393&xg_source=activity
In this case we see a geometrically approach, which doesn’t works efficient, because it required knowing how they behaviors together before, and I think it is not the ‘really behaves’.
To make the structure ‘really behaves’ I tried use kangaroo and the result works very well! As you can see I simply give the 2-set reverse UForce, and then they start to rotate until they found their equilibrium. That means 90 degree rotation. I was wondering what we can do to make a endless-rotation. I am mean 360 degree or more like this:
https://www.youtube.com/watch?v=4owFczeqqMQ
By the way, I try to give supports which allow a horizontal movement only (Just curious how we could keep the anchor-movement horizontally and in the same layer, for example like usual supports for compression ring…). I use the AnchorXYZ, but Kangaroo-Engine seems don’t accept its output.
So maybe some one knows a better solution?
…
Added by Jon to Kangaroo at 7:40am on March 11, 2014
problem later) to fit more shapes that are otherwise won't fit in.
On the example below horizontal rectangle couldn't fit in but its rotated analog could and thus was placed in.
Later, when placed shapes are used to generate frames, because of this rotation, the position of the starting points changes and because of the approach I use to generate the frames some angle values are attached to the wrong corners, this brakes the frame shape and looks like this (on the left the frame of sick shape and on the right the frame of the healthy shape):
Again, this happens because the angle values are assigned to the specific corners (points) and previously rotated shapes get these all messed up:
Easy fix, don't rotate the shapes, problem is, I've already baked a good number of them for later use. I'd like to avoid regeneration because it takes a lot of time and without rotation I constrict the algorithm even more.
Better fix, use a different approach, this is where I'd like to hear suggestions and kicks in a right direction. Please take a look at my definition. It works but I have a feeling like giving an amputee a job of sweeping the floor.
…
he picture (4).
Previously, I had a problem with generating intersections between the two directions of the beams, but a colleague helped me by extending beams, so there was no problem with lines of intersection. But this solution has generated curl (5) at the highest vertex geometry, which I ignored in order to repair it before printing, perhaps this mean my problem with my beam spread properly. Only when the beams is 19, does not jump no problem, but I still can not distribute them properly.
(1)
(2)
(3)
(4)
(5)
I tried to show as simply as possible by removing or signing my code in GHX file.
Thank you in advance for your help
…
t. So here we go!
1. Honeybee is brown and not yellow [stupid!]...
As you probably remember Honeybee logo was initially yellow because of my ignorance about Honeybees. With the help of our Honeybee expert, Michalina, now the color is corrected. I promised her to update everyone about this. Below are photos of her working on the honeybee logo and the results of her study.
If you think I'm exaggerating by calling her a honeybee expert you better watch this video:
Thank you Michalina for the great work! :). I corrected the colors. No yellow anymore. The only yellow arrows represent sun rays and not the honeybee!
2. Yellow or brown, W[here]TH Honeybee is?
I know. It has been a long time after I posted the initial video and it is not fun at all to wait for a long time. Here is the good news. If you are following the Facebook page you probably now that the Daylighting components are almost ready.
Couple of friends from Grasshopper community and RADIANCE community has been helping me with testing/debugging the components. I still think/hope to release the daylighting components at some point in January before Ladybug gets one year old.
There have been multiple changes. I finally feel that the current version of Honeybee is simple enough for non-expert users to start running initial studies and flexible enough for advanced users to run advanced studies. I will post a video soon and walk you through different components.
I think I still need more time to modify the energy simulation components so they are not going to be part of the next release. Unfortunately, there are so many ways to set up and run a wrong energy simulation and I really don’t want to add one new GIGO app to the world of simulation. We already have enough of that. Moreover I’m still not quite happy with the workflow. Please bear with me for few more months and then we can all celebrate!
I recently tested the idea of connecting Grasshopper to OpenStudio by using OpenStudio API successfully. If nothing else, I really want to release the EnergyPlus components so I can concentrate on Grasshopper > OpenStudio development which I personally think is the best approach.
