ails.
Some word about the mesh... (see Image_01)
I took a flat 4 points NURBS surface as imput (very easy, it defines the total area of my pavilion) and some points (that defines the contact with the ground).
Then I extracted a grid of points from the NURBS (Surface_Util_Divide surface) and compared 'em with the contol points, in order to associate to each grid's point its own attractor (Vector_Point_Closest Point).
Than I moved the points down. I used the distance from each point to its attractor (inverted) as amplitude for the vector of the movement, in order to say: the nearer you are to the control point, the more intense your movement will be. During this operation I've passed the distances' data list into a graph mapper (Params_Special_Graph Mapper), in order to regulate in a very intuitive and interactive way the shaping of my canopy.
At the end of the process I asked GH for a simple Delaunay mesh (Mesh_Triangulation_Delaunay Mesh). It's a very cool command, I believe!!!
Ok, now some word about the component, it's design and it's repetition/adaptation to the mesh...
(see Image_02)
I took the mesh and extracted components on first and faces's information on second. Then I selected and separated the vertexes (1°, 2°, 3°) of each triangular face into threee well defined list.
Then I re-created the triangles' edges. Please pay attention because it's not the same if you use output information from Delaunay components, because here we need a justapposition of edges where triangles touches each others.
After this work I joined the edges and found their centroid. At the same time I found the mid point of each edge.
Now the component... (see Image_03)
It' a little bit longer to describe: I'll try to be synthetic.
Substantially it is a loft from a curve to a point, repeated three times for each triangle (Surface_Freeform_Extrude Point). The point is an elevation of the centroid of the triangle (you can choose if the exstrusion has a single height or it's related to an attractor. In my case it was fixed). The curve is combination of things. There's an arch, which starts on the edge (there's an offset from the corner) end terminates on the same edge (on the other side, obviously). While it's generation the arch passes through a third point which belong to another segment. This last connects the mid point of the original edge (base triangle) with the centroid. The result is a kind of polyline, with two segments and an arch. If you go back to the image of the component that I posted probably you'll understand what I'm saying better than with the definition.
The posit…
ns. but first allow me to explain what i'm trying to do: i have a serial device i want to talk to, but i have to do it using some sort of handshaking. for instance, when i send a command/data, i need to wait for an appropriate response before sending another. i have used andy payne's general serial components from firefly, but i don't think they'll work for what i want to do, and in general, i want to know how to do this from scratch. i'm using the pyserial library to do the comm, and i can get it to work within one script. here's an example of a working (mostly) port open/close script (x=input param for baud, y=input param for port name, z=boolean input param for open/close):
import serialmyPort=serial.Serial()myPort.baudrate = xmyPort.port = yif z == True: try: myPort.open() except: print "Something went wrong. Cannot open port." if myPort.isOpen() == True: print myPort.name + " is open" if z != True: try: myPort.close() except: print "Something went wrong. Cannot close port." if myPort.isOpen != True: print myPort.name + " is closed"
this all works well and good. here are my questions:
1) I can open the port and then close it. however, if i try to re-open it, i get an access denied error. it seems rhino is holding the port open, as i have to re-start rhino to get it working again. i read through the discussions and didn't see any definitive answers to this problem. any advice?
2) I'd like to share this port with other components (or at least break up the functions of opening/closing the port and read/write, not unlike how the firefly components are organized), but i have no idea how to share an object instance between components. i did see that there is a sticky dict and tried to add myPort to it, but i kept getting errors in the other component when i try to use the object's methods. for instance:
Component 1 Script:
import serial
import scriptcontext
myPort=serial.Serial("COM4", 9600)
scriptcontext.sticky['myPort']=myPort
Component 2 Script:
import serial
import scriptcontext
myPort=scriptcontext.sticky['myPort']
print myPort.read()
but i get messages like:
Runtime error (MissingMemberException): 'Serial' object has no attribute '_port_handle'
any assistance would be greatly appreciated!!
best,
~BB~…
.
