he Cordyceps. Maybe some of you find this helpful/useful.
So basically, the Cordyceps is a physical module with 4 knobs and 1 slider. The knobs give an output between 1 and 1000, while the physical slider outputs 0-359. And of course, for this physical module I wrote a plugin to communicate with it. The knobs are intended to be the variables that modifies the design, while the physical slider is intended to be connected to the camera component.
Here I will put up "the recipe" for all to make their own module. You will be able to download the plugin as well.
Please send me a message if you want the 3D-files for the knobs, the box and slider knob. They've been made to directly 3D-print.
Plugin:
https://github.com/zakadjeb/Cordyceps/blob/master/Cordyceps/Cordyce...
Code for Arduino IDE:
https://github.com/zakadjeb/Cordyceps/blob/master/Arduino/_Arduino_...
What you need:
1x - Arduino (Leonardo, UNO or whatever)
4x - Potentiometers
1x - Sliding potentiometer
1x - Breadboard
Bundle of jump wires.
1. So, a potentiometer is a variable resistor, which is basically a component that changes the resistance between the voltage and the ground.
If A is supplied with 5V then B must be connected to Ground. The W will give "read" the resistance, and thus should be placed in Analog input (A0-A5) on the Arduino. The slider potentiometer works the same way.
2. Now connect the 4 pots to each their Analog input. The slider is supposed to be in A4. So to make sure:
A0: Knob1
A1: Knob2
A2: Knob3
A3: Knob4
A4: Slider
3. Now it's time to connect the voltage! Using the breadboard, the voltage can be sent through 1 line, the Ground as well. It should be quite easy to connect them.
4. Now, download the Arduino IDE and copy-paste the code I supplied above. In the IDE, you need to let it know which Arduino you're working with, and which port is should send the script.
5. Almost there. Download the plugin. Open the port you're using through the plugin. Set Start to True and the Cordyceps should be within you.
This recipe will be updated!
Let me know if there are any issues.
// Zakaria Djebbara…
he Cordyceps. Maybe some of you find this helpful/useful.
So basically, the Cordyceps is a physical module with 4 knobs and 1 slider. The knobs give an output between 1 and 1000, while the physical slider outputs 0-359. And of course, for this physical module I wrote a plugin to communicate with it. The knobs are intended to be the variables that modifies the design, while the physical slider is intended to be connected to the camera component.
Here I will put up "the recipe" for all to make their own module. You will be able to download the plugin as well.
Please send me a message if you want the 3D-files for the knobs, the box and slider knob. They've been made to directly 3D-print.
Plugin:
https://github.com/zakadjeb/Cordyceps/blob/master/Cordyceps/Cordyce...
Code for Arduino IDE:
https://github.com/zakadjeb/Cordyceps/blob/master/Arduino/_Arduino_...
What you need:
1x - Arduino (Leonardo, UNO or whatever)
4x - Potentiometers
1x - Sliding potentiometer
1x - Breadboard
Bundle of jump wires.
1. So, a potentiometer is a variable resistor, which is basically a component that changes the resistance between the voltage and the ground.
If A is supplied with 5V then B must be connected to Ground. The W will give "read" the resistance, and thus should be placed in Analog input (A0-A5) on the Arduino. The slider potentiometer works the same way.
2. Now connect the 4 pots to each their Analog input. The slider is supposed to be in A4. So to make sure:
A0: Knob1
A1: Knob2
A2: Knob3
A3: Knob4
A4: Slider
3. Now it's time to connect the voltage! Using the breadboard, the voltage can be sent through 1 line, the Ground as well. It should be quite easy to connect them.
4. Now, download the Arduino IDE and copy-paste the code I supplied above. In the IDE, you need to let it know which Arduino you're working with, and which port is should send the script.
5. Almost there. Download the plugin. Open the port you're using through the plugin. Set Start to True and the Cordyceps should be within you.
This recipe will be updated!
Let me know if there are any issues.
