connected hyperspace where architecture can be fluid, flexible and vivid, yet the aspect of materiality requires more attention.
Action-designed structures begin to move beyond the utopian proposals of the 20th century’s manifestos and hold a place in the world of realized designs. The AA Athens Visiting School aims to bring users closer to the built environment while revisiting habits of designing, building and experiencing space through materiality. Understanding materiality and form as a ‘unified whole’, the programme integrates manufacturing techniques through the experimentation fabrication of prototypes at a 1:1 scale.
Prominent Features of the workshop/ skills developed
Participants become part of an active learning environment where the large tutor to student ratio allows for personalized tutorials and debates.
The toolset of the Athens VS includes but is not limited to Processing and Grasshopper for Rhinoceros, as well as design analysis software.
Participants gain hands-on experience on digital fabrication.
Design seminars and a series of lectures support the key objectives of the programme, disseminating fundamental computational techniques, relevant critical thinking, theoretical understanding and professional awareness.
Applications
1) You can make an application by completing the online application found under ‘Links and Downloads’ on the AA Visiting School page. If you are not able to make an online application, email visitingschool@aaschool.ac.uk for instructions to pay by bank transfer. 2) Once you complete the online application and make a full payment, you are registered to the programme. A CV or a portfolio is NOT required.
The deadline for applications is 28 June.
Location AKTO College – Athens Campus 11Α Evelpidon Street (Pedion Areos) Athens, 113 62, Greece
Fees
The AA Visiting School requires a fee of £695 per participant, which includes a £60 Visiting membership fee. Fees do not include flights or accommodation, but accommodation options can be advised.
Eligibility The workshop is open to current Undergrad and Graduate architecture and design students, PhD candidates and young professionals. Software Requirements: Adobe Creative Suite, Rhino 5.
For more information, please visit:
http://www.aaschool.ac.uk/STUDY/VISITING/athens
http://ai.aaschool.ac.uk/athens/
For inquiries, please contact:
alexandros.kallegias@aaschool.ac.uk…
perienced with grasshopper, but so far I've managed to combine the following:
Giulio Piacentino's "Catenary arch from height" script
Pirouz Nourian's "Mobius" script (Obtained from a friend)
End Result:
Here's where I'm stuck: I want the mobius twist to revolve around the midpoint of the arch, but the script uses the input values to determine the endpoints, resulting in a weird sinuous shape when viewed from above. Also, the secondary end points (generated by the mobius script, determining the width of the surface) are generated by default along the z axis, resulting in an arch that only touches the "ground" at two points. I attempted to work around this issue by trying to force the zHeight parameter to correspond with the y axis (thus rotating the arch 90 degrees so it would lay "flat"), but the script interprets the third point as a value and not as an actual point to bisect. I thought this might be an issue with the C# component that I obtained from Giulio Piacentino's script, so I attempted to tinker around with the source code. Unfortunately, I'm not fluent in C# so I only managed to mess everything up (I've since recovered the code from the cache). Anybody got some ideas? -BC …
ARRAY with certain spatial order or mechanism under consideration of ecological design. The evaluation and definition of “ARRAY” are open to applicants’ imaginations. While the term “ecological” is subjected to many definitions: social, ecological, sustainable, its re-evaluations are open to students’ interpretations. Entrants are free to choose or make site, real or virtual.
ELIGIBILITY
Open to international students in the fields of architecture and design related disciplines from an accredited four-year or five-year architecture program. Graduates with certificate in 2011 are accepted. Teamed collaboration consisting of no more than 3 students in the above mentioned fields is permitted. Works submitted must be of applicants’ original works. Works done through school studios are accepted, but limited to 2011 term.
ENTRY FEE
Free
DEADLINES
Online Registration deadline: Oct 30th, 2011, 17:00 Taipei Time
(Upon completing registration, applicant will receive a registration number via email.)
Submission deadline: email sent by Nov 3rd, 2011, 17:00 Taipei Time
SUBMISSION REQUIREMENTS
This is a digital competition and no hardcopies are necessary. Entrants must submit their proposal via email no later than Nov 3rd, 2011 17:00 (Taipei Time) to the following email address:
hojenhwang@mail.ntut.edu.tw
The project submission must contain the following files:
1. Two A1 boards in portrait format (594mm x 841mm), with identification number at the upper right corner. Names and other identifying information are not allowed on front side of the boards. The resolution of the boards must be 300dpi, RGB mode and saved as JPG files.. The files must be named after the registration number followed by the board number. For example: 03956-board1.jpg and 03956-board2.jpg.
