e rod with circular section (no goals allow for controlling torsion for what I know). The rods are set with two options, with straight rest position or the (initial) bent one. The calibration integrated with the model is more about giving a scale between the forces rather than the will to accurately simulate them (at the moment). Anyway, I am trying to do it on a macro scale, instead of a micro, with elements which are rather thin.
The system at the moment is not stable. In fact, besides the rods' characteristics is quite fundamental to keep them planar when they intersect. I am lacking something but also probably missing some parameters. In the script, there are two goals to define this: impose 90° between vertical and horizontal, as well as between these and a normal to their intersection. For my understanding, angle goal works tri-dimensionally without a preferred plane and this (hopefully) should address it.
Just wondering if anyone can give me a hint on this. After this step, it would be great to understand if the system can get out of its plane (through a pull force out of its plane, simulated in the script through point loads in the joints). I am still not entirely sure about the possibility of doing this. By looking at how other auxetic patterns have been used to generate freeform surfaces, I am giving it a try.
Thank you
Claudio
PS: I noticed also this post and this, really interesting. I see the problematic over the stability and the necessity to separate the states with an energetic hill in the first, as well as some potential in using auxetics in the latter.…
opening a simple file with 30 curves being lofted took like 2 minutes to complete and Rhino crashed afterwards saying:"Windows is out of memory and Rhino will close after you click ok."evethough I still had 7GB of free physical memory and my page file is set also to 16 GB just to be shure...I then switched to Rhino 5.0 Version 5 SR14 64-bit (5.14.522.8390, 05/22/2017) which also had big problems to display the lofted surface. It was unresponsive after loading the file for a minute and a half and then it normally displayed the lofted surface. Every move of camera takes at least 10 seconds to update, but at least it runs. GH profiler says the loft took only 12 ms (90%).
So I'm suspected my graphics card, because the Windows are just three weeks from a clean install. I've also updated my Graphics Driver from the stock Windows one to Intel HD one, but nothing changed.Is there something I'm missing??? What can I try next?My specs:CPU: i5-3320M @ 2.60 GHzRAM: 16 GBGPU: Intel HD Graphics 4000, driver: 07.04. 2017, version 10.18.10.4653
…
Added by Šimon Prokop at 10:39am on October 21, 2017
rce of power.
A fortified emplacement for heavy guns.
Synonyms
accumulator
And use component:
com·po·nent
/kəmˈpōnənt/
Noun
A part or element of a larger whole, esp. a part of a machine or vehicle.
Adjective
Constituting part of a larger whole; constituent.
Synonyms
noun.
constituent - element - ingredient - part
adjective.
constituent - constitutive
…
n to finding a concave contour polyline (which is in general what you need). In your case each contour section contains a series of points of which you do not know the order and you need to sort them so that by connecting them you find the contour. This is fairly easy to do when the contour is convex (basically you find the average point then calculate the vectors from the average to the points and sort the vectors by angle - sorting the points by the same angle gives you the right order for the contour), but generally impossible to find uniquely when the contour is concave (PS: convex means that, for ANY 2 points inside the figure, a straight line connecting them doesn't intersect with the border curve - i.e. circles, ellipses, rectangles, triangles - concave shapes are a star, a crescent moon, an arrow, a boomerang, etc.).
The problem goes like this: given a generic list of points:
Each of these configurations for a perimeter equally fits the above:
Laurent already went for another possible solution, the stochastic approach (by subdividing the connecting lines), I slightly adjusted a few things over his solution:
namely, I added a rounding option to adjust for some weird tolerance issues (some points that should be at Y=80 were at Y=79.99998 or something) and a more straightforward solution to group them by section plane using sets logic. This, coupled with alpha shape, gives a quite good approach, still very coarse in terms of results but that depends on the sampling resolution of the field (i.e. number of height sections in which you calculate the metaballs) and sampling length of the connecting lines.
Definition attached.…
Diffraction , I left it, how it is.
