DP ($$$ aside), GC, and Grasshopper. Arthur’s original question is very important
and the exact question (and hopefully answer) I was hoping to find on a
forum.
“How to take intelligent 3D parametric generative design models (scripting, etc.) into 2D documents?" Or, deliver the 3D design for evaluation, bid, construction, etc.
I am intrigued by Jon’s comments in the same thread and would like to know how I can learn more about the process (and
pitfalls) of turning over a 3D digital generative models to a contractor/fabricator.
Are there any industry guidelines established I could use as a reference to guide our firm through this type of uncharted territory?
Arthur’s question is very reminiscent of 10 years ago when I was frustrated with the amount of time spent on the development of a 3D model design (physical and/or virtual) only to have to wipe the table clean and start the process all over again in 2D in order to document the project for delivery. From this I jumped head first into BIM and Revit, vowing never to go back to unintelligent 2D line work. I am now working on Bentley software (v8i: Microstation and Bentley Architecture) with the access and desire to venture into Generative Components. I am very intrigued by Rhino/Grasshopper primarily with the apparent ease of use and available resources assisting in the learning process – something not really available with Bentley.
In hindsight, as I am doing my software research I think the current use of Revit and BA (Bentley Architecture) are more of a “bridge”
between the past (decades of digital 2D work, i.e. AutoCAD) and where hopefully
we all will be someday in the near future (100% 3D modeling, i.e. Digital
Project??). Without having the experience
it would appear that DP/CATIA (PLM software) are closer to this than any other
type of software. As complicated as the
industry standards are for the automobile and airline industry, I feel we
(architectural industry and others) are heading in a similar direction with
total understanding (PLM/ Evidence Based Design) of a design (a whole other topic). If anything I think the market will begin to
demand it sooner or later.
Gehry (DP) article NY Times:
http://www.nytimes.com/2009/02/11/business/11gehry.html
I know these type of broad discussions (software vs. software) can be blown out of proportion on forums, but I am would like to read
the pulse of those who are already in the trenches (using Grasshopper, CATIA, Digital Project, Generative Components, others??) and hear your thoughts. Just as valuable would be other threads,
industry articles/reviews of 3D parametric generative design software.
Thanks,
Boyd…
Introduzione a Grasshopper", il primo manuale su Grasshopper.
.
I corsi PLUG IT nascono dalla volontà di promuovere le nuove tecnologie digitali di supporto alla progettazione e condividere il know-how maturato attraverso ricerca, collaborazione con i più importanti studi di architettura e pubblicazioni internazionali.
.
Verranno introdotte le nozioni base di Grasshopper approfondendo le metodologie della progettazione parametrica e le tecniche di modellazione algoritmica per la generazione di forme complesse. Il corso è rivolto a studenti e professionisti con esperienza minima nella modellazione 3D e si articolerà in lezioni teoriche ed esercitazioni.
. Argomenti trattati:
- Introduzione alla progettazione parametrica: teoria, esempi, casi studio - Grasshopper: concetti base, logica algoritmica, interfaccia grafica - Nozioni fondamentali: componenti, connessioni, data flow
- Funzioni matematiche e logiche, serie, gestione dei dati - Analisi e definizione di curve e superfici
- Definizione di griglie e pattern complessi - Trasformazioni geometriche, paneling - Attrattori, image sampler
- Data tree: gestione di dati complessi - Digital fabrication: teoria ed esempi - Nesting: scomposizione di oggetti tridimensionali in sezioni piane per macchine CNC
.
Verrà rilasciato un attestato finale.
.
Ulteriori info e programma completo su: www.arturotedeschi.com e su www.samilolab.it…
connected hyperspace where architecture can be fluid, flexible and vivid, yet the aspect of materiality requires more attention.
Action-designed structures begin to move beyond the utopian proposals of the 20th century’s manifestos and hold a place in the world of realized designs. The AA Athens Visiting School aims to bring users closer to the built environment while revisiting habits of designing, building and experiencing space through materiality. Understanding materiality and form as a ‘unified whole’, the programme integrates manufacturing techniques through the experimentation fabrication of prototypes at a 1:1 scale.
Prominent Features of the workshop/ skills developed
Participants become part of an active learning environment where the large tutor to student ratio allows for personalized tutorials and debates.
The toolset of the Athens VS includes but is not limited to Processing and Grasshopper for Rhinoceros, as well as design analysis software.
Participants gain hands-on experience on digital fabrication.
Design seminars and a series of lectures support the key objectives of the programme, disseminating fundamental computational techniques, relevant critical thinking, theoretical understanding and professional awareness.
Applications
1) You can make an application by completing the online application found under ‘Links and Downloads’ on the AA Visiting School page. If you are not able to make an online application, email visitingschool@aaschool.ac.uk for instructions to pay by bank transfer. 2) Once you complete the online application and make a full payment, you are registered to the programme. A CV or a portfolio is NOT required.
