problem later) to fit more shapes that are otherwise won't fit in.
On the example below horizontal rectangle couldn't fit in but its rotated analog could and thus was placed in.
Later, when placed shapes are used to generate frames, because of this rotation, the position of the starting points changes and because of the approach I use to generate the frames some angle values are attached to the wrong corners, this brakes the frame shape and looks like this (on the left the frame of sick shape and on the right the frame of the healthy shape):
Again, this happens because the angle values are assigned to the specific corners (points) and previously rotated shapes get these all messed up:
Easy fix, don't rotate the shapes, problem is, I've already baked a good number of them for later use. I'd like to avoid regeneration because it takes a lot of time and without rotation I constrict the algorithm even more.
Better fix, use a different approach, this is where I'd like to hear suggestions and kicks in a right direction. Please take a look at my definition. It works but I have a feeling like giving an amputee a job of sweeping the floor.
…
lla progettazione parametrica e le tecniche di modellazione algoritmica per la generazione di forme complesse
___________________________________________________________________________________
luogo:
Sala meeting Holiday Inn Inn Turin C.so Francia Piazza Massaua 21 – TORINO
Scadenza iscrizioni: 25 Novembre 2011 – ore 15.00
___________________________________________________________________________________
info e prenotazioni:
Le Penseur (coordinamento formazione)
info@lepenseur.it
081 564 21 84
347 548 71 78
quote di partecipazione e programma (formato PDF)
ulteriori informazioni sui corsi PLUG > IT
___________________________________________________________________________________
PROGRAMMA DEL CORSO:
GIORNO_01 | 01 Dicembre 2011
10.00 – 10.30: presentazione workshop
10.30 – 11.30: introduzione alla progettazione parametrica: teoria, esempi, casi studio
11.30 – 13.00: Grasshopper: concetti base, logica algoritmica, interfaccia grafica
13.00 – 14.00: break
14.00 – 16.00: nozioni fondamentali: componenti, connessioni, data flow
16.00 – 18.00: esercitazione
GIORNO_02 | 02 Dicembre 2011
10.00 – 12.00: funzioni matematiche e logiche, serie, gestione dei dati
12.00 – 13.00: analisi e definizione di curve e superfici
13.00 – 14.00: break
14.00 – 16.00: analisi e definizione di curve e superfici
16.00 – 18.00: definizione di griglie e pattern
GIORNO_03 | 03 Dicembre 2011
10.00 – 12.00: trasformazioni geometriche, paneling
12.00 – 13.00: image sampler
13.00 – 14.00: break
14.00 – 18.00: data tree: gestione di dati complessi
GIORNO_04 | 04 Dicembre 2011
10.00 – 12.00: digital fabrication: teoria ed esempi
12.00 – 13.00: nesting: scomposizione di oggetti tridimensionali in sezioni e posizionamento su piani di taglio per macchine a controllo numerico CNC
13.00 – 14.00: break
14.00 – 18.00: esercitazione…
ceros.
Public concerné /
Architectes et designers, utilisateurs de Rhino souhaitant paramétrer Rhinocéros à l’aide de Grasshopper,
programme associant des composants et une structure de graphe interagissants avec le modèle Rhino.
Une bonne connaissance de Rhinocéros est nécessaire. La langue de la formation est le français.
Structure et Objectif de la formation /
La formation se déroule sur 3 jours : les 2 premières journées sont consacrées aux « fondamentaux » de
Grasshopper avec en préambule une introduction au design et à l’architecture paramétrique et leurs impacts
dans la conception, la création et la construction.
La troisième journée sous forme d’atelier est dédiée à l’étude de cas concrets proposés par les stagiaires, qui,
quelques jours avant la formation, pourront envoyer leurs projets par mail à - info AT rhinoforyou DOT com -
Les stagiaires, après la formation, pourront rester en contact avec les formateurs de HDA par le biais du
blog complexitys.com et le twitter @HDA_Paris. La durée de cette formation permettra d’atteindre une
autonomie et une bonne compréhension basée sur des exemples concrets.
Programme ind icatif des notions traitéES pendan t la formation /
Introduction à la conception Paramétrique . Rhinoscript, Grasshopper: différences et similarités . Interface
graphique de Grasshopper . Objets, Données, Listes . Opérateurs scalaires : La mathématique de
Grasshopper . Gestions des données : la logique de Grasshopper . Vecteurs, Points, Lignes, Surfaces : La
géométrie de Grasshopper . Listes, Arbres, Branches . Le dessin paramétrique: exercices divers et exemples
. Références, Bibliographie, Support de cours . Ateliers d’architecture et design paramétrique (3ème jour) .