2. A DOC file containing the project discription (600 words max). This file must be named after the registration number followed by the word "discription". For example: 03956-discription.doc.
3. A scan of statement form. This file must be named after the registration number followed by the word "statement_scan". For example: 03956-statement_scan.jpg.
4. All the files must be placed in a ZIP folder named after your registration number. For example: 03956.zip. Size of the ZIP folder is suggested to be less than 15mb, while size more than 25mb will not be accepted
AWARDS
(1) Gold Prize winner will be awarded TWD 60,000 and a trophy.
(2) Silver Prize winner will be awarded TWD 30,000 and a trophy
(3) Bronze Prize winner will be awarded TWD 15,000 and a trophy
(4) Honorable Mention winners will be awarded TWD 5,000 and a merit certificate
Winners will be announced and notified by mid of Nov, 2011.
JURY
Two stages of open jury. Details to be announced
PUBLIC EXHIBITION
Nov 13, 2011~ Nov 18, 2011 at NTUT, Taipei
…
Added by Yu-Min Su at 2:03am on September 23, 2011
he Cordyceps. Maybe some of you find this helpful/useful.
So basically, the Cordyceps is a physical module with 4 knobs and 1 slider. The knobs give an output between 1 and 1000, while the physical slider outputs 0-359. And of course, for this physical module I wrote a plugin to communicate with it. The knobs are intended to be the variables that modifies the design, while the physical slider is intended to be connected to the camera component.
Here I will put up "the recipe" for all to make their own module. You will be able to download the plugin as well.
Please send me a message if you want the 3D-files for the knobs, the box and slider knob. They've been made to directly 3D-print.
Plugin:
https://github.com/zakadjeb/Cordyceps/blob/master/Cordyceps/Cordyce...
Code for Arduino IDE:
https://github.com/zakadjeb/Cordyceps/blob/master/Arduino/_Arduino_...
What you need:
1x - Arduino (Leonardo, UNO or whatever)
4x - Potentiometers
1x - Sliding potentiometer
1x - Breadboard
Bundle of jump wires.
1. So, a potentiometer is a variable resistor, which is basically a component that changes the resistance between the voltage and the ground.
If A is supplied with 5V then B must be connected to Ground. The W will give "read" the resistance, and thus should be placed in Analog input (A0-A5) on the Arduino. The slider potentiometer works the same way.
2. Now connect the 4 pots to each their Analog input. The slider is supposed to be in A4. So to make sure:
A0: Knob1
A1: Knob2
A2: Knob3
A3: Knob4
A4: Slider
3. Now it's time to connect the voltage! Using the breadboard, the voltage can be sent through 1 line, the Ground as well. It should be quite easy to connect them.
4. Now, download the Arduino IDE and copy-paste the code I supplied above. In the IDE, you need to let it know which Arduino you're working with, and which port is should send the script.
5. Almost there. Download the plugin. Open the port you're using through the plugin. Set Start to True and the Cordyceps should be within you.
This recipe will be updated!
Let me know if there are any issues.
// Zakaria Djebbara…
he Cordyceps. Maybe some of you find this helpful/useful.
So basically, the Cordyceps is a physical module with 4 knobs and 1 slider. The knobs give an output between 1 and 1000, while the physical slider outputs 0-359. And of course, for this physical module I wrote a plugin to communicate with it. The knobs are intended to be the variables that modifies the design, while the physical slider is intended to be connected to the camera component.
Here I will put up "the recipe" for all to make their own module. You will be able to download the plugin as well.
Please send me a message if you want the 3D-files for the knobs, the box and slider knob. They've been made to directly 3D-print.
Plugin:
https://github.com/zakadjeb/Cordyceps/blob/master/Cordyceps/Cordyce...
Code for Arduino IDE:
https://github.com/zakadjeb/Cordyceps/blob/master/Arduino/_Arduino_...
What you need:
1x - Arduino (Leonardo, UNO or whatever)
4x - Potentiometers
1x - Sliding potentiometer
1x - Breadboard
Bundle of jump wires.
1. So, a potentiometer is a variable resistor, which is basically a component that changes the resistance between the voltage and the ground.
If A is supplied with 5V then B must be connected to Ground. The W will give "read" the resistance, and thus should be placed in Analog input (A0-A5) on the Arduino. The slider potentiometer works the same way.
