uired information, a poor representation of data evolve misreading messages and by turn ambiguous responses especially with complex data. Inforgraphics are graphic visual representations of information, data or knowledge intended to present complex information quickly and clearly. In the nowadays flow of complex information, Infographics is the key for optimized visual communication. The use of infographics is an important step towards developing a pedagogical approach that draws on visuals where 90% of Information is transmitted to the brain so it is crucial to tickle the optic nerves to get people excited about data. The workshop investigates how computational tools can aid in designing and controlling complex information to be easily understood in addition to improve cognition by utilizing graphics to enhance the human visual system’s ability to see patterns and trends and much more likely to be remembered in today’s fast – paced environment. This workshop investigates multiple computational tools and techniques of developing coefficient visualization of data types including; network, statistical and hierarchal data. The workshop objective is to reconsider visual representation a promising design tool for architects, artists and designers. /// Application To apply, please follow this link to fill the application form https://docs.google.com/forms/d/1HOv6c1_LzhHNJU5n_FLvuhC-Yg75HDfbEcq6TN6mulI/viewform /// Fees 1200 EGP for students / 1500 EGP for graduates and young professionals more info on the workshop webpage: http://www.encodestudio.net/#!infographics/cqvl
POSTS
…
ike using something like the Z vector, but technically you can use any vector you want. This vector will actually determine the static rotatation of all the planes, so you can control that here if you like. One important thing that I've noticed is that the closer the vector is to the plane of the curve or if its too similar to one of the tangent vectors, the more likely you'll have "flipping"
2) Take the cross product between the tangent and the static vector. This will be your first perpendicular vector, which you can use for the X component of the plane.
3) Take the cross product between the tangent and the result of the previous cross product. Use this result as the Y component of the plane. All three components (X, Y, and Z (which is the tangent vector)) are all perpendicular to each other now.
After you've done that you should have planes that decrease twisting. If your curve is not planar, then there will always be some twisting in the frames, but it will be minimal enough to use them effectively.
There also may be "flipping" within the frames, which means one (or both) of two things. First, you could have planes that have reversed their vectors, so the X vector is properly oriented, but pointing down when it should be pointing up. Second, the X and Y vectors could have potentially swapped, so that Y "should" be X and X "should" be Y. In order to check these things, you'll need to do a few tests. The first one is find out whether the vector (X or Y) of the plane your testing is pointing in the opposite direction of previous vector. The second test is to find out whether the vector (X or Y) of the plane your testing is perpendicular to the previous vector. In both cases, an angle test between the two vectors will be able to tell you what you need to know, but you will likely NEVER get exactly 180 for an opposite test or 90 for a perpendicular test. That means that you have to choose a range with which to determine that a given vector is opposite or perpendicular.
You should start testing the X vector to see if anything is wrong. If you find that the X vector is fine, then just move on because Rhino will only allow you to create right handed planes, and the Z vector (the tangent) will always be the same.
I don't believe that there's a native function within the old dotNET SDK for calculating angles, so use the example at the link below. It basically takes the arcCosine of the Dot Product of the two vectors your testing to return the angle in Radians. I'm not sure if this function is included in RhinoCommon or not....
http://wiki.mcneel.com/developer/sdksamples/anglebetweenvectors…
ed when membrane cones are invited to the party (then mesh (via Starling is the best way) the brep and send data to Kangaroo : the easiest thing to do). But patch doesn't trim the inner Loops and ... well initially I thought to find this in SDK and do the job:
Well... I confess that I can't get the gist of the Brep.Trim (as explained in SDK).
Thus go to plan B: having already the closed breps (the "cones") as cutters ... attempt a Boolean difference
but this does that (this looks to me a bit paranoid, but some reason must exist):
What I want is this:
the code that mess things is (open the script inside definition attached):
BTW: where in SDK is that DeBrep thing?
BTW: Delaunay GH syntax is still cryptic to me (but this is not an issue anymore)
I would greatly appreciate any help on that final step (to greatness).
The full working definition soon (v5: with 90% of components replaced by C# stuff).
best, Peter
…
bout angle since the exact same wires can suddenly start working fine later! Just adding new items to Rhino and then using undo to get back to your failing geometry will fix it sometimes?! Flipping the pair of curves' directions, either one or both, fixes it. It's just black box broken. It happens for really boring angles near 90 degrees.
Rotating the entire pair in space has no effect.
Rescaling the lines from their joint point has no effect.