Moda lité de la formation /
Venir avec un PC portable équipé de Rhinocéros version 4.0 SR 7 et de la dernière version du plug-in
Grasshopper (téléchargeable sur www.grasshopper3d.com).
Le coût du stage de 3 jours est de 1050 € HT par personne.
Réserver votre place dès que possible car les places sont limitées à 10 participants maximum.
Inscriptions et renseignements: Jacques Hababou, info AT rhinoforyou DOT com
Pour en savoir plus sur l’architecture paramétrique: www.complexitys.com…
nter the programming world and tinker more complex, interactive solutions. We will also explore advanced programming paradigms. There is no class official programming language, as both C# and Vb.Net are possible on the participant’s side, and all examples will be provided in both C# and Vb.Net. Additionally, we will see how to get started writing full .Net plug-ins. Finally, we will have time to explore user’s own proposals on the third day.
Day 1 Morning: programming introduction in .Net
• The Grasshopper scripting components. Choosing a .Net language. Language developments
• Variables declaration, assignment and utilization. Operators. Methods [functions]. Calls
• Classes: declaration and instancing. Constructors. Importing a namespace. On3dPoints, OnLines
• Arrays declaration and usage. Lists. Adding to arrays and lists, advantages and opportunities.
Afternoon: patterns
• About OOP (object oriented programming) as opposed to procedural programming. Discussion
• Example of OOP good code reuse: sorting points by coordinates using the .Net SDK classes
• Lists as input parameters. Trees as input parameters. Usage and limitations
• Finding resources: on the net with website that can help getting started and troubleshoot. And books
Day 2 Morning: extending Grasshopper functionality with our definitions
• Store data between updates. The use of fields [globals, or static locals]
• Examples on how to use stored data between updates: a simple agents simulation
• Baking geometry with scripting directly into the Rhino document. Baking with names
• Passing custom types from a scripted component to another one. Our own code reusability
• Rendering an animation from Grasshopper. How to get started and final results
Afternoon: customizing our tools
• Our Rhino plug-in with Visual Studio C# [Vb.Net] Express Edition & wizard. Parametric mesher
• Writing a custom Grasshopper component: hacking an exporter for our data to Excel
Day 3 All day: personal project
• Rehearsal on any example from the first two days. A project that you want to start on your own, being it a Rhinoceros plug-in, a Grasshopper assembly or a script. Example might be to send data through network with UDP to Processing
MINIMUM REQUIREMENTS
A good foundation of Grasshopper visual programming is mandatory. You will need a level which corresponds to the Grasshopper 101 course outline. Examples of things that will not be covered in this course are: sorting document spheres by diameter, paneling of a surface with grasshopper components. You are expected to already know these from the Grasshopper course.…
hopper no requiere de conocimientos de programación o scripting para permitir al diseñador trabajar de forma generativa y paramétrica. No son necesarios conocimientos previos de Grasshopper pero sí de Rhino a nivel básico.
Controlmad es Centro Formador Autorizado Rhinoceros y Rhino fab Studio.
Nuestros profesores son Instructores Autorizados Rhinoceros con experiencia universitaria, nacional e internacional.
El curso y los ejercicios a desarrollar están enfocados a diseñadores, arquitectos, ingenieros y estudiantes.
En este curso introductorio el alumno se familiarizará con términos básicos de la estructura de Grasshopper, como “listas de datos”, “dominios”, “estructuras en árbol”, etc.
Es un curso de 18 horas, con el que se pretende entrar en la lógica de trabajo de Grasshopper mediante diversos ejercicios, de forma que el alumno sea capaz posteriormente de desarrollar sus propias gramáticas, con la confianza que da comprender los términos básicos de programación sobre los que se apoya todo el sistema de trabajo de Grasshopper.Para este curso no son necesarios conocimientos previos de Grasshopper, pero sí de Rhino (a nivel básico).
También se vincula el programa con la impresión 3D aprendiendo a exportar archivos desde Grasshopper con los requisitos mínimos de impresión 3D. Se realizará una demo de impresión en el aula.
El primer día del curso se le facilita al alumno un manual-tutorial con los ejercicios a realizar, en PDF.
A la finalización del curso, y siempre que el alumno haya asistido al 80% de las clases, se le otorgará un diploma oficial acreditativo del curso.
