onsidered period.
Even if the end of July for the mediterranean climate is not the best period to perform an adaptive comfort analysis (it's just a pretest to define a LB model) I want to refine the Adaptive comfort Chart (AC) by changing the external air temperature data imported from the .epw file with that of monitored data as reported here below:
Where the monitored ext air temperature are in this form (green panel below):
I have used the comfortPar component to set the following parameters:
Adaptive chart as defined by EN 15251
90% of occupants comfortable
the prevailing outdoor temperature from a weighted running mean of the last week
fully conditioned space (even if it is not properly in line with AC as already discussed)
The question is this: the AC component could correctly apply the code below if there is only a list of external temperature data for a restricted period (without indication about the limits of this period) and not for an entire year?
else: #Calculate a running mean temperature. alpha = 0.8 divisor = 1 + alpha + math.pow(alpha,2) + math.pow(alpha,3) + math.pow(alpha,4) + math.pow(alpha,5) dividend = (sum(_prevailingOutdoorTemp[-24:-1] + [_prevailingOutdoorTemp[-1]])/24) + (alpha*(sum(_prevailingOutdoorTemp[-48:-24])/24)) + (math.pow(alpha,2)*(sum(_prevailingOutdoorTemp[-72:-48])/24)) + (math.pow(alpha,3)*(sum(_prevailingOutdoorTemp[-96:-72])/24)) + (math.pow(alpha,4)*(sum(_prevailingOutdoorTemp[-120:-96])/24)) + (math.pow(alpha,5)*(sum(_prevailingOutdoorTemp[-144:-120])/24)) startingTemp = dividend/divisor if startingTemp < 10: coldTimes.append(0) outdoorTemp = _prevailingOutdoorTemp[7:] startingMean = sum(outdoorTemp[:24])/24 dailyRunMeans = [startingTemp] dailyMeans = [startingMean] prevailTemp.extend(duplicateData([startingTemp], 24)) startHour = 24
…
tema della modellazione parametrica con Grasshopper. Questa plug-in di Rhino consente di progettare, confrontandosi con un contesto evolutivo, attraverso la comprensione e l'utilizzo di parametri e componenti che influenzano la rappresentazione e la rendono dinamica componendo algoritmi. Nel corso verranno introdotte le nozioni base di Grasshopper approfondendo le metodologie della progettazione parametrica e le tecniche di modellazione algoritmica per la generazione di forme complesse.
Le informazioni teoriche saranno fornite in maniera accelerata ma organica e contestuale agli argomenti elencati. Per massimizzare i risultati, le lezioni saranno accompagnate da piccole esercitazioni pratiche.Argomenti trattati:- Introduzione alla progettazione parametrica: teoria, esempi, casi studio- Grasshopper: concetti base, logica algoritmica, interfaccia grafica- Nozioni fondamentali: componenti, connessioni, data flow- Funzioni matematiche e logiche, serie, gestione dei dati- Analisi e definizione di curve e superfici- Definizione di griglie e pattern complessi- Trasformazioni geometriche, paneling- Attrattori, image sampler- Data tree: gestione di dati complessiStrutturaIl corso ha una durata di 16 ore programmate nell'arco di 2 giornate con i seguenti orari: i giorni 10/11 e 11/11 dalle 10,00 alle 19,00 con pausa pranzo di un'ora.
PrerequisitiPer affrontare il corso è richiesta una conoscenza di base del software Rhino attraverso esperienze teoriche e pratiche. I partecipanti dovranno venire muniti di proprio laptop e con software Rhinoceros 5 o Rhinocero 4 perfettamente funzionanti.Alla fine del corso, verrà rilasciato l’attestato di partecipazione ad un corso qualificato certificato dalla McNeel, valido anche per l’ottenimento di crediti formativi universitari.
…
, presso la sede Manens-Tifs, nei giorni 26,27 e 28 maggio 2016.
Il comfort visivo e la gestione dell’illuminazione naturale in relazione al risparmio energetico diventano sempre più rilevanti per una progettazione innovativa degli edifici. Ad esempio, il nuovo protocollo LEED 4 riconosce crediti per le simulazioni di daylighting e conferma l’importanza degli aspetti progettuali per “collegare gli occupanti con lo spazio esterno, rinforzare i ritmi circadiani, ridurre i consumi di energia elettrica per l’illuminazione artificiale con l’introduzione della luce naturale negli spazi”. Senza strumenti software per la simulazione della luce non è possibile ottenere risultati di qualità. Radiance è un software validato, utilizzato sia a livello di ricerca che dai progettisti ed è tra i più accurati per la simulazione professionale della luce naturale e artificiale. Non ha limiti di complessità geometrica ed è adatto a essere integrato in altri software di calcolo e interfacce grafiche. Queste ultime facilitano le procedure di programmazione. Le principali e più versatili saranno oggetto del corso (DIVA4Rhino e Ladybug+ Honeybee, plug-in per Grasshopper e Rhinoceros 3D).