Simply cutting and pasting the lines out of Rhino back in *sometimes* fixes it, so it's angle and something else that makes certain lines "toxic."
Duplicating the pair of failed lines via alt-dragging the Rhino gumball fails to fix it.
Running the "line-like curves" through a Line component to give "lines" doesn't fix it.
Re-creating the lines by extracting endpoints fails to fix it.
Each line, if separated from each other works fine.
Grafting makes each line into its own little cylinder minus a hub.
The error is the boilerplate "Object reference not set to an instance of an object."
Once the pair spontaneously starts working I cannot reproduce the error with that pair again, though sometimes Rhino undo will get me back to failing.
CAN ANYBODY REPRODUCE THIS WITH MY FILE? If so I can submit a bug report.
Exoskeleton is here: http://www.grasshopper3d.com/group/exoskeleton
Source code is here but it's for compiling, not something I can just test in a C# component out of the box:
https://github.com/davestasiuk/Exoskeleton2/commit/f63c4aa691a7f26b...
…
s is like flattening your data PARTIALLY - chopping an index off the end of the branch paths without obliterating the tree entirely. When working with one "set" of input data, a flatten works to get these lists to match up - but when working with multiple sets, we need to be careful to preserve the original branch indices that keep all four of your original regions separate. As a rule, whenever you're feeding two data trees into any component, they should have the same number of branches. (or one should have branches and the other should be a flat list, in other cases).
The rule of thumb I tend to teach is this:
In 90% of cases...
For lists, all your inputs should either have 1 item or N items. That is to say, if you're feeding 4 items into one input and 9 items into another, something is probably wrong.
For trees, all your inputs should have either 1 branch or M branches. That is to say, if you're feeding a tree w/ branches {0;0} to {0;3} into one input, and a tree w branches {0;0;0} to {0;3;8} into the other input, something is probably wrong.
Grasshopper essentially matches up branches first, then lists second. By "matching" I mean it processes them together. Simple example of the Line component - it will match the first branch of points in the A input to the first branch of points in the B input, creating lines between those points, then match the second branches, the third branches, etc. THEN, it applies the same logic to the level of the list (with a pair of matched branches {0;2}, match all the items in those branches to each other - first item in one branch to the first item in the other branch, etc.)
This is a tricky concept but it seems like you're already well on your way to understanding it from your definition - "PShift" is a critical tool in your path management arsenal. I hope this (overly long) response helps clear things up for you!
…
he TOF and TSRF indices. They show, how "distant" is your _PV_SWHsurface from the optimal _PV_SWHsurface surface in terms of tilt and azimuth angles.However, in your case we are not interested in TOF and TSRF indices. We would just like to know what are the _PV_SWHsurface optimal tilt and azimuth angles, regardless of the supplied _PV_SWHsurface.
So the circular surface supplied to the "TOF" component's _PV_SWHsurface input is irrelevant. It can be of any area, and any tilt/azimuth angle.The PV_SWHsurfacesArea output of the "PV SWH system size" component depends on a couple of factors:moduleActiveAreaPercent_ (leave it at 90%).
moduleEfficiency_,
systemSize_.Calculation of systemSize_ depends on your electricity demand, cost of the PV system, type of the object, country, local regulations etc. This is something that an engineer needs to determine.For example, in USA for a residential house in the Sunbelt, depending on finances, a household would try to cover 100% of its annual electricity needs with their PV system. Which means that the systemSize_ you chose needs to cover the annual electricity consumption. You can perform EnergyPlus simulation or use any other way to get the annual electricity consumption.
Ladybug "Photovoltaics Performance" component can calculate the optimal systemSize_ by given the annual electricity consumption.However the component is made to address fixed tilt and azimuth PV systems only.An approximate way to overcome this is to calculate the optimal systemSize_ for fixed tilt and azimuth PV system, and then multiply it with the "difference in %s" panel at the very right of the fixed_vs_tracker_PV2.gh file. Again, this is not what Ladybug "Photovoltaics Performance" component is made to do, but it will probably get you in a ball park.
Inputted 32 degrees for north_ direction is actually 328 degrees.This is due to Ladybug Photovoltaics being based on NREL model which uses clockwise angles convention. This convention is also most commonly used in solar radiation analysis.
Dubai weather data files are uploaded in here.
…
GH, same as using sweep2 command in Rhino.
