n to finding a concave contour polyline (which is in general what you need). In your case each contour section contains a series of points of which you do not know the order and you need to sort them so that by connecting them you find the contour. This is fairly easy to do when the contour is convex (basically you find the average point then calculate the vectors from the average to the points and sort the vectors by angle - sorting the points by the same angle gives you the right order for the contour), but generally impossible to find uniquely when the contour is concave (PS: convex means that, for ANY 2 points inside the figure, a straight line connecting them doesn't intersect with the border curve - i.e. circles, ellipses, rectangles, triangles - concave shapes are a star, a crescent moon, an arrow, a boomerang, etc.).
The problem goes like this: given a generic list of points:
Each of these configurations for a perimeter equally fits the above:
Laurent already went for another possible solution, the stochastic approach (by subdividing the connecting lines), I slightly adjusted a few things over his solution:
namely, I added a rounding option to adjust for some weird tolerance issues (some points that should be at Y=80 were at Y=79.99998 or something) and a more straightforward solution to group them by section plane using sets logic. This, coupled with alpha shape, gives a quite good approach, still very coarse in terms of results but that depends on the sampling resolution of the field (i.e. number of height sections in which you calculate the metaballs) and sampling length of the connecting lines.
Definition attached.…
Diffraction , I left it, how it is.
For the unusual issues that comes in the image source component, so, is it something strange? But, I still have the same issues when I sets any integer component (single or multiple) in the “reflection order” of the image source component, in the “image source order” in the ray tracing component, and again, when I connect the output “Direct sound data” of Direct Sound component in the Energy Time Curve.
Do I wrong something with the integer component? I used it already in the first parts, for sets “grasshopper layers”, in the “Scene” component, but here it works. Should I start with a new file?
For the multi-object optimization, thank you for all suggestions. Yes, I red PHD thesis work of Tomas Mendez and the article “ EDT, C80 and G Driven Auditorium design” and still others. Thank you to all these articles, I decided where to focus my thesis.
I understand the potential of Multi-object optimization, and problems that I can finding without using it. Actually, in the beginning of my thesis, I tried to jet in contact with the Politecnico di Torino, but was not easy because I’m not a Politecnico student.
Here, in University of Florence (Building engineering), there isn’t a department or someone that is already familiar with these field of study, so, as you can image, for design my thesis, I can confide on online resources. So far, my Professor suggest me to begin with a Nonlinear Global optimization like Galapagos, and only after see the multi-object. In this way, step by step if something doesn’t work is easier to understand way and where something is going wrong: if are problems due to the setting of the programs, because we are not practical about these, or if there is a wrong in the simulations or in the algorithm and ect.
Do you think is a good way for go on?
Thank you very much,
Kind Regards
Giulia
…
It was originally developed at NBBJ by the Design Computation Leadership Team over the course of about 10 months in 2015-2016.
Primary development by:
Andrew Heumann / andheum / @andrewheumann
Lead Developer
Marc Syp / marcsyp / @mpsyp
Product Manager
Nate Holland / nateholland / @_NateHolland
Contributing Developer
----
Gone are the days of faking a user interface by laying out sliders and text panels and hiding wires on the Grasshopper canvas. Human UI interfaces are entirely separate from the Grasshopper canvas and leverage the power of Windows Presentation Foundation (WPF), a graphical subsystem for rendering user interfaces in the Windows environment.
OLD NEW
In other words: Human UI makes your GH definition feel like a Windows app. Create tabbed views, dynamic sliders, pulldown menus, checkboxes, and even 3D viewports and web browsers that look great and make sense to anyone--including designers and clients with no understanding of Grasshopper.
Download the plugin + sample files:
Food4Rhino
View the project on Bitbucket:
Bitbucket
We look forward to seeing where this project takes you, please share your projects made with Human UI!…
up structural systems in the parametric environment of Grasshopper. Participants will be guided through the basics of analysing and interpreting structural models, to optimisation processes and how to integrate Karamba3D into C# scripts.
This workshop is aimed towards beginner to intermediate users of Karamba3D however advanced users are also encouraged to apply. It is open to both professional and academic users.
Earlybird (until May 10):
Professional EUR 750 (+VAT)
Educational EUR 375 (+VAT)
Course Fee:
Professional EUR 825 (+VAT)
Educational EUR 415 (+VAT)
Course Outline
Introduction & Presentation of project examples
Optimization of cross sections of line based and surface based elements
Geometric Optimization
Topological Optimization
Structural Performance Informed Form Finding
Understanding analysis algorithms embedded in Karamba and visualising results
Complex Workflow processes in Rhino3d, Grasshopper3d and Karamba3d
Places are limited to a maximum of 10 participants with limited educational places. A minimum of 4 places are required for the workshop to take place.
The workshop will be cancelled should this quota not be filled by May 31st.