// Zakaria Djebbara…
giornata inaugurale sarà dedicata alla free-lecture introduttiva finalizzata alla realizzazione di un modello d'architettura complesso attraverso l'utilizzo di comandi e tecniche avanzate di rappresentazione con Grasshopper (plug-in parametrica di Rhinoceros) e 3dsMax. Sarà illustrato inoltre il potenziale di V-ray per 3dsMax realizzando un rendering concettuale. Durante il mini-corso dell' openDAY verranno mostrate le caratteristiche e le potenzialità degli strumenti per far luce sui nuovi valori assunti dalla modellazione 3D. La modellazione 3D sta interessando un pubblico sempre più vasto inserendosi in una nuova fase di ampia disponibilità per conoscenze, software, hardware di prototipazione e modelli. Pur mantenendo tutti i suoi valori già noti la questione si è talmente ampliata fino ad interessare norme giuridiche (diritti sui modelli ,concorrenza con offerte di servizi apparentemente simili, informazioni deformate e onfusione nei media) Makers University[http://www.makersuniversity.com], in collaborazione con parametricart, vi propone un punto di vista ampio e sintetico su queste tematiche.
Al termine della free-lecture, sarà illustrata l'offerta formativa [CLICCA QUI] di parametricart riferita ai corsi che si terranno nei mesi di Gennaio e Febbraio 2013 inseriti all'interno della più ampia programmazione della Makers University. SONO PREVISTE TARIFFE PROMOZIONALI PER COLORO CHE SI ISCRIVERANNO AI CORSI durante l'OpenDAY.
La lezione e la presentazione si terranno nel nuovo spazio co-working il PEDONE.
PROGRAMMAZIONE
- I temi della Makers University [Leo Sorge];
- Modellazione della parametricTower (concept di architettura complessa) utilizzando Grasshopper, applicativo per la modellazione parametrica [VIDEO] [Michele Calvano];
- Modellazione di una copertura reticolare 3D a completamento della parametricTower con 3dsMax utilizzando tecniche di modellazione mesh complesse [Wissam Wahbeh];
- Rendering con V-ray per 3dsMax illustrando la nuova interfaccia nodale [Wissam Wahbeh].
- Question Time per chiarimenti sugli argomenti illustrati.
COME
L'openDAY sarà aperto a tutti gli interessati,completamente gratuito e sarà replicato in tre sessioni di uguali contenuti organizzate nei seguenti orari:
Sessione [1] 11,30 - 13,30
Sessione [2] 15,30 - 17,30
Sessione [3] 17,30 - 19,30
Per necessità di organizzazione è importante la prenotazione all'evento utilizzando il form in fondo alla pagina specificando nella stringa apposita, il nome dell'evento e la sessione (es. open day sessione 1) oltre agli altri dati richiesti.…
and export the geometry out to VVVV to render it LIVE! RawRRRR. In this case, a digital audio workstation Ableton Live, a leading industrial standard in contemporary music production.
the good news is that VVVV and ableton live lite is both free.
https://www.ableton.com/en/products/live-lite/
i am not trying to use ipad as a controller for grasshoppper. I wanted to work with a timeline (similar to MAYA or Ableton or any other DAW(digital audio workstation)) inside grasshopper in an intuitive way. Currently there is no way of SEQUENCING your definition the way you want to see that i know of.
no more combersome export import workflows... i dont need hyperrealistic renderings most of the time. so much time invested in googling the right way to import, export ... mesh settings...this workflow works for some, for some not ...that workflow works if ... and still you cannot render it live nor change sequence of instruction WHILE THE VIDEO is played. and I think no one wants to present rhinoceros viewport. BUT vvvv veiwport is different. it is used for VJing and many custom audio visual installation for events, done professionally. you can see an example of how sound and visuals come together from this post, using only VVVV and ableton. http://vvvv.org/documentation/meso-amstel-pulse
I propose a NEW method. make a definition, wire it to ableton, draw in some midi notes, and see it thru VVVV LIVE while you sequence the animation the WAY YOU WANT TO BE SEEN DURING YOUR PRESENTATION FROM THE BEGINNING, make a whole set of sequences in ableton, go back change some notes in ableton and the whole sequence will change RIGHT INFRONT of you. yes, you can just add some sound anywhere in the process. or take the sound waves (sqaure, saw, whateve) or take the audio and influence geometric parameters using custom patches via vvvv. I cannot even begin to tell you how sophisticated digital audio sound design technology got last ten year.. this is just one example which isn't even that advanced in todays standard in sound design ( and the famous producers would say its not about the tools at all.) http://www.youtube.com/watch?v=Iwz32bEgV8o
I just want to point out that grasshopper shares the same interface with VVVV (1998) and maxforlive, a plug in inside ableton. audio mulch is yet another one that shares this interface of plugging components to each other and allows users to create their own sound instruments. vvvv is built based on vb, i believe.
so current wish list is ...