The deadline for applications is 28 June.
Location AKTO College – Athens Campus 11Α Evelpidon Street (Pedion Areos) Athens, 113 62, Greece
Fees
The AA Visiting School requires a fee of £695 per participant, which includes a £60 Visiting membership fee. Fees do not include flights or accommodation, but accommodation options can be advised.
Eligibility The workshop is open to current Undergrad and Graduate architecture and design students, PhD candidates and young professionals. Software Requirements: Adobe Creative Suite, Rhino 5.
For more information, please visit:
http://www.aaschool.ac.uk/STUDY/VISITING/athens
http://ai.aaschool.ac.uk/athens/
For inquiries, please contact:
alexandros.kallegias@aaschool.ac.uk…
perienced with grasshopper, but so far I've managed to combine the following:
Giulio Piacentino's "Catenary arch from height" script
Pirouz Nourian's "Mobius" script (Obtained from a friend)
End Result:
Here's where I'm stuck: I want the mobius twist to revolve around the midpoint of the arch, but the script uses the input values to determine the endpoints, resulting in a weird sinuous shape when viewed from above. Also, the secondary end points (generated by the mobius script, determining the width of the surface) are generated by default along the z axis, resulting in an arch that only touches the "ground" at two points. I attempted to work around this issue by trying to force the zHeight parameter to correspond with the y axis (thus rotating the arch 90 degrees so it would lay "flat"), but the script interprets the third point as a value and not as an actual point to bisect. I thought this might be an issue with the C# component that I obtained from Giulio Piacentino's script, so I attempted to tinker around with the source code. Unfortunately, I'm not fluent in C# so I only managed to mess everything up (I've since recovered the code from the cache). Anybody got some ideas? -BC …
r graphics get saved as 24x24 pixel images before they are put into the grasshopper application, which means the icons look like crap when you zoom in. This is the aforementioned problem that needs to be addressed in GH2. There have historically been two approaches to this issue:
Provide pixel images with several sizes.
Render vector graphics directly.
Option 1 is common for apps that do not have variable levels of zoom, such as Windows Explorer. When explorer shows file icons it either shows them in 16x16, 32x32, 48x48, 96x96, or these days, various HUGE sizes. As a result *.ico files allow you put in different images for all these target sizes. Since Grasshopper has variable zoom levels, this is not an ideal solution. Also, it requires a lot more work per icon.
Option 2 is becoming more and more popular as increased graphics speed now allows for the real-time rendering of vector graphics. Yet, you still need a renderer that knows how to draw vector geometry crisply at low sizes. All vector renderers I know just interpolate the geometry linearly and if a line happens to end up 'between pixels' it's just fuzzy.
I don't have hard and fast rules for the icons, but I try to adhere to at least these:
Keep a border of 2 pixels free around the icon content. So basically only use the inner 20x20 pixels rather than the 24x24 you're allowed. This is needed because the drop shadow needs to go there.
Only draw silhouette edges around shapes, not inner creases. Typically a 1-pixel line will do. I prefer to use a dark version of the fill colour rather than black for edges.
Loose curves can be drawn in 1 or 2 pixel thicknesses, depending on how important the curve is.
Try to avoid text in your icons (not always possible).
Stick to 1 colour family per icon, preferably per icon family. You can add highlights with another colour if you must, but too many hues make an icon hard to read (for the example the [Voronoi] icon, it has red, green and blue and it's a bit of a mess, on the other hand [Colour Wheel] has the full spectrum and seems to work quite well...).
Very roughly speaking, if there's both black and red geometry in an icon, it means the red is component input and the black is component output.
Drop shadows are pixel effects, applied to the 24x24 image. They have a blurring radius of 2 pixels, a horizontal offset of 1 pixel to the right, a vertical offset of 1 pixel to the bottom and they are 65% black.
When you use high contrast shapes (for example black edges on a light background) the anti-aliasing provided by vector renderers such as Xara or Illustrator won't be enough to make it look smooth. I'd recommend avoiding high contrast if at all possible, but if not possible then draw a 1-pixel line around the dark bits in 95% transparent black. This effectively extends the anti-aliasing range from 1.5 to 2.5 pixels and it helps make things looks smoother.
--
David Rutten
david@mcneel.com…
s levels of detail by subdividing a 6 sided cube mesh and projecting its vertices according to a referenced height map. This is one of the standard conventions for building full sizes planets. At the lowest level (0) the mesh planet is made of 6 pieces(each 32x32 resolution). The next level down (1) is made of 24 pieces... 6 divided by 4 = 24. Level (2) is 96 quads etc etc. The script will generate each quad at its sub-division level and compare edge vertices to neighboring quads. It will then make sure any shared vertices are in fact at the same projected vector. This ensures a planet quad with edge vertices that match.
