nts for Ladybug too. They are based on PVWatts v1 online calculator, supporting crystalline silicon fixed tilt photovoltaics.
You can download them from here, or use the Update Ladbybug component instead. If you take the first option, after downloading check if .ghuser files are blocked (right click -> "Properties" and select "Unblock").
You can download the example files from here.
Video tutorials will follow in the coming period.
In the very essence these components help you answer the question: "How much energy can my roof, building facade, solar parking... generate if I would populate them with PV panels"?
They allow definition of different types of losses (snow, age, shading...) which may affect your PV system:
And can find its optimal tilt and orientation:
Or analyse its performance, energy value, consumption, emissions...
By Djordje Spasic and Jason Sensibaugh, with invaluable support of Dr. Frank Vignola, Dr. Jason M. Keith, Paul Gilman, Chris Mackey, Mostapha Sadeghipour Roudsari, Niraj Palsule, Joseph Cunningham and Christopher Weiss.
Thank you for reading, and hope you will enjoy using the components!
EDIT: From march 27 2017, Ladybug Photovoltaics components support thin-film modules as well.
References:
1) System losses:
PVWatts v5 Manual, Dobos, NREL, 2014
2) Sun postion equations by Michalsky (1988):
SAM Photovoltaic Model Technical Reference, Gilman, NREL, 2014
edited by Jason Sensibaugh
3) Angle of incidence for fixed arrays:
PVWatts Version 1 Technical Reference, Dobos, NREL, 2013
4) Plane-of-Array diffuse irradiance by Perez 1990 algorithm:
PVPMC Sandia National Laboratories
SAM Photovoltaic Model Technical Reference, Gilman, NREL, 2014
5) Sandia PV Array Performance Module Cover:
PVWatts Version 1 Technical Reference, Dobos, NREL, 2013
6) Sandia Thermal Model, Module Temperature and Cell Temperature Models:
Photovoltaic Array Performance Model, King, Boys, Kratochvill, Sandia National Laboratories, 2004
7) CEC Module Model: Maximum power voltage and Maximum power current from:
Exact analytical solutions of the parameters of real solar cells using Lambert W-function, Jain, Kapoor, Solar Energy Materials and Solar Cells, V81 2004, P269–277
8) PVFORM version 3.3 adapted Module and Inverter Models:
PVWatts Version 1 Technical Reference, Dobos, NREL, 2013
9) Sunpath diagram shading:
Using sun path charts to estimate the effects of shading on PV arrays, Frank Vignola, University of Oregon, 2004
Instruction manual for the Solar Pathfinder, Solar Pathfinder TM, 2008
10) Tilt and orientation factor:
Application for Purchased Systems Oregon Department of Energy
solmetric.com
11) Photovoltaics performance metrics:
Solar PV system performance assessment guideline, Honda, Lechner, Raju, Tolich, Mokri, San Jose state university, 2012
CACHE Modules on Energy in the Curriculum Solar Energy, Keith, Palsule, Mississippi State University
Inventory of Carbon & Energy (ICE) Version 2.0, Hammond, Jones, SERT University of Bath, 2011
The Energy Return on Energy Investment (EROI) of Photovoltaics: Methodology and Comparisons with Fossil Fuel Life Cycles, Raugei, Fullana-i-Palmer, Fthenakis, Elsevier Vol 45, Jun 2012
12) Calculating albedo: Metenorm 6 Handbook part II: Theory, Meteotest 2007
13) Magnetic declination:
Geomag 0.9.2015, Christopher Weiss…
.
Things have been working swimmingly in many areas of the plugin, but one particular problem has been tough to solve. I have two components that are trying to read/write to the same memory at the same time, causing Rhino exceptions and crashes.
The conflicts appear to be happening between two components -- one is a "Layer Events Listener" that reports essentially what type of layer event just happened. The other is a "Set Layer Visibility" component that toggles the visibility of a list of layers.