For the unusual issues that comes in the image source component, so, is it something strange? But, I still have the same issues when I sets any integer component (single or multiple) in the “reflection order” of the image source component, in the “image source order” in the ray tracing component, and again, when I connect the output “Direct sound data” of Direct Sound component in the Energy Time Curve.
Do I wrong something with the integer component? I used it already in the first parts, for sets “grasshopper layers”, in the “Scene” component, but here it works. Should I start with a new file?
For the multi-object optimization, thank you for all suggestions. Yes, I red PHD thesis work of Tomas Mendez and the article “ EDT, C80 and G Driven Auditorium design” and still others. Thank you to all these articles, I decided where to focus my thesis.
I understand the potential of Multi-object optimization, and problems that I can finding without using it. Actually, in the beginning of my thesis, I tried to jet in contact with the Politecnico di Torino, but was not easy because I’m not a Politecnico student.
Here, in University of Florence (Building engineering), there isn’t a department or someone that is already familiar with these field of study, so, as you can image, for design my thesis, I can confide on online resources. So far, my Professor suggest me to begin with a Nonlinear Global optimization like Galapagos, and only after see the multi-object. In this way, step by step if something doesn’t work is easier to understand way and where something is going wrong: if are problems due to the setting of the programs, because we are not practical about these, or if there is a wrong in the simulations or in the algorithm and ect.
Do you think is a good way for go on?
Thank you very much,
Kind Regards
Giulia
…
connected hyperspace where architecture can be fluid, flexible and vivid, yet the aspect of materiality requires more attention.
Action-designed structures begin to move beyond the utopian proposals of the 20th century’s manifestos and hold a place in the world of realized designs. The AA Athens Visiting School aims to bring users closer to the built environment while revisiting habits of designing, building and experiencing space through materiality. Understanding materiality and form as a ‘unified whole’, the programme integrates manufacturing techniques through the experimentation fabrication of prototypes at a 1:1 scale.
Prominent Features of the workshop/ skills developed
Participants become part of an active learning environment where the large tutor to student ratio allows for personalized tutorials and debates.
The toolset of the Athens VS includes but is not limited to Processing and Grasshopper for Rhinoceros, as well as design analysis software.
Participants gain hands-on experience on digital fabrication.
Design seminars and a series of lectures support the key objectives of the programme, disseminating fundamental computational techniques, relevant critical thinking, theoretical understanding and professional awareness.
Applications
1) You can make an application by completing the online application found under ‘Links and Downloads’ on the AA Visiting School page. If you are not able to make an online application, email visitingschool@aaschool.ac.uk for instructions to pay by bank transfer. 2) Once you complete the online application and make a full payment, you are registered to the programme. A CV or a portfolio is NOT required.
The deadline for applications is 28 June.
Location AKTO College – Athens Campus 11Α Evelpidon Street (Pedion Areos) Athens, 113 62, Greece
Fees
The AA Visiting School requires a fee of £695 per participant, which includes a £60 Visiting membership fee. Fees do not include flights or accommodation, but accommodation options can be advised.
Eligibility The workshop is open to current Undergrad and Graduate architecture and design students, PhD candidates and young professionals. Software Requirements: Adobe Creative Suite, Rhino 5.
For more information, please visit:
http://www.aaschool.ac.uk/STUDY/VISITING/athens
http://ai.aaschool.ac.uk/athens/
For inquiries, please contact:
alexandros.kallegias@aaschool.ac.uk…
up structural systems in the parametric environment of Grasshopper. Participants will be guided through the basics of analysing and interpreting structural models, to optimisation processes and how to integrate Karamba3D into C# scripts.
This workshop is aimed towards beginner to intermediate users of Karamba3D however advanced users are also encouraged to apply. It is open to both professional and academic users.
Earlybird (until May 10):
Professional EUR 750 (+VAT)
Educational EUR 375 (+VAT)
Course Fee:
Professional EUR 825 (+VAT)
Educational EUR 415 (+VAT)
Course Outline
Introduction & Presentation of project examples
Optimization of cross sections of line based and surface based elements
Geometric Optimization
Topological Optimization
Structural Performance Informed Form Finding
Understanding analysis algorithms embedded in Karamba and visualising results
Complex Workflow processes in Rhino3d, Grasshopper3d and Karamba3d
Places are limited to a maximum of 10 participants with limited educational places. A minimum of 4 places are required for the workshop to take place.