The workshop will be taught in English. Basic Rhino and Grasshopper knowledge is recommended. No knowledge of Karamba3D is needed.
Participants should bring their own laptops with either Rhino5/Rhino6 and Grasshopper3d installed. A 90 day trial version of Rhino can be downloaded from Rhino3d.
Karamba3D ½ year licenses for non-commercial use will be provided to all participants.
…
e and i get it. If you have time check the attached papers we published a while ago in relation to the contribution of thermal mass in the reduction of temperature in residential buildings. See the nice contribution of the heavy TM or the lower one for light TM.
As for the solarHeatCapacity, your description (of the 50W) is derived on a 1 Facade/Floor ratio and fully glazed. The only way to reduce it is to increase the ratio (bigger facade area). Which is not recommended (energy losses), but this is a different issue. So, roughly, we can say that 50 is the lower value. If i have less glazing area this number will be higher (right?)
I want to define a value list of "architectural situations", so it is easy to explain and understand. One situation can be:
"Ratio facade/floor 1 & Fully glazed" = 50
"Ratio facade/floor 1 & Half glazed" = 75
"Ratio facade/floor 1.5 & Fully glazed" = 30
"Ratio facade/floor 1.5 & Half glazed" = 50
"Ratio facade/floor 0.75 & Fully glazed" = 70
"Ratio facade/floor 0.75 & Half glazed" = 90
Makes sense for you something like this?
I also defined a value list for the timeConstant like this:
Light Building (Mobile home) = 1Medium-light building (Cement tiles on floor) = 4Semi Heavy Building (Concrete floor + Tiles) = 8Heavy Building (Concrete floors/ceilings + Heavy external and internal walls) = 12
As for the first 5-10 cm effective TM in general my assumption is that you take half of the mass to your space and half to the space above/below you. Will be interesting to do a parametric study on just the thermal mass, uninsulated and insulated to see what the depth limits effectivity will be. Interested in doing such a study together? Can be a nice work even for publishing.
Thanks a lot ... again,
-A.…
393&xg_source=activity
In this case we see a geometrically approach, which doesn’t works efficient, because it required knowing how they behaviors together before, and I think it is not the ‘really behaves’.
To make the structure ‘really behaves’ I tried use kangaroo and the result works very well! As you can see I simply give the 2-set reverse UForce, and then they start to rotate until they found their equilibrium. That means 90 degree rotation. I was wondering what we can do to make a endless-rotation. I am mean 360 degree or more like this:
https://www.youtube.com/watch?v=4owFczeqqMQ
By the way, I try to give supports which allow a horizontal movement only (Just curious how we could keep the anchor-movement horizontally and in the same layer, for example like usual supports for compression ring…). I use the AnchorXYZ, but Kangaroo-Engine seems don’t accept its output.
So maybe some one knows a better solution?
…
Added by Jon to Kangaroo at 7:40am on March 11, 2014
problem later) to fit more shapes that are otherwise won't fit in.
On the example below horizontal rectangle couldn't fit in but its rotated analog could and thus was placed in.
Later, when placed shapes are used to generate frames, because of this rotation, the position of the starting points changes and because of the approach I use to generate the frames some angle values are attached to the wrong corners, this brakes the frame shape and looks like this (on the left the frame of sick shape and on the right the frame of the healthy shape):
Again, this happens because the angle values are assigned to the specific corners (points) and previously rotated shapes get these all messed up:
Easy fix, don't rotate the shapes, problem is, I've already baked a good number of them for later use. I'd like to avoid regeneration because it takes a lot of time and without rotation I constrict the algorithm even more.
Better fix, use a different approach, this is where I'd like to hear suggestions and kicks in a right direction. Please take a look at my definition. It works but I have a feeling like giving an amputee a job of sweeping the floor.
…
he picture (4).
Previously, I had a problem with generating intersections between the two directions of the beams, but a colleague helped me by extending beams, so there was no problem with lines of intersection. But this solution has generated curl (5) at the highest vertex geometry, which I ignored in order to repair it before printing, perhaps this mean my problem with my beam spread properly. Only when the beams is 19, does not jump no problem, but I still can not distribute them properly.
(1)
(2)
(3)
(4)
(5)
I tried to show as simply as possible by removing or signing my code in GHX file.
Thank you in advance for your help
…
ceros.
Public concerné /
Architectes et designers, utilisateurs de Rhino souhaitant paramétrer Rhinocéros à l’aide de Grasshopper,
programme associant des composants et une structure de graphe interagissants avec le modèle Rhino.
Une bonne connaissance de Rhinocéros est nécessaire. La langue de la formation est le français.
Structure et Objectif de la formation /
La formation se déroule sur 3 jours : les 2 premières journées sont consacrées aux « fondamentaux » de
Grasshopper avec en préambule une introduction au design et à l’architecture paramétrique et leurs impacts
dans la conception, la création et la construction.