The code:
public class LayerTools_LayerEventsListener : GH_Component { /// <summary> /// Initializes a new instance of the LayerTools_LayerListener class. /// </summary> public LayerTools_LayerEventsListener() : base("Layer Events Listener", "Layer Listener", "Get granular information about the layer events happening in the Rhino document.", "Squirrel", "Layer Tools") { }
/// <summary> /// Registers all the input parameters for this component. /// </summary> protected override void RegisterInputParams(GH_Component.GH_InputParamManager pManager) { pManager.AddBooleanParameter("Active", "A", "Set to true to listen to layer events in the Rhino document.", GH_ParamAccess.item, false); pManager.AddTextParameter("Exclusions", "E", "Provide a list of exclusions to stop reading specific events (Added, Deleted, Moved, Renamed, Locked, Visibility, Color, Active).", GH_ParamAccess.list); pManager[1].Optional = true; }
/// <summary> /// Registers all the output parameters for this component. /// </summary> protected override void RegisterOutputParams(GH_Component.GH_OutputParamManager pManager) { pManager.AddBooleanParameter("Initialized", "I", "Whether the listener changed from passive to active.", GH_ParamAccess.item); pManager.AddTextParameter("Document Name", "doc", "Name of the Rhino document that is changing.", GH_ParamAccess.item); pManager.AddTextParameter("Layer Path", "path", "Path of the modifed layer.", GH_ParamAccess.item); pManager.AddIntegerParameter("Layer Index", "ID", "Index of the modified layer.", GH_ParamAccess.item); pManager.AddIntegerParameter("Sort Index", "SID", "Sort index of the modified layer.", GH_ParamAccess.item); pManager.AddTextParameter("Event Type", "T", "Type of the modification.", GH_ParamAccess.item); pManager.AddBooleanParameter("Added", "A", "If the layer has been added.", GH_ParamAccess.item); pManager.AddBooleanParameter("Deleted", "D", "If the layer has been deleted.", GH_ParamAccess.item); pManager.AddBooleanParameter("Moved", "M", "If the layer has been moved.", GH_ParamAccess.item); pManager.AddBooleanParameter("Renamed", "R", "If the layer has been renamed.", GH_ParamAccess.item); pManager.AddBooleanParameter("Locked", "L", "If the layer locked setting has changed.", GH_ParamAccess.item); pManager.AddBooleanParameter("Visibility", "V", "If the layer's visibility has changed.", GH_ParamAccess.item); pManager.AddBooleanParameter("Color", "C", "If the layer's color has changed.", GH_ParamAccess.item); pManager.AddBooleanParameter("Active", "Act", "If the active layer has changed.", GH_ParamAccess.item); }
/// <summary> /// This is the method that actually does the work. /// </summary> /// <param name="DA">The DA object is used to retrieve from inputs and store in outputs.</param> protected override void SolveInstance(IGH_DataAccess DA) { bool active = false; List<string> exclusions = new List<string>();
DA.GetData(0, ref active); DA.GetDataList(1, exclusions);
RhinoDoc thisDoc = null;
bool initialize = false;
string dName = null; string activePath = null; int layerIndex = -1; int sortIndex = -1; string eventType = null; bool added = false; bool deleted = false; bool moved = false; bool renamed = false; bool locked = false; bool visibility = false; bool color = false; bool current = false;
if (active) { thisDoc = RhinoDoc.ActiveDoc;
initialize = (!previouslyActive) ? true : false;
RhinoDoc.LayerTableEvent -= RhinoDoc_LayerTableEvent; RhinoDoc.LayerTableEvent += RhinoDoc_LayerTableEvent; previouslyActive = true;
} else {
RhinoDoc.LayerTableEvent -= RhinoDoc_LayerTableEvent; previouslyActive = false; }
if (ev != null) { dName = ev.Document.Name; layerIndex = ev.LayerIndex; eventType = ev.EventType.ToString();
if (!exclusions.Contains("Active")) { if (ev.EventType.ToString() == "Current") { // active layer has just been changed current = true; }
}
if (!exclusions.Contains("Moved")) { if (ev.EventType.ToString() == "Sorted") { // active layer has just been changed moved = true; }
}
if (!exclusions.Contains("Added")) { if (ev.EventType.ToString() == "Added") { // layer has just been added activePath = ev.NewState.FullPath; added = true; }
}
if (!exclusions.Contains("Active")) { if (ev.EventType.ToString() == "Deleted") { // layer has just been added
deleted = true; } }