1) grasshopper recieves a sequence of commands from ableton DONE
thanks to sebastian's OSCglue vvvv patch and this one http://vvvv.org/contribution/vvvv-and-grasshopper-demo-with-ghowl-udp
after this is done, its a matter of trimming and splitting the incoming string.
2) translate numeric oscillation from ableton to change GH values
video below shows what the controll interface of both values (numbers) and the midi notes look like.
https://vimeo.com/19743303
3) midi note in = toggle GH component (this one could be tricky)
for this... i am thinking it would be great if ...it is possible to make "midi learn" function in grasshopper where one can DROP IN A COMPONENT LIKE GALAPAGOS OR TIMER and assign the component to a signal in, in this case a midi note. there are total 128 midi notes (http://www.midimountain.com/midi/midi_note_numbers.html) and this is only for one channel. there are infinite channels in ableton. I usually use 16.
I have already figured out a way to send string into grasshopper from ableton live. but problem is, how for grasshopper to listen, not just take it in, and interpret midi and cc value changes ( usually runs from 0 to 128) and perform certain actions.
Basically what I am trying to achieve is this : some time passes then a parameter is set to change from value 0 to 50, for example. then some time passes again, then another parameter becomes "previewed", then baked. I have seen some examples of hoopsnake but I couldn't tell that you can really control the values in a clear x and y graph where x is time and y is the value. but this woud be considered a basic feature of modulation and automation in music production. NVM, its been DONE by Mr Heumann. https://vimeo.com/39730831
4) send points, lines, surfaces and meshes back out to VVVV
5) render it using VVVV and play with enormous collection of components in VVVV..its been around since 1998 for the sake of awesomeness.
this kind of a digital operation-hardware connection is usually whats done in digital music production solutions. I did look into midi controller - grasshopper work, and I know its been done, but that has obvious limitations of not being precise. and it only takes 0 o 128. I am thinking that midi can be useful for this because then I can program very precise and complex sequence with ease from music production software like ableton live.
This is an ongoing design research for a performative exhibition due in Bochum, Germany, this January. I will post definition if I get somewhere. A good place to start for me is the nesting sliders by Monique . http://www.grasshopper3d.com/forum/topics/nesting-sliders
…
as one element.
Thank you
Comment by karamba on October 7, 2014 at 11:27pm
Hello Patricio, divide the beams in such a way that each boundary vertex of the shell becomes an endpoint of a beam segment.
Best, Clemens
Comment by Llordella Patricio on October 8, 2014 at 8:30amDelete Comment
Hi Clemens,
I did what you suggested but now assemble element doesn´t work properly. Could you please tell me how to fix it? Thanks in advance, Patricio
8-10-14losa%20cadena.gh
Comment by karamba on October 8, 2014 at 11:59am
Hi Patricio, if you flatten the 'Elem'-input at the 'Assemble'-component the definition works. The triangular shell elements have linear displacement interpolations whereas the beam deflections are exact. In order to get correct results you should refine the shell mesh.
Best, Clemens
Comment by Llordella Patricio on October 9, 2014 at 8:35amDelete Comment
Hello, succeeds in creating the mesh to the slab, and built the beam segment, but when I see the deformations are not expected because the beam is deformed as the slab.
