ike using something like the Z vector, but technically you can use any vector you want. This vector will actually determine the static rotatation of all the planes, so you can control that here if you like. One important thing that I've noticed is that the closer the vector is to the plane of the curve or if its too similar to one of the tangent vectors, the more likely you'll have "flipping"
2) Take the cross product between the tangent and the static vector. This will be your first perpendicular vector, which you can use for the X component of the plane.
3) Take the cross product between the tangent and the result of the previous cross product. Use this result as the Y component of the plane. All three components (X, Y, and Z (which is the tangent vector)) are all perpendicular to each other now.
After you've done that you should have planes that decrease twisting. If your curve is not planar, then there will always be some twisting in the frames, but it will be minimal enough to use them effectively.
There also may be "flipping" within the frames, which means one (or both) of two things. First, you could have planes that have reversed their vectors, so the X vector is properly oriented, but pointing down when it should be pointing up. Second, the X and Y vectors could have potentially swapped, so that Y "should" be X and X "should" be Y. In order to check these things, you'll need to do a few tests. The first one is find out whether the vector (X or Y) of the plane your testing is pointing in the opposite direction of previous vector. The second test is to find out whether the vector (X or Y) of the plane your testing is perpendicular to the previous vector. In both cases, an angle test between the two vectors will be able to tell you what you need to know, but you will likely NEVER get exactly 180 for an opposite test or 90 for a perpendicular test. That means that you have to choose a range with which to determine that a given vector is opposite or perpendicular.
You should start testing the X vector to see if anything is wrong. If you find that the X vector is fine, then just move on because Rhino will only allow you to create right handed planes, and the Z vector (the tangent) will always be the same.
I don't believe that there's a native function within the old dotNET SDK for calculating angles, so use the example at the link below. It basically takes the arcCosine of the Dot Product of the two vectors your testing to return the angle in Radians. I'm not sure if this function is included in RhinoCommon or not....
http://wiki.mcneel.com/developer/sdksamples/anglebetweenvectors…
ed when membrane cones are invited to the party (then mesh (via Starling is the best way) the brep and send data to Kangaroo : the easiest thing to do). But patch doesn't trim the inner Loops and ... well initially I thought to find this in SDK and do the job:
Well... I confess that I can't get the gist of the Brep.Trim (as explained in SDK).
Thus go to plan B: having already the closed breps (the "cones") as cutters ... attempt a Boolean difference
but this does that (this looks to me a bit paranoid, but some reason must exist):
What I want is this:
the code that mess things is (open the script inside definition attached):
BTW: where in SDK is that DeBrep thing?
BTW: Delaunay GH syntax is still cryptic to me (but this is not an issue anymore)
I would greatly appreciate any help on that final step (to greatness).
The full working definition soon (v5: with 90% of components replaced by C# stuff).
best, Peter
…
bout angle since the exact same wires can suddenly start working fine later! Just adding new items to Rhino and then using undo to get back to your failing geometry will fix it sometimes?! Flipping the pair of curves' directions, either one or both, fixes it. It's just black box broken. It happens for really boring angles near 90 degrees.
Rotating the entire pair in space has no effect.
Rescaling the lines from their joint point has no effect.
Simply cutting and pasting the lines out of Rhino back in *sometimes* fixes it, so it's angle and something else that makes certain lines "toxic."
Duplicating the pair of failed lines via alt-dragging the Rhino gumball fails to fix it.
Running the "line-like curves" through a Line component to give "lines" doesn't fix it.
Re-creating the lines by extracting endpoints fails to fix it.
Each line, if separated from each other works fine.
Grafting makes each line into its own little cylinder minus a hub.
The error is the boilerplate "Object reference not set to an instance of an object."
Once the pair spontaneously starts working I cannot reproduce the error with that pair again, though sometimes Rhino undo will get me back to failing.
CAN ANYBODY REPRODUCE THIS WITH MY FILE? If so I can submit a bug report.
Exoskeleton is here: http://www.grasshopper3d.com/group/exoskeleton
Source code is here but it's for compiling, not something I can just test in a C# component out of the box:
https://github.com/davestasiuk/Exoskeleton2/commit/f63c4aa691a7f26b...