2. Now connect the 4 pots to each their Analog input. The slider is supposed to be in A4. So to make sure:
A0: Knob1
A1: Knob2
A2: Knob3
A3: Knob4
A4: Slider
3. Now it's time to connect the voltage! Using the breadboard, the voltage can be sent through 1 line, the Ground as well. It should be quite easy to connect them.
4. Now, download the Arduino IDE and copy-paste the code I supplied above. In the IDE, you need to let it know which Arduino you're working with, and which port is should send the script.
5. Almost there. Download the plugin. Open the port you're using through the plugin. Set Start to True and the Cordyceps should be within you.
This recipe will be updated!
Let me know if there are any issues.
// Zakaria Djebbara…
, Engineer and Researcher from France with broad programming experience. He is the author of the City in 3D Rhinoceros plugin for creation of buildings according to geojson file and with real elevation. Guillaume already created a new component: "Address to Location". It enables getting latitude and longitude values for the given address:
2) Support of Bathymetry data: automatic creation of underwater (sea/river/lake floor) terrain. This feature is now available through new source_ input of the "Terrain generator" component. Here is an example of terrain of the Loihi underwater volcano, of the coast of Hawaii:
3) A new terrain source has been added: ALOS World 3D 30m. ALOS is a Japanese global terrain data. Gismo "Terrain Generator" component has been using SRTM 30m terrain data, which hasn't been global and was limited to -56 to +60 latitude range. With this addition, it is possible to switch between SRTM and ALOS World 3D 30m models with the use of source_ input.
4) 9 new components have been added:
"Address To Location" - finds latitude and longitude coordinates for the given address.
"XY To Location" - finds latitude and longitude coordinates for the given Rhino XY coordinates. "Location To XY" - vice versa from the previous component: finds Rhino XY coordinates for the given latitude longitude coordinates. "Z To Elevation" - finds elevation for particular Rhino point. "Rhino text to number" - convert numeric text from Rhino to grasshopper number. "Rhino unit to meters" - convert Rhino units to meters. "Deconstruct location" - deconstructs .epw location. "New Component Example" - this component explains how to make a new Gismo component, in case you are interested to make one. We welcome new developers, even if you contribute a single component to Gismo! "Support Gismo" - gives some suggestions on how to make Gismo better, how to improve it and support it.
5) Ladybug "Terrain Generator" component now supports all units, not only Meters. So any Gismo example file which uses this component, can now use Rhino units other than Meters as well. Thank you Antonello Di Nunzio for making this happen!!
Basically just forget about this yellow panel:
This panel is not valid anymore, so just use any unit you want.
6) A number of bugs have been fixed, reported in topics for the last couple of weeks. We would like to thank members in the community who invested their time in testing, finding these bugs and reporting them: Rafat Ahmed, Peter Zatko, Mathieu Venot, Abraham Yezioro, Rafael Alonso. Thank you guys!!! Apologies if we forgot to mention someone.
The version 0.0.2 can be downloaded from here:
https://github.com/stgeorges/gismo/zipball/master
And example files from here:
https://github.com/stgeorges/gismo/tree/master/examples
Any new suggestions, testing and bug reports are welcome!!…
Added by djordje to Gismo at 5:13pm on March 1, 2017
; GH, this one came out and rhinoceros is disappear...like this
it said " Rhinoceros5's working is stopped. because some problems occured so Rhinoceros5 can't work correctly no longer " then I have no choice but terminate Rhinoceros.
There are some discussion about RhinoIronPython installing numpy though, no one has same problem like me. so Please somebody tell me!!
and one more question...just in case, I tried to install numpy into ironPython2.7
C:\Program Files (x86)\IronPython 2.7>ipy "C:\Program Files (x86)\IronPython 2.7\ironpkg-1.0.0..py" --installBootstrapping: c:\users\owner\appdata\local\temp\tmp2nand1\ironpkg-1.0.0-1.egg 118 KB [.................................................................]
C:\Program Files (x86)\IronPython 2.7>ironpkg -hUsage: ironpkg-script.py [options] [name] [version]
.
.
.