if (ev.EventType.ToString() == "Modified") { // layer has been modified activePath = ev.NewState.FullPath;
//skip sortindex eventType = ev.EventType.ToString();
if (ev.OldState != null && ev.NewState != null) { if (!exclusions.Contains("Locked")) { if (ev.OldState.IsLocked != ev.NewState.IsLocked) locked = true;
} if (!exclusions.Contains("Visibility")) { if (ev.OldState.IsVisible != ev.NewState.IsVisible) visibility = true; }
if (!exclusions.Contains("Moved")) { if (ev.OldState.ParentLayerId != ev.NewState.ParentLayerId) moved = true; }
//if (ev.OldState.SortIndex != ev.NewState.SortIndex) moved = true; if (!exclusions.Contains("Renamed")) { if (ev.OldState.Name != ev.NewState.Name) renamed = true; }
if (!exclusions.Contains("Color")) { if (ev.OldState.Color != ev.NewState.Color) color = true; } }
} }
DA.SetData(0, initialize); DA.SetData(1, dName); DA.SetData(2, activePath); DA.SetData(3, layerIndex); DA.SetData(4, sortIndex); DA.SetData(5, eventType); DA.SetData(6, added); DA.SetData(7, deleted); DA.SetData(8, moved); DA.SetData(9, renamed); DA.SetData(10, locked); DA.SetData(11, visibility); DA.SetData(12, color); DA.SetData(13, current);
}
static bool previouslyActive = false; Rhino.DocObjects.Tables.LayerTableEventArgs ev = null;
void RhinoDoc_LayerTableEvent(object sender, Rhino.DocObjects.Tables.LayerTableEventArgs e) { ev = e;this.ExpireSolution(true); }
And for the layer visibility component:
public LayerTools_SetActiveLayer() : base("Set Active Layer", "SetActiveLayer", "Set the active layer in the Rhino document.", "Squirrel", "Layer Tools") { }
/// <summary> /// Registers all the input parameters for this component. /// </summary> protected override void RegisterInputParams(GH_Component.GH_InputParamManager pManager) { pManager.AddBooleanParameter("Active", "A", "Set to true to change the active layer in Rhino.", GH_ParamAccess.item, false); pManager.AddTextParameter("Path", "P", "Full path of the layer to be activated.", GH_ParamAccess.item); }
/// <summary> /// Registers all the output parameters for this component. /// </summary> protected override void RegisterOutputParams(GH_Component.GH_OutputParamManager pManager) { pManager.AddIntegerParameter("Layer ID", "ID", "Index of layer that has been activated.", GH_ParamAccess.item); pManager.AddBooleanParameter("Status", "St", "True when the layer has been activated.", GH_ParamAccess.item); }
/// <summary> /// This is the method that actually does the work. /// </summary> /// <param name="DA">The DA object is used to retrieve from inputs and store in outputs.</param> protected override void SolveInstance(IGH_DataAccess DA) { bool active = false; string path = "";
if (!DA.GetData(0, ref active)) return; if (!DA.GetData(1, ref path)) return;
int layer_index = -1; bool status = false;
if (path != null) {
Rhino.RhinoDoc doc = Rhino.RhinoDoc.ActiveDoc; Rhino.DocObjects.Tables.LayerTable layertable = doc.Layers;
layer_index = layertable.FindByFullPath(path, true);
if (layer_index > 0) { // if exists RhinoDoc.ActiveDoc.Layers.SetCurrentLayerIndex(layer_index, true); status = true; } }
DA.SetData(0, layer_index); DA.SetData(1, status); }
Now originally I was getting exceptions when changing multiple layers' visibility properties, which would cause the Event Listener to fire and try to read the Visibility property before the memory has been released by the Set Layer Visibility component. That led me to add an "Exceptions" input, that would allow me to disable the reading of Visibility events at the source in the Layer Events listener. That helped me manage about 95% of the crashes I was getting, but I still get strange crashes in other event properties, even when that property shouldn't be affected. For instance, I am getting a crash here on the Name property in the event from the delegate function, even though I am only changing Visibility at any one time:
I have a few ideas but they all seem pretty hacky. One is to try to set a flag that is readable by any component in the plugin -- so that the event listener can see if a "set" component is currently running and abort before causing an exception. The other is creating a delay in the event listener, somthing like 200ms, to allow any set components to finish what they are doing before reading the event. Neither seems super ideal.
