summer because of the relative humidity of outdoor air will be over 80%.
I want to set the schedule like this
1) cooling setpoint to be 27C degree and max humidity to be 50%.
2) when the outdoor air temperature is lower than 27C, open the windows and ventilation naturally.
3) Air conditioning and dehumidification are needed only when the occupancies are at home (almost at night) and Natural ventilation is not to be.
4) Accept the indoor air relative humidity to be almost 100% when dry bulb temperature is lower than 27C.
Now, I set the air conditioning schedule as cooling setpoint schedule, but there are no components to set a dehumidification setpoint schedule.
The dehumidifier keeps working all day whichever the windows are opening or not.
How can I stop the dehumidifier during the windows open?
thank you.…
llowing for higher skyline and construction areas along public transportation corridors. Up until now, neighborhoods once characterized by two-story houses, gardens and ground- floor open shopfront programs, have been completely transformed by the introduction of fortressed monolithic residential and office towers, which lack any sort of urban street life.
The new master-plan, however, now requires buildings to have an open street façade to accommodate multiple programs. Led by tutors from UNStudio (www.unstudio.com), the AA Visiting School São Paulo will address the changes being prescribed by the new masterplan through the redefinition of the tower typology in the extending of the ground of street culture, green landscapes and ecological mediation along the vertical axis of these buildings. For this, the workshop will teach advanced digital design and fabrication techniques to explore a series of novel differentiating structural and environmental organizations in the redefinition of the São Paulo skyscraper.
For more information:
saopaulo.aaschool.ac.uk
Applications:
https://www.aaschool.ac.uk/STUDY/ONLINEAPPLICATION/visitingApplication.php?schoolID=303
For any queries, please email: brazilvisitingschool@aaschool.ac.uk.…
llowing for higher skyline and construction areas along public transportation corridors. Up until now, neighborhoods once characterized by two-story houses, gardens and ground- floor open shopfront programs, have been completely transformed by the introduction of fortressed monolithic residential and office towers, which lack any sort of urban street life.
The new master-plan, however, now requires buildings to have an open street façade to accommodate multiple programs. Led by tutors from UNStudio (www.unstudio.com), the AA Visiting School São Paulo will address the changes being prescribed by the new masterplan through the redefinition of the tower typology in the extending of the ground of street culture, green landscapes and ecological mediation along the vertical axis of these buildings. For this, the workshop will teach advanced digital design and fabrication techniques to explore a series of novel differentiating structural and environmental organizations in the redefinition of the São Paulo skyscraper.
For more information:
saopaulo.aaschool.ac.uk
Applications:
https://www.aaschool.ac.uk/STUDY/ONLINEAPPLICATION/visitingApplication.php?schoolID=303
For any queries, please email: brazilvisitingschool@aaschool.ac.uk.…
s, each made from two Nurbs curves, each with different surface properties.
Curves A1 and A2 have 2 control points:
startpoint and endpoint
Curves B1 and B2 on the other hand were drawn with 6 control points each.
What's more, those point's aren't equally distanced from one another.
The lofts inherit the position of control points of the profile curves.
The distribution of control points in the loft direction is uniform.
So no suprise here:
You can think of Nurbs curves as rubber bands and of Nurbs surfaces as rubber sheets. The areas with less control points would correspond to streched rubber.
Now lets imagine you take an A4 piece of rubber, lay in on a table and draw equally distanced lines on it. When you strech it ununiformally - the distances won't stay equal anymore.
Returning to your first post:
The Divide Surface component operates on u,v values which you can imagine as dimensions of the rubber sheet in relaxed state.
So the result you got was indeed an equaly divided surface, only in the so called "parameter space" of the surface, which doesn't always correspond to the xyz space.
There are methods to divide curves and surfaces in equal distances in the way you want it. For starters check out the Evaluate Lenght component.
I think that's enough teory for today. Have fun!
JJ…
ive collaborative environment.
TYPE : Course module and Workshop
The event is open for anybody interested from all the fields of design, including: architecture, interior design, furniture design, product design, fashion design, scenography, and engineering.
1. COURSE MODULE (20-23 April 2014) - optional
+ type: 3 days intensive course regarding basic knowledge in parametric design (LEVEL 1)
+ software: Rhinoceros & Grasshopper
+ plugins: Kangaroo, Weaver Bird, Lunch box, Ghowl, Geco
+ achievements:
- acquainting to the components & the concept of Generative Design
- understanding the strategies in Algorithmic Design
- how to easily insert simple mathematical equation into the project to gain more control
- how to utilize proper plugins with respect to their nature of the project
- interacting with different analysis platforms such as Ecotect & remote controller
- solving several exercises with different scales( 2D- 3D ) during each phase of the workshop
2. WORKSHOP (23-27 April 2014)
A 5 day Design-Based Research Workshop exploring new techniques in Digital Architecture/Fabrication, with a specific focus on the use of generative systems and parametric modeling as tools for creative expression.