Fechas: 5, 6, 12 y 13 de marzo
Horario: sábado y domingo 16 - 20,30h (Madrid, CET)
Lugar: Sesiones On-line en directo a través de nuestra plataforma online.controlmad.com
…
creating the structural frame, finding the endpoints, linking these endpoints with curves and afterwards lofting the surfaces between the curves.
The results were quite nice, however, the procedure is very time consuming and inefficient. There is just too much copy-pasting involved.
(see attached file: "Old Attempts.zip" )
Mesh relaxation:
I have later on used Daniel Piker's tutorials on Mesh Relaxation and realized that this might be the way to go.
The link to these online tutorials on wewanttolearn.net is:
https://wewanttolearn.wordpress.com/2011/10/22/mesh-relaxation-kangaroo-tutorial/
His tutorials, however, only deal with mesh boxes which are ideal cubes. He then joins them together in various directions, but it is under 90 degrees angle.
( see attached file: "Daniel Pikers Examples" )
What I would like to achieve:
I want my bridges to go in all directions and angles, not just under 90 degree angle.
Ideally I would like to make a square (polygon) follow a curve (which moves in all axis) at certain number of division points. I would then loft these squares into a mesh and use that shape as a mesh box. I would later use this mesh box and relax it the same way as Daniel Piker used the cubes in his tutorial. The anchor points are only the vertices of the squares which create the lofted mesh box.
( see attached file: "New Attempts" )
As you can see below this procedure works even if the curve is moving in all directions not only along xy axis. There are, however, many problems connected to it.
The problem:
Despite all the effort I cannot seem to come up with a design where I would be able to draw a random curve which would be the guideline for my mesh box and then apply this box to one definition in order to relax the mesh and create the shape that I want. Without this I am again forced into a lot of copy pasting as the final mesh box is made out of several sections.
Also is there any way I could make the final resulting mesh a bit smoother? Increasing the number of mesh faces is probably the only way, right?
Thank you guys so much for any potential help.
All best,
Luka
…
Introduzione a Grasshopper", il primo manuale su Grasshopper.
.
I corsi PLUG IT nascono dalla volontà di promuovere le nuove tecnologie digitali di supporto alla progettazione e condividere il know-how maturato attraverso ricerca, collaborazione con i più importanti studi di architettura e pubblicazioni internazionali.
.
Verranno introdotte le nozioni base di Grasshopper approfondendo le metodologie della progettazione parametrica e le tecniche di modellazione algoritmica per la generazione di forme complesse. Il corso è rivolto a studenti e professionisti con esperienza minima nella modellazione 3D e si articolerà in lezioni teoriche ed esercitazioni.
. Argomenti trattati:
- Introduzione alla progettazione parametrica: teoria, esempi, casi studio - Grasshopper: concetti base, logica algoritmica, interfaccia grafica - Nozioni fondamentali: componenti, connessioni, data flow
- Funzioni matematiche e logiche, serie, gestione dei dati - Analisi e definizione di curve e superfici
- Definizione di griglie e pattern complessi - Trasformazioni geometriche, paneling - Attrattori, image sampler
- Data tree: gestione di dati complessi - Digital fabrication: teoria ed esempi - Nesting: scomposizione di oggetti tridimensionali in sezioni piane per macchine CNC
.
Verrà rilasciato un attestato finale.
.
Ulteriori info e programma completo su: www.arturotedeschi.com e su www.samilolab.it…
ceros.
Public concerné /
Architectes et designers, utilisateurs de Rhino souhaitant paramétrer Rhinocéros à l’aide de Grasshopper, programme
associant des composants et une structure de graphe interagissants avec le modèle Rhino.
Une bonne connaissance de Rhinocéros est nécessaire. La langue de la formation est le français.
Structure et Objectif de la formation /
La formation se déroule sur 3 jours : les 2 premières journées sont consacrées aux « fondamentaux » de Grasshopper
avec en préambule une introduction au design et à l’architecture paramétrique et leurs impacts dans la conception, la
création et la construction.
La troisième journée sous forme d’atelier est dédiée à l’étude de cas concrets proposés par les stagiaires, qui, quelques
jours avant la formation, pourront envoyer leurs projets par mail à info AT rhinoforyou DOT com
Les stagiaires, après la formation, pourront rester en contact avec les formateurs de HDA par le biais du blog
complexitys.com et le twitter @HDA_Paris. La durée de cette formation permettra d’atteindre une autonomie et une
bonne compréhension basée sur des exemples concrets.
