try to get the output. In this case the output needs to be set before requesting for it. I am doing it with this call:
ret = gsaobj.Output_Init_Arr(1,"Global","A1",14003001,3)
In API help the call is documented like this:
short Output_Init_Arr (long iFlags, string sAxis, string sCase, enum ResHeader header, long num1dpos)
so this call has 5 arguments (long, string, string, long, long) (the enums are defined as longs)
This call works, because when I print the ret, i get 0 that is "succeded" so everything works so far.
Then I request the output with the following:
results = []
ret = gsaobj.Output_Extract_Arr(10,results,numcomponents)
In API help the call is documented like this:
short Output_Extract_Arr(long iRef, SAFEARRAY(struct GsaResults)*arrayResults, long* numComponents)
I am getting the error "
Runtime error (ArgumentException): Could not convert argument 1 for call to Output_Extract_Arr."
So it seems that is not accepting 10 as a long in the beginning (assuming that argument 1 is the first). I already tried passing a variable as long, using long(10) there, nothing works.
Furthermore I don't know if the other two variables are correct like that. I come from VBA where I need to declare everything but AFAIK python is more permissive in this sense. "results" should be a dynamic array of objects and "numcomponents" a long.
Any help would be appreciated!
Thanks! :)
…
thought that architect's love for drawing comes from the necessity of translate abstract ideas into built 3D reality, and the technology behind that 2D representation has not evolve so much until some decades ago. Our teachers come from that times: times when computers try to find their place in the reality representation world. If you try to imagine that people that have always drawn with pencils adapting to this new tools...some become fan of new methods, other just keep the old fashion workflow (like Andrew said in the article, Schumacher VS Graves)
We've bear (at least Andrew and me :P) in 80's with first video games, computers (I still remember my old x286 with 1Mb RAM and 20Mb of HD and that MS-DOS interface)...New technology was natural for us...But there is a big difference between traditional drawing and new computer aided tools: the learning curve. To draw you only need to take a pen and put over a paper (that interface is understood by children easily) , but traditional computational tools (new touch interfaces are out of this group) are based in a complex logic and environment that is not easy to understand for some people.
In the workshops I'm teaching in, I try to put all that tools (new and old one) in my students hands and motivate them to mix and use them together (Andrew knows a little bit about that :P). Why not to make a lines sketch with GH and then print it and render with some markers?; the last step could be scan the result and enhance it in Photoshop adding textures, vegetation, some background...There are no rules, only a bunch of tools to explore and use to develop your ideas, evolve and finally represent them.
I bet to the touch interfaces (with some augmented reality sauce) like that one that will be able to blend both worlds, analog and digital, offering that fluidity and natural interaction that Grave miss in digital tools. And our generation attached to this "not natural" interfaces will need to change its mind and adapt to that new and amazing interface that our children will love.
Only to complete:
<iframe width="560" height="315" src="http://www.youtube.com/embed/aXV-yaFmQNk" frameborder="0" allowfullscreen></iframe>…
Added by Ángel Linares at 5:40pm on September 10, 2012
e volume. The yellow line above.
This volume, green on the above image
So with this there was an intersection with the Brep volume of the chair and the lattice.
After that I used cocoon. Here the parameters I used for the Brep and curve. So The Brep was offsetted.
The model is 80 unit height and cell size is 0.2 so roughly there are 400 divisions in Z. If cubic it will give 6.4 millions of cells. To my point of view it is important to choose well the cell size in order to have not hundred of million of cells. Here 6 millions was usable. The general thing with Cocoon is alwas to test it on small objects first.
A close view of mesh. Edge length is 0.1 unit. There are 6 millions of triangles.
…
mers considering extreme sports reject mainstream retailers and like to check out small stores rather of at chains plus malls. Several smaller retailers discuss trends in sports shoe sales. http://skateszone.com/
Though athletic shoes and sports stores and from doorways retailers have reported somewhat uptick in footwear sales due to the increase in extreme sports, the particular beneficiaries inside the trend are independent surf and skate niche stores.