Our ultimate goal is to increasing the efficiency of utilizing digital tools in parallel with geometric performance of the primitive design agent.
+ + CONCEPT
Fashion and Architecture are both based on basic life necessities – clothing and shelter.
However, they are also forms of self-expression – for both creators and consumers.
Both fashion and architecture affect our emotional being in many ways.
The agenda of this workshop is to investigate on the overlap between these two areas of design, art & fashion.
Fashion and architecture express ideas of personal, social and cultural identity, reflecting the concerns of the user and the ambition of the age. Their relationship is a symbiotic one and throughout history, clothing and buildings have echoed each other in form and appearance. This only seems natural as they not only share the primary function of providing shelter and protection for the body, but also because they both create space and volume out of flat, two-dimensional materials.
While they have much in common, they are also intrinsically different – address the human scale, but the proportions, sizes and shapes differ enormously.
+ + + OBJECTIVES
So far, Architects have been using techniques such as folding, bending etc. to create space, structural roofs or different other structural shapes.
The agenda of this workshop goes further with the investigation of algorithmic thinking through generative tools Integrated in design.
The challenge is creating a bridge that connects these two areas of design, architecture and fashion that perform at two opposite scales.
+ + + + TECHNICAL BRIEF
In the early stages physical models and low-tech strategies will be used, allowing the participants to gain a greater understanding of materials, fabrication and assembly methods as well as simple, yet pragmatic structural solutions.
Later in the workshop these strategies will be digitalized and elaborated using software visualizing tools such as Rhinoceros and the algorithmic plug-in Grasshopper.…
windows. I manage to have proper HBZones with RADMaterials and EPConstructions (I've run Daylight calculation on them successfully), but when I plug the zones to GrizzlyBear this error appears:
Solution exception:'EPZone' object has no attribute 'getCurrentLoads'
In addition, something similar happens when I plug these HBZones to the newest decomposeByType component, althought it works properly when plugged to the previous version of it. This is what the error says:
Solution exception:'hb_EPZoneSurface' object has no attribute 'BC'
Same thing with SetEPZoneConstruction:
Solution exception:'hb_EPZoneSurface' object has no attribute 'BCObject'
Any thought?
Ander…
mers considering extreme sports reject mainstream retailers and like to check out small stores rather of at chains plus malls. Several smaller retailers discuss trends in sports shoe sales. http://skateszone.com/
Though athletic shoes and sports stores and from doorways retailers have reported somewhat uptick in footwear sales due to the increase in extreme sports, the particular beneficiaries inside the trend are independent surf and skate niche stores.
Some West Coast surf and skate shops stated teenagers and even more youthful Generation Xers are not only rejecting traditional sports, but they're also shunning mainstream retailers and malls meant for smaller niche shops transporting hard-to-come-by brands.
Eddie Miyoshi, district manager at Atomic Garage, a 3-store chain situated in Gardena, Calif., stated the soaring recognition of skateboard footwear has boosted the retailer's total footwear business 20-thirty percent this year, rather of '95.
Skate footwear presently represent 80-90 % of Atomic Garage's shoe sales, while couple of years back, Dr. Martens and Timberland drove the retailer's footwear business.
Like many retailers, Miyoshi pointed to Airwalk since the trend's catalyst.
However, if Airwalk broadened its distribution to larger chains, which are frequently located in malls, only a few skate shoe customers adopted. Rather, many youthful males have switched for your skate shops for additional elusive brands like Etnies, Duffs, and Electricity Footwear by Circus. By refusing to market bigger retailers or sports stores, these brands are increasing their cachet among youthful consumers.
"Kids don't want stuff which have been within the shops,In . Miyoshi added.
Searching ahead, Miyoshi forecasted skate shoe sales will remain strong through spring '97 provided "the [hot] vendors don't auction other [non-particularly shop] retailers."
"Skaters and non-skaters are rebelling against mainstream retailers so on to surf and skate shops for many looks," echoed Mark Richards, co-online sources Val Surf, a 3-store chain situated in North Hollywood, Calif. Soaring sales of skate footwear have driven total footwear receipts up 25 percent this year rather of '95.
"The quantity of that increase might be connected while using exposure of maximum games? I am unsure. [Skate footwear] may also be actually the think about the moment,In . Richards acknowledged. And in relation to getting this right look, youthful customers can be very picky.
"Skateboard footwear is a huge category for people, but we're not able to own the brands, Etnies, Duffs, Electricity and Nice, simply because they won't sell us," stated Mark Anderson, buyer at Chick's Sports, a six-store chain in Covina, Calif. "We have people coming every single day requesting them." Consequently, skate footwear have consistently ongoing to obtain about 5 % of Chick's overall footwear business. http://skateszone.com/the-top-8-best-skateboards-for-beginners-reviews-2017/
Nonetheless, some outdoors, niche sports and sports retailers are noting the growing recognition and coverage of maximum sports will receive a modest impact on footwear sales. Trailrunning footwear and approach/outdoors crosstrainers will be the two groups benefiting the very best inside the recognition. Like the skate shoe business, some retailers realize that styling instead of function frequently drives sales of individuals footwear.
