the loops haven't even started yet. This is a one time overhead - re-starting the loops after that doesn't have this long delay until you close and re-open the file.
Second, I got some encouraging results rather quickly but then spent WAY TOO MUCH TIME trying to replace the inner loop with a "Fast Loop". These are not well behaved in the sense that they don't respond to <ESC> like the "Classic" loops do so you can't stop them; and I never got the same results as the "Classic", no matter what I tried - but ultimately, I just got too frustrated with "Fast Loop" causing Rhino/GH and my whole laptop to freeze up - VERY BAD!!!!!!!!!!
I re-wired the loops slightly so that the hour used by your 'analysisPeriod' cluster is determined by the 'D0' value inside the inner loop.
I added a "Loop On / Loop Off" switch to stop/start the looping (which was useless with "Fast Loop" - grrr....).
I 'Simplified' the 'D1' output of the inner loop and enabled 'Record data' and 'Output after the last' on the outer loop.
And I got this - four buildings over three hours takes about 20 seconds:
Eleven buildings over three hours takes about one minute.
I'm not sure what will happen when I increase the hours and number of buildings but will try it when I have more time. It might be a good idea to avoid writing to Excel inside the loops and wait for the end results before writing them to an Excel file?
There are more possibilities for re-wiring based on simplifying various outputs but I'm tired of this for now and have other things to do. The exponential slowdown you observed might be due in part to Anemone adding an extra branch path every time it loops; adding 'Simplify' might help this?
P.S. 11 buildings over 13 hours (6am to 6pm) took 5 minutes 38 seconds.…
Added by Joseph Oster at 12:54pm on January 18, 2016
sando las nuevas tecnologías de la información en la arquitectura para la gestión del conocimiento de sistemas que desarrollen estructuras sustentables, desde los procesos de diseño generativos o algorítmicos. Donde se contempla la P.O.O. (programación orientada a objetos) como nuevo lenguaje de expresión para el arquitecto-diseñador en el siglo XXI.Los talleres están pensados para sigan un hilo conductual en el que al mismo tiempo que se enseña se investiga y experimenta. Por primera vez se contará con diversos miembros de SEED como docentes de forma presencial y por video conferencia, logrando de esta forma acercar a los especialistas que se encuentran en Europa a los asistentes de los talleres sin encarecer los costos.+info:http://www.studioseed.net/ adn-methodology/
Los talleres están dirigidos a personas que tengan o quieran conseguir un perfil alto de innovación, creatividad, flexibilidad: profesionales con actividades de dirección, gerencia, proyectistas, investigadores, así como a estudiantes a partir de 5to semestre en adelante. Cada taller abarca perfiles diversos de profesionales, mientras unos están más orientados a directivos y gerencias, otros más a proyectistas.
LOS TALLERES:FAB DIG I / ITESM – CEM / Estado de México / 20 hrs / 8 – 11 al de diciembre 2011 (En este taller no se aplican descuentos ni becas)PARAMETRIC GREEN HOUSING / Colegio de Arquitectos del estado de Jalisco (Por confirmar Sede) / Guadalajara / 20h + 5h proyecto / 30 enero 2012 al 4 de diciembre 2012FAB DIG II / ITESM – CEM / Estado de México / 30h + 5h proyecto / 8 a 12 febrero 2012TERCERA REVOLUCIÓN INDUSTRIAL: TIC`s + SOSTENIBILIDAD. Procesos y paradigmas emergentes / Querétaro / 20 hrs / 15 al 18 de febrero 2012INTRODUCCIÓN AL DISEÑO GENERATIVO / UAM-azc / DF / 8hrs / 13, 14 de enero (Costo representativo $650, máximo 40 personas, mínimo 15 personas)INTRODUCCIÓN A: SCRIPTING CON GRASSHOPPER ( Python) Y PLUGINS / Estudio SEED México / Estado de México / 30 hrs / 23, 24, 25 febrero y 1,2, 3 de marzo 2012…
Added by SEED studio at 3:30am on November 24, 2011
A repository of generic or complex examples.
Example 01: Attractor Values
ND_001_AttractorValues.gh
Example 02: Curve Values
ND_002_CurveValues.gh
Example 03: Point Attractor
ND_003_PointAttract
hange to a rectangle or a sequence of lines to get the tube geometry. Author of the video explained how to do this in the comments, but that didn't help. :(
"Alan Rodriguez Carrillo 1 year ago + Aldo Villanueva Hi, what you can do is try to handle points (4) with the ListITEM component and change the order of relation, for example (0,1) (1,2) (2,3) (3, 4) (4.0) in a panel. Subsequently do the relation of points through a line from points or LineSDL and elaborate the same steps that are explained in this video. Thanks.
Carlos González Puchol 11 months ago + Aldo Villanueva + Alan Rodríguez Carrillo Buenas, Alan and Aldo. I made a closed, tube design. First I listed the 4 points and put them in order with the polyline the polyline, making it closed. Then I had to close them also in the last steps before doing the triangulation."
Can anyone explain how to make this work ? It seems easy. For a person that knows the trick :))
https://www.dropbox.com/s/9dnyfoielum6m1r/PABELLON_last.3dm?dl=0 https://www.dropbox.com/s/y8xdiaf66xbyn9l/PAVILION.gh?dl=0…
o use these extensions in order to integrate numerous tools for analysis and simulation in the architectural process.