Il corso è rivolto a progettisti e ricercatori che vogliano acquisire strumenti pratici per la simulazione con Radiance al fine di mettere a punto e verificare le soluzioni più adatte alle proprie esigenze. Sono previste lezioni di teoria e pratica con esempi ed esercitazioni volte a coprire in modo dimostrativo ed interattivo i concetti trattati.
Le domande di iscrizione devono essere presentate entro il 12 maggio 2016.
La brochure con i contenuti del corso e tutte le informazioni sono disponibili su questo link
Il corso è sponsorizzato da Pellinindustrie.…
la plug-in Grasshopper. L'utilizzo dei due software permette di esprimere al massimo le qualità e le potenzialità della modellazione Nurbs e Mesh attraverso l'esplicitazione di algoritmi compositivi. Il corso introdurrà alle strategie di disegno digitale finalizzate alla progettazione di forme complesse utilizzando un caso studio proprio del mondo dell’architettura. Si affronterà l'intero processo di modellazione, partendo dal disegno di una superficie complessa; su questa verranno applicati algoritmi generativi per la tassellazione e la riduzione della complessità in elementi ottimizzati per la produzione. Una delle finalità del corso è quindi l’ideazione di superfici complesse, approfondendo metodi di fabbricazione digitale.
Il metodo del corso è basato sulla risoluzione di un esercizio step-by-step accompagnato da approfondimenti teorici che porteranno il partecipante all'autonomia nell'utilizzo di Rhinoceros e Grasshopper. Durante il percorso verranno illustrati applicativi avanzati del software per la pannellizzazione delle superfici (Paneling-Tools). Con il processo illustrato nel corso si vuole rendere il lavoro del progettista più facile grazie alla riduzione dei tempi che portano dal disegno dell’idea, alla costruzione delle forme.
Nella prima parte del corso verranno illustrati metodi avanzati di generazione delle superdici per una modellazione controllata delle FREE FORM. per arrivare a questa condizione sarà necessario approfondire i concetti di spazio parametrico monodimensionale (per la trasformazione lungo le curve) e spazio parametrico bidimensionale (per la trasformazione lungo le superfici).
Nella seconda parte del corso si insegneranno i metodi di esplicitazione degli algoritmi, applicati ad esercizi base utili alla comprensione di Grasshopper; poi la plug-in verrà specializzata affrontando editing, trasformazioni complesse e il problema della tassellazione delle superfici.Buona parte del tempo sarà dedicato alla costruzione di geometrie responsive e alla gestione del flusso dati per l'ottimizzazione del lavoro.…
ucation Research Group in Urban Building Services at the Technical School of Architecture of Madrid (ETSAM), Spain.
The aim of the Research is to generate a digital support for sketching urban and architecture net systems and its interrelationships between them for academic researches.
IE Group Members:
-Sergio del Castillo Tello (Doctor No, Lead Programmer)
-Pablo Gómez Rodríguez (Programmer)
-Prof. Miguel Angel Gálvez
(Architect ETSAM, Building Services Department)
-Manuel Rodríguez Pérez
(Architect ETSAM, Building Services Department)
-Prof. Jose Tovar Larrucea
(Architect ETSAM, Building Services Department, Professor Ad Honorem)
The development of this tools, which are in its very early stage, is planned to take part within the Innovative Group Education research program; We expect to share the results with the community through this group as we achieve them, in case that some of you are interested, or if just want to get involved somehow. Cheers!
…
Added by Doctor No at 4:24am on September 30, 2013
rk for Rhino, this is a first go at a very simple tool to get an idea of how fast different computers are at performing the sort of calculations used in Kangaroo, with the aim of informing those buying or upgrading their machines.
If you could take a couple of minutes to download and run this definition (after closing other running applications), then post here the result and your PC specs, hopefully we can start building a basic picture of what effect different hardware really has on the speed Kangaroo runs.
Most of the information can be found in the System page of Control Panel.
RAM speed can be checked in your BIOS, or with a tool like CPU-Z (note that the reported frequency from this should be doubled to get the actual RAM speed rating - eg if the frequency is 800MHz you should write DDR3-1600. It's confusing I know - see some discussion of this here), or by searching online for the specs of your PC model number.
This definition is purely testing the speed of the internal physics calculation, not display, so graphics-cards are irrelevant.
For now this is just to get a single general measure of overall Kangaroo speed, but it might also be interesting later to run a variety of tests to see how the speed varies with the size and complexity of simulation.
Of course a way of benchmarking general Grasshopper performance would be very nice to have as well, but would involve a lot more variables, and I'd be interested if anyone has ideas about how that could work.