Thanks for the help
PS: maybe I'm using the program for a type of structure that is not the most appropriate, as I saw in the examples of other structures. But this type of structure is that students taught
best regards
Patricio
9-10-14%20Example%201.gh
Comment by karamba on October 9, 2014 at 10:46am
You could use the 'Mesh Edges'-component to retrieve the naked edges and turn them into beams - see attached file:91014Example1_cp.gh
Best regards,
Clemens
Comment by Llordella Patricio on October 15, 2014 at 3:41pmDelete Comment
Dear clemens
I was doing a rough estimate of the deformation, and I can not achieve the same result with Karamba. When I make a rough estimate of the result with Karamba beams and mine are very similar, I think the problem is when I connect the shell, because there are no similar results.
I sent the GH file, and an image of the calculation
The structure is concrete The result I get is 0.58cm
thank youPatricio
15-10-14%20Example.gh
Comment by karamba yesterday
Dear Patricio,
try to increase the number of shell elements. As mentioned in the manual they are linear elements. A mesh that is too coarse leads to a response which is stiffer than the real structure.
Best,
Clemens
…
hopper no requiere de conocimientos de programación o scripting para permitir al diseñador trabajar de forma generativa y paramétrica. No son necesarios conocimientos previos de Grasshopper pero sí de Rhino a nivel básico.
Controlmad es Centro Formador Autorizado Rhinoceros y Rhino fab Studio.
Nuestros profesores son Instructores Autorizados Rhinoceros con experiencia universitaria, nacional e internacional.
El curso y los ejercicios a desarrollar están enfocados a diseñadores, arquitectos, ingenieros y estudiantes.
En este curso introductorio el alumno se familiarizará con términos básicos de la estructura de Grasshopper, como “listas de datos”, “dominios”, “estructuras en árbol”, etc.
Es un curso de 18 horas, con el que se pretende entrar en la lógica de trabajo de Grasshopper mediante diversos ejercicios, de forma que el alumno sea capaz posteriormente de desarrollar sus propias gramáticas, con la confianza que da comprender los términos básicos de programación sobre los que se apoya todo el sistema de trabajo de Grasshopper.Para este curso no son necesarios conocimientos previos de Grasshopper, pero sí de Rhino (a nivel básico).
También se vincula el programa con la impresión 3D aprendiendo a exportar archivos desde Grasshopper con los requisitos mínimos de impresión 3D. Se realizará una demo de impresión en el aula.
El primer día del curso se le facilita al alumno un manual-tutorial con los ejercicios a realizar, en PDF.
A la finalización del curso, y siempre que el alumno haya asistido al 80% de las clases, se le otorgará un diploma oficial acreditativo del curso.
Fechas: 5, 6, 12 y 13 de marzo
Horario: sábado y domingo 16 - 20,30h (Madrid, CET)
Lugar: Sesiones On-line en directo a través de nuestra plataforma online.controlmad.com
…
nts for Ladybug too. They are based on PVWatts v1 online calculator, supporting crystalline silicon fixed tilt photovoltaics.
You can download them from here, or use the Update Ladbybug component instead. If you take the first option, after downloading check if .ghuser files are blocked (right click -> "Properties" and select "Unblock").
You can download the example files from here.
Video tutorials will follow in the coming period.
In the very essence these components help you answer the question: "How much energy can my roof, building facade, solar parking... generate if I would populate them with PV panels"?
They allow definition of different types of losses (snow, age, shading...) which may affect your PV system:
And can find its optimal tilt and orientation:
Or analyse its performance, energy value, consumption, emissions...
By Djordje Spasic and Jason Sensibaugh, with invaluable support of Dr. Frank Vignola, Dr. Jason M. Keith, Paul Gilman, Chris Mackey, Mostapha Sadeghipour Roudsari, Niraj Palsule, Joseph Cunningham and Christopher Weiss.
Thank you for reading, and hope you will enjoy using the components!
EDIT: From march 27 2017, Ladybug Photovoltaics components support thin-film modules as well.