Today we have gone live, and the plugin is available on Food4Rhino. You will find an installer package, sample files, and a demo video on getting started:
http://www.food4rhino.com/project/human-ui
Visit the Bitbucket Repo and poke around in the code:
https://bitbucket.org/andheum/humanui
Check out today's coverage in Architect Magazine:
http://www.architectmagazine.com/technology/nbbj-releases-human-ui-to-bring-parametric-modeling-to-the-masses_o
Finally join our group and ask any questions or post any comments here:
http://www.grasshopper3d.com/group/human-ui
See below for detailed description!
----------------------------------
Human UI
Primary Development by:
Lead Developer: Andrew Heumann / andheum / @andrewheumann
Product Manager: Marc Syp / marcsyp / @mpsyp
Contributing Developer: Nate Holland / nateholland / @_NateHolland
Gone are the days of faking a user interface by laying out sliders and text panels and hiding wires on the Grasshopper canvas. Human UI interfaces are entirely separate from the Grasshopper canvas and leverage the power of Windows Presentation Foundation (WPF), a graphical subsystem for rendering user interfaces in the Windows environment.
OLD NEW
In other words: Human UI makes your GH definition feel like a Windows app. Create tabbed views, dynamic sliders, pulldown menus, checkboxes, and even 3D viewports and web browsers that look great and make sense to anyone--including designers and clients with no understanding of Grasshopper.
Human UI has been in development at NBBJ for over a year, as part of a larger NBBJ Design Computation initiative to deliver our tools internally as Products -- with fully automated installation, managed dependencies, analytics, documentation, and “magical” user experience. Human UI has been a huge component of the user experience part of this puzzle, and we are excited to share it with the larger Grasshopper community so that others can benefit from it and contribute to its development.
The initial release of Human UI is accompanied by a few simple examples to get you started, but we have developed sophisticated user interfaces with these tools at NBBJ and will slowly be rolling out more advanced examples. We also look forward to opening up the development to the community and seeing what new features and paradigms we can add.
Download the plugin at Food4Rhino and get started building Custom UIs for Grasshopper right away! We are happy to answer any questions or field discussion in the dedicated Grasshopper Group. Please join us!
Join the Grasshopper Group
http://www.grasshopper3d.com/group/human-ui
Download the plugin + sample files
http://www.food4rhino.com/project/human-ui
Visit the Bitbucket Repo
https://bitbucket.org/andheum/humanui
We look forward to seeing where this project takes you, please share your projects made with Human UI!
Sincerely,
Design Computation Leadership Team, NBBJ
…
nter the programming world and tinker more complex, interactive solutions. We will also explore advanced programming paradigms. There is no class official programming language, as both C# and Vb.Net are possible on the participant’s side, and all examples will be provided in both C# and Vb.Net. Additionally, we will see how to get started writing full .Net plug-ins. Finally, we will have time to explore user’s own proposals on the third day.
Day 1 Morning: programming introduction in .Net
• The Grasshopper scripting components. Choosing a .Net language. Language developments
• Variables declaration, assignment and utilization. Operators. Methods [functions]. Calls
• Classes: declaration and instancing. Constructors. Importing a namespace. On3dPoints, OnLines
• Arrays declaration and usage. Lists. Adding to arrays and lists, advantages and opportunities.