"At this time the merchandise is a lot more visual than function," stated Chet James, gm of Super Jock 'N Jill, Dallas, speaking about trailrunning footwear. Still, James noted the current hype over adventure sports helps draw more customer traffic. "The marketing campaigns and media help bring growing figures of people in, nonetheless they frequently occasions day an issue that increases results on their own account,Inch he conceded.
John Wilkinson, executive vp inside the 85-store chain Track 'N Trail, Eldorado Hillsides, Calif., stated the shop has "seen some activity in approach footwear," but he requested the amount of consumers depend in it commercially sport. And, instead of accelerating total footwear business, Wilkinson speculated elevated sales of approach footwear and trailrunners are gnawing away at traditional hiking shoe and boot volume.
But Dan Bazinet, president of Overland Exchanging, a 34-store chain situated in Westford, Mass., believes the company-new looks have breathed existence for the wilting hiking boot category. "[Approach-type footwear] don't represent the lion's participate the hiking market, nonetheless they have elevated the hiking business and provided us extra sales," Bazinet stated.
He designated Timberland's Treeline Series and Rockport's Leadville line as strong performers. Unsurprisingly, he noted the company-new looks are attractive to youthful consumer base than traditional hikers.
For that month of June, sales of men's hikers were up 49 percent at Overland, rather of June '95, while sales of women's hikers were up 17 % for that month. Bazinet also attributed elevated sales that shops walked inside the hiking business, departing that business for that specialists.
Some retailers draw a good example concerning the hiking boom of two yrs ago combined with the current extreme sport phenomenon. "Plenty of bigger chains will get a specific percent in the industry while [extreme] sports remain a fad because they are selling cost-point type gear," described Steven Carre, assistant hard goods buyer at Adventure 16, a six-store chain situated in Hillcrest.
"However individuals [true enthusiasts] will say `we need real gear' and may shown up at us. That will help us after a while. What Size Skateboard good for an 3 4 5 6 7 8 9 10 11 12 13 14 year old
…
like to use a single VRay material as a template for creating multiple identical materials with different colors within the GH environment (instead of creating manually in the document).
I have gotten as far as creating the materials. Now I need to add them to the document material table so that they can be used with Giulio's rendering component (which looks for either Rhino.Display.DisplayMaterial or a String that references a document object). I'm not going to learn C# to modify his script, so I am catering to its demands.
Private Sub RunScript(ByVal M As Object, ByVal C As Color, ByRef Mat As Object)
Dim mTemp As Rhino.DocObjects.Material mTemp = CType(M, Rhino.DocObjects.Material) If mTemp.Name.Length > 0 Then mTemp.DiffuseColor = C Dim nTemp As String = mTemp.Name & "_" & C.R & "_" & C.G & "_" & C.B mTemp.Name = nTemp End If
Rhino.DocObjects.Tables.MaterialTable.Add(mTemp) Mat = mTemp
End Sub
The code throws the error: Reference to a non-shared member requires an object reference. (line 96)
Do I understand that the material has to be assigned to a particular object in order to enter the Material Table? Can I assign it to a Layer instead? Any ideas? A better way to do this?
Thanks,
Marc
…
cannot be cast to [B]CustomClassXY. Type A originates from 'CustomLib, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' in the context 'LoadNeither' in a byte array. Type B originates from 'CustomLib, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' in the context 'LoadFrom' at location 'C:\Users\T\AppData\Roaming\Grasshopper\Libraries\CustomLib.gha'. (line: 96)This is how I do the casting:List<CustomLib.SomeClass.CustomClassXY> AllINPUTs = new List<CustomLib.SomeClass.CustomClassXY>();
for (int i = 0 ; i < INPUT.Count; i++)// { AllINPUTs.Add((CustomLib.SomeClass.CustomClassXY) INPUT[i]); }
The GHA is compiled with two namespaces, one for the component one for the library.
Thanks a lot in advance,
Tim…
obably only using Rhino4, but three people who bought Rhino2, Rhino3 and Rhino4 respectively are three people using one version each.
We certainly don't know how many Grasshopper users there are. Grasshopper installers are not always downloaded via our website or -once downloaded- used multiple times (think class-rooms and company IT). We have no way of knowing whether someone who once downloaded Grasshopper is still using it. That being said, Grasshopper is downloaded ~100 times a day from our website and this number has been fairly constant since 2009 (though slightly on the increase, I'd say ~80 a day in early 2009). There are nearly 96,000 unique email addresses in the Grasshopper mailing list, more than 455,000 in the Rhino4 mailing list.
The size of this community (>17,000 registered users) is a much better indicator of user-base magnitude, but even here we have no idea how many people registered but are now no longer using GH as we do not collect use statistics (yet).
--
David Rutten
david@mcneel.com
Poprad, Slovakia
…