References:
1) System losses:
PVWatts v5 Manual, Dobos, NREL, 2014
2) Sun postion equations by Michalsky (1988):
SAM Photovoltaic Model Technical Reference, Gilman, NREL, 2014
edited by Jason Sensibaugh
3) Angle of incidence for fixed arrays:
PVWatts Version 1 Technical Reference, Dobos, NREL, 2013
4) Plane-of-Array diffuse irradiance by Perez 1990 algorithm:
PVPMC Sandia National Laboratories
SAM Photovoltaic Model Technical Reference, Gilman, NREL, 2014
5) Sandia PV Array Performance Module Cover:
PVWatts Version 1 Technical Reference, Dobos, NREL, 2013
6) Sandia Thermal Model, Module Temperature and Cell Temperature Models:
Photovoltaic Array Performance Model, King, Boys, Kratochvill, Sandia National Laboratories, 2004
7) CEC Module Model: Maximum power voltage and Maximum power current from:
Exact analytical solutions of the parameters of real solar cells using Lambert W-function, Jain, Kapoor, Solar Energy Materials and Solar Cells, V81 2004, P269–277
8) PVFORM version 3.3 adapted Module and Inverter Models:
PVWatts Version 1 Technical Reference, Dobos, NREL, 2013
9) Sunpath diagram shading:
Using sun path charts to estimate the effects of shading on PV arrays, Frank Vignola, University of Oregon, 2004
Instruction manual for the Solar Pathfinder, Solar Pathfinder TM, 2008
10) Tilt and orientation factor:
Application for Purchased Systems Oregon Department of Energy
solmetric.com
11) Photovoltaics performance metrics:
Solar PV system performance assessment guideline, Honda, Lechner, Raju, Tolich, Mokri, San Jose state university, 2012
CACHE Modules on Energy in the Curriculum Solar Energy, Keith, Palsule, Mississippi State University
Inventory of Carbon & Energy (ICE) Version 2.0, Hammond, Jones, SERT University of Bath, 2011
The Energy Return on Energy Investment (EROI) of Photovoltaics: Methodology and Comparisons with Fossil Fuel Life Cycles, Raugei, Fullana-i-Palmer, Fthenakis, Elsevier Vol 45, Jun 2012
12) Calculating albedo: Metenorm 6 Handbook part II: Theory, Meteotest 2007
13) Magnetic declination:
Geomag 0.9.2015, Christopher Weiss…
ssibili e facili da usare. Il corso parte dalle basi della programmazione di arduino fino ad arrivare all’interazione tra un oggetto fisico ed un imput informativo. tutor: Gianpiero Picerno Ceraso
Programma: I giorno Introduzione al Phisical Computing, input digitali e analogici, le basi del linguaggio di programmazione, esempi applicativi; led, pulsanti, fotorestistenze, servo motore, sensore di temperatura, di flessione, sensori di movimento, potenziometri.
II giorno Arduino ethernet, uso di un relè per carichi elevati, accelerometro, introduzione a Processing, interazione di Arduino e Processing, Introduzione a Grassoppher e Firefly e interazione con Arduino.
orario corso: 10:00 – 13:00 e 14:00 – 17:00 (pausa pranzo 13:00 – 14:00) costo: 150€ + IVA deadline: 13 marzo numero minimo di partecipanti: 3
Per iscrizioni scrivi a info@medaarch.com specificando nome, cognome, mail, recapito telefonico e il nome del corso al quali sei interessato. In seguito all’invio del modulo di pre-iscrizione, i partecipanti riceveranno una mail contenente tutte le specifiche di pagamento.
Per seguire il cluster su Arduino è necessario installare il software Arduino 1.0.5 al seguente linkhttp://arduino.cc/en/Main/Software#.Ux3hQj95MYE facendo attenzione a scaricare quello relativo al proprio sistema operativo, Windows 32 o 64 e Mac OS.
Software necessari solo per una parte del corso: Processing 2.1.1 https://processing.org/download/?processing
Rhino 5 http://www.rhino3d.com/it/download Grasshopper for Rhino5http://www.grasshopper3d.com/page/download-1Firefly http://fireflyexperiments.com/
Il cluster rientra in un fitto calendario di attività formative organizzate dalla Medaarch per lanno 2013-2014.…
as the design table? I think this could be 'drawn' and constrained in Inventor in a lot less time. I know the GH model would have a lot of flexibility, but in this case, what can you do with it that wasn't provided by an Inventor model?
Only the 27 lines mentioned were modeled in Rhino, the rest is modeled with GH.