Note - I posted a couple of versions of this earlier with various errors that were causing incorrect results. If you downloaded the earlier KangaMark01.gh or KangaMark02.gh file, please disregard that and any results from it and use the one posted here below:…
this common installation problem please find a tested remedy shared by one of the group members:
Comment by Iman Sheikhansari on August 26, 2019 at 8:33amDelete Comment
HiIf you are encountering a problem with rhino 6 versions don't worryFollow these steps.1. Download SYNTACTIC from https://sites.google.com/site/pirouznourian/syntactic-design2. Install it and go to the installation folder, Drag & drop SYNTACTIC(green one) over your grasshopper canvas.3. Close your rhino and reopen it. 4. Type GrasshopperDeveloperSettings5. Tick the Memory load *.GHA assemblies using COFF byte arrays option6. Run grasshopper and enjoy plugin
I hope this helps,
Best regards,
Pirouz
…
thing that MicroStation does (or doesn't). The eternal debate between us is that they focus to the so called BIM aspect of things (and obviously on interoperability matters - that said IFC2*4 is" implemented" in certain Bentley verticals like BA and others) whilst I'm after assembly/component puzzles (and on that matter ... MS ...hmm... to put it politely is not exactly CATIA and/or NX, he he).
On the other hand this paranoid obsession with Level/Layer driven CAD (I hate it) defines a red thick line between CAD and MCAD - because the most intelligent importer can't emulate the way that Siemens NX/CATIA classifies objects - and without control power means nothing.
On the other hand Microstation V9 (...soon) has interesting scripting capabilities (think Modo rather Generative Components) ... meaning that Grasshopper could work there in a rather nice way. I think that I must talk for that to Ray (he recently ditched the ancient legacy MS render engine in favor for the Luxology/Nexus engine). Ray still is negative to buy Act3D mind (hope that you know the mother of visual scripting - the Quest3D VR thing).
On the other hand - within the broad AEC aspect - things these days are different (especially in fast developing countries the likes of UAE, Saudi Arabia, certain ex USSR "democracies" etc etc). Studies are outsourced even at Preliminary Design stage to various sub-contractors (they undertake the Study completion per discipline as well). This means that N separate groups doing M aspects of the whole ... meaning entropy^(N*M) - that's chaos in plain English.
With this in mind I'm quite (a lot) skeptical about the practical meaning of the whole exchange thing in AEC - at least with regard the countries mentioned (not to mention that several portions of a modern AEC thing are made via MCAD apps - chaos^chaos.
I'll back with more focused issues on that matter.
But the big question is: Grasshopper of Generative Components? Well...let's talk serious SS bikes instead: think a Ducati 1198 and a BMW S1000RR (I have them both): which is "best"? The thing is that not always the best bunny is the fasted bunny and not always the fasted bunny is the best bunny.
Cheers,
Peter
…
ty to work in a new and exciting space, where design, art, technology and fashion meet.
If you guys are looking for a full- or part-time job, or know an expert who is - we're happy to with meet him/her. We're located in the Lower East Side, New York.
What the person will be doing:
- Provide technical vision for product and infrastructure features
- Work with Marketing/Product Management to enhance the user experience
- Develop (with our team) our e-commerce customization platform
- Manage our real time 3D modeling platform
- Mentor 3D modelers and developers, define and document development methods, and share best practices
- Review and recommend improvements to product architecture
What we require:
- BA/BS/ BARCH degree OR CS/EE/Engineering degree preferred
- EXTENSIVE 3d modeling, rhino and grasshopper experience
- Experience building online computer games
- Experience creating natural and fractal patterns and forms in 3d
- UV Texture Mapping bit mapping (texture mapping)
- Experience managing a development team in projects with tight SCHEDULES
- Architecture, programing, scripting, Media or Fashion industry experience preferred
- Experience implementing web interfaces using XHTML, CSS, Javascript, and AJAX
- Experience in recommendation engines and algorithms
- Interest in working in an early stage fast-paced environment…
try now to integrate Geco in an interdisciplinary architectural engineering studio: hoping we can show you some nice applications of your tool, I'll keep you update and sending now details by e-mail. Here the file (very welcome to be shared). It most probably contais trivial errors by me, thanks for helping and giving some tip! Gr. Michela
FILE:
Ok, right, I see the outputs update correctly. Origin of problems must be in some different mistake I do:
- Incident radiation: I am not sure I understand what is going on: why I get so many 'not a number' ? (The Galapagos report is full of NaNs).
Bio-Diversity: 0.887 Genome[0], Fitness=NaN, Genes [89% · 44%] { Record: Too many fitness values supplied } ...
Genome[7], Fitness=NaN, Genes [74%] { Record: No fitness value was supplied } ....
Genome[9], Fitness=NaN, Genes [37% · 11%] { Record: Genome was mutated to avoid collision Record: Too many fitness values supplied }
- Daylight calculations: the geometry accumulates withouth deleting the previous models. As a consequance, results almost do not change after few varations (so, outputs get updated but do not vary). In current daylight definition: the first object being imported is the one where the grid has to fit; its setting makes it cancelling all the other objects during import. All the others, do not delete anything when imported. When running loops (manual or GA) that vary parameters, the entire geometry do not get cancelled - so I guess the loop does not pass back by the cancelling step, but imports only the geometry which has been varied by the parameters using the setting of that import component only? I will then try again by changing the order of the operations, but if you have specfic tips, let me know.
THANKS!
…