ifically, in your picture, it looks like you're feeding two different pieces of data into the same Data input (D0) of the Anemone Loop Start component. If you zoom in on the component in Grasshopper, you'll see that you can add and subtract Data inputs via little +/- symbols, so you can have D0, D1, D2, etc. (Note: when you do this, Anemone Loop End will return an error if it doesn't have the same amount of Data inputs as the Loop Start, so be sure to add them there as well.) Attaching your original data to different inputs keeps them nicely separated during the looped Anemone process.
The nature (and usefulness) of Anemone is that it allows you to take data output by some functions and use it as the input for that same set of functions (normally forbidden under usual Grasshopper logic). So let's say that you want to take a sphere(Sphere0) and stack progressively smaller versions of that sphere on top of it. You feed the sphere into [Loop Start] as D0, and right away, it comes out of the [Loop Start] D0 output exactly the same, because nothing has happened to it yet. You take Sphere0 from the D0 output, let's say scale it by .8, and transform it up appropriately so it sits on top of the last sphere. Now you have Sphere1! Feed Sphere1 into the D0 input of [Loop End], and now (if the # of repeats allows) Sphere1 is the D0 output of [Loop Start]. So if it goes again, it'll scale and transform Sphere1, resulting in a smaller Sphere2, and so on and so forth for as long as you want. If you right-click on the [Loop End] component, you'll see some options labelled "Output after the last" and "Record Data". If neither option is checked, then you'll see the loop calculating in real time, and the only thing that will come out of the D0 output for [Loop End] is the smallest sphere. If you check only "Record Data," then D0 will contain all of the spheres made from the loops. If you check only "Output after the last," then you won't see anything output to D0 until it's entirely finished calculating all the loops. If you check both options, then D0 will output all the spheres, but only after it's finished calculating everything.
In my snake pictured here, there is a constant # of scales placed around each loop of the tube, let's say 10. But since the tube has variable circumferences, the size of the scales needs to vary based on the circumference of their loop. Furthermore, since the size of the scales varies, the distance between each loop must also vary so that there aren't unsightly gaps between loops. So you take the length of Loop0 and divide it by 20 (2 times the # of scales, since you only use every other scale to achieve this pattern), and use that as the distance between Loop0 and Loop1. But since Loop1 has a smaller circumference, Loop1 divided by 20 is going to yield a smaller number than the first one, and that's why you need to use Anemone to make a loop to find all of this out.
This might be more granular than you wanted, but I hope that some of it helps.
…
hit Commit.
I'm wondering how hard it would be to have an edit box which shows the
number the user could click inside of then type in a new number, then
hit enter. :)
2) How would I go about using one line from a table and assign each
field to a variable? Then, move a slider or something and use the values
from the next row?
background: I'm recreating elbows, Tees, and other fittings using
paramatric scripts, then baking and exporting them. Here's one source
table, http://www.wardfittings.com/Assets/PDFs/0902CatalogColorOld.pdf
page 5, the uniform elbows.
Current Setup: the attached ghx file. Create a point at 0,5,0 in a blank
document with units set to inches, then assign that point to the top
left 'Center Pnt' in the ghx file.
Current workflow:
a) Modify variables A, B, H, and Nominal Dia to match one line from the
table in the linked PDF file, page 5, table of regular elbows.
b) Select the 'Nodes' and 'Surfaces' with a drag box
c) Click 'Bake'
d) Switch to Rhino window, do the 'sellast' command.
e) Drag baked objects along Y axis so the center point is at 0,0,0
f) Run 'Join'
g) Run 'Cap'
h) set the 'node' points to a layer called 'nodes'
i) set the surface to a layer called 'fit-3d'.
j) select the surfaces and nodes
k) export selected
This elbow that I'm doing only has 12 rows, so doing it the above method
doesn't take THAT long. I'm also going to be doing a couple with larger
tables like the Tee on page 8, and in other spec files. As you can
imagine, entering in EACH value into a slider is a bit tedious.
I'd love to take the pdf table, run it through an OCR program to convert
to excel, modify the headers so the ghx script knows what they are, then
paste it into grasshopper, or save it and have grasshopper read it, and
I be able to move a slider or something to to select one line at a time.
Has anyone done something similar? ie: assigned one row in a table to a
predefined set of variables, each variable coming from one field in the row?
Thanks for taking the time to read this message. :)
I'm making a rhino script to do steps d-k, so that part will be much faster.
-Suthern…
d, over-the-counter computers, you may still run into serious performance issues. We have no strict recommendation or requirements, but here are the basic rules when it comes to picking hardware for Rhino and Grasshopper:
Memory is key. If you deal with lots of data you need lots of memory to store it in. Since Windows itself (and any other applications that are running) require a lot of memory as well, you should make sure that you have sufficient RAM. Once you run out of RAM, Windows starts to use the hard-disk as virtual memory and when that happens you can say goodbye to performance. If you're running 64-bit Windows and a 64-bit version of Rhino, then there's really no upper limit to the amount of RAM you could install. I recommend getting at least 8GB of high speed RAM, but if you have money for more, go for it.