The workshop will be cancelled should this quota not be filled by May 31st.
The workshop will be taught in English. Basic Rhino and Grasshopper knowledge is recommended. No knowledge of Karamba3D is needed.
Participants should bring their own laptops with either Rhino5/Rhino6 and Grasshopper3d installed. A 90 day trial version of Rhino can be downloaded from Rhino3d.
Karamba3D ½ year licenses for non-commercial use will be provided to all participants.
…
e and i get it. If you have time check the attached papers we published a while ago in relation to the contribution of thermal mass in the reduction of temperature in residential buildings. See the nice contribution of the heavy TM or the lower one for light TM.
As for the solarHeatCapacity, your description (of the 50W) is derived on a 1 Facade/Floor ratio and fully glazed. The only way to reduce it is to increase the ratio (bigger facade area). Which is not recommended (energy losses), but this is a different issue. So, roughly, we can say that 50 is the lower value. If i have less glazing area this number will be higher (right?)
I want to define a value list of "architectural situations", so it is easy to explain and understand. One situation can be:
"Ratio facade/floor 1 & Fully glazed" = 50
"Ratio facade/floor 1 & Half glazed" = 75
"Ratio facade/floor 1.5 & Fully glazed" = 30
"Ratio facade/floor 1.5 & Half glazed" = 50
"Ratio facade/floor 0.75 & Fully glazed" = 70
"Ratio facade/floor 0.75 & Half glazed" = 90
Makes sense for you something like this?
I also defined a value list for the timeConstant like this:
Light Building (Mobile home) = 1Medium-light building (Cement tiles on floor) = 4Semi Heavy Building (Concrete floor + Tiles) = 8Heavy Building (Concrete floors/ceilings + Heavy external and internal walls) = 12
As for the first 5-10 cm effective TM in general my assumption is that you take half of the mass to your space and half to the space above/below you. Will be interesting to do a parametric study on just the thermal mass, uninsulated and insulated to see what the depth limits effectivity will be. Interested in doing such a study together? Can be a nice work even for publishing.
Thanks a lot ... again,
-A.…
393&xg_source=activity
In this case we see a geometrically approach, which doesn’t works efficient, because it required knowing how they behaviors together before, and I think it is not the ‘really behaves’.
To make the structure ‘really behaves’ I tried use kangaroo and the result works very well! As you can see I simply give the 2-set reverse UForce, and then they start to rotate until they found their equilibrium. That means 90 degree rotation. I was wondering what we can do to make a endless-rotation. I am mean 360 degree or more like this:
https://www.youtube.com/watch?v=4owFczeqqMQ
By the way, I try to give supports which allow a horizontal movement only (Just curious how we could keep the anchor-movement horizontally and in the same layer, for example like usual supports for compression ring…). I use the AnchorXYZ, but Kangaroo-Engine seems don’t accept its output.
So maybe some one knows a better solution?
…
Added by Jon to Kangaroo at 7:40am on March 11, 2014
problem later) to fit more shapes that are otherwise won't fit in.
On the example below horizontal rectangle couldn't fit in but its rotated analog could and thus was placed in.
Later, when placed shapes are used to generate frames, because of this rotation, the position of the starting points changes and because of the approach I use to generate the frames some angle values are attached to the wrong corners, this brakes the frame shape and looks like this (on the left the frame of sick shape and on the right the frame of the healthy shape):
Again, this happens because the angle values are assigned to the specific corners (points) and previously rotated shapes get these all messed up:
Easy fix, don't rotate the shapes, problem is, I've already baked a good number of them for later use. I'd like to avoid regeneration because it takes a lot of time and without rotation I constrict the algorithm even more.
Better fix, use a different approach, this is where I'd like to hear suggestions and kicks in a right direction. Please take a look at my definition. It works but I have a feeling like giving an amputee a job of sweeping the floor.
…