The one on the right is what I got so far (the output smooth our the kink of the original rails). Basically I am just following the methods provided by sdk sample: http://wiki.mcneel.com/developer/sdksamples/sweep2 .
The following is the function I copy and use directly from the SDK sample. By using this function, I can generate the sweep surface at right. But I want to have is the one in the middle with the kink edges. Can anyone show me how and where to modify he settings? I guess some sweep arguments need to be changed? I have try couples, such m_simplify, m_bSimpleSweep, m_bSameHeight, m_rebuild_count... but still cannot find a right combination for this function to output the sweep surface I want. Any suggestions or helps are very appreciated. Thanks for your help and time on this.
'Sweep2 function'----------------
Sub Sweep2( ByVal Rail1 As IOnCurve, _
ByVal Rail2 As IOnCurve, _
ByVal sCurves As List(Of IOnCurve), _
ByRef Sweep2_Breps As List(Of OnBrep))
'Define a new class that contains sweep2 arguments
Dim args As New MArgsRhinoSweep2
'Set the 2 rails
Dim Edge1 As New MRhinoPolyEdge
Dim Edge2 As New MRhinoPolyEdge
Edge1.Append(Rail1.DuplicateCurve())
Edge2.Append(Rail2.DuplicateCurve())
'Add rails to sweep arguments
args.m_rail_curves(0) = Edge1
args.m_rail_curves(1) = Edge2
args.m_bClosed = False
Dim section_curves As New List(Of OnCurve)
'Loop through sections to set parameters
For Each Section As IOnCurve In sCurves
Dim sCurve As OnCurve = Section.DuplicateCurve()
section_curves.Add(sCurve)
Dim t0 As Double = 0
If Not Edge1.GetClosestPoint(sCurve.PointAtStart(), t0) Then
If Not Edge1.GetClosestPoint(sCurve.PointAtEnd(), t0) Then
Dim s As Double = 0
sCurve.GetNormalizedArcLengthPoint(0.5, s)
Edge1.GetClosestPoint(sCurve.PointAt(s), t0)
End If
End If
args.m_rail_params(0).Append(t0)
Dim t1 As Double = 0
If Not Edge2.GetClosestPoint(sCurve.PointAtStart(), t1) Then
If Not Edge2.GetClosestPoint(sCurve.PointAtEnd(), t1) Then
Dim s As Double = 0
sCurve.GetNormalizedArcLengthPoint(0.5, s)
Edge2.GetClosestPoint(sCurve.PointAt(s), t1)
End If
End If
args.m_rail_params(1).Append(t1)
Next
'Set shapes
args.m_shape_curves = section_curves.ToArray
'Set the rest of parameters
args.m_simplify = 0
args.m_bSimpleSweep = False
args.m_bSameHeight = False
args.m_rebuild_count = -1 'Sample point count for rebuilding shapes
args.m_refit_tolerance = RMA.Rhino.RhUtil.RhinoApp.ActiveDoc.AbsoluteTolerance()
args.m_sweep_tolerance = RMA.Rhino.RhUtil.RhinoApp.ActiveDoc.AbsoluteTolerance()
args.m_angle_tolerance = RMA.Rhino.RhUtil.RhinoApp.ActiveDoc.AngleToleranceRadians()
Dim sBreps() As OnBrep = Nothing
If (RhUtil.RhinoSweep2(args, sBreps)) Then
For Each b As OnBrep In sBreps
Sweep2_Breps.Add(b)
Next
End If
Return
End Sub
…
ect + Geco
TUTORS:
Arturo Tedeschi (Authorized Rhino Trainer) + Maurizio Arturo Degni
Il workshop avanzato ECOLOGIC PATTERNS affronta l’impiego di strategie parametriche all’interno del processo progettuale, approfondendo l’utilizzo di Grasshopper in sinergia con plug-in, software di analisi ambientale e simulazione fisica. Obiettivo fondamentale è la generazione della forma come risultato di tecniche di form-finding e di input ambientali (solari, termici e acustici). Verranno acquisiti nuovi strumenti operativi e di simulazione al fine di costruire modelli parametrici ottimizzati in grado di adattarsi a diverse condizioni di contesto.
MORE INFO…
o Common - just like C#. But Rhino Python has a "Scripting Language Wrapper" which breaks commonly used taks down to simpler functions.
Here's a general Example:
Take a look at the code on this website http://wiki.mcneel.com/developer/rhinocommonsamples/addline). Generally it's Rhino Common code in three language to create a line. They look equally difficult.