Graphics cards are important for 3D display, but not much else. Unless you are running software which specifically uses the GPU for computations (a lot of modern Render engines for example) the only purpose of a video-card is to quickly display pixels on the screen. Be sure to get a fairly high-end card from a trusted manufacturer (ATI and NVidia basically). Do not, under any circumstance, settle for an Intel graphics card.
Processors are tricky, so pay attention. It is important that you get as much bang for your buck as possible since computational speed is often a bottleneck. But remember that Grasshopper and (most of) Rhino are single-threaded applications* and therefore do not benefit from multiple cores. Do not be bamboozled by advertised processor speeds as those speeds may be given as a sum-total over all cores. I.e. an 8 core processor that has a total clock-rate of 6GHz will only give you 6/8 = 0.75GHz per core. If all you care about is Rhino and Grasshopper, you'd be better off getting a dual core @ 2GHz or even a single core at 1.8GHz
Some further points to take into account:
Grasshopper GUI is drawn using GDI+ which is not hardware accelerated. Grasshopper framerates are dependent mostly on processor speed.
Grasshopper 3D preview are drawn either in OpenGL or GDI, which are hardware accelerated. A better graphics card will improve performance here.
Grasshopper does not have heavy traffic to and from the disk. HD access speed is rarely a bottleneck.
Grasshopper requires .NET 3.5 while running on Rhino4 and .NET 4.0 or better while running on Rhino5. Be sure your windows supports these.
Rhino and Grasshopper sometimes run on virtual machines such as Parallels and VMWare, sometimes they don't. Even if they do, performance is typically pretty bad. Robert McNeel & Associates do not support these Operating Systems.
* This may change in the future, but not the foreseeable future.…
deform into rhombic dedocahedrons when they reach equilibrium.
http://mathworld.wolfram.com/CubicClosePacking.html
I was trying to model sphere lattice constrained within a boundary box. When inflated, they would not intersect with each other; they would stay in place; and would be malleable just enough to expand and fill in the gaps in between the spheres.
I started off with the help of this thread here(Thanks for those contributed!). As I understood, there was a bug in Kangaroo2. Solver can't handle more than one item plugged in. So I tried to understand David's Stasiuk's Script and adopted it with a few variations, please see gh file attached.
In the first 5 - I've used David Stasiuk's C# component-variable pressure (posted on June 9, 2015 at 12:25am): 'No. 4.5' being the most successful simulation so far(inflation value is kept very low so that they would not intersect);
although I realised I made some math mistake in setting the close packing grid.(could be checked by plugging voronoi3D to see if the area of the rhombic faces are regular)
No. 6-7 I tried with Kangaroo2 components.
After consulting my tutor(Andrei Jipa)'s help, I realised the following changes could be made:
- The definition posted by David on June 8, 2015 at 4:47pm with constant pressure would've worked better.
- Icosahedrons with WbCatmull(Quad divisions) would result in more even load distribution. With wbloop, vertices more concentrated at poles.
- Load in dir Z could be omitted. Andrei has suggested to use lengths(line) in Kangaroo 2 as 'pressure' instead. And I am trying to improve the grid; and maybe try with David's constant pressure definition. I will keep you guys posted of the progress!
I am new to the parametric world, comments/advice very much appreciated! :) Zhini
…
horas.
Los datos al contextualizar la fachada serán:
Vehículos (ISD: input social data)
Personas (ISD: input social data)
Edificaciones contiguas: (UI: urban input)
Sol (Radiación e iluminación): (EFI: energetic flow input)
Creación de energía solar y térmica: (ECI: energetic contribution input)
Objetivos específicos:
Cada asistente generará una fachada contextual a esos 5 inputs.
Entenderá la plataforma de Grasshopper
Comprenderá los conceptos de diseño generativo
Usará los conceptos de programación orientada a objetos (POO)
Generará renders y modelos físicos de la fachada (Fabricación digital)
Costos: $3,250 alumnos $4,180 alumnos de posgrado y profesores $4,830 profesionales
Aulas VI salón 6205, ITESM CEM
Informes: (55)-34449396 mexdf@krfr.org bioarchitecturestudio@gmail.com
Para más información visitanos en:
Fachadas ContextualesWorkshop >Fachadas Contextuales< KRFR|SEEDKRFR|SEED Red Internacional de Investigación OR/gan
http://www.bioarchitecturestudio.wordpress.com
…
tal fabrication tools. DLAB will investigate natural growth processes in relation to innovative concepts of architectural tectonics and fabrication. We will carefully interweave these concepts with interaction and participatory design to create full-scale working prototypes. The programme will be formulated as a two-phase process. During the initial phase participants will benefit from the unique atmosphere and facilities of AA’s London home. The second phase will shift to AA Hooke Park campus and revolve around the fabrication and assembly of a full-scale architectural intervention.
Some of the most prominent features which the participants will be exposed to during DLAB include:
Teaching team: Participants engage in an active learning environment where the large tutor to student ratio (5:1) allows for personalized tutorials and debates.
Facilities: The Digital Prototyping Lab (DPL) in AA London houses cutting-edge facilities for the fabrication of physical outputs through digital fabrication techniques. The facilities at AA Hooke Park allow for the fabrication of one-to-one scale prototypes with a 3-axis CNC router.