Any ideas?
Thanks,
Marc
…
utput. A typical parametric analysis involves either toggling input parameters while observing an output response in a cyclic trial and error feedback loop, or by adopting an optimisation approach to search for the 'best' output value based on some target of interest (e.g. in parametric simulation analysis studies).
Either-way, it remains cognitively difficult to keep track of input-output relationships, especially in multi-input parameter scenarios. Furthermore, optimisation outcomes are one-off outcomes that do not provide insight into the underlying input-output causality that is responsible for generating the output in the first place. As a result, it becomes challenging to control the computational workflow intuitively.
Inference Lab is a plug-in that overcomes such challenges by introducing bi-directionality between inputs and outputs, within Grasshopper. In other words, Inference Lab facilitates both forward and inverse computations. An inverse computation implies the ability to set a target output value of interest and instantly reveal the input distributions that are likely to cause the set target. This facilitates an instant cross-section of the input-output mapping. Inference Lab enables interaction with the input and output distributions to explore the cause and effect bi-directionally.
The following demo video illustrates the potential of Inference Lab for a structural design scenario. Given a typical parametric FEA simulation set up, Inference Lab was used to identify 1) how the design parameters influence the maximum deflection and the weight of the cantilever truss structure, and 2) identify the parameter ranges that satisfy specified targets on max deflection and weight.
Under the hood, Inference Lab builds a statistical representation of the input-output workflow from data that is generated automatically from the parametric definition within Grasshopper. The statistical representation takes advantage of a marriage between machine learning and Bayesian inference (a classic technique from probability theory).
More literature about the research underlying Inference Lab can be found here.
Inference Lab is presently composed of four main components: 1) PSlider, 2)POutput, 3)DataGenerator, 4)Model Builder.
Notes:
Inference Lab is a by-product of my very recent PhD work so please forgive me for the lack of information. I intend to update this page with structured tutorials explaining the potential of Inference Lab in various scenarios.
The Inference Lab plug-in is not yet available for download as I am in the process of ironing out a few minor issues. I hope to share an alpha version very soon. …
y (movement, protection, temperature regulation) but also the evolution of cultural expression precisely by exceeding the purely indexical performative relations. Designing not only for the needs but for the desires.
Computational couture looks at the creation of exclusive custom-fitted clothing (typical of haute couture) through the lens of a systemic approach, extending the sartorial techniques with 3D modeling and computation-based approaches developed in Rhinoceros and the visual programming environment Grasshopper.
Aim of the workshop is to exert, infuse and expand the sartorial sensibilities to body proportions and dress making into an algorithmic approach that loops through design and fabrication by means of laser cutting and 3d printing for the design and production of a garment. Participants will be divided in teams focusing on specific aspects of the garment related to the production technique (laser cutting or 3D printing).
////////////////////////////////////
WORKSHOP | calendar
Day 1
Introduction to algorithms and computational design for creative disciplines Basics of 3D modeling in Rhinoceros Basics of Grasshopper Introduction to basic sartorial techniques
Day 2 Testing design options for the dress in Grasshopper (tutored work)
Day 3 Fabrication session . file preparation . parts testing and pre-assembly
Day 4 dress fabrication and assembly
Day 05 finalization of dress final presentation
////////////////////////////////////
WORKSHOP | registration
FEE FOR PARTICIPANTS
Early bird (until 4/5): 250 € Full fee (from 5/5 until 15/5): 350 €
The fee includes materials and fabrication. Plane tickets and accommodation are not included in the fee.