The 5 hrs involved thinking about the approach, defining vertical lines, tilts, elevations, pitch of the roof, intersections.
Once I had decided what my approach would be, and tested the logic with those first lines, points and data path arrangements, it only took one more hour to get to this:
Which is actually quite fast, compared to MCAD workflows.
If you already have components (columns, beams, etc.) modeled and ready to drop into a project, of course it is lightning fast to model simple projects like this example.
I am not as much interested in those situations, because improving efficiency is straightforward and obvious.
I'm more interested in situations where there are no pre-defined families of objects, in which case you need to start from scratch.
The GH model I'm showing is modeled from scratch, except for the 27 lines in Rhino.
Here's one obvious advantage to modeling with GH, once the definition is set-up, it's virtually effortless to change inputs and alter the overall design. Here's an example, lets say we wanted to extend the roof 3 more units, curling away from the original direction.
Plan view before:
And after:
An MCAD app will also allow you to do this, as long as the location of additional elements follows the existing geometric method of definition. What happens if you want completely change the way you locate columns, roof slope, intersection points?
In MCAD, you'll need to re-model the underlying geometry, which will take the same effort as the first round. In GH, this process is not only much faster, it's open to algorithmic approaches, galapagos, etc. and it just takes some simple re-wiring to have all down-stream elements associate themselves to this new geoemtric definition.
For instance, here's the same definition applied to two curves, which are divided in GH, the resulting points are used as a starting point for lines directed at normal from curves.
This is not so easy to do in MCAD.…
Added by Santiago Diaz at 7:55pm on February 24, 2011
occur more than once in the same list, and different elements with identical values can occur more than once. Also, a list may contain lack of elements, referred to as "nulls".
Sets. Strictly speaking a Set is a mathematical construct which adheres to a strict collection of rules and limitations. Basically, a Set is the same as a List, with the exception that it cannot contain the same element more than once, or indeed two or more different elements with the same values. You see, in mathematics there is no difference between a value and an instance of that value, they are the same thing. In programming however it is possible to store the number 7 in more than one spot in the RAM. Grasshopper does not enforce this rule very strongly though, you can use a lot of Set components on lists that have multiple occurrences of the same value. The big difference between Lists and Sets in Grasshopper is that Sets are only defined for simple data types that have trivial equality comparisons. Basically: booleans, integers, numbers, complex numbers, strings, points, vectors, colours and intervals. Lists can contain all kinds of data.
Strings. Strings are text. There's nothing more to it. I don't know why early programmers chose to call them strings, but I suppose it's a better description of the memory representation of them. Strings are essentially sequences of individual characters.
Trees. Trees are the way all data is stored in Grasshopper. Even when you only have a single item, it will still be stored in a tree. A tree is a sorted collection of lists, where each list is identified by a path. A specific path can only occur once in a tree, when you merge two trees together, lists with identical paths are appended to each other. Trees are an attempt to losslessly represent not just the data itself, but also the history of that data. Imagine you have 4 curves {A,B,C,D} and you divide each into 3 points {X,Y,Z}. Then, for each of those points you create a new line segment {X',Y',Z'} and then divide each of those line segments again into 5 points each {K,L,M,N,O}. The way data is stored in trees, it should be possible to figure out whether a point M belongs to X' or to Z', and whether that X' or Z' came from A, B, C or D. This is why paths are often quite long after a while, because they encode a lot of history.
Paths. A Path is nothing more than a list of integers. It's denoted using curly brackets and semi-colons: {A;B;...;Z}. A Path should never be empty {} or have negative integers {0;-1}, but it is certainly possible to create a path like this and it probably won't even crash Grasshopper. Paths are 'grown' by components that (potentially) create more than one output value for a single input value. For example Divide Curve. It creates N points for every single input curve. In cases like this a new integer is appended to the end of the path.
In the next release the Path logic in Grasshopper is somewhat different. I fixed a number of obscure bugs (hopefully without introducing new fresh bugs) and special cased certain operations to somewhat reduce the speed at which paths grow. This may well break files that rely on a specific tree layout, but I hope the temporary sacrifice will be worth the long-term benefits.
--
David Rutten
david@mcneel.com
Poprad, Slovakia…