But if you use Rhino Python Scripting you can use an simplified syntax to get the same result. It's very similar to Rhino Script.
The code would be:
import rhinoscriptsyntax as rsstart_point = rs.GetPoint("Get start point")end_point = rs.GetPoint("Get end point")line_id = rs.AddLine(start_point, end_point)
OK - No Error Tracking here, but still you can see that the syntax is much simpler. (And in the end you just have less lines of code you have to debug.
And the good thing about Rhino Python is, that you can mix these approaches. Once you reach a level where Rhino Python Script doesn't get you there, which by the way happens very rarely, you can still use the Rhino Common methods.
Also, in Python Sycripting 99% of what you probably would like to do is available as a "wrapped" script function.
Rhino Python Script is currently also better documented than Rhino Common for C# and VB.Net. If you have used Rhino VB Script before, these functions will be very familar to you.
I'm not sure, why it's currently a separate plug-in. I belive the reason is that Rhino 4 (which is supported by GH) doesn't support Rhino Python. Also it's currently WIP, so it needed to be updated more frequently than GH itself. In the long run (I believe) it might be integrated into GH as a general component
- Martin
P.S.: To use Rhino Python within GH is a little more tricky than my example - but nothing compared to developing C#
P.S.2 Here's the code with Error Tracking:
import rhinoscriptsyntax as rsdef AddLine(): start_point = rs.GetPoint("Get start point") if start_point is None: print "No start point was selected" return end_point = rs.GetPoint("Get end point") if end_point is None: print "No end point was selected" return line_id = rs.AddLine(start_point, end_point) return line_idAddLine()
…
ve Intermediate Insight of Computational Design Strategies While Exploring Rangoli Art form in 2 Dimension and 3Dimesion in which Participants will not only be trained to Digitally Design using Parametric software's but they will also be trained to Fabricate them in reality.
This Course will be explored in manner where Participants will understand inter-dependency of Rhinoceros3D & Grasshoper3D through a unique Hybrid Teaching Method While Exploring Rangoli Geometry .
The course will also take participants through Topics such as - Computational Thinking, - Computational / Parametric Design, - Computational Rangoli Exploration, - Digital Fabrication, - 3D Visualization ( Rhino3D 6), - Making Info-graphics & Design Diagrams ( Rhino3d 6 ).
Participants will also be doing a Project at the last Leg of Workshop in which they will implement the skill they gained in first Few Weeks.
{ Tutor } Nitant Pixelkar (Computational Artist / Designer, Mumbai)
Nitant Hirlekar A.k.a. Pixelkar, is a Computational Artist. He graduated from Rachana Sansad school of Interior Design 2011, Mumbai. In Academics He Bagged Two Gold and One Silver Medal on National Level.
In his post academic days, he came across the Emerging Computational Techniques in Design industry in which Algorithm serves as a main Functional part. He uses Algorithms to Deconstruct the Captured images in Pixelated form using the Grid of the Desired Indian Art Forms.
He Heads Collective Group Named "Mutation Lab” which is a multidisciplinary Design & Art Cell. Where they Explore Computational Approach while Designing Various Scales Spatial Installation, Digital Fabrication, Interactive Installations and Computational Consultancy for Various Architects.
He has exhibited his first artwork in Kalaghoda Arts Festival for in 2014 And further in 2016 and 2017.In 2015 he exhibited in Dharavi Biennale” organized by Wellcome Trust,London & Sneha Organisation, Mumbai Which was internationally acclaimed. In 2016 he got Featured on a TV show - The Creative Indian's as an Absolut Creative Indian of the Week.
Academically he is been involved in Many Computational Design Workshops / Elective Studios for School of Interior Design (Rachna Sansad), LS Raheja College of Architecture & Rat-Lab (Delhi).
{ Participants } The Course is aimed at Architecture, Interior Design, Product Design,Furniture Design & Fashion Design Students and Professionals. However we would be thrilled to have any Interdisciplinary Artist / Creator/ Maker to join the Course as well.
{ Level }
Intermediate
{ Timing } Monday To Friday - 6:00 PM to 9:00 PM (15 Hours/ Week = 5 Week X 15 Hours = 75 Hours )
{ Dates } Registration Ends - 24th April 2020 **Subejct to Availablity
{ Workshop Dates } 4th May 2020 To 5th June 2020
{ Venue } Lower Parel,Mumbai ( Details To Be Announced )
{ Schedule }
{Registration Form}…