Afternoon: patterns
• About OOP (object oriented programming) as opposed to procedural programming. Discussion
• Example of OOP good code reuse: sorting points by coordinates using the .Net SDK classes
• Lists as input parameters. Trees as input parameters. Usage and limitations
• Finding resources: on the net with website that can help getting started and troubleshoot. And books
Day 2 Morning: extending Grasshopper functionality with our definitions
• Store data between updates. The use of fields [globals, or static locals]
• Examples on how to use stored data between updates: a simple agents simulation
• Baking geometry with scripting directly into the Rhino document. Baking with names
• Passing custom types from a scripted component to another one. Our own code reusability
• Rendering an animation from Grasshopper. How to get started and final results
Afternoon: customizing our tools
• Our Rhino plug-in with Visual Studio C# [Vb.Net] Express Edition & wizard. Parametric mesher
• Writing a custom Grasshopper component: hacking an exporter for our data to Excel
Day 3 All day: personal project
• Rehearsal on any example from the first two days. A project that you want to start on your own, being it a Rhinoceros plug-in, a Grasshopper assembly or a script. Example might be to send data through network with UDP to Processing
MINIMUM REQUIREMENTS
A good foundation of Grasshopper visual programming is mandatory. You will need a level which corresponds to the Grasshopper 101 course outline. Examples of things that will not be covered in this course are: sorting document spheres by diameter, paneling of a surface with grasshopper components. You are expected to already know these from the Grasshopper course.…
phere with the maximum number of triangles but not much than a defined threshold.
I scaled that mesh just to fit Rhino grid, but it is not mandatory. What is useful, is to scale not uniformly the mesh (Scale NU). It could be done after cellular modifier applied or before or before and after. The 3 options are possible in the script. If you don’t need them just put 1 in scale sliders.
Ellipsoid mesh is the populated with points, I put 2 independents populations to randomize a bit further. For each vertices of the mesh the closest distance from the populated points is calculated.
Here is an illustration in color of this distance.
This distance is then used to calculate a bump. If domain for bump is beginning with negatives values to 0, it carves the mesh. Instead it bumps/inflates it.
Some images to illustrate the difference with populating 100 points with one or two populations.
Here some images to illustrate the application of scale before carving or after.
Next phase apply noise. At the moment I don't find it good.…
Introduzione a Grasshopper", il primo manuale su Grasshopper.
.
I corsi PLUG IT nascono dalla volontà di promuovere le nuove tecnologie digitali di supporto alla progettazione e condividere il know-how maturato attraverso ricerca, collaborazione con i più importanti studi di architettura e pubblicazioni internazionali.
.
Verranno introdotte le nozioni base di Grasshopper approfondendo le metodologie della progettazione parametrica e le tecniche di modellazione algoritmica per la generazione di forme complesse. Il corso è rivolto a studenti e professionisti con esperienza minima nella modellazione 3D e si articolerà in lezioni teoriche ed esercitazioni.
. Argomenti trattati:
- Introduzione alla progettazione parametrica: teoria, esempi, casi studio - Grasshopper: concetti base, logica algoritmica, interfaccia grafica - Nozioni fondamentali: componenti, connessioni, data flow
- Funzioni matematiche e logiche, serie, gestione dei dati - Analisi e definizione di curve e superfici
- Definizione di griglie e pattern complessi - Trasformazioni geometriche, paneling - Attrattori, image sampler
- Data tree: gestione di dati complessi - Digital fabrication: teoria ed esempi - Nesting: scomposizione di oggetti tridimensionali in sezioni piane per macchine CNC
.
Verrà rilasciato un attestato finale.
.
Ulteriori info e programma completo su: www.arturotedeschi.com e su www.samilolab.it…
connected hyperspace where architecture can be fluid, flexible and vivid, yet the aspect of materiality requires more attention.
Action-designed structures begin to move beyond the utopian proposals of the 20th century’s manifestos and hold a place in the world of realized designs. The AA Athens Visiting School aims to bring users closer to the built environment while revisiting habits of designing, building and experiencing space through materiality. Understanding materiality and form as a ‘unified whole’, the programme integrates manufacturing techniques through the experimentation fabrication of prototypes at a 1:1 scale.
Prominent Features of the workshop/ skills developed
Participants become part of an active learning environment where the large tutor to student ratio allows for personalized tutorials and debates.
The toolset of the Athens VS includes but is not limited to Processing and Grasshopper for Rhinoceros, as well as design analysis software.
Participants gain hands-on experience on digital fabrication.
Design seminars and a series of lectures support the key objectives of the programme, disseminating fundamental computational techniques, relevant critical thinking, theoretical understanding and professional awareness.