////////////////////////////////////
REGISTRATION (until 15/5/2015)
For registration please write at :
beyond@iaac.net
for more info visit:
http://beyond.iaac.net/?page_id=1620
…
metric/parəˈmɛtrɪk/adjectiverelating to or expressed in terms of a parameter or parameters.art/ɑːt/nounthe expression or application of human creative skill and imagination, typically in a visual form such as painting or sculpture, producing works to be appreciated primarily for their beauty or emotional power.// Summer School 2017 3 day intensive workshop for design students & professionals will delve into computational & parametric methods (using Rhino3D & Grasshopper3D) to create data-driven art installations, physically manifested into a space through hands-on fabrication & assembly.The experimental studio will run across 2 cities in India (New Delhi & Mumbai) and investigate the agenda of ‘filling the void’ at art installation scale, through the use of computation and parametric methods. Studio is designed as a 3-day event in both cities comprising of technical tutorials, teaching sessions, prototyping & presentations culminating in a symposium / round-table conference / open discussion with leading / emerging professionals that demonstrate computation, parametric design or alternative techniques in their work / practice / academia. // Cities & Dates*New Delhi – 30th June to 2nd July 2017 (Friday to Sunday)Mumbai – 7th July to 9th July 2017 (Friday to Sunday)//VENUE: DELHI: Startup Tunnel, Vihara Innovation CampusD-57, 100 Feet Rd, Pocket D, Dr Ambedkar Colony, Chhattarpur, New Delhi - 110074MUMBAI: Raffles Design International, MumbaiHi Life, 2nd Floor, Phirozshah Mehta Road,Santacruz (W). Mumbai – 400054// Registration DatesAll Registrations End 4 days prior to workshop start date (Or till seats last)// About rat[LAB] EDUCATIONrat[LAB] EDUCATION is an initiative by rat[LAB]-Research in Architecture & Technology (www.rat-lab.org) to start a new discourse in architecture & parallel design disciplines with the use of ‘computational design’ & it’s various subsets. Spread across various cities / countries, we are establishing a global dialogue in the domain of computational design by actively organizing and participating in workshops, lectures, presentations & symposia. While rat[LAB] has taken a top-down approach of exploring computational design through industry, a parallel, bottom-up approach is also in-line to involve students of all levels, from design & related backgrounds.…
pproach that will hopefully work. There's still the last part of putting it all together, but I figured I'd post my progress so you could play around with it if you wanted. This is kind of a lucky situation since its only single face breps and simple trims that are being worked with.
I've attached 3 definitions to this post. The first is my reorganization of your original definition, which creates the surfaces from the point grid and culls out any surfaces that are not "on" the surface so that we don't have to deal with them later down the line. This is done through a small VB component which determines whether any of the corner points lie on the surface. If it does it keeps the surface, if not, then it doesn't. The only issue with this is that in your example file, there are some surfaces which the corner points do not lie on the surface, yet the surface that they create spans the underlying surface. At this point I'm not worrying about those. You mentioned that you only want the surfaces that lie at the edge...this can be done by testing whether all 4 corner points lie on the trimmed surface or not.
The second definition is a coded version of the project function. In the example it will project to all the breps supplied, yet in the final version this probably won't be desired. Also, the direction (z axis) is hard code...this could be swapped out if desired.
The third definition is an shot at trimming a surface with an input curve (that curve happens to be projected). I tried this many ways, but found that the function RhinoCutUpSurface seamed to work alright. The other attempts at doing this directly with through functions available for OnBrep were unsuccessful and very complex. Luckily because the underlying brep is an single, untrimmed surface this function works well for us, but in situations where we have a trimmed or multiface brep we'd be up a creek with out a paddle. The function creates an array of breps, but in our case it will create essentially the same surface split by our curve and joined together as a single brep with two (possibly more) faces. All we have to do is find out which face we want to keep and duplicate that into a separate brep and pass it out of the component. In the example file I'm determining which on to keep based off of the distance from a test point to the centroid of each face.
