm on February 24, 2011
ou will see all of the available components on a ribbon at once so there is no need to keep clicking drop down menus.
It's all about discoverability with GH. What if you're a beginner and don't know about the Create Facility (dbl click canvas) how can you find Extr?
Even if you hover over every component or use the drop down lists you will not see the name Extr appear anywhere.
Sure it makes sense that Extr is short for Extrude but it's also the Nick Name of Extrude to Point component
So you can easily miss the fact that one has a Distance Input verses a Point Input.
I think I made the move to Icons around about the move from version 0.5 to 0.6, possibly before. I initially thought that I would go back to text because I loved the mono chromatic look of the text but I soon realised that Icons were the way forward. The greatest benefit is speed. You don't need to digest and decipher every component (which is written 90 degrees to the norm).
I'm not saying you should move to Icons forthwith but at least consider that once you have a better knowledge and understanding of GH, Icons will set you free.
My top ten tips that I would highly recommend to anyone wanting to better themselves with GH.
1) Turn on Draw Icons
2) Turn on Draw Fancy Wires
3) Turn on Obscure Components
4) Use the Create Facility like a Command Line eg "Slider=-1<0.75<2" or "Shiftlist=-1"
5) Use Component Aliases to customise your use of the Create Facility eg giving the Point XYZ component an alias of XYZ will bring it up as the first option on the Create Facility as opposed to the other possibilities.
6) Try to answer other people's questions even if it's not relevant to your own area. By looking into solving a problem outside of your comfort zone and then posting your results it is very rewarding but it also lets you see the other approaches that get posted in a new light.
7) Take the time to understand Data/Path structures.
8) Buy a second monitor - There is nothing that can compare to real estate when working in Grasshopper.
9) Read Rajaa Issa's Essential Mathematics
10) Pick a panel in a tab on the ribbon and get to know every component inside and out and then move on. Start with the Sets Tab > List Panel…
http://www.pilkington.com/) dominates the planar market. Charges "around" 1K Euros per m2 for a "plain" system. Personally in bespoke projects I design my own stuff but due to economies of scale ... they cost a bit more (but they look far more sexier, he he) . On the other hand only in a bespoke project I could dare to suggest such a solution (for a large scale building we are talking lots and lots of dollars).
3. Several scales below (aesthetics) you can find static alu systems (either structural or semi-structural):
Or hinged systems (either structural or semi-structural) capable to adapt in contemporary double curvature facades/roofs/envelopes/cats/dogs etc etc ... pioneered worldwide many years ago by my best friend Stefanos Tampakakis (everybody in UAE knows that genius man: http://www.alustet.gr/company.html):
4. With the exception of some paranoid things that Guru Stefanos does for Zaha these days we are talking about planar "facets" (obviously a triangle is such a planar facet). The current trend is: the more edges the better (humans excel in vanity matters). But achieving planarity in, say, quads (like yours) it adds another "restriction" on what you are doing. Until recently Evolute Tools Pro was the only answer. But right now ... well let's say that in short time you'll be greatly surprised by some WOW things in this Noble Forum, he he.
5. MERO (and obviously custom systems) can adapt (at almost no extra charge) in anything imaginable. But in a bespoke building ... well.. you know ultra rich people: they don't want MERO anymore since "everybody" does MERO solutions. Vanity, what else?
6. Smart Glass would become a must in the years to come: Eco-Architecture MUST dominate everything you do. On the other hand spending millions to do some extra WOW stuff (Vanity) ... it doesn't look to me very Eco-Friendly/Whatever ... but let's pretend so, he he.
7. I'm Architect but a bit different from the norm: for instance I smoke cigars (highly politically incorrect stuff) I always talk openly (ditto) and I ride lethal bikes (ditto).
may the Force (as always the Dark Option) be with you: go out there and kill them all.
best, Peter
…
nted" in space (at instance definition creation phase): indicates the obvious fact that if garbage in > garbage out (try it).
2. Load the GH thing. Task for you: Using Named Views locate the points of interest as described further and make a suitable view. That way you can navigate rather easily around (hope dies last).
3. Your attractors are controlled from here:
The slider in blue picks some attractor to play with. You can use this while the K2 is running.
4. Don't change anything here (think of it as a black box: who cares how it works? nobody actually):
5. Enable the other "black box": job done your real-life stuff is placed:
6. Enable the solver: your "real-life" things start to bounce around:
7. Go there are play with the slider. A different attractor yields an other solution:
8. With real-life things in place if you disable the C# ... they are instantly deleted and you are back in lines/points and the likes:
9. Either with instance definitions or Lines/points change ... er ... hmm ... these "simple" parameters and discover the truth out there:
10. Since these are a "few" and they affect the simulation with a variety of ways ... we need a "self calibrating" system: some mini big Brother that does the job for us. Kinda like applying safely the brakes when it rains (I hate ABS mind).
NOTE: the rod with springs requires some additional code ,more (that deals with NESTED instance definitions) in order to (b) bounce as a whole and at the same time (b) elongates or shrinks a bit.
More soon.