Some West Coast surf and skate shops stated teenagers and even more youthful Generation Xers are not only rejecting traditional sports, but they're also shunning mainstream retailers and malls meant for smaller niche shops transporting hard-to-come-by brands.
Eddie Miyoshi, district manager at Atomic Garage, a 3-store chain situated in Gardena, Calif., stated the soaring recognition of skateboard footwear has boosted the retailer's total footwear business 20-thirty percent this year, rather of '95.
Skate footwear presently represent 80-90 % of Atomic Garage's shoe sales, while couple of years back, Dr. Martens and Timberland drove the retailer's footwear business.
Like many retailers, Miyoshi pointed to Airwalk since the trend's catalyst.
However, if Airwalk broadened its distribution to larger chains, which are frequently located in malls, only a few skate shoe customers adopted. Rather, many youthful males have switched for your skate shops for additional elusive brands like Etnies, Duffs, and Electricity Footwear by Circus. By refusing to market bigger retailers or sports stores, these brands are increasing their cachet among youthful consumers.
"Kids don't want stuff which have been within the shops,In . Miyoshi added.
Searching ahead, Miyoshi forecasted skate shoe sales will remain strong through spring '97 provided "the [hot] vendors don't auction other [non-particularly shop] retailers."
"Skaters and non-skaters are rebelling against mainstream retailers so on to surf and skate shops for many looks," echoed Mark Richards, co-online sources Val Surf, a 3-store chain situated in North Hollywood, Calif. Soaring sales of skate footwear have driven total footwear receipts up 25 percent this year rather of '95.
"The quantity of that increase might be connected while using exposure of maximum games? I am unsure. [Skate footwear] may also be actually the think about the moment,In . Richards acknowledged. And in relation to getting this right look, youthful customers can be very picky.
"Skateboard footwear is a huge category for people, but we're not able to own the brands, Etnies, Duffs, Electricity and Nice, simply because they won't sell us," stated Mark Anderson, buyer at Chick's Sports, a six-store chain in Covina, Calif. "We have people coming every single day requesting them." Consequently, skate footwear have consistently ongoing to obtain about 5 % of Chick's overall footwear business. http://skateszone.com/the-top-8-best-skateboards-for-beginners-reviews-2017/
Nonetheless, some outdoors, niche sports and sports retailers are noting the growing recognition and coverage of maximum sports will receive a modest impact on footwear sales. Trailrunning footwear and approach/outdoors crosstrainers will be the two groups benefiting the very best inside the recognition. Like the skate shoe business, some retailers realize that styling instead of function frequently drives sales of individuals footwear.
"At this time the merchandise is a lot more visual than function," stated Chet James, gm of Super Jock 'N Jill, Dallas, speaking about trailrunning footwear. Still, James noted the current hype over adventure sports helps draw more customer traffic. "The marketing campaigns and media help bring growing figures of people in, nonetheless they frequently occasions day an issue that increases results on their own account,Inch he conceded.
John Wilkinson, executive vp inside the 85-store chain Track 'N Trail, Eldorado Hillsides, Calif., stated the shop has "seen some activity in approach footwear," but he requested the amount of consumers depend in it commercially sport. And, instead of accelerating total footwear business, Wilkinson speculated elevated sales of approach footwear and trailrunners are gnawing away at traditional hiking shoe and boot volume.
But Dan Bazinet, president of Overland Exchanging, a 34-store chain situated in Westford, Mass., believes the company-new looks have breathed existence for the wilting hiking boot category. "[Approach-type footwear] don't represent the lion's participate the hiking market, nonetheless they have elevated the hiking business and provided us extra sales," Bazinet stated.
He designated Timberland's Treeline Series and Rockport's Leadville line as strong performers. Unsurprisingly, he noted the company-new looks are attractive to youthful consumer base than traditional hikers.
For that month of June, sales of men's hikers were up 49 percent at Overland, rather of June '95, while sales of women's hikers were up 17 % for that month. Bazinet also attributed elevated sales that shops walked inside the hiking business, departing that business for that specialists.