Applications
1) You can make an application by completing the online application found under ‘Links and Downloads’ on the AA Visiting School page. If you are not able to make an online application, email visitingschool@aaschool.ac.uk for instructions to pay by bank transfer. 2) Once you complete the online application and make a full payment, you are registered to the programme. A CV or a portfolio is NOT required.
The deadline for applications is 28 June.
Location AKTO College – Athens Campus 11Α Evelpidon Street (Pedion Areos) Athens, 113 62, Greece
Fees
The AA Visiting School requires a fee of £695 per participant, which includes a £60 Visiting membership fee. Fees do not include flights or accommodation, but accommodation options can be advised.
Eligibility The workshop is open to current Undergrad and Graduate architecture and design students, PhD candidates and young professionals. Software Requirements: Adobe Creative Suite, Rhino 5.
For more information, please visit:
http://www.aaschool.ac.uk/STUDY/VISITING/athens
http://ai.aaschool.ac.uk/athens/
For inquiries, please contact:
alexandros.kallegias@aaschool.ac.uk…
s levels of detail by subdividing a 6 sided cube mesh and projecting its vertices according to a referenced height map. This is one of the standard conventions for building full sizes planets. At the lowest level (0) the mesh planet is made of 6 pieces(each 32x32 resolution). The next level down (1) is made of 24 pieces... 6 divided by 4 = 24. Level (2) is 96 quads etc etc. The script will generate each quad at its sub-division level and compare edge vertices to neighboring quads. It will then make sure any shared vertices are in fact at the same projected vector. This ensures a planet quad with edge vertices that match.
The problems comes in texturing each quad.
If I build the quad as a nurb surface from points I can place the texture easily because each surface UV maps squarely to my texture map (which is also square).
If I build the quad as a mesh I cannot just apply the square texture to the mesh UVs. This is because when you unwrap the UVs from a mesh they will not unwrap like a nurb surface's UVs. Therefore to get the correct mapping I would have to manipulate each UV back to an evenly aligned array (which is 1024 points in a 32x32 resolution UV). Maya and blender have 'relax uv' and 'align UV' functions but they don't do the trick and manual corrections are out of the question. So why not skip the mesh method and use the nurb method?
I did this and there is a trade off. The nurb will accept the material texture I want with no other work on my end but when I export the object as an .obj rhino creates its own mesh to describe the nurb(with various unsatisfactory setting options). This works great up to a point because at some level the interpreted mesh will have vertices that do no match at the edges, ie .. creating visible seams in the mesh. The picture below is the nearly seamless planet at LOD(1) made of 24 quads, each with 32x32 vertice resolution and a 512x512 jpg texture running in Unity3d 5. It works but at close level there are seams. This will be resolved simply by having the next LOD(x) instantiate before getting close enough to see the seam but at core nerd level I want the seamless mesh.
So, I can make the seamless mesh but I can not realistically texture map it. I can also make the nurb surface from points and texture it at the expense of the edge vertices matching. I am at the split in the road but I want to have my cake and eat it too. Thoughts, comments, trolls...?
Thanks for reading =)
Footnote: For you pros I am not using seamless noise across the map I am using grasshopper to sew up my otherwise non perfect edges.
Other programs in the pipeline:
-WorldMachine 2
-Wilbur
-Photoshop
-Unity3d…
rves/holes. However, the Kangaroo script itself is prone to locking up so it seems like it might take forever. You can even double click stop the timer from the Windows task bar, I hadn't noticed that before:
You have to use that or right click disable the timer since even with the Reset toggle button input set to True the timer itself locks up the script a bit when you are changing things around.
Just setting the min/max numbers both to a desired mesh size gives a uniform mesh:
Oh weird, it's about if the timer is right click set to so small an interval that it gets ahead of Kangaroo! When you see how long each cycle is taking with the Display > Canvas Widgets > Profiler you just set the timer for above that and the interface comes back into being responsive. It only takes a few Kangaroo cycles to do the inflation, so a full second timer interval is even workable.
A finer mesh:
It's funny running it so slow since it overinflates at first, bulging out, before it equilibrates.