3 Formules possibles /
3 jours ( Initiation+Atelier ) : du lundi 20 septembre au mercredi 22 septembre
2 jours ( Initiation ) : lundi 20 et mardi 21 septembre
1 jour ( Atelier ) : mercredi 22 septembre
Programme ind icatif des notions traitéES pendan t la formation /
Introduction à la conception Paramétrique . Rhinoscript, Grasshopper: différences et similarités . Interface
graphique de Grasshopper . Objets, Données, Listes . Opérateurs scalaires : La mathématique de
Grasshopper . Gestions des données : la logique de Grasshopper . Vecteurs, Points, Lignes, Surfaces : La
géométrie de Grasshopper . Listes, Arbres, Branches . Le dessin paramétrique: exercices divers et exemples
. Références, Bibliographie, Support de cours . Ateliers d’architecture et design paramétrique (3ème jour) .
Moda lité de la formation /
Venir avec un PC portable équipé de Rhinocéros version 4.0 SR 7 et de la dernière version du plug-in
Grasshopper (téléchargeable sur www.grasshopper3d.com).
Le coût du stage est de 350 € HT/jour par personne.
Réserver votre place dès que possible car les places sont limitées à 10 participants maximum.
Inscriptions et renseignements: Jacques Hababou, info AT rhinoforyou DOT com
Pour en savoir plus sur l’architecture paramétrique: www.complexitys.com…
uired information, a poor representation of data evolve misreading messages and by turn ambiguous responses especially with complex data. Inforgraphics are graphic visual representations of information, data or knowledge intended to present complex information quickly and clearly. In the nowadays flow of complex information, Infographics is the key for optimized visual communication. The use of infographics is an important step towards developing a pedagogical approach that draws on visuals where 90% of Information is transmitted to the brain so it is crucial to tickle the optic nerves to get people excited about data. The workshop investigates how computational tools can aid in designing and controlling complex information to be easily understood in addition to improve cognition by utilizing graphics to enhance the human visual system’s ability to see patterns and trends and much more likely to be remembered in today’s fast – paced environment. This workshop investigates multiple computational tools and techniques of developing coefficient visualization of data types including; network, statistical and hierarchal data. The workshop objective is to reconsider visual representation a promising design tool for architects, artists and designers. /// Application To apply, please follow this link to fill the application form https://docs.google.com/forms/d/1HOv6c1_LzhHNJU5n_FLvuhC-Yg75HDfbEcq6TN6mulI/viewform /// Fees 1200 EGP for students / 1500 EGP for graduates and young professionals more info on the workshop webpage: http://www.encodestudio.net/#!infographics/cqvl
POSTS
…
ike using something like the Z vector, but technically you can use any vector you want. This vector will actually determine the static rotatation of all the planes, so you can control that here if you like. One important thing that I've noticed is that the closer the vector is to the plane of the curve or if its too similar to one of the tangent vectors, the more likely you'll have "flipping"
2) Take the cross product between the tangent and the static vector. This will be your first perpendicular vector, which you can use for the X component of the plane.
3) Take the cross product between the tangent and the result of the previous cross product. Use this result as the Y component of the plane. All three components (X, Y, and Z (which is the tangent vector)) are all perpendicular to each other now.
After you've done that you should have planes that decrease twisting. If your curve is not planar, then there will always be some twisting in the frames, but it will be minimal enough to use them effectively.
There also may be "flipping" within the frames, which means one (or both) of two things. First, you could have planes that have reversed their vectors, so the X vector is properly oriented, but pointing down when it should be pointing up. Second, the X and Y vectors could have potentially swapped, so that Y "should" be X and X "should" be Y. In order to check these things, you'll need to do a few tests. The first one is find out whether the vector (X or Y) of the plane your testing is pointing in the opposite direction of previous vector. The second test is to find out whether the vector (X or Y) of the plane your testing is perpendicular to the previous vector. In both cases, an angle test between the two vectors will be able to tell you what you need to know, but you will likely NEVER get exactly 180 for an opposite test or 90 for a perpendicular test. That means that you have to choose a range with which to determine that a given vector is opposite or perpendicular.
You should start testing the X vector to see if anything is wrong. If you find that the X vector is fine, then just move on because Rhino will only allow you to create right handed planes, and the Z vector (the tangent) will always be the same.
I don't believe that there's a native function within the old dotNET SDK for calculating angles, so use the example at the link below. It basically takes the arcCosine of the Dot Product of the two vectors your testing to return the angle in Radians. I'm not sure if this function is included in RhinoCommon or not....
http://wiki.mcneel.com/developer/sdksamples/anglebetweenvectors…