The other option here, which would trump the need for projection or trimming, would be to extrude the edge curves through the surface in question, and use the BrepSplit function which requires two breps. There would still be the need to sort out what to keep, but if this approach were used, all the split pieces would be separate breps.
So, all the pieces are pretty much working separately, all that I have left to do is put them all together in the base definition. The only thing that is really the hump with that is determining exactly which face to keep. My idea at the moment is to find out which corner of the surface does not like on the base surface and use that to determine which face will be thrown out. This might be one of the easier ways, but will not be rock solid. The other option is to pull a test point that's on one of the faces to the base surface and the other face, then use the distance from test point to the point on the base surface and the distance to the pulled point on the other face to the base surface to figure out which one to keep.
As to sectioning off parts of the solution, you could do this in a number of ways, but here's two simple ones. In a scripting component just add a boolean value to the inputs and put the whole script inside of an if statement that looks at that boolean value. With components just add a boolean gate or a null pattern componet anywhere you want in the stream. Again, hook in a boolean toggle value, and that will stop the info from going to components that are downstream.…
this occasion, but it could be converted for DT in no time). Requires some minutes more as regards ... some things, but the usual update is due to some days.
Bad news: it's C#
Good news: User's Manual :
1. That thing (the C#, not me) after sorting (in a "sequential way", so tho speak) the panels (their order was chaotic) allows you to start the massacre by locating a focus of interest (and the user controllable +/- Range derived from it).2. The Range is variable (obviously) and takes care not to exceed the indices of the panel list (OK, that's elementary).
3. If you click the right button (Sadistic Q: where is it? he he) things are deleted and a new constantly self-updating list is your new List. Thus the massacre of panels is totally controllable. An autoZoom thing is also included (free of charge, but it's a bit nerve braking). Zoom factor is variable as well.
4. Then you move over (via the index slider) and start the massacre again. Notice the change of Range.
5. If you turn begin to false (initialization) and then begin to true > start all over again.
6. The other C# thing allows you to increment the index slider in a rather more convenient way. It's a bit weird: it uses delegates (A delegate is an object that knows how to call a method) and events (An event is a construct that exposes just the subset of delegate features required for the broadcaster/subscriber model - but don't ask what this means, he he) in order to talk with your slider (with a defined NickName) and perform the required value control.
NOTE: without realizing it you've just (indirectly) asked one of the most important questions even exposed in this Noble Forum. I hear you : what question? Well ... wait some days for the mother of all threads: "Total control in collections on a per Item basis"
may the Force (the dark option) be with you (and me)
best, Peter…
Rubicon (ii.e. some programming language [I would strongly recommend C#] > the Dark Side > years of pain + tears > hell or heaven?).
Back to that pile or worms of yours (I hate "simple" cases, he he).
0. if you want rounded lips ... Styrofoam is the only solution (+ sanding [buy a mask and some decent cigars ... path is long and hilly]). if not > goto 5/6.
1. by what means you think that you can shape Styrofoam? Do you have access to some CNC foam cutter? Or the only tools that you have are ... 2 hands and a knife? (or a thermal cutter). Accuracy is a BIG issue here: chances are that panels won't "fit". Solution is available in the forthcoming V3.
2. male "protrusions" on Styrofoam is kinda 3rd marriage > AVOID at any cost > this would end up in tears.
3. female ones are safe ... thus we need a proper "insert stripe" that must be compatible with the Styrofoam adhesive and strong enough to hold the pieces until the glue cures (it takes time, there's no instant Styrofoam adhesives around). Maybe aluminum (hard to cut by hand) or balsa (very expensive) or plywood (best option).
4. Some CNC foam cutters they can't shape the female "crevices" > be prepared (a thermal tool may(?) cut the mustard).
Note: panels made with Styrofoam look miserable because reality and theory differ. They also look miserable as well (and kitsch and miserable).