Computational skills: The toolset of DLAB includes but is not limited to Rhinoceros, Processing, Arduino, and Grasshopper.
Theoretical understanding: The dissemination of fundamental design techniques and relevant critical thinking methodologies to the participants through theoretical sessions and seminars forms one of the major goals of DLAB.
Professional awareness: Participants ranging from 2nd year students to PhD candidates and full-time professionals experience a highly-focused collaborative educational model which promotes research-based design and making.
Fabrication: According to the specific agenda of each year, a one-to-one scale prototype is fabricated and assembled by design teams.
Lecture series: Taking advantage of its unique location, London, DLAB creates a vibrant atmosphere with its intense lecture programme conveying the diverse expertise of professionals in the areas of digital design and fabrication techniques.
Applications
The deadline for applications is 8 July 2013.
An application can be made by completing the online application form or completing the PDF application form and emailing it to visitingschool@aaschool.ac.uk.
Fees
The AA Visiting School requires a total fee of £1,660 per participant, which includes a £700 deposit and a £60 Visiting Membership.
Fees are non-refundable. Fees do not include flights. Train tickets between London-Hooke Park, accommodation, food in Hooke Park, and materials are included in the fees.
Students need to bring their own laptops, digital equipment and model making tools.…
he last nights, let me try to describe it:-disclaimer: I'm an industrial designer, my coding experience can be compared to your, when you were 4 year old :)-disclaimer 2: I did a picture at the end of the post that maybe explains more than my words
the component has 2 inputs (Start Value, End Value) and one output (Picked Value)
this phantomatic component (which I would refere to as "dynamic value picker") supports any amount of domains on every input -> it works as if they come grafted, from a "longest list" component
The component "at rest" shows only one slider -with question marks on both edges-
For every couple on inputs you connect (1 Start Value connection + 1 End Value connection) it would visually generate a new slider (exactly like a "number slider" component)main difference from the "number slider" component, this one would show the Start Value and End Value numbers at the edges of each thus generated slider
Right click -> edit on it would recall a window similar to the "number slider", with the main difference that only the first part of those options would be present (see attached image for clarity)Whatever slide accuracy you set, it will affect the whole "dinamic value picker" phantom component (if you set "integer numbers" and for any reason one or more inputs are "floating points numbers", the component automatically rounds the inputs to the best "Integer", and allows you only to pick integer numbers in-between)
If you suddenly change a "Start Value" or an "End Value" input, the affected slider/sliders in the component will try to stay as close as possible to the same % value they were before (example if the domain was from 5 to 11, integers only, and you first picked the value 8, the slider was exactly in position 50%: when you change the End Value domain to 21 the slider will set itself to 13 - yes, I picked an easy one lol )
When you first plug a couple of Start Value + End Value, the slider sets itself to Picked Value = Start Value
It could also be possible to supply negative values as Value End and positive values as Value Start: the slider let you pick a number on that domain regardless of the numerical order you use
Last thing, but it's just fancy imagination, if you zoom-in the output (Picked Value) connection dot, a little - and + appears (like in other common components), letting you add a new cursor to every existing slider (it could be possible to customize the color of the new cursor to avoid confusion)
This is the exact description of what I would ask to the lamp genie :)
I attach a pic I just did, in the hope to better explain myself: picture link
and of course thank you again for reading this long poem!
…
ed to do:
FOA_Bundle_Tower.pdf
The tower height is a variable
The degrees of symmetry in plan is variable from 2 to 10 (2 bundles up to 10 bundles; the actual project has 4 bundles made from 8 individual towers or tubes).
The overall radius or diameter of the circle on which each tower is located is a variable
The tower should match the overall topology of the Bundle Tower: each tube should alternate between touching its neighboring tube on the left and right twice.
The number of floors is a variable
Overall tower height: 500m- Floor to floor height: 4.5m (I recommend that you increase this to 10m while testing)- Each tube's plan roughly has an area of 1000m2
this is what i have got so far:
foa tower.ghx
I just need guidance because i am soo lost. thank you
…
e2) Dim plane3 As New Plane(ap, dp, ep)
planeList.Add(plane3) Dim plane4 As New Plane(ap, ep, bp)
planeList.Add(plane4) Dim plane5 As New Plane(fp, cp, bp)
planeList.Add(plane5) Dim plane6 As New Plane(fp, dp, cp)
planeList.Add(plane6) Dim plane7 As New Plane(fp, ep, dp)
planeList.Add(plane7) Dim plane8 As New Plane(fp, bp, ep)
planeList.Add(plane8)
For i As Integer = 0 To planeList.Count - 1 Step 1
Dim transf As New transform()
transf = transform.ChangeBasis(planeList.item(0), planeList.item(i))
Dim newmesh As New mesh
newmesh = oldMesh
newmesh.Transform(transf)
meshList.Add(newmesh)
Next
================================
So why it doesnt want to work ?
I obtain 8 meshes all in the same place as mesh based on plane1
rhino4, grasshopper 0.8.0050
…