…
s is like flattening your data PARTIALLY - chopping an index off the end of the branch paths without obliterating the tree entirely. When working with one "set" of input data, a flatten works to get these lists to match up - but when working with multiple sets, we need to be careful to preserve the original branch indices that keep all four of your original regions separate. As a rule, whenever you're feeding two data trees into any component, they should have the same number of branches. (or one should have branches and the other should be a flat list, in other cases).
The rule of thumb I tend to teach is this:
In 90% of cases...
For lists, all your inputs should either have 1 item or N items. That is to say, if you're feeding 4 items into one input and 9 items into another, something is probably wrong.
For trees, all your inputs should have either 1 branch or M branches. That is to say, if you're feeding a tree w/ branches {0;0} to {0;3} into one input, and a tree w branches {0;0;0} to {0;3;8} into the other input, something is probably wrong.
Grasshopper essentially matches up branches first, then lists second. By "matching" I mean it processes them together. Simple example of the Line component - it will match the first branch of points in the A input to the first branch of points in the B input, creating lines between those points, then match the second branches, the third branches, etc. THEN, it applies the same logic to the level of the list (with a pair of matched branches {0;2}, match all the items in those branches to each other - first item in one branch to the first item in the other branch, etc.)
This is a tricky concept but it seems like you're already well on your way to understanding it from your definition - "PShift" is a critical tool in your path management arsenal. I hope this (overly long) response helps clear things up for you!
…
he TOF and TSRF indices. They show, how "distant" is your _PV_SWHsurface from the optimal _PV_SWHsurface surface in terms of tilt and azimuth angles.However, in your case we are not interested in TOF and TSRF indices. We would just like to know what are the _PV_SWHsurface optimal tilt and azimuth angles, regardless of the supplied _PV_SWHsurface.
So the circular surface supplied to the "TOF" component's _PV_SWHsurface input is irrelevant. It can be of any area, and any tilt/azimuth angle.The PV_SWHsurfacesArea output of the "PV SWH system size" component depends on a couple of factors:moduleActiveAreaPercent_ (leave it at 90%).
moduleEfficiency_,
systemSize_.Calculation of systemSize_ depends on your electricity demand, cost of the PV system, type of the object, country, local regulations etc. This is something that an engineer needs to determine.For example, in USA for a residential house in the Sunbelt, depending on finances, a household would try to cover 100% of its annual electricity needs with their PV system. Which means that the systemSize_ you chose needs to cover the annual electricity consumption. You can perform EnergyPlus simulation or use any other way to get the annual electricity consumption.
Ladybug "Photovoltaics Performance" component can calculate the optimal systemSize_ by given the annual electricity consumption.However the component is made to address fixed tilt and azimuth PV systems only.An approximate way to overcome this is to calculate the optimal systemSize_ for fixed tilt and azimuth PV system, and then multiply it with the "difference in %s" panel at the very right of the fixed_vs_tracker_PV2.gh file. Again, this is not what Ladybug "Photovoltaics Performance" component is made to do, but it will probably get you in a ball park.
Inputted 32 degrees for north_ direction is actually 328 degrees.This is due to Ladybug Photovoltaics being based on NREL model which uses clockwise angles convention. This convention is also most commonly used in solar radiation analysis.
Dubai weather data files are uploaded in here.