Some retailers draw a good example concerning the hiking boom of two yrs ago combined with the current extreme sport phenomenon. "Plenty of bigger chains will get a specific percent in the industry while [extreme] sports remain a fad because they are selling cost-point type gear," described Steven Carre, assistant hard goods buyer at Adventure 16, a six-store chain situated in Hillcrest.
"However individuals [true enthusiasts] will say `we need real gear' and may shown up at us. That will help us after a while. What Size Skateboard good for an 3 4 5 6 7 8 9 10 11 12 13 14 year old
…
We invite participants of the eCAADe 2015 conference to propose workshops on their current research. The workshops will be held on the 14th an the 15th of September…
ported to Rhino and "set" in Grasshopper, i trim both surfaces from their rectangular bases so that when sDivide is used it creates and distributes the same number of points on each surface.But heres the problems: a) if i use the "trimmed" surfaces with SrfGrid it errors warning: "A point in the grid is null. fitting operation aborted".I'd learned this was caused by "nulls" replacing position Data Items when the rectangular grid(surface base) was trimmed away. So i used Clean Tree which worked removing all nulls, then Shift Paths\Flip Matrix to create line-endpoint pairs for Polyline\Evaluate Curve. I Flattened the last Flip Matrix placing all data items in one source for SrfGrid, like in the working Untrim\CopyTrim definition.This time,.b) SrfGrid errored with: "The UCount value is not valid for this amount of points",.So, i substituted a 356 value, numeric Slider in the Addition B param., and tested its range until a valid UCount was found. Then SrfGrid fitted a surface thru the points, BUT,d) those SrfGrid surfaces are extremely deformed even thought the points preceding it from Evaluate Curve are accurate,SEE: def: "3b-RGH_SurfaceBlend.gh",AND,.a2) if i use Untrim with CopyTrim then SrfGrid works, but since the Jokers limbs WILL be in different surface positions then the blends between the Arm (for example) will rise from its relative FLAT position on the untrimmed Source surface to the Arm on the Target surface, rather than morphing from the Corresponding Arm position on the Source surface,. ..see def.: "4-RGH_SurfaceBlend.gh"So please let me know,..1) how to produce accurate surfaces from SrfGrid in def.: "3b-RGH_SurfaceBlend.gh",. ..(NOTE: BOTH these def's contain 2 indentical, "internalized" surfaces, but if def. 3b can be made to work it will also work with Dis-similar surfaces)2) which component to use or how else to determine the correct UCount value for a specified amount of points(ie:155), re: SrfGrid error: "The UCount value is not valid for this amount of points",.3) how else to force SrfGrid to work with Trimmed surfaces?, AND,..4) how to force intersurface, point-blend correspondence lines: Polylines(PLine) to be connected between correctly! correponding positions (Limbs) on the surfaces?,
Really! appreciate all help, definitions and kind generosity common to this knowledgable membership,
Cheers!,
Jeff…
rce of power.
A fortified emplacement for heavy guns.
Synonyms
accumulator
And use component:
com·po·nent
/kəmˈpōnənt/
Noun
A part or element of a larger whole, esp. a part of a machine or vehicle.
Adjective
Constituting part of a larger whole; constituent.
Synonyms
noun.
constituent - element - ingredient - part
adjective.
constituent - constitutive
…
n to finding a concave contour polyline (which is in general what you need). In your case each contour section contains a series of points of which you do not know the order and you need to sort them so that by connecting them you find the contour. This is fairly easy to do when the contour is convex (basically you find the average point then calculate the vectors from the average to the points and sort the vectors by angle - sorting the points by the same angle gives you the right order for the contour), but generally impossible to find uniquely when the contour is concave (PS: convex means that, for ANY 2 points inside the figure, a straight line connecting them doesn't intersect with the border curve - i.e. circles, ellipses, rectangles, triangles - concave shapes are a star, a crescent moon, an arrow, a boomerang, etc.).