3. What about wind analysis?
I have been asked multiple times that if Ladybug will have a component for wind study. The short answer is YES! I have been working with EFRI-PULSE project during the last year to develop a free and open source web-based CFD simulation platform for outdoor analysis.
We had a very good progress so far and our rockstar Stefan recently presented the results of the work at the American Physical Society’s 66th annual DFD meeting and the results looks pretty convincing in comparison to measured data. Here is an image from the presentation. All the credits go to Stefan Gracik and EFRI-PULSE project.
The project will go live at some point next year and after that I will release the Butterfly which will let you prepare the model for the CFD simulation and send it to EFRI-PULSE project. I haven’t tried to run the simulations locally yet but I’m considering that as a further development. Here is how the component and the logo looks like right now.
4. Teaching resources
It has been almost 11 months from the first public release of Ladybug. I know that I didn't do a good job in providing enough tutorials/teaching materials and I know that I won’t be able to put something comprehensive together soon.
Fortunately, ladybug has been flying in multiple schools during the last year. Several design, engineering and consultant firms are using it and it has been thought in several workshops. As I checked with multiple of you, almost everyone told me that they will be happy to share their teaching materials; hence I started the teaching resources page. Please share your materials on the page. They can be in any format and any language. Thanks in advance!
I hope you enjoyed/are enjoying/will enjoy the longest night of the year. Happy Yalda!
Cheers,
-Mostapha
…
hopper no requiere de conocimientos de programación o scripting para permitir al diseñador trabajar de forma generativa y paramétrica. No son necesarios conocimientos previos de Grasshopper pero sí de Rhino a nivel básico.
Controlmad es Centro Formador Autorizado Rhinoceros y Rhino fab Studio.
Nuestros profesores son Instructores Autorizados Rhinoceros con experiencia universitaria, nacional e internacional.
El curso y los ejercicios a desarrollar están enfocados a diseñadores, arquitectos, ingenieros y estudiantes.
En este curso introductorio el alumno se familiarizará con términos básicos de la estructura de Grasshopper, como “listas de datos”, “dominios”, “estructuras en árbol”, etc.
Es un curso de 18 horas, con el que se pretende entrar en la lógica de trabajo de Grasshopper mediante diversos ejercicios, de forma que el alumno sea capaz posteriormente de desarrollar sus propias gramáticas, con la confianza que da comprender los términos básicos de programación sobre los que se apoya todo el sistema de trabajo de Grasshopper.Para este curso no son necesarios conocimientos previos de Grasshopper, pero sí de Rhino (a nivel básico).
También se vincula el programa con la impresión 3D aprendiendo a exportar archivos desde Grasshopper con los requisitos mínimos de impresión 3D. Se realizará una demo de impresión en el aula.
El primer día del curso se le facilita al alumno un manual-tutorial con los ejercicios a realizar, en PDF.
A la finalización del curso, y siempre que el alumno haya asistido al 80% de las clases, se le otorgará un diploma oficial acreditativo del curso.
Fechas: 5, 6, 12 y 13 de marzo
Horario: sábado y domingo 16 - 20,30h (Madrid, CET)
Lugar: Sesiones On-line en directo a través de nuestra plataforma online.controlmad.com
…
creating the structural frame, finding the endpoints, linking these endpoints with curves and afterwards lofting the surfaces between the curves.
The results were quite nice, however, the procedure is very time consuming and inefficient. There is just too much copy-pasting involved.
(see attached file: "Old Attempts.zip" )
Mesh relaxation:
I have later on used Daniel Piker's tutorials on Mesh Relaxation and realized that this might be the way to go.
The link to these online tutorials on wewanttolearn.net is:
https://wewanttolearn.wordpress.com/2011/10/22/mesh-relaxation-kangaroo-tutorial/
His tutorials, however, only deal with mesh boxes which are ideal cubes. He then joins them together in various directions, but it is under 90 degrees angle.