…
y in English. ○Presenter
Robert (Bob) McNeel (McNeel & Associates founder) Robert (Bob) McNeel is the founder and president of Robert McNeel & Associates (RMA). Founded in 1978, RMA originally focused on developing accounting software for accounting, architecture, engineering, and other personal services firms. Within a few years, RMA expanded its services to include selling and supporting microprocessor-based engineering and design software including AutoCAD. By 1985, the main focus of the business had shifted to AutoCAD sales, service, training, and software development. Bob McNeel grew up in the mountains of southern Washington State on a subsistence dairy farm. To pay for college, he worked in construction as a carpenter, welder, and cement finisher. Bob has a BA in Accounting from Washington State University. Prior to founding McNeel & Associates, he was a practicing Certified Public Accountant and the comptroller for a large construction company in Spokane. Andrés González (Rhino Fablab director) Andrés is a software trainer and developer since the 1980s. He has developed applications for diverse design markets as well as training materials for different CAD and Design software including the community of training materialswww.Rhino3D.TV Andrés has been working with the Rhino Team since the very early stages. He is now the head of the McNeel Southeast US & Latin American Division. He is the worldwide director of the digital fabrication community called RhinoFabLabwww.RhinoFabLab.com as well as the Generative Jewelry & Fashion Design community GJD3D www.GJD3d.com and Generative Furniture Design community GFD3D www.GFD3d.com 1981 -1985 University of North Carolina at Charlotte N.C. - EE.UU. B.S., Bachelor of Science in Engineering
…
Added by Yusuke Oono at 9:28pm on October 16, 2013
ich is the following :
"in a box", i would like to create structure made by wooden blades that follow floor, wall and ceiling, but moving from this support due to "curves" which are the most important variables.
Here is my "logic". You will find enclosed to this post my files as well.
In bold what i'm unable to do by myself (i guess) :
Take the square of 25 m x 12 m ; make it a surface
I divide it in "blades" of 20 cm
I take the edges of the "blades"
I divide this edges in 40 points (or equivalent) (A)
I identify my curves (curves) which are on the floors
I identify the crosspoint between my edge-blade and the curves (B)
I have to test the difference between X Y Z of each A and B.
I have to test which B point is the closest of each A
Each A points which is close to B (Distance < 40 cm) must be on the floor
I have to input a math formula in order to représent the movement of A points regarding their distance to B (example : A1 Z = Distance between A1 and B / 2)
If there are 2+ B, that mean that i have "to do something" to get a correct movement. I mean
2 consecutives points must be on the same "plan"
2 height difference between each point must be 0 or a dedicated value
Regarding Ceiling, it is a duplication of the floor but there is coef to apply with Z distance.
2 parallele points on a define axis, example : X, and consecutive can't have more than 20cm of difference
When all points have moves regarding "parameters" and "curves"; i have to do curve linking all the point of a same "line".
After that i duplicate this curve to a upper curve.
Loft
Extrude surface and then, it's done ?
To be clear, i miss the part where i need to make my points move regarding variables...
I'm sorry, RHI Grasshopper projet.3dm does not represent the "need" to have to consecutive point on the same plan
…
orking in Grasshoper v0.9.00xx (I tried, 9.0010 and 9.0014)
If I try this code
------------------------------------------------------------------------------
System.Globalization.CultureInfo oldCI = new System.Globalization.CultureInfo("en-US");
Object objExcel;
objExcel = System.Runtime.InteropServices.Marshal.GetActiveObject("Excel.Application");
objExcel.Cells(2, 1).Value = "titleA";
------------------------------------------------------------------------------
I see, the message
" Error: 'object' does not contain a definition for 'Worksheets' (line 95) "
Line 95 is the last one < objExcel.Cells(2, 1).Value = "titleA"; >
I've also tried,
Microsoft.Office.Interop.Excel.Application xlApp;xlApp = (Microsoft.Office.Interop.Excel.Application) System.Runtime.InteropServices.Marshal.GetActiveObject("Excel.Application");
But GH C# says
Error: The type or namespace name 'Office' does not exist in the namespace 'Microsoft' (are you missing an assembly reference?) (line 89)
What did I wrong??
…
mers considering extreme sports reject mainstream retailers and like to check out small stores rather of at chains plus malls. Several smaller retailers discuss trends in sports shoe sales. http://skateszone.com/
Though athletic shoes and sports stores and from doorways retailers have reported somewhat uptick in footwear sales due to the increase in extreme sports, the particular beneficiaries inside the trend are independent surf and skate niche stores.
Some West Coast surf and skate shops stated teenagers and even more youthful Generation Xers are not only rejecting traditional sports, but they're also shunning mainstream retailers and malls meant for smaller niche shops transporting hard-to-come-by brands.
Eddie Miyoshi, district manager at Atomic Garage, a 3-store chain situated in Gardena, Calif., stated the soaring recognition of skateboard footwear has boosted the retailer's total footwear business 20-thirty percent this year, rather of '95.