5. making the panels with (marine) plywood ... well this yields far superior accuracy and therefor aesthetics but (a) yields max panel thickness constrains, (b) introduces max panel dimensions constrains (c) yields packing issues [waste material] and (d) requires a totally different "connection" approach: it doesn't make sense to do some female crevice ... unless the plywood is very thick (expensive + heavy).
Note: Designing (pro option) self supporting "rib" reinforced sandwich composite panels ... well this is a bit far and away from what you can handle at present time.
So ... I've suspended the male/female thingy until you decide the final policy: it's the material/detailing that should dictate the method(s) AND the whole design and not the other way.
This is what we call bottom-top design approach (dinosaur Architects follow the top-bottom: disastrous + naive + naive + naive + avoid).
6. Plan ZZTop: make a stand alone autonomous perimeter frame per panel (marine plywood: imagine "thickening" these abstract beams shown inwards per panel) then join these frames by means of bolts (easy) and fill the "gaps" with Styrofoam (hmm). Note: you can reinforce the frames by a variety of means (say: a secondary "beam" sub-structure) achieving a rather elegant all overall solution.
This is the best solution by roughly 666 miles.
…
.
as you can see I devided it into 3 parts.
part1: when I try to connect the new shape to the rest of your definition,the plan z,which gives the panels individually when baked(so I can work them individually)doesn't work,apparently there is something missing when I want to explode it.
that is why I connected it to the definition that I already had(part2)( the only cool part about that one is the attractor point)well it kind works,but not really(if you zoom in you can see that there are some parts overlapped and really not looking good).however I much rather your definition because of the option it gives me to work with individual panels when baked(planz).
however it's around 4 am. and I have decided to make some major changes in design (to prepare some closed and open space,I'm talking about part3 that works with the fibonacci like shape,I know it doesnt look really good,but seriously 4am.!).the major problem is that I tried to make a form like that with kangaroo so the shape would be smoother but I wasnt really able to make it with kangaroo,that's why I made it manually in rhino.I was wondering if you can help me make something like this ( not exacly like this) with kangaroo or (if impossible to be made with kangaroo)even helping me optimizing it so it doesnt look as bad,as you can see when I try to work the grasshopper definition on this shape,it gives me different panel sizes for each surface and all of them are to small compared with the overall size of the so-called pavillion(give it 200-500 sq feet (20-50 sq.m).and any suggestions about the shape would be appreciated,please forgive my basic knowledge of rhino and grasshopper,and let's say I wanted to make a shape like these(don't laugh please!)
u promised not to laugh!!!
please help me find the right way!
…
make-this-form-...
Other than that:
1. Tensegrity is a "static" thingy in the sense that you use some module (let's call it "mode") and repeat. Creating some code that does INVENT new modes for T trusses (Pulitzer/EMMY/Nobel on sight, he he) ... I would strongly suggest to forget that THIS VERY MOMENT.
2. Applying some T "mode" on something (see my examples in the above thread where I use surfaces for the T nodes) is another animal. If you intend to use Kangaroo to "relax" that something (NOT the T itself) well ... you can do it but has nothing to do with T.
3. The Kangaroo def provided is a "way" to test the "rigidity" of the T in use. It's a "post-processing" thing NOT a T solving thing.
4. I have a terrible feeling: are you saying that (a) without knowing a thing (or two) from C#, (b) without knowing K1/K2, (c) with a limited GH experience ... your goal is to write down from scratch a FEA ("Femap") thingy that ALSO does node "relaxation" ? If so ... well ... what about sky diving (without parachute) or that classic Russian roulette "game"?
PS: shown double tetra (classic) and XFrames (classic) T trusses applied in open and closed surfaces.
But of course these are abstract stupid "arrangements" utterly out of question in real-life: read CAREFULLY the discussion in the thread provided above AND also study the 3dPDF attached (with a system out of many available) in order to get the gist about what real-life means (Note: EVEN if no real-parts are used ... the node calculation is different from the abstract "star" connections pictured above - by "star" I mean that cables meet at a single point in space without any "offset" etc etc).
Moral: Seppuku
Plan Z: Skype ASAP
…