This course aims to develop a link between the virtual and the real context model through structural or environmental simulations, using other software or plug-ins dedicated. Through this link the virtual model receives physical properties that can further modify and adapt the initial model. This creates feedback loops that can optimize the design to provide an object responsive to environmental conditions.
Curriculum
Mesh subdivision with Weaverbird, continuous surfaces without NURBS
Genetic optimization with Galapagos, optimal search
Physical environment feedback with Diva and Geco, solar and day lighting analysis
Adding physical properties with Kangaroo Physics, interactive form-finding
Linking the parametric model with structural analysis using Karamba, structural performance simulation
Extracting data with Firefly and Kinect, 3D scanning and human movement tracking
Exchange of information between Grasshopper and other applications with Ghowl links to internet feeds or Excel files.
Schedule:
Module 04 / Grasshopper intermediate & advanced (24 h)
11 Oct – 26 Oct 2013
Fri:
Sat:
16-20
10-14
Language: Romanian
Organized by:
OAR Bucureşti – Romanian Order of Architects, Bucharest Branch
Trainers:
Ionuț Anton, idz arhitectura (ART-Authorised Rhino Trainer)
Daniela Tănase, idz arhitectura (ART-Authorised Rhino Trainer)
https://www.facebook.com/cursurigrasshopperrhinoceros
http://www.oar-bucuresti.ro/anunturi/2013/02/27/d/…
Added by Dana Tanase at 2:49am on September 5, 2013
with various protocols and applications.
One module, led by Luis E. Fraguada will focus on the communication between Processing and Grasshopper utilizing the various protocols available through the gHowl add on for Grasshopper.
The four modules include:
Processing+Grasshopper: Luis E. Fraguada (Barcelona) - http://tinyurl.com/6m49x5e
Processing+OSC: Alba Corral (Barcelona) -
Processing+Shypon: Miguel Espada (Madrid) - http://tinyurl.com/7no8egx
OpenFrameworks+Kinect: Carles Gutierrez (Barcelona) - http://tinyurl.com/79mmsnd
For registration, please email: hola@welovecode.net.
…
Added by Luis Fraguada at 4:11am on February 29, 2012
s the "Surface Populating" definition: I manage to populate my geometry over the surface, but after I bake it, I have to delete the boxes that define my components limits as well! Is there any way of populating and baking only the chosen component, without having to delete the boxes afterwards?
Secondly:
Basically: I am trying to cover a surface with two types of components [ an open one and a closed one] , which will be proliferated over my tubular surface according to the main sunlight direction.
1. I introduce the surface component.
2. I use "Divide Interval2" in order to have division into U and V.
3. i generate the target boxes [ "surfaceBox"] .
4. I use "Isotrim" ( same intervals) and "BRepArea" to find centroid of each area.
5. My "Curve" component introduces sun angle, with its "End Points".
6. I use "Vector 2Pt" to specify sun-light direction.
7. I want to measure the angle between sun-light and the surface normals, at the position of each component; after generating the centre points, I need the normals of each centre point to get the surface's points' UV, and "Evaluate" the srf at points.
8."Angle" and "Vector" components: I use them in order to evaluate the angle between the sun direction and the srf.
9. I convert this angle to degree by using a "Function" [ to see if the angle is bigger from the max.angle or not...]
10. Function "x,y" gives me boolean data.
11. Data become "Dispatch"ed...
12. Two "Morph" components , each one linked to one part of the "Dispatch" data, generate "closed" and "open" components over the srf.
The result should have been different types of components, based on the surface's curvature, diraction and sun-light direction...
I do not understand where the mistake is in this definition...
Thx in advance1
Spyros K.…
r [String Split] in version 0.9.0014)
The [Timer] prompts a component to up date at the set interval. in this case every 1 seconds.
The [Time] param is a placeholder for a time in the same way that a [Number] param can hold real numbers.
By using "Now" as the input to the [Time] param you will get the current time when the param updates. therefore every second it resets to the current time.
The [Text Split] is there to separate the output of [Time] in a string format at every colon ":"
Therefore "Monday, 13-MAY-2013 (11:23:30)" would become:
0 Monday, 13-MAY-2013 (1
1 23
2 30)
The next two components use this to convert it into the current seconds. Because we are after the last item "30)" we can use [List Item] on a reversed list to get the last item.
Now we have to remove the ")" with [Replace String] but we are replacing it with nothing so it disappears.
The Arrow is part of the Sketch Tool Functionality of the canvas.
Lastly the 3 different inputs should go into the three different Inputs of the [Stream Filter]
…
analysis with Honeybee. Here is the tentative outline:
09:00 - 09:30
What is Honeybee, Introduction to daylighting simulation
09:30 - 11:00
Geometry preparation workflows, Radiance materials
11:00 - 11:10
Break
11:10 - 12:30
Sky types, Run your first simulation
12:30 - 13:30
Lunch
13:30 - 15:00
Daylighting analysis types, Result visualization, Getting started with annual daylight
15:00 - 15:15
Break
15:15 - 16:00
Annual daylight analysis and Results interpretation
Check MEBD page for more information including the registration link: http://www.mebd-penndesign.info/Honeybee-MEBD-Workshop-PennDesign
Please feel free to forward this to anyone of interest.
Cheers,
Mostapha
PS: Thank you all for the kind comments and emails for the Ladybug workshop. We recorded the workshop and are in the process of figuring out how to share it with the public. I will send an update once it is uploaded.
…