The problem goes like this: given a generic list of points:
Each of these configurations for a perimeter equally fits the above:
Laurent already went for another possible solution, the stochastic approach (by subdividing the connecting lines), I slightly adjusted a few things over his solution:
namely, I added a rounding option to adjust for some weird tolerance issues (some points that should be at Y=80 were at Y=79.99998 or something) and a more straightforward solution to group them by section plane using sets logic. This, coupled with alpha shape, gives a quite good approach, still very coarse in terms of results but that depends on the sampling resolution of the field (i.e. number of height sections in which you calculate the metaballs) and sampling length of the connecting lines.
Definition attached.…
Diffraction , I left it, how it is.
For the unusual issues that comes in the image source component, so, is it something strange? But, I still have the same issues when I sets any integer component (single or multiple) in the “reflection order” of the image source component, in the “image source order” in the ray tracing component, and again, when I connect the output “Direct sound data” of Direct Sound component in the Energy Time Curve.
Do I wrong something with the integer component? I used it already in the first parts, for sets “grasshopper layers”, in the “Scene” component, but here it works. Should I start with a new file?
For the multi-object optimization, thank you for all suggestions. Yes, I red PHD thesis work of Tomas Mendez and the article “ EDT, C80 and G Driven Auditorium design” and still others. Thank you to all these articles, I decided where to focus my thesis.
I understand the potential of Multi-object optimization, and problems that I can finding without using it. Actually, in the beginning of my thesis, I tried to jet in contact with the Politecnico di Torino, but was not easy because I’m not a Politecnico student.
Here, in University of Florence (Building engineering), there isn’t a department or someone that is already familiar with these field of study, so, as you can image, for design my thesis, I can confide on online resources. So far, my Professor suggest me to begin with a Nonlinear Global optimization like Galapagos, and only after see the multi-object. In this way, step by step if something doesn’t work is easier to understand way and where something is going wrong: if are problems due to the setting of the programs, because we are not practical about these, or if there is a wrong in the simulations or in the algorithm and ect.
Do you think is a good way for go on?
Thank you very much,
Kind Regards
Giulia
…
ails.
Some word about the mesh... (see Image_01)
I took a flat 4 points NURBS surface as imput (very easy, it defines the total area of my pavilion) and some points (that defines the contact with the ground).
Then I extracted a grid of points from the NURBS (Surface_Util_Divide surface) and compared 'em with the contol points, in order to associate to each grid's point its own attractor (Vector_Point_Closest Point).
Than I moved the points down. I used the distance from each point to its attractor (inverted) as amplitude for the vector of the movement, in order to say: the nearer you are to the control point, the more intense your movement will be. During this operation I've passed the distances' data list into a graph mapper (Params_Special_Graph Mapper), in order to regulate in a very intuitive and interactive way the shaping of my canopy.
At the end of the process I asked GH for a simple Delaunay mesh (Mesh_Triangulation_Delaunay Mesh). It's a very cool command, I believe!!!
Ok, now some word about the component, it's design and it's repetition/adaptation to the mesh...
(see Image_02)
I took the mesh and extracted components on first and faces's information on second. Then I selected and separated the vertexes (1°, 2°, 3°) of each triangular face into threee well defined list.
Then I re-created the triangles' edges. Please pay attention because it's not the same if you use output information from Delaunay components, because here we need a justapposition of edges where triangles touches each others.
After this work I joined the edges and found their centroid. At the same time I found the mid point of each edge.
Now the component... (see Image_03)
It' a little bit longer to describe: I'll try to be synthetic.
Substantially it is a loft from a curve to a point, repeated three times for each triangle (Surface_Freeform_Extrude Point). The point is an elevation of the centroid of the triangle (you can choose if the exstrusion has a single height or it's related to an attractor. In my case it was fixed). The curve is combination of things. There's an arch, which starts on the edge (there's an offset from the corner) end terminates on the same edge (on the other side, obviously). While it's generation the arch passes through a third point which belong to another segment. This last connects the mid point of the original edge (base triangle) with the centroid. The result is a kind of polyline, with two segments and an arch. If you go back to the image of the component that I posted probably you'll understand what I'm saying better than with the definition.
The posit…