The problems comes in texturing each quad.
If I build the quad as a nurb surface from points I can place the texture easily because each surface UV maps squarely to my texture map (which is also square).
If I build the quad as a mesh I cannot just apply the square texture to the mesh UVs. This is because when you unwrap the UVs from a mesh they will not unwrap like a nurb surface's UVs. Therefore to get the correct mapping I would have to manipulate each UV back to an evenly aligned array (which is 1024 points in a 32x32 resolution UV). Maya and blender have 'relax uv' and 'align UV' functions but they don't do the trick and manual corrections are out of the question. So why not skip the mesh method and use the nurb method?
I did this and there is a trade off. The nurb will accept the material texture I want with no other work on my end but when I export the object as an .obj rhino creates its own mesh to describe the nurb(with various unsatisfactory setting options). This works great up to a point because at some level the interpreted mesh will have vertices that do no match at the edges, ie .. creating visible seams in the mesh. The picture below is the nearly seamless planet at LOD(1) made of 24 quads, each with 32x32 vertice resolution and a 512x512 jpg texture running in Unity3d 5. It works but at close level there are seams. This will be resolved simply by having the next LOD(x) instantiate before getting close enough to see the seam but at core nerd level I want the seamless mesh.
So, I can make the seamless mesh but I can not realistically texture map it. I can also make the nurb surface from points and texture it at the expense of the edge vertices matching. I am at the split in the road but I want to have my cake and eat it too. Thoughts, comments, trolls...?
Thanks for reading =)
Footnote: For you pros I am not using seamless noise across the map I am using grasshopper to sew up my otherwise non perfect edges.
Other programs in the pipeline:
-WorldMachine 2
-Wilbur
-Photoshop
-Unity3d…
rves/holes. However, the Kangaroo script itself is prone to locking up so it seems like it might take forever. You can even double click stop the timer from the Windows task bar, I hadn't noticed that before:
You have to use that or right click disable the timer since even with the Reset toggle button input set to True the timer itself locks up the script a bit when you are changing things around.
Just setting the min/max numbers both to a desired mesh size gives a uniform mesh:
Oh weird, it's about if the timer is right click set to so small an interval that it gets ahead of Kangaroo! When you see how long each cycle is taking with the Display > Canvas Widgets > Profiler you just set the timer for above that and the interface comes back into being responsive. It only takes a few Kangaroo cycles to do the inflation, so a full second timer interval is even workable.
A finer mesh:
It's funny running it so slow since it overinflates at first, bulging out, before it equilibrates.
You have control over inflation pressure and mesh stiffness, for a variety of effects.
This is a good system once I realized the timer needed to be mellowed out.
What made it work was the fast custom meshing since a normal mesh is awful and MeshMachine wouldn't work with sharp corner holes at all, breaking out of the boundary even if I fixed curves or vertices or did the equivalent with NURBS surfaces instead of a starting mesh.
There is an initiation time for Kangaroo that doesn't show up on its Profiler time that happens even with the timer off.
There are some fine areas that can't inflate with a reasonable mesh setting:
Worth playing with but no match for ArtCAM since it suffers odd delays in between working fast. If I could get better 2D meshes, that were more adaptive it would be better, but MeshMachine is one of the only re-meshers I know and it's broken for even mildly sharp hole features.
Ah, how about a crude mesh that is then subdivided, guaranteeing inner vertices everywhere? Sort of works, but is still too dense. Way too dense to even do anything. The subdivision triangulates the quads, vastly increasing the mesh wire density. Better just to make a finer initial mesh with plenty of quads.…
Added by Nik Willmore at 12:57am on February 21, 2016
well, very similar input data must result in wildly different hashes. For example, imagine we have an algorithm which computes hashes of text, and the hashes it computes are all numbers between 0 and 999. We then apply this algorithm to a piece of text:
"When Spring comes back with rustling shade" = 385
So far so good. Now imagine we change the text slightly, for example by removing a single "l":
"When Spring comes back with rusting shade" = 973
Minor change -> very different hash. There are of course way more unique texts than there are numbers between 0 and 999. This must therefore mean that a lot of text will result in the same hash. For example "When Spring brings back blue days and fair." may also result in a hash of 385. Because of the pigeonhole principle, there is nothing to be done about this.
Now for the tricky bit. Hashes are often used to validate executable code. Say your friend James at MI6 sends you a small program that will allow you to eavesdrop on Angela Merkel, and -over the phone- he tells you the hashcode for that application. You can then hash the application yourself, verify that it indeed results in the same hashcode and then you know you can trust the executable.
But now Jack from the FBI intercepts the email and adds a few sneaky lines of code to the original application allowing him to determine from your internet search history with up to 95% accuracy whether you like extra cheese on your pizza. The application has now been tampered with, it can no longer be trusted and you should be able to figure this out as it will no longer result in the same hash code.