( see attached file: "Daniel Pikers Examples" )
What I would like to achieve:
I want my bridges to go in all directions and angles, not just under 90 degree angle.
Ideally I would like to make a square (polygon) follow a curve (which moves in all axis) at certain number of division points. I would then loft these squares into a mesh and use that shape as a mesh box. I would later use this mesh box and relax it the same way as Daniel Piker used the cubes in his tutorial. The anchor points are only the vertices of the squares which create the lofted mesh box.
( see attached file: "New Attempts" )
As you can see below this procedure works even if the curve is moving in all directions not only along xy axis. There are, however, many problems connected to it.
The problem:
Despite all the effort I cannot seem to come up with a design where I would be able to draw a random curve which would be the guideline for my mesh box and then apply this box to one definition in order to relax the mesh and create the shape that I want. Without this I am again forced into a lot of copy pasting as the final mesh box is made out of several sections.
Also is there any way I could make the final resulting mesh a bit smoother? Increasing the number of mesh faces is probably the only way, right?
Thank you guys so much for any potential help.
All best,
Luka
…
DP ($$$ aside), GC, and Grasshopper. Arthur’s original question is very important
and the exact question (and hopefully answer) I was hoping to find on a
forum.
“How to take intelligent 3D parametric generative design models (scripting, etc.) into 2D documents?" Or, deliver the 3D design for evaluation, bid, construction, etc.
I am intrigued by Jon’s comments in the same thread and would like to know how I can learn more about the process (and
pitfalls) of turning over a 3D digital generative models to a contractor/fabricator.
Are there any industry guidelines established I could use as a reference to guide our firm through this type of uncharted territory?
Arthur’s question is very reminiscent of 10 years ago when I was frustrated with the amount of time spent on the development of a 3D model design (physical and/or virtual) only to have to wipe the table clean and start the process all over again in 2D in order to document the project for delivery. From this I jumped head first into BIM and Revit, vowing never to go back to unintelligent 2D line work. I am now working on Bentley software (v8i: Microstation and Bentley Architecture) with the access and desire to venture into Generative Components. I am very intrigued by Rhino/Grasshopper primarily with the apparent ease of use and available resources assisting in the learning process – something not really available with Bentley.
In hindsight, as I am doing my software research I think the current use of Revit and BA (Bentley Architecture) are more of a “bridge”
between the past (decades of digital 2D work, i.e. AutoCAD) and where hopefully
we all will be someday in the near future (100% 3D modeling, i.e. Digital
Project??). Without having the experience
it would appear that DP/CATIA (PLM software) are closer to this than any other
type of software. As complicated as the
industry standards are for the automobile and airline industry, I feel we
(architectural industry and others) are heading in a similar direction with
total understanding (PLM/ Evidence Based Design) of a design (a whole other topic). If anything I think the market will begin to
demand it sooner or later.
Gehry (DP) article NY Times:
http://www.nytimes.com/2009/02/11/business/11gehry.html
I know these type of broad discussions (software vs. software) can be blown out of proportion on forums, but I am would like to read
the pulse of those who are already in the trenches (using Grasshopper, CATIA, Digital Project, Generative Components, others??) and hear your thoughts. Just as valuable would be other threads,
industry articles/reviews of 3D parametric generative design software.
Thanks,
Boyd…
Introduzione a Grasshopper", il primo manuale su Grasshopper.
.
I corsi PLUG IT nascono dalla volontà di promuovere le nuove tecnologie digitali di supporto alla progettazione e condividere il know-how maturato attraverso ricerca, collaborazione con i più importanti studi di architettura e pubblicazioni internazionali.
.
Verranno introdotte le nozioni base di Grasshopper approfondendo le metodologie della progettazione parametrica e le tecniche di modellazione algoritmica per la generazione di forme complesse. Il corso è rivolto a studenti e professionisti con esperienza minima nella modellazione 3D e si articolerà in lezioni teoriche ed esercitazioni.