You have control over inflation pressure and mesh stiffness, for a variety of effects.
This is a good system once I realized the timer needed to be mellowed out.
What made it work was the fast custom meshing since a normal mesh is awful and MeshMachine wouldn't work with sharp corner holes at all, breaking out of the boundary even if I fixed curves or vertices or did the equivalent with NURBS surfaces instead of a starting mesh.
There is an initiation time for Kangaroo that doesn't show up on its Profiler time that happens even with the timer off.
There are some fine areas that can't inflate with a reasonable mesh setting:
Worth playing with but no match for ArtCAM since it suffers odd delays in between working fast. If I could get better 2D meshes, that were more adaptive it would be better, but MeshMachine is one of the only re-meshers I know and it's broken for even mildly sharp hole features.
Ah, how about a crude mesh that is then subdivided, guaranteeing inner vertices everywhere? Sort of works, but is still too dense. Way too dense to even do anything. The subdivision triangulates the quads, vastly increasing the mesh wire density. Better just to make a finer initial mesh with plenty of quads.…
Added by Nik Willmore at 12:57am on February 21, 2016
ve Intermediate Insight of Computational Design Strategies While Exploring Rangoli Art form in 2 Dimension and 3Dimesion in which Participants will not only be trained to Digitally Design using Parametric software's but they will also be trained to Fabricate them in reality.
This Course will be explored in manner where Participants will understand inter-dependency of Rhinoceros3D & Grasshoper3D through a unique Hybrid Teaching Method While Exploring Rangoli Geometry .
The course will also take participants through Topics such as - Computational Thinking, - Computational / Parametric Design, - Computational Rangoli Exploration, - Digital Fabrication, - 3D Visualization ( Rhino3D 6), - Making Info-graphics & Design Diagrams ( Rhino3d 6 ).
Participants will also be doing a Project at the last Leg of Workshop in which they will implement the skill they gained in first Few Weeks.
{ Tutor } Nitant Pixelkar (Computational Artist / Designer, Mumbai)
Nitant Hirlekar A.k.a. Pixelkar, is a Computational Artist. He graduated from Rachana Sansad school of Interior Design 2011, Mumbai. In Academics He Bagged Two Gold and One Silver Medal on National Level.
In his post academic days, he came across the Emerging Computational Techniques in Design industry in which Algorithm serves as a main Functional part. He uses Algorithms to Deconstruct the Captured images in Pixelated form using the Grid of the Desired Indian Art Forms.
He Heads Collective Group Named "Mutation Lab” which is a multidisciplinary Design & Art Cell. Where they Explore Computational Approach while Designing Various Scales Spatial Installation, Digital Fabrication, Interactive Installations and Computational Consultancy for Various Architects.
He has exhibited his first artwork in Kalaghoda Arts Festival for in 2014 And further in 2016 and 2017.In 2015 he exhibited in Dharavi Biennale” organized by Wellcome Trust,London & Sneha Organisation, Mumbai Which was internationally acclaimed. In 2016 he got Featured on a TV show - The Creative Indian's as an Absolut Creative Indian of the Week.
Academically he is been involved in Many Computational Design Workshops / Elective Studios for School of Interior Design (Rachna Sansad), LS Raheja College of Architecture & Rat-Lab (Delhi).
{ Participants } The Course is aimed at Architecture, Interior Design, Product Design,Furniture Design & Fashion Design Students and Professionals. However we would be thrilled to have any Interdisciplinary Artist / Creator/ Maker to join the Course as well.
{ Level }
Intermediate
{ Timing } Monday To Friday - 6:00 PM to 9:00 PM (15 Hours/ Week = 5 Week X 15 Hours = 75 Hours )
{ Dates } Registration Ends - 24th April 2020 **Subejct to Availablity
{ Workshop Dates } 4th May 2020 To 5th June 2020
{ Venue } Lower Parel,Mumbai ( Details To Be Announced )
{ Schedule }
{Registration Form}…