But wait! Some hashing algorithms are more secure than others. MD5 is now officially considered to be 'hacked' and it is no longer recommended for doing naughty spying. Specifically, Jack will be able to inject his own code in such a way that it does not result in a different hash. Instead, the SHA family of hashers are to be used, as it is not yet known how to trick these hashers.
This is where the problem comes in, because apparently the US government has forcefully disabled the use of MD5 for all purposes. This is a shame because I use it to quickly compare bitmap icons for identicalness so I only have to store an icon in memory once. There is no security hole due to this, because I'm not hashing secure data. MD5 is somewhat faster than SHA, and since I have to hash several hundred icons on Grasshopper start, I opted for the faster one.
(Very) long story short; you're hosed. Grasshopper uses MD5; USgov does not like; Grasshopper does not run on USgov computers.
I'll do some testing to see if I can switch to SHA and then we can see whether or not that solves the problem. This however will take a while as I'm going on a business trip next week and have yet to prepare my presentations.
--
David Rutten
david@mcneel.com…
Added by David Rutten at 12:06pm on March 31, 2014
ed file and code below:
Color ColorAt(Mesh mesh, int faceIndex, double t0, double t1, double t2, double t3) { // int rc = -1; var color = Rhino.Display.Color4f.Black;
if( mesh.VertexColors.Count != 0) { // test to see if face exists if( faceIndex >= 0 && faceIndex < mesh.Faces.Count ) { /// Barycentric quad coordinates for the point on the mesh /// face mesh.Faces[FaceIndex].
/// If the face is a triangle /// disregard T[3] (it should be set to 0.0).
/// If the face is /// a quad and is split between vertexes 0 and 2, then T[3] /// will be 0.0 when point is on the triangle defined by vi[0], /// vi[1], vi[2]
/// T[1] will be 0.0 when point is on the /// triangle defined by vi[0], vi[2], vi[3].
/// If the face is a /// quad and is split between vertexes 1 and 3, then T[2] will /// be -1 when point is on the triangle defined by vi[0], /// vi[1], vi[3]
/// and m_t[0] will be -1 when point is on the /// triangle defined by vi[1], vi[2], vi[3].
MeshFace face = mesh.Faces[faceIndex];
// Collect data for barycentric evaluation. Color p0, p1, p2;
if(face.IsTriangle) { p0 = mesh.VertexColors[face.A]; p1 = mesh.VertexColors[face.B]; p2 = mesh.VertexColors[face.C]; } else { if( t3 == 0 ) { // point is on subtriangle {0,1,2} p0 = mesh.VertexColors[face.A]; p1 = mesh.VertexColors[face.B]; p2 = mesh.VertexColors[face.C]; } else if( t1 == 0 ) { // point is on subtriangle {0,2,3} p0 = mesh.VertexColors[face.A]; p1 = mesh.VertexColors[face.C]; p2 = mesh.VertexColors[face.D]; //t0 = t0; t1 = t2; t2 = t3; } else if( t2 == -1 ) { // point is on subtriangle {0,1,3} p0 = mesh.VertexColors[face.A]; p1 = mesh.VertexColors[face.B]; p2 = mesh.VertexColors[face.D]; //t0 = t0; //t1 = t1; t2 = t3; } else { // point must be on remaining subtriangle {1,2,3} p0 = mesh.VertexColors[face.B]; p1 = mesh.VertexColors[face.C]; p2 = mesh.VertexColors[face.D]; t0 = t1; t1 = t2; t2 = t3; } }
/** double r = t0 * p0.FractionRed() + t1 * p1.FractionRed() + t2 * p2.FractionRed(); double g = t0 * p0.FractionGreen() + t1 * p1.FractionGreen() + t2 * p2.FractionGreen(); double b = t0 * p0.FractionBlue() + t1 * p1.FractionBlue() + t2 * p2.FractionBlue();
ON_Color color; color.SetFractionalRGB(r, g, b);
unsigned int abgr = (unsigned int)color; rc = (int) ABGR_to_ARGB(abgr); **/ var c0 = new Rhino.Display.Color4f(p0); var c1 = new Rhino.Display.Color4f(p1); var c2 = new Rhino.Display.Color4f(p2); float s0 = (float) t0; float s1 = (float) t1; float s2 = (float) t2;
float R = s0 * c0.R + s1 * c1.R + s2 * c2.R; float G = s0 * c0.G + s1 * c1.G + s2 * c2.G; float B = s0 * c0.B + s1 * c1.B + s2 * c2.B; color = new Rhino.Display.Color4f(R, G, B, 1); } } return color.AsSystemColor(); }
…
Introduction to Grasshopper Videos by David Rutten.
Wondering how to get started with Grasshopper? Look no further. Spend an some time with the creator of Grasshopper, David Rutten, to learn the