. Argomenti trattati:
- Introduzione alla progettazione parametrica: teoria, esempi, casi studio - Grasshopper: concetti base, logica algoritmica, interfaccia grafica - Nozioni fondamentali: componenti, connessioni, data flow
- Funzioni matematiche e logiche, serie, gestione dei dati - Analisi e definizione di curve e superfici
- Definizione di griglie e pattern complessi - Trasformazioni geometriche, paneling - Attrattori, image sampler
- Data tree: gestione di dati complessi - Digital fabrication: teoria ed esempi - Nesting: scomposizione di oggetti tridimensionali in sezioni piane per macchine CNC
.
Verrà rilasciato un attestato finale.
.
Ulteriori info e programma completo su: www.arturotedeschi.com e su www.samilolab.it…
uired information, a poor representation of data evolve misreading messages and by turn ambiguous responses especially with complex data. Inforgraphics are graphic visual representations of information, data or knowledge intended to present complex information quickly and clearly. In the nowadays flow of complex information, Infographics is the key for optimized visual communication. The use of infographics is an important step towards developing a pedagogical approach that draws on visuals where 90% of Information is transmitted to the brain so it is crucial to tickle the optic nerves to get people excited about data. The workshop investigates how computational tools can aid in designing and controlling complex information to be easily understood in addition to improve cognition by utilizing graphics to enhance the human visual system’s ability to see patterns and trends and much more likely to be remembered in today’s fast – paced environment. This workshop investigates multiple computational tools and techniques of developing coefficient visualization of data types including; network, statistical and hierarchal data. The workshop objective is to reconsider visual representation a promising design tool for architects, artists and designers. /// Application To apply, please follow this link to fill the application form https://docs.google.com/forms/d/1HOv6c1_LzhHNJU5n_FLvuhC-Yg75HDfbEcq6TN6mulI/viewform /// Fees 1200 EGP for students / 1500 EGP for graduates and young professionals more info on the workshop webpage: http://www.encodestudio.net/#!infographics/cqvl
POSTS
…
ike using something like the Z vector, but technically you can use any vector you want. This vector will actually determine the static rotatation of all the planes, so you can control that here if you like. One important thing that I've noticed is that the closer the vector is to the plane of the curve or if its too similar to one of the tangent vectors, the more likely you'll have "flipping"
2) Take the cross product between the tangent and the static vector. This will be your first perpendicular vector, which you can use for the X component of the plane.
3) Take the cross product between the tangent and the result of the previous cross product. Use this result as the Y component of the plane. All three components (X, Y, and Z (which is the tangent vector)) are all perpendicular to each other now.
After you've done that you should have planes that decrease twisting. If your curve is not planar, then there will always be some twisting in the frames, but it will be minimal enough to use them effectively.
There also may be "flipping" within the frames, which means one (or both) of two things. First, you could have planes that have reversed their vectors, so the X vector is properly oriented, but pointing down when it should be pointing up. Second, the X and Y vectors could have potentially swapped, so that Y "should" be X and X "should" be Y. In order to check these things, you'll need to do a few tests. The first one is find out whether the vector (X or Y) of the plane your testing is pointing in the opposite direction of previous vector. The second test is to find out whether the vector (X or Y) of the plane your testing is perpendicular to the previous vector. In both cases, an angle test between the two vectors will be able to tell you what you need to know, but you will likely NEVER get exactly 180 for an opposite test or 90 for a perpendicular test. That means that you have to choose a range with which to determine that a given vector is opposite or perpendicular.
You should start testing the X vector to see if anything is wrong. If you find that the X vector is fine, then just move on because Rhino will only allow you to create right handed planes, and the Z vector (the tangent) will always be the same.
I don't believe that there's a native function within the old dotNET SDK for calculating angles, so use the example at the link below. It basically takes the arcCosine of the Dot Product of the two vectors your testing to return the angle in Radians. I'm not sure if this function is included in RhinoCommon or not....
http://wiki.mcneel.com/developer/sdksamples/anglebetweenvectors…