La troisième journée sous forme d’atelier est dédiée à l’étude de cas concrets proposés par les stagiaires, qui,
quelques jours avant la formation, pourront envoyer leurs projets par mail à - info AT rhinoforyou DOT com -
Les stagiaires, après la formation, pourront rester en contact avec les formateurs de HDA par le biais du
blog complexitys.com et le twitter @HDA_Paris. La durée de cette formation permettra d’atteindre une
autonomie et une bonne compréhension basée sur des exemples concrets.
Programme ind icatif des notions traitéES pendan t la formation /
Introduction à la conception Paramétrique . Rhinoscript, Grasshopper: différences et similarités . Interface
graphique de Grasshopper . Objets, Données, Listes . Opérateurs scalaires : La mathématique de
Grasshopper . Gestions des données : la logique de Grasshopper . Vecteurs, Points, Lignes, Surfaces : La
géométrie de Grasshopper . Listes, Arbres, Branches . Le dessin paramétrique: exercices divers et exemples
. Références, Bibliographie, Support de cours . Ateliers d’architecture et design paramétrique (3ème jour) .
Moda lité de la formation /
Venir avec un PC portable équipé de Rhinocéros version 4.0 SR 7 et de la dernière version du plug-in
Grasshopper (téléchargeable sur www.grasshopper3d.com).
Le coût du stage de 3 jours est de 1050 € HT par personne.
Réserver votre place dès que possible car les places sont limitées à 10 participants maximum.
Inscriptions et renseignements: Jacques Hababou, info AT rhinoforyou DOT com
Pour en savoir plus sur l’architecture paramétrique: www.complexitys.com…
t. So here we go!
1. Honeybee is brown and not yellow [stupid!]...
As you probably remember Honeybee logo was initially yellow because of my ignorance about Honeybees. With the help of our Honeybee expert, Michalina, now the color is corrected. I promised her to update everyone about this. Below are photos of her working on the honeybee logo and the results of her study.
If you think I'm exaggerating by calling her a honeybee expert you better watch this video:
Thank you Michalina for the great work! :). I corrected the colors. No yellow anymore. The only yellow arrows represent sun rays and not the honeybee!
2. Yellow or brown, W[here]TH Honeybee is?
I know. It has been a long time after I posted the initial video and it is not fun at all to wait for a long time. Here is the good news. If you are following the Facebook page you probably now that the Daylighting components are almost ready.
Couple of friends from Grasshopper community and RADIANCE community has been helping me with testing/debugging the components. I still think/hope to release the daylighting components at some point in January before Ladybug gets one year old.
There have been multiple changes. I finally feel that the current version of Honeybee is simple enough for non-expert users to start running initial studies and flexible enough for advanced users to run advanced studies. I will post a video soon and walk you through different components.
I think I still need more time to modify the energy simulation components so they are not going to be part of the next release. Unfortunately, there are so many ways to set up and run a wrong energy simulation and I really don’t want to add one new GIGO app to the world of simulation. We already have enough of that. Moreover I’m still not quite happy with the workflow. Please bear with me for few more months and then we can all celebrate!
I recently tested the idea of connecting Grasshopper to OpenStudio by using OpenStudio API successfully. If nothing else, I really want to release the EnergyPlus components so I can concentrate on Grasshopper > OpenStudio development which I personally think is the best approach.
3. What about wind analysis?
I have been asked multiple times that if Ladybug will have a component for wind study. The short answer is YES! I have been working with EFRI-PULSE project during the last year to develop a free and open source web-based CFD simulation platform for outdoor analysis.
We had a very good progress so far and our rockstar Stefan recently presented the results of the work at the American Physical Society’s 66th annual DFD meeting and the results looks pretty convincing in comparison to measured data. Here is an image from the presentation. All the credits go to Stefan Gracik and EFRI-PULSE project.
The project will go live at some point next year and after that I will release the Butterfly which will let you prepare the model for the CFD simulation and send it to EFRI-PULSE project. I haven’t tried to run the simulations locally yet but I’m considering that as a further development. Here is how the component and the logo looks like right now.
4. Teaching resources
It has been almost 11 months from the first public release of Ladybug. I know that I didn't do a good job in providing enough tutorials/teaching materials and I know that I won’t be able to put something comprehensive together soon.
Fortunately, ladybug has been flying in multiple schools during the last year. Several design, engineering and consultant firms are using it and it has been thought in several workshops. As I checked with multiple of you, almost everyone told me that they will be happy to share their teaching materials; hence I started the teaching resources page. Please share your materials on the page. They can be in any format and any language. Thanks in advance!
I hope you enjoyed/are enjoying/will enjoy the longest night of the year. Happy Yalda!
Cheers,
-Mostapha
…