…
lC_UtilEigenSystemSym (level 1) { Exception has been thrown by the target of an invocation. TargetInvocationException }
Object: MillC_UtilEigenSystemSym (level 2) { Could not load file or assembly 'Sawapansolversnet, Version=1.0.4490.29339, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified. FileNotFoundException }
Object: MillC_Topostruct2D (level 1) { Exception has been thrown by the target of an invocation. TargetInvocationException }
Object: MillC_Topostruct2D (level 2) { Could not load file or assembly 'Sawapansolversnet, Version=1.0.4490.29339, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified. FileNotFoundException }
Object: MillC_Topostruct3D (level 1) { Exception has been thrown by the target of an invocation. TargetInvocationException }
Object: MillC_Topostruct3D (level 2) { Could not load file or assembly 'Sawapansolversnet, Version=1.0.4490.29339, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified. FileNotFoundException }
Object: MillC_FEASystem (level 1) { Exception has been thrown by the target of an invocation. TargetInvocationException }
Object: MillC_FEASystem (level 2) { Could not load file or assembly 'Sawapansolversnet, Version=1.0.4490.29339, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified. FileNotFoundException }
Object: MillC_UtilFFT1D (level 1) { Exception has been thrown by the target of an invocation. TargetInvocationException }
Object: MillC_UtilFFT1D (level 2) { Could not load file or assembly 'Sawapansolversnet, Version=1.0.4490.29339, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified. FileNotFoundException }
Object: MillC_UtilFFT2D (level 1) { Exception has been thrown by the target of an invocation. TargetInvocationException }
Object: MillC_UtilFFT2D (level 2) { Could not load file or assembly 'Sawapansolversnet, Version=1.0.4490.29339, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified. FileNotFoundException }
EDIT: Even with COFF disabled in GrasshopperDeveloperSettings this still happens (Thanks Jon)
Is millipede not compatible with Rhino version 5? Or is there a different .dll to use?
Having loaded some of the components:
I congratulate you on following Rutten's 3rd law of Grasshopper :)
Although I hope the Solver and especially the Stress lines get further refinement in order to differentiate them as I find it hard to read the small label at the bottom. Maybe the Chimney's can have different numbers 3 = 3D, 2 = 2D etc.
…
h tubes are redundant so surfaces overlap instead of interpenetrate, so it is not a good system.
Cocoon is the best answer these days unless you can get Exowire/Exoskelton to work. If you want more control over shape, feed your uncapped tubes into Cocoon as meta-surfaces and delete any and all of the inner meshes to just keep the outer single closed one, but this is just duplicate-culled lines used as meta-lines:
Turn down the CS input to 0.005 for this result, from 0.02 used for faster preview. In fact bake the lines and only test Cocoon on a few of them in order to get the result you want before doing the whole thing.
Whole thing at 0.005 cell size takes 5 minutes for Cocoon and 2 minutes for refinement to a smooth and even mesh.
Actually, seems like 0.005 is way too fine, giving a 600MB STL file.
So, 0.01 cell size at less than a minute total:
159MB STL which is still a bit too big for places like Shapeways. Wow. OK then 0.02 cell size, but I have to increase diameter or my two smoothing steps in refine collapse things too much, an in fact I set it to no smoothing, getting more volume and a reasonable 46MB STL file:
Alas, now it's more frail and overly organic rather than mechanical. Increasing diameter just merges it into perforated plates too much. File size is simply an issue with this complexity level, so different 3D printing services will have different file size limits.
Exowire/Exoskeleton would work but your original mesh hasn't been MeshMachine remeshed to be regular, so short segments ruin it. Here is just a corner:
I think that's why more wires fails, at least. Pretty temperamental component.
Switching to MeshMachine is needed, I guess, instead of Cocoon refine, to remesh away so many small triangles along the boring tubes. Crucial for good remeshing was to set Flip to 0 or I failed to get a rough enough mesh.
It's an adaptive mesh so I can retain good detail while roughing out the tubes.
MeshMachine is terribly slow for this whole thing, like 6 minutes, and blows up for this overly rough setting, 20 steps, so less rough, ugh, I'm out of time. I think free Autocad Meshmixer is the way to make a better smaller mesh, after a refined output from Cocoon. MeshMachine is just too slow to tweak and when it blows up, creating massive triangles jutting out, it hangs too when you change settings.
Starting with a Cocoon refined mesh certainly helped Meshmixer. Using triangle budget lets me have full control. Here is 150K triangles instead of 200K:
STL file size down to 40MB. I think Shapeways is 70 or 100MB limit? So it can be even finer. Here is the Cocoon output versus the Meshmixer reduction:
To use Meshmixer, turn on View > Show Wireframe, Command-S to select all and use Edit > Reduce from the palette that appears.
Cocoon can end up making a few inner meshes where things get weird in your uneven original mesh with small holes so fish out the main mesh by adding a List Item node.
The best strategy for Cocoon is indeed to make an overly fine STL so you avoid any need to tweak forever in Grasshopper, but then you can achieve a smaller mesh file size while preserving shape instead of things turning all smearly organic in Grasshopper.…