C:\Program Files (x86)\IronPython 2.7>ironpkg scipyWrote configuration file: C:\Users\owner\.ironpkg=============================================================================Traceback (most recent call last): File "C:\Program Files (x86)\IronPython 2.7\ironpkg-script.py", line 10, in <module> File "C:\Program Files (x86)\IronPython 2.7\lib\site-packages\enstaller\main.py", line 364, in main File "C:\Program Files (x86)\IronPython 2.7\lib\site-packages\enstaller\indexed_repo\chain.py", line 27, in __init__ File "C:\Program Files (x86)\IronPython 2.7\lib\site-packages\enstaller\indexed_repo\chain.py", line 67, in add_repo File "C:\Program Files (x86)\IronPython 2.7\lib\site-packages\enstaller\utils.py", line 92, in write_data_from_url File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 435, in open File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 407, in _call_chain File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 654, in http_error_302 File "C:\Program Files (x86)\IronPython 2.7\Lib\httplib.py", line 1261, in __init__ File "C:\Program Files (x86)\IronPython 2.7\lib\site-packages\enstaller\utils.py", line 73, in open_url File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 154, in urlopen File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 547, in http_response File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 467, in error File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 429, in open File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 446, in _open File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 407, in _call_chain File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 1240, in https_open File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 1167, in do_openAttributeError: 'module' object has no attribute '_create_default_https_context'
C:\Program Files (x86)\IronPython 2.7>
how can I deal with this error?…
ed file and code below:
Color ColorAt(Mesh mesh, int faceIndex, double t0, double t1, double t2, double t3) { // int rc = -1; var color = Rhino.Display.Color4f.Black;
if( mesh.VertexColors.Count != 0) { // test to see if face exists if( faceIndex >= 0 && faceIndex < mesh.Faces.Count ) { /// Barycentric quad coordinates for the point on the mesh /// face mesh.Faces[FaceIndex].
/// If the face is a triangle /// disregard T[3] (it should be set to 0.0).
/// If the face is /// a quad and is split between vertexes 0 and 2, then T[3] /// will be 0.0 when point is on the triangle defined by vi[0], /// vi[1], vi[2]
/// T[1] will be 0.0 when point is on the /// triangle defined by vi[0], vi[2], vi[3].
/// If the face is a /// quad and is split between vertexes 1 and 3, then T[2] will /// be -1 when point is on the triangle defined by vi[0], /// vi[1], vi[3]
/// and m_t[0] will be -1 when point is on the /// triangle defined by vi[1], vi[2], vi[3].
MeshFace face = mesh.Faces[faceIndex];
// Collect data for barycentric evaluation. Color p0, p1, p2;
if(face.IsTriangle) { p0 = mesh.VertexColors[face.A]; p1 = mesh.VertexColors[face.B]; p2 = mesh.VertexColors[face.C]; } else { if( t3 == 0 ) { // point is on subtriangle {0,1,2} p0 = mesh.VertexColors[face.A]; p1 = mesh.VertexColors[face.B]; p2 = mesh.VertexColors[face.C]; } else if( t1 == 0 ) { // point is on subtriangle {0,2,3} p0 = mesh.VertexColors[face.A]; p1 = mesh.VertexColors[face.C]; p2 = mesh.VertexColors[face.D]; //t0 = t0; t1 = t2; t2 = t3; } else if( t2 == -1 ) { // point is on subtriangle {0,1,3} p0 = mesh.VertexColors[face.A]; p1 = mesh.VertexColors[face.B]; p2 = mesh.VertexColors[face.D]; //t0 = t0; //t1 = t1; t2 = t3; } else { // point must be on remaining subtriangle {1,2,3} p0 = mesh.VertexColors[face.B]; p1 = mesh.VertexColors[face.C]; p2 = mesh.VertexColors[face.D]; t0 = t1; t1 = t2; t2 = t3; } }
/** double r = t0 * p0.FractionRed() + t1 * p1.FractionRed() + t2 * p2.FractionRed(); double g = t0 * p0.FractionGreen() + t1 * p1.FractionGreen() + t2 * p2.FractionGreen(); double b = t0 * p0.FractionBlue() + t1 * p1.FractionBlue() + t2 * p2.FractionBlue();
ON_Color color; color.SetFractionalRGB(r, g, b);
unsigned int abgr = (unsigned int)color; rc = (int) ABGR_to_ARGB(abgr); **/ var c0 = new Rhino.Display.Color4f(p0); var c1 = new Rhino.Display.Color4f(p1); var c2 = new Rhino.Display.Color4f(p2); float s0 = (float) t0; float s1 = (float) t1; float s2 = (float) t2;
float R = s0 * c0.R + s1 * c1.R + s2 * c2.R; float G = s0 * c0.G + s1 * c1.G + s2 * c2.G; float B = s0 * c0.B + s1 * c1.B + s2 * c2.B; color = new Rhino.Display.Color4f(R, G, B, 1); } } return color.AsSystemColor(); }
…