Skate footwear presently represent 80-90 % of Atomic Garage's shoe sales, while couple of years back, Dr. Martens and Timberland drove the retailer's footwear business.
Like many retailers, Miyoshi pointed to Airwalk since the trend's catalyst.
However, if Airwalk broadened its distribution to larger chains, which are frequently located in malls, only a few skate shoe customers adopted. Rather, many youthful males have switched for your skate shops for additional elusive brands like Etnies, Duffs, and Electricity Footwear by Circus. By refusing to market bigger retailers or sports stores, these brands are increasing their cachet among youthful consumers.
"Kids don't want stuff which have been within the shops,In . Miyoshi added.
Searching ahead, Miyoshi forecasted skate shoe sales will remain strong through spring '97 provided "the [hot] vendors don't auction other [non-particularly shop] retailers."
"Skaters and non-skaters are rebelling against mainstream retailers so on to surf and skate shops for many looks," echoed Mark Richards, co-online sources Val Surf, a 3-store chain situated in North Hollywood, Calif. Soaring sales of skate footwear have driven total footwear receipts up 25 percent this year rather of '95.
"The quantity of that increase might be connected while using exposure of maximum games? I am unsure. [Skate footwear] may also be actually the think about the moment,In . Richards acknowledged. And in relation to getting this right look, youthful customers can be very picky.
"Skateboard footwear is a huge category for people, but we're not able to own the brands, Etnies, Duffs, Electricity and Nice, simply because they won't sell us," stated Mark Anderson, buyer at Chick's Sports, a six-store chain in Covina, Calif. "We have people coming every single day requesting them." Consequently, skate footwear have consistently ongoing to obtain about 5 % of Chick's overall footwear business. http://skateszone.com/the-top-8-best-skateboards-for-beginners-reviews-2017/
Nonetheless, some outdoors, niche sports and sports retailers are noting the growing recognition and coverage of maximum sports will receive a modest impact on footwear sales. Trailrunning footwear and approach/outdoors crosstrainers will be the two groups benefiting the very best inside the recognition. Like the skate shoe business, some retailers realize that styling instead of function frequently drives sales of individuals footwear.
"At this time the merchandise is a lot more visual than function," stated Chet James, gm of Super Jock 'N Jill, Dallas, speaking about trailrunning footwear. Still, James noted the current hype over adventure sports helps draw more customer traffic. "The marketing campaigns and media help bring growing figures of people in, nonetheless they frequently occasions day an issue that increases results on their own account,Inch he conceded.
John Wilkinson, executive vp inside the 85-store chain Track 'N Trail, Eldorado Hillsides, Calif., stated the shop has "seen some activity in approach footwear," but he requested the amount of consumers depend in it commercially sport. And, instead of accelerating total footwear business, Wilkinson speculated elevated sales of approach footwear and trailrunners are gnawing away at traditional hiking shoe and boot volume.
But Dan Bazinet, president of Overland Exchanging, a 34-store chain situated in Westford, Mass., believes the company-new looks have breathed existence for the wilting hiking boot category. "[Approach-type footwear] don't represent the lion's participate the hiking market, nonetheless they have elevated the hiking business and provided us extra sales," Bazinet stated.
He designated Timberland's Treeline Series and Rockport's Leadville line as strong performers. Unsurprisingly, he noted the company-new looks are attractive to youthful consumer base than traditional hikers.
For that month of June, sales of men's hikers were up 49 percent at Overland, rather of June '95, while sales of women's hikers were up 17 % for that month. Bazinet also attributed elevated sales that shops walked inside the hiking business, departing that business for that specialists.
Some retailers draw a good example concerning the hiking boom of two yrs ago combined with the current extreme sport phenomenon. "Plenty of bigger chains will get a specific percent in the industry while [extreme] sports remain a fad because they are selling cost-point type gear," described Steven Carre, assistant hard goods buyer at Adventure 16, a six-store chain situated in Hillcrest.
"However individuals [true enthusiasts] will say `we need real gear' and may shown up at us. That will help us after a while. What Size Skateboard good for an 3 4 5 6 7 8 9